|
|
We deliver a wide range of cylinder types, such as: Double acting cylinders
Single acting cylinders
Plunger cylinders
Double acting telescopic cylinders
Stainless steel cylinders, oli- and water hydraulic
Centre hole cylinders
ISO norm cylinders
Hydraulic cylinders with integreted transducer, inductive proximity switches etc.
Hydraulic cylinders with any integrated valves (build in valves)
Hydraulic special cylinders
DNV type approved hydraulic cylinders
GL type approved hydraulic cylinders
Special piston rod and tube materials
Special mountings
Hydraulic cylinders with special certificate
Special surface treatments
|
|
|
|
|
|
Black Bruin BBR15HD rotator
Durability and efficiency for harvesting heads
Black Bruin BBR -rotator’s unlimited turning angle, excellent load capacity and standard torque throughout the turning range makes harvesting efficient. Built-in pressure relief valves in radial piston motor gives durability and reliability.
Black Bruin BBR15F rotator
Heavy Duty – Grapple rotator
Black Bruin BBR -rotator’s unlimited turning angle, excellent load capacity and constant torque throughout the turning range makes loading efficient. Built-in pressure relief valves in radial piston motor gives durability and reliability.
BBR15HD and BBR15F Rotator
• radial piston hydraulic motor
• high loading capacity in radial and axial direction
• built-in double-acting pressure relief valve
• high pressure level
• multi-disc brake damping
BBR15HD also has:
• all-season sealing
• heavy duty tapered roller bearings
Black Bruin MR rotator
Shows its claws as the loading crane rotator
Black Bruin MR-hydraulic rotator is designed for rotating the beam scoop of a crane. The design takes into account the high external loads they are exposed to. MR-rotator is designed for professional use. MR-rotator is reliable and accurate. You can count on its productivity.
|
|
Honeywell's Hobbs range of halogen and Xenon, high intensity discharge work lamps are designed for use in heavy construction and farming equipment. These lights are designed to withstand harsh environmental conditions such as sudden temperature change, shock and vibration.
High intensity discharge (HID) technology is significantly more efficient than halogen and produces more light with less amperage draw. The technology allows equipment to operate more safely with less load on the electrical system resulting in optimum alternator and battery life.
Honeywell's marine lamps are completely weatherproof. They are totally sealed against moisture ingress and the mounting hardware is stainless steel to prevent rust and corrosion.
|
|
Nordic halogen work lights
Nordic halogen work lights are solid, compact and easily serviceable, that is reliable partners in demanding work and working conditions.
N300 worklights are oval shaped and the reflectors are designed in free-form optics. N100 and N300 lamps are also available as twin power opetion (two bulb).
The Nordic 300 Twinpower bulb system has been equipped with a vibration damper. Super Damp (SD) versions are available for extremely demanding conditions. The patented Nordic Lights super damping system gives long lasting durability against shock and vibration.
N200 lamps are classics of Nordic Lights and are used in many different areas of industry because of their endurance and solid construction.
N100 is a work light which is suitable for locations that require wide illumination. Lamps from this series are also available in flush mount design.
N25 lamps have been designed for machines where space is limited.
|
|
Nordic HID work lights (Xenon)
The Nordic HID (High Intensity Discharge) lamps are designed to withstand the demanding requirements of the mining, forestry, drilling and earth moving industries. Xenon tubes are considerably brighter than ordinary halogen bulbs, which mean that the use of HID lamps saves the alternator and fuel. HID lamps generate less heat, are durable against vibration and shock and last longer than a halogen lamp. HID lamps have great luminous intensity and the light is very similar to daylight, which improves working safety and is pleasant for the operator of the vehicle.
|
|
New heavy duty LED worklight
The N25 LED worklight is designed for
applications, where high service life and
durability is important in extremely tough
conditions.
With its low power consumption and
multi voltage use, combined with
superior illumination and extremely long
life time makes the N25 LED worklight
suitable for most applications in the
industry. The N25 LED worklight is
completely waterproof and vibration
resistant, which gives the most requiring
customer a product that exceeds all
expectations.
|
|
Magnalube-G has a variety of applications and is truly designed for use in any situation. The high quality of Magnalube-G is never wasted on an application that may typically require lower-grade grease. The energy savings and machine part protection that arise in sensitive applications are not lost in other applications. Here is a list of a few of the many applications that Magnalube is specially designed for:
Gears, Bearings & Jack Screws
Actuators
Brake Calipers
Computer Components
Construction Equipment
Railroad Couplings
Die-casting Machines
Electric Motors
Electric Switches
Gaskets
Hydraulic Equipment
Laser Equipment
Medical Devices
Mold Release
Office Business Machines
Pneumatic Cylinders
Pumps
Railroad Engines
Seals, Valves & Gaskets
Tools
Trucks & Trailers
Valves
|
|
|
|
|
|
Features
4000 PSI Working Pressure
Utilizes Standard Components
Piston Design
Four Bore Sizes Available
Patent Pending Swaged End Cap Connections
"Schrader" Style Gas Valve
Heavy Duty Gas Valve Protector
"No Gas Valve" Option
Multiple Hydraulic Port Sizes
Male Threads Available
Spanner Holes
On-Time Delivery
Non-Repairable
Economical
Advantages
Higher working pressure rating meets more applications
Allows for faster delivery of proven designs
Piston design prevents sudden failure of accumulator
Customized to exactly fit the application
Large selection of sizes, capacities
Economical, fatigue tested
Industry standard; will fit existing charging equipment
Protects the gas valve and provides a secondary gas seal
Eliminates use of the gas valve
Prevents users from adjusting pre-charge
Allows for a wide range of hydraulic fittings
Ease of mounting to IHC's
Allows for installation into restrictive spaces
Average five-day delivery on standard designs
Allows for lower initial cost
Cost savings to hydraulic system
|
|
|
|
|
|
A large input shaft diameter allows more through put power, even with an integral charge pump. When the 350 series pump is fully loaded as much as 56 kW (75 hp) of through put power is available for auxiliary hydraulic power needs from the SAE B auxiliary mounting pad.
350 Series pumps operate at a level of quietness that exceeds the requirements of today's demanding work conditions.
Another pump feature - a serviceable, bimetal valve plate - improves pump filling characteristics which, in turn, reduces fluid-borne noise and extends pump life. A highly engineered pump housing and swash plate also minimizes noise and vibration.
Mounting flanges are offered in SAE B and C configurations and ports are offered in SAE, ISO tube and flange and STC direct port versions. Opposite or same side port versions are available to facilitate plumbing and help the pump fit your machine space needs. An integral gerotor charge pump can be provided with up to four different displacement sizes allowing for either remote or inlet charge filter options. The 350 series pump offers a full range of product features and has the ability to match the needs of many different customer platforms. It supports increased power requirements in Agricultural, Construction and Utility markets and allows for a wide variety of installation opportunities for global machine design.
|
|
Why use a variabledisplacement pump?
•precise control of all movements ;
• multi-function capabilities: simultaneous movements, all independant
of load ;
• avoid problems of fluid overheating ;
• reduce energy consumption.
Variable displacement : only advantages !
Installing a TXV variable displacement pump will transform your hydraulic equipment. Slow or rapid movements are done with precision, to the constant adjustment of pump flow rate. The TXV ranges are the result over 40 years' experience in hydraulic pumps. HYDRO LEDUC, France's leading pump manufacturer, is proud to present these high performance products.
|
|
Outrigger pads for truck cranes...
Square models
Joining together all the properties of outrigger pads STABpads, the range mini STABpads is especially conceived for the stabilizers of trucks, small cranes, nacelles…. Its form is studied in order to be positioned on the stabilizer. the operator will have to worry only of the correct positioning at the start of actuation of the jacks.
Extremely practical, you will have only to arrange them on the comb delivered in option.
|
|
Outrigger pads for cranes all types
Circular models
The stabpads : Why are they a must ?
They assure an excellent base of your crane and nacelle
They can be adapted to any surface without causing damages
The charge on the floor is the same all over the surface
They guarantee maximum security and stability to your drivers
They preserve delicate floors and surfaces such as bituminise, flagstone, paving stone, tilling and grass ...
|
|
Bastaings
Joining together all the properties of outrigger pads STABpads
500 x 250 x 100 mm
1200 x 330 x 100 mm
|
|
Bastaings POWER-PADS
CGK-group is manufacturer of outrigger pads for mobile cranes, truck mounted cranes, aerial working platforms, concrete pumps, …
Produced in high quality regenerate materials, our products offer you a work in total security. POWER-PADS are an alternative to wood (rot) and to steel (rust and not transportable).
Several rectangular pads can be assembled to make a support at the height you want.
|
|
PCD Bits
PCD core bits may be used with water, mud, or air flushing. Two main types of PCD cutters are available – the conventional flat design, and the dome. Unlike roller cone bits, PCD bits remove the rock by shearing, and not by crushing or grinding.
|
|
Leica RedLine
The future of construction positioning
From office to field and back again the new RedlLine product range has the perfect solution for all your construction site design and positioning needs: The unique modular system design allows the same sensors to be used across the entire construction site
* Design and data manipulation
* Control establishment
* Base Station set-up (or use network corrections)
* GNSS rover solutions (set-out and as-built surveys)
* GNSS foreman car/quad navigation
* GNSS machine control (more machines covered)
* Tracker machine control (more machines covered)
* Total station surveys (set-out and as-built surveys, one man, two man options available)
All controlled by the same simple user interface designed specifically with the construction site in mind.
|
|
Pilot adapters and reamers
Robit Rocktools Ltd, established 1985, is a Scandinavian manufacturer of high quality rock and ground drilling tools for construction, mining and quarrying.
|
|
Rolling plates
Do not deteriorate any more the lawns, the worked lands, the tiled grounds, the bitumen...
Constitute a way for all your machines thanks to STABplates.
STABplates rolling plates, guarantee optimal protection and safety for work on vulnerable or unstable grounds.
They also allow the creation of usable temporary ground for vehicles and machines by ensuring you with an excellent grip.
Worked out in the same material as the outrigger pads STABpads, they adopt the mechanical properties and the advantages.
Easy handling, light and the integrated handles, will allow you a fast and sure installation.
A kit of fastening (in option) will enable you to bind several plates between them firmly.
|
|
POWER-PLATES
The POWER-PLATES produced by CGK-Group offer you a perfect protection of surfaces and the possibility to create temporary access roads.
Our plates are produced in high quality regenerate materials. POWER-PADS are an alternative to wood (rot) and to steel (rust and not transportable).
|
|
Round outrigger pads POWER-PADS
CGK-group is manufacturer of outrigger pads for mobile cranes, truck mounted cranes, aerial working platforms, concrete pumps, …
Produced in high quality regenerate materials, our products offer you a work in total security. POWER-PADS are an alternative to wood (rot) and to steel (rust and not transportable).
Round outrigger pads are easy to handle (can be rolled)
Standard program 30 to 80T.
|
|
The STAF®, the System of Casing Car-Borer, are a method of
pressure measuring drilling of type TFEM (Tube Split open with
Simultaneous removal of Materials) in accordance with standards NF P
94-110-1 and IN ISO 22476-4.
It is particularly recommended for the installation of the tube
split in the grounds known as of cover or not very homogeneous.
|
|
ABRAMS CONE
The ABRAMS' cone complies with the NF P 18-451 standard. It is used to measure the SLUMP of the concrete
The cone is made of:
- One bottom free conical shape, with 2 handles and 1 fitting device to make the cone stable on the support area.
- One rigid support area.
- Straigh rod.
- Rigid measurement gate. The horizontal upper part has a sliding ruler which can be fixed with a pressure screw.
|
|
Square outrigger pads POWER-PADS
CGK-group is manufacturer of outrigger pads for mobile cranes, truck mounted cranes, aerial working platforms, concrete pumps, …
Produced in high quality regenerate materials, our products offer you a work in total security. POWER-PADS are an alternative to wood (rot) and to steel (rust and not transportable).
Standard program 4 to 90T.
|
|
WESTECH Tailgates are available for all sizes and models of fixed frame and articulated trucks. Our exclusive, patented Torsion Bar Design eliminates the use of protruding roller brackets and long, dangerous chains.
All WESTECH Tailgates are custom engineered and designed to address the characteristics of each hauling application. Volume, loading height, material density, material weight, abrasion, and moisture content are some of the factors that will determine the design of your tailgate. Optional rubber tailgate seals are available for transporting fine grain materials.
All gates are fully adjustable to insure a tight fit and a quiet ride. Sealed bearings, a high strength frame harness, trunnion pivots, and superior wear parts insure that all Torsion Bar Tailgates are low maintenance.
Increase your payload and keep it where it belongs, "in the truck and off the haul road", with WESTECH Tailgates.
|
|
Top hammer
Robit Rocktools Ltd, established 1985, is a Scandinavian manufacturer of high quality rock and ground drilling tools for construction, mining and quarrying.
|
|
The GANTNER tractorwinch is a robust and modern quality product with high reliability, long life, easy and secure operation, for forestry enterprises who need a professional winch.
TraktorwindeAssembly/attached winches are the standard for the combinated land and forestry enterprise.
|
|
|
|
|
|
Mobil Mist Lube Series are extra high performance oils designed for the oil-fog or mist-lubrication of machine components such as slideways, bearings, gears, chains etc. They are formulated from high quality, solvent refined base stocks and a unique additive system designed for optimum reclassifying properties. They have a high resistance to oxidation and good extreme pressure and anti-wear properties. The products have enhanced surface wetting capabilities and they reclassify (or agglomerate) readily from a mist to a liquid when the mist is subjected to extreme turbulence or is impinged onto a surface at high velocity. This allows a lubricating film to form on bearings and gears and prevents stray mist from escaping through narrow apertures into the atmosphere.
The four viscosity grades in the Mobil Mist Lube Series, ranging from ISO VG 32 to 460, allow the machine designer to choose the product most suitable for proper mist lubrication of machine elements. The heavier grades are used on ways, gears, and slow-speed, heavily loaded bearings, while the lower viscosity grades are used in high-speed bearings.
|
|
- Tufgear Universal: Suitable for lubricating all open gears - regardless of size. Water resistant with exceptional load carrying capacity. Operating temperature range -40ºC to +120ºC
- Tufgear Spray: High performance open gear lubricant in aerosol form for all open gears. Water repellent thin tenacious film which resists high loads and throw off. Temperature Range -10ºC to 100ºC
- Tuflube All Weather: Extremely adhesive lubricant with excellent water displacing properties which provides good corrosion protection and long term lubrication. Temperature Range -30ºC to 70ºC
|
|
| ... products without technical information |
| |
|
|
Other accessories for construction equipment
