|
|
The Trimble® SPS710 and SPS610 Robotic Total Stations help contractors perform layout tasks significantly more efficiently than with conventional mechanical systems for residential and building construction. Designed specifically for concrete and general construction contractors, the Trimble SPS710 and SPS610 total stations offer construction-specific functionality and one-person operation so you can perform all jobsite layout and measurement tasks for maximum flexibility and cost savings.
Applications:
* Layout of control
* Checking or typing into property boundaries
* Layout of excavation lines
* Layout of concrete forms and anchor
* As-built checks
* Layout of control lines on concrete paid for subcontractor
* Light topographical measurements
|
|
|
The Sokkia Series 30R Reflectorless Total Station is able to do pinpoint, high accuracy measurements at locations that are difficult to reach. Measurements to corners of objects, high-voltage electricity wires and a building face survey are examples of the precision this series can offer, all with the convenience of Bluetooth wireless technology.
|
|
|
|
|
|
TRIMBLE R8 GNSS SYSTEM - A BASE AND ROVER RECEIVER FOR RTK GPS SURVEYING
The Trimble® R8 GNSS System is a multi-channel, multi-frequency GNSS (Global Navigation Satellite System) receiver, antenna, and data-link radio combined in one compact unit. It contains Trimble R-Track technology to support all GPS signals, including the new L2C signal and the coming L5 signal of GPS Modernization. It also supports GLONASS.
The Trimble R8 combines advanced receiver technology and a proven system design to provide maximum accuracy and productivity.
From the powerful Trimble field software to the receiver itself, the Trimble R8 GNSS system's overall design has been tried, tested, and proven. As a rover it is rugged, lightweight and cable free for unsurpassed ergonomics in the field. As a base it is flexible and also cable free: use the Trimble R8 as a base or rover according to each job's needs.
The Trimble R8 GNSS system is designed to support Trimble's original Integrated Surveying™ solution. Combine your GPS and optical data in one job file in powerful Trimble field software such as Trimble Survey Controller™. Transfer the job file seamlessly to your Trimble office software for processing.
|
|
|
|
|
|
The Trimble® SPS550H GPS Receiver is a heading add-on receiver that can be connected to another primary Trimble SPS550, Trimble SPS750 (Max) or Trimble SPS850 GPS Receiver so the precise heading from dual Global Positioning System (GPS) antennas can be output. The heading is determined no matter whether the primary GPS is receiving differential corrections or not. This is the ideal add-on receiver for construction projects that require precise orientation of a structure or a vessel-for either placement or for removal tasks.
Features and Benefits:
-Affordable, lower price point of entry for GPS Heading
-No moving parts ensures service-free operation compared to a mechanical gyro compass
-Continuous operation even when primary GPS is not receiving satellite corrections for reduced downtime and increased productivity
-Can be paired with another Trimble SPS550 GPS Receiver, Trimble SPS750 (Max) GPS Receiver, or Trimble SPS850 GPS Receiver for added flexibility and reduced costs
-Dual Site Positioning System GPS receiver mounting bracket, interconnecting cable and antenna included for a compact, rugged system
Applications:
-Dredging and marine piling
-Oil rig positioning
-Rock dumping for sub-sea pipeline construction
-Harbor construction
|
|
An all-in-one model placing importance on mobility in RTK-GPS work. Simple equipment changes RTK-GPS work. TOPCON's unique GNSS technology is naturally incorporated. The GGD and GGDM types can receive signals from the GPS and GLONASS satellites. Stable signal reception under adverse condition and fast initialize time promise an enhanced efficiency of RTK-GPS.
All-in-one GNSS receiver
The GDM and GGDM types contain a receiver, antenna and batteries, as well as small-area radio for reception's are superb all-in-one receivers exceeding RTK-GPS. Just connect the controller to the simple configuration and complexity of cable connection is eliminated. Excellent mobility is assured.
Small area radio contained (GDM and GGDM types)
A wireless modem needed for RTK-GPS is contained. A small area radio with a longer communication distance compared with specified low power radio stations is incorporated. Only a report is needed. License is no longer needed.
|
|
|
|
|
|
The Trimble® R3 GPS system is a complete L1 GPS postprocessed solution from the industry leader in GPS surveying technology. Combining an L1 GPS receiver and antenna, rugged handheld controller, and easy-to-use field and office software, the Trimble R3 system brings precise subcentimeter control to your site, establishes new localized control, and collects topographic data. The system operates without line-of-sight between points, and it can operate day or night in any weather.
The Trimble R3 GPS System offers:
-A unique form factor that works as hard as you do
-Familiar, easy-to-use software in the field and office
-A total surveying solution for L1 GPS
From the field to the office, every component of the Trimble R3 GPS system works together. The system comprises:
-A survey-grade L1 GPS receiver integrated with the popular Trimble Recon™ controller
-Trimble® Digital Fieldbook™ field software
-Trimble A3 L1 GPS receiver
-Trimble Business Center office software - L1 Postprocessing module
|
|
|
|
|
|
Construction grade control and site positioning systems utilizing GPS can use a conventional base station such as the Trimble MS750 set up within about 20 km (13 miles). A single base station can be used by any number of grade control or GPS site positioning systems at one time.
The base station is typically installed at a fixed or semi-permanent location, such as the roof of the site office. It consists of a GPS receiver, GPS antenna, radio and radio antenna.
The Trimble® MS750TM GPS receiver is designed specifically for the tough mining and construction site environment. This ruggedized, dual-frequency RTK receiver outputs corrections with the shortest delay (lowest latency). The modular design, where the radio, radio antenna, GPS receiver, and GPS antenna are separate, provides the customer with many benefits. The GPS antenna can be mounted where the GPS signal is clearest, and the radio antenna can be mounted high, giving the customer broader area coverage with their radio. It also gives the customer security, in that only their antennas are left outside the site trailer, vehicle, or vessel. The expensive GPS receiver and radio are left locked up inside. The MS750 receiver has a front panel display and keyboard, making it easy to configure and start each day, without the need for a specialist controller or software.
The Trimble Zephyr Geodetic dual frequency GPS antenna has a permanent ground plane and has "stealth" technology to reduce the reception of multiple reflected signals (multipath).
The data radio sends GPS information from the base station to the GPS receiver being used as part of a grade control system or site positioning system.
|
|
|
Sokkia's Stratus is an integrated GPS system that combines a 12-channel, L1 GPS receiver, antenna and batteries in one lightweight enclosure (1.75 lb. with batteries). Single-button operation and LED display offer a full range of operational information. Perform static and kinematic applications without switching equipment. And when utilized with Stratus Controller software, you’ll experience versatility in the field and office.
|
|
|
|
|
|
General Construction Lasers
Construction Lasers of the Rugby Series
Work confidently with the Rugby Series General Construction Lasers - self-leveling for jobs of any size, large or small. The Leica Rugby has the features you need to get the job done.
Select the right product for your needs:
Leica Rugby 260SG, 270SG & 280DG
Make the Right Choice! The Leica Rugby 260SG, 270SG and 280DG offer the contractor a real choice of features and functionality.
Leica Rugby 200
Rugged - Dependable - Accurate - Versatile: The Rugby 200 is a heavy duty, horizontal and vertical self-leveling laser. Completely sealed, The Rugby 200 is ideal, inside and out, for both general and interior construction applications.
Leica Rugby 100/100LR
Lasers make faster work of any layout job while eliminating costly errors and downtime. The Leica Rugby 100 and 100LR have become the standard in general construction lasers. Ruggedness, accuracy and reliability have been key to the success of the Leica Rugby.
Leica Rugby 50
Simple, one-button operation, fully automatic, general construction laser. Following in tradition of the Rugby family...
|
|
|
|
|
|
SINGLE GRADE LASERE
- with slope in the X-direction
ML3
The ML3 is a single grade laser. It is built to be strong and robust. The mechanical/Optic unit is mounted in an aluminium housing. The housing has an integrated ergonomical handle for easy positioning.
The ML3 is waterproof (IP 68), and activates a self calibrating feature every time the power is turned on.
The ML3 has special designed optics to obtain a long working distance.Single Grade Lasere ML 3
The ML3 has a click-function control panel with 5 buttons for:
- Increasing the grade (up to 10%)
- Decreasing the grade
- Selection of rotational speed
- Manual/Automatic selection
- Power on/off
The 4 character high intensity LED display gives information about the grade setting as well as working and battery conditions. The ML3 is powered by the widely known standard Makita™ type 7.2 V battery. The battery is very easy to exchange without any tools. One recharge that can be done in one hour, lasts for approximately 30 hours of operation. The ML3 is delivered in a carrying case along with: Battery charger, Battery, Handheld detector HS10.
|
|
|
|
|
|
The Spectra Precision® Laser LR50 Laser Display Receiver is designed to be used as a stand-alone display receiver on grading and excavating equipment including: dozers, excavators, backhoes, scrapers, and box blades. The easy-to-use LR50 features versatile 360-degree laser reception and works with all types of rotating lasers on all types of machinery for fast, no-hassle setup. Rugged and waterproof, the LR50 receiver withstands all weather environments. Internal isolating shock mounts protect the electronics.
Features:
-Built-in blade tilt indicator helps the operators keep the blade level for increased accuracy and productivity.
-Center On-grade provides an equal amount of grade information above and below on-grade. Use on dozers, graders, scrapers and box blades.
-Offset on-grade for productive excavation provides additional above grade information for less undercuts.
-Built-in plumb indicator for fast, accurate grade checking for excavators and backhoe's.
-Up to six channels of grade information plus directional out-of-laser beam indicators.
-Three selectable accuracies meet job tolerances from rough grading to final finishing for maximum flexibility.
-Adjustable, ultra-bright LED with green on-grade display provides user selectable, easy-to-see display to match ambient lighting conditions.
-Use as standalone display receiver or with CB25 Single Control Box for an affordable blade control solution.
-Used with Spectra Precision Laser RD10 Remote Display.
Used on:
Dozers
Graders
Scrapers
Skid Steers
Box Blades
Levelers
Kilvers
|
|
|
|
|
|
DUAL GRADE LASERS
- with slope in both the X- and Y-direction
Laser ML 4ML 4
Rugged design – All ML 4 models are built to be strong and job-site tough. The mechanical / optical unit is mounted in a sealed waterproof aluminum housing. The housing has an integrated handle for ease of handling.
Ease of set up – Setting up the laser is very simple. Just place the laser approximately horizontal, then the automatic self-leveling will correct the beam’s position up or down.
Ease of use – The ML 4 utilizes an integrated LCD display and a touch button control panel.The functions are:
• Grades in both X- and Y-axis.
• Reversing the grade setting (±).
• Rotation (electronic) of optical axis.
• Manual/Automatic selection.
• Lateral adjustment, Left/Right for ML 4V.
• Selection of rotational speed.
Remote control – All ML 4 models come standard with an IR remote control.
Remote control functions are:
• Stand-by.
• Reversing the grade setting (±).
• Rotation of optical axis.
• Lateral adjustment, Left/Right for ML 4V.
Power save feature – Whenever the ML 4 is placed in the case the power is turned off automatically.
|
|
|
|
|
|
MIKROFYN 3D
- Machine Guidance
In short – a MIKROFYN Machine Control and 3D Guidance System will improve your productivity.
It will ensure a more accurate and faster working procedure.
This will result in fever mistakes and reduction of the subsequent costly corrective actions. You will experience that downtime is reduced considerably, that survey costs will drop and that your productivity and best off all – your profit will be significantly improved.
All MIKROFYN Machine Control Systems are prepared for adding on a 3D guidance system comprising a rugged computer, 3D modeling software and 3D positioning of the machine by either RTK GPS or a robotic total station. The modular design of all MIKROFYN Machine Control Systems will enable the user to move a 3D guidance system between different machines, equipped with any MIKROFYN Machine Control System.
A MIKROFYN Machine Control System provides control with the highest possible accuracy. In combination with a 3D guidance system you will gain absolute control of the machine position and attitude in all three dimensions.
|
|
|
|
|
|
The robust Trimble LR400 receiver combined with the GL700 transmitter is designed specifically for earthmoving applications performed with larger machines like dozers, scrapers and excavators. The receiver features center on-grade for use with dozers and scrapers and an "excavator mode" for use with excavators and backhoes. Using the excavator mode, more above-grade information is displayed making it easier for the operator to lower the bucket and cut to the correct grade.
Features & Benefits:
-Large LED display arrows indicate "high" or "low" with amber lights and "on-grade" with green lights so the operator can quickly and easily move the cutting edge to a desired elevation, especially on larger machines such as excavators, dozers and scrapers, for improved productivity.
-Adjustable accuracy bandwidths and distinct modes for specific applications and equipment provide flexibility to meet the machine needs and the accuracy requirements of the job.
-Selectable "on-grade" location and accuracy indicators provide improved efficiency and allow customization of the receiver to each unique application.
-Rugged, waterproof magnesium housing withstands tough jobsite conditions.
-Powered using its own battery or using the machine's battery.
Applications:
Site prep
Building pads
Sewage and storm drains
Landfill sites
Balancing materials
|
|
|
As automated processes are increasing in number and steadily being integrated into new industrial areas, the requirements for industrial sensors are also increasing. Special attention lies on quality, reliability and availability. Our industrial-use sensors are designed to allow easy integrability, but also to provide a maximum in productivity. Equipped with standard interfaces, they may conveniently be integrated into manufacturing lines or host systems.
|
|
Characteristics
Position sensing (also of moving targets) up to a distance of 240 m. With reflector.
Type LE-200
Measuring range 0,2 - 240 m
Resolution (max.) programmable 0,1 mm
Accuracy (typ.) +/- 2 mm
Reproducibility (max.) /- 2 mm
Characteristics
Position sensing of quasi-static targets without reflector up to a distance of 65 m, with reflector up to 500 m
Type LLB-60 D
Measuring range
0,05 - 65 m without reflector
0,05 - 500 m with reflector
Resolution (max.) programmable 0,1 mm
Accuracy (typ.) /- 1,5 mm or /- 3,0 mm according to device type
|
|
|
|
|
|
Vous devez mesurer la distance entre deux cibles ? Ou la calculer par une formule géométrique ? Plus besoin de sortir votre ruban ou votre calculette ; les télémètres laser de Fluke s'en chargent pour vous.
Deux nouveaux télémètres laser Fluke. Les Fluke 416D et 411D sont des télémètres laser professionnels qui conjuguent rapidité et facilité d'emploi et peuvent être accrochés à la ceinture. Ils vous épargnent bien des efforts et vous mettent à l'abri des erreurs de mesure. Un sérieux gain de temps et d'argent en perspective !
Faites confiance aux télémètres laser de Fluke pour mesurer rapidement et précisément la distance jusqu'à la cible, la superficie délimitée par deux longueurs ou le volume avec trois mesures :
Réduction des erreurs d'estimation ; gain de temps et d'argent
Mesure instantanée d'une seule touche de la distance séparant deux objets
Calcul rapide des formules telles que l'aire (mètres/pieds carrés) et le volume
Calcul aisé d'additions et de soustractions de longueurs
Les télémètres laser sont plus performants que les appareils à ultrasons parce qu'ils se basent sur des ondes lumineuses et sur la mesure de leur réflexion pour identifier très exactement les distances :
La technologie de pointe pour la mesure des longueurs
Précision supérieure et distances plus longues
Mesures fiables jusqu'à 60 m, avec une précision de 1,5 mm (416D)
Robustesse et fiabilité inhérentes aux produits Fluke
|
|
|
|
|
|
The most accurate Leica Geosystems laser station
The new Leica TDRA6000 introduces new and improved technology. With an all new direct drive technology, reflectorless measurements and a typical 3D point accuracy of 0.25 mm at 35 meters, this new generation of Laser Station incorporates Leica Geosystems’ long experience developing industrial laser stations.
The new Leica TDRA6000 is the most accurate total station ever designed for industrial use. This new Leica Geosystems laser station has the ability to automatically target both CCR and tape targets and can even measure without targets maintaining a typical reflectorless accuracy of 1 mm. Optimized for use within 300 meters and combined with the Leica Geosystems PowerSearch module, the new Leica TDRA6000’s tracking performance is simply unbeatable.
An all new Leica Geosystems proprietary direct drive technology has been designed from the ground up for this new sensor. Based on Piezo technology, these new direct drives enable high speed motorization and acceleration, at up to 4x the previous generation, but still allow sub micron level fine positioning. This technology has very low power consumption, requires almost no maintenance and is near silent.
Combined with the right software package like DCP05 or Microlog, the Leica TDRA6000 is a top level solution for industrial metrology.
|
|
Especially for great working distances and in tough industrial environments the LDM301 provides a laser distance meter to accomplish fast, accurate and reflectorless measurement of various targets with a reflecting surface. In combination with a target board a measuring range of up to 3000 m can be achieved using the laser-pulse-time-of-flight principle.
Reliable operation even under harsh climatic conditions is warranted by an integrated heating system and IP 67 internal protection class. The LDM301 can easily be integrated into industrial environments and bus systems via standard interfaces.
Applications:
Positioning of cranes, loading and handling equipment
Process monitoring in steel works and rolling mills
Fill-level measurement
Measurement of points that cannot be accessed, for example, inside of cavities
Position monitoring of vehicles or ships
|
|
|
|
|
|
Leica DISTO - the innovative hand-held laser meter for fast and easy distance measurements of length, squares and volumes with the press of a button. Save time and money and emphasise your competence with modern measuring methods.
Leica DISTO A8
The digital viewfinder and the integrated tilt sensor make the Leica DISTO A8 an innovation worldwide and open up completely new possibilities. Comfortably find your target with the three-fold digital zoom made even easier with the blended in crosshairs. The brightness of the greyscales display can be manually adjusted; ideal for poorly contrasting targets! The tilt sensor does not only indicate angles, but also real horizontal distances and various indirect height measurements.
Leica DISTO A6
Bluetooth® data transfer - for a reliable transfer of measured values
Leica DISTO A5
Optimum functionality - with ergonomic design
Leica DISTO A3
Measuring made easy - your robust and reliable partner!
Leica DISTO A2
Precise measurements - fast and easy - fits into every pocket
|
|
Mikrofyn Laser Receivers
A laser receiver system consists of two primary components - a rotation laser and a laser receiver mounted on the machine. MIKROFYN offers just the right receiver for your needs, and they are all very simple to operate.
The MD 40 and MD 10 Laser Receivers can be combined with our various Machine Control systems.
In a number of countries we can also deliver the MD 3 Laser Receiver, which features plum indicators for increased accuracy.
|
|
- Adopting incremental code system and two sides of LCD display plates
- Convenient keypad operation
- Rechargeable battery with large capacity
- Optical centering and laser centering & directing
- Independent tilt sensor
- Superior waterproof and dustproof
- Combined with various models of EDM's to form total station system
- Connected with electronic book makes data to be auto-recorded and auto-processed maps
|
|
Sokkia's LDT520, a 5” digital theodolite equipped with a telescope with laser beam emission capability, boasts the world’s longest laser range, class-topping dust and water protection,and a continuous operation time over 2.5 times that of its predecessor. The LDT520 is designed for directional controls in tunnel excavation, precise marking and alignment in construction and engineering applications.
Major Improvements of Sokkia's LDT520 Laser Digital Theodolite
- A 600-meter laser range, the World's longest laser range as of October 2008
- Dust and water protection of IP66; the top of its class
- Equipped with the market-proven advanced encoders for the highest reliability and lower power consumption
- Longer battery life
- Operable in tighter spaces
- Emits both focused and parallel beams
|
|
The VL102 model laser is designed to be installed on a drilling machine used for strengthening in tunnels. VL102 main function is to identify the centre of the projected drilling cone of the rim to be strengthened.
This reference point, which is pre-established by the topographer according to the design data, is fundamental to carry out a strengthening work which is uniform and homogeneous and consequently more efficient.
The internal structure of VL102 is conceived in order to be able to resist the very highvibrations and mechanical shocks typical of all the drilling machines used for strengthening in tunnels.
The 12Vdc powering allows it to be installed on machines of every brand and type.
|
|
The series FBL91 tunnel lasers are available with 2mW or <1mW power. These are both with 230Vac 50Hz powering. The <1mW version is certified under EN60825-1, Class 2.
The electronic parts are designed in order to resist tension fluctuations that
might happen in tunnels and the optical part is protected by an easy to replace 5mm thick glass.
The internal part of the instrument is designed in order to avoid the inside
formation of vapour.
The FBL91 series lasers use the Halley86 base and have the same
level and instrument centre as the Halley86 series lasers.
This is the best set-up instruments to obtain the same calculation and work for all the Vidalaser instruments.
|
|
The Halley86 series lasers are the result of Vidalaser’s know-how and are especially designed to build tunnels. Nevertheless they can also be used for civil engineering works.
The Halley86 series lasers are available with 3mW and 5mW power and with115/230Vac 50Hz or 12 Vdc supply.
They are a wide range of products which are able to carry out the most specific and difficult operations that can be conceived.
These instruments are strong and resistant to thermic and electrical fluctuations and they can operate for many years without necessity of maintenance.
The Halley86 series lasers are the result of the Vidalaser experience. Vidalaser has been working directly in the tunnel instruments sector since 1975 and is able to offer to its customers assistance and consultancy services that only be offered by a producer can offer them.
The Halley86 series lasers are ideal to drive the TBM.
|
|
Volume Mapping PIV
An integrated solution for mappings in cross-sections of a flow
The Volume Mapping Solution delivers multiple 3D stereoscopic PIV mappings in cross-sections of a flow within a very short time interval, while the integrated software solution controls all PIV system elements and the traverse mechanism.
|
|
|
Automatic identification not only includes the question: "Who am I?" but also: "What do I look like?" SICK's laser measurement systems have the answer to this question. Determination of the shape and loading state of a pallet, or the height of a vehicle before entering the Gotthard Tunnel, controlling robots for the automatic loading of flight baggage, or monitoring the tracks ahead of autonomous goods wagons - laser measurement systems from SICK provide all the necessary information.
|
|
|
|
|
|
GEOSPOT is a tracking device powered by a built-in high capacity Lithium battery, which can be installed outside objects or vehicles in motion. A complete location and tracking system can be created using GTrack software and maps, supplied by request. GTrack software makes it possible to follow the moving target on the map displayed on the PC and to control all the functions of the GEOSPOT tracker.
Main features:
- Very sensitive GPS receiver based on the SiRFstarIII module
- GSM/GPRS quad-band module
- Compact case with IP65 degree of protection with battery and built-in antennas
- Equipped with 4 powerful magnets for fast installation
- Motion and vibration sensor
- Memory for recording positions and events
- Configuration by means of SMS or the software supplied
- RTC for timed and programmed operation
- Battery life up to over 1 year
- Designed and developed for highly reliable operation in a hostile environment
Applications:
- Monitoring of moving objects
- Control of hire machinery and vehicles
- Control of containers
- Prevention of theft and aid in recovering vehicles or property
Software:
- GTrack Lite (supplied)
- GTrack, OnTrack, www.i-scout.it
|
|
Prism Units
1 P Tilt Unit A
(MPU 5A) Prism Constant -30
(MPU 05A) Prism Constant 0
3 P Unit A
(MPU 7A) Prism Constant -30
3 P Shift Type A
(MPU 8A) Prism Constant -30
|
|
|
|
Levels, Theodolites, Distancemeters, ...
