|
|
| Products 121 to 150 of 202 |
|
Our Long Tom rigs have been around for over twenty years, and are still in demand due to their simplicity and cost effectiveness. Designed to alleviate the negative aspects of hand held drilling and to improve drilling productivity.
|
|
Two-Boom Hydraulic Jumbo MTI-2SB:
DRIFT RUNNER - MTI-2SB
The MTI SB series two-boom Hydraulic rig is designed for drilling vertical, horizontal, and angled holes in under ground production headings. It features two hydraulic percussion drifters, and can drive headings 24'-6" by 18' - 0" (7.5 m by 5.5 m).
|
|
Oldenburg Cannon's line of rock drills, drill jumbos, and roof bolters have earned a reputation for simplicity of use, rugged reliability, and lowest cost per meter drilled.
Jumbos are configured in double and single boom set-ups, with enclosed or open cabs. Each customer order is engineered to meet the needs of the mine plan.
|
|
Terex® MK65 Jumbo Drills
The MK65HE is an electric drill, diesel tram, rubber tired, two boom Jumbo designed to drill drifting holes, crosscut holes, bench holes and rockbolt holes.
SPECIFICATIONS MK65 JUMBO DRILL
Maximum hole depth: 12' 5" (3.81m)
Boom face coverage height: 21.25' (6.48 m)
Boom face coverage width: 35' (10.67 m)
Maximum tram speed: 6 mph (9.60 kph)
Length (depending on feed): 43' (13.15 m)
Width: 7' (2.13 m)
Overall height - Tramming: 8' (2.44 m) w/canopy
Overall height - Drilling: 11' (3.35 m) w/canopy
Maximum gradeability: 35%
Ground clearance: 1.25' (.38 m)
|
|
Track-mounted DH-DC2 (BTRK 2) drill jumbo
The track-mounted DH-DC2 (BTRK 2) drill jumbo with two telescopic drill booms is intended as a universal machine for high-performance drivages in medium to large-section roadways. The crawler base also allows the machine to operate on steep gradients.
|
|
|
Atlas Copco Boomer is a range of high-capacity drill rigs providing the best overall economy, production capacity and well-proven reliability. The Boomer range can meet all your demands from 6 to 206 m2 coverage area. The unique Atlas Copco boom system offers outstanding flexibility and precision to ensure straight-hole drilling performance in high-quality tunnelling and drifting for mine development and production. An extensive range of rock drills is available from 16 kW up to 30 kW impact power.
|
|
DT-17N Remix Truck Features
The DUX Model DT-17N high speed articulated remix truck is only 1.98 meters wide and is well suited to operate in confined workings and small drifts. The ruggedly built DT-17N Remix Truck is used for transportation of concrete or shotcrete.
Remix drum 4.5 / 5.5 m 3 capacity.
Electronically controlled engine reduces fuel consumption and ventilation requirement.
For maximum safety, reliability and low maintenance cost the DUX DT-17N Remix Truck is equipped with four-wheel totally enclosed wet multi disc brake system.
Centralized service points and modular design allow for easy service access and fast component exchange.
Excellent service and parts back-up worldwide.
|
|
Normet offers a large range of mobile concrete transportation equipment to meet the needs of the mining and tunnelling industries. Our transmixers improve safety and productivity in underground works.
Transmixers and agitators come with different sized horizontal or inclined bowls and powerful engines for fast driving speeds. A soundproof operator’s cab is a standard option for sprayers, all transmixers and agitators.
With hundreds units of transmixers delivered worldwide, Normet’s transmixers are proved to be durable and excellent in quality.
|
|
RDH CRETEMASTER—REMIXER
Engine: Deutz BF4L914/BF4M2012C
Transmission: Clark 20000 Series
Carrier: RDH 600R Series
Axles: Clark 176
Electrical: 24 volt
Drum: 4.6 yd³, 5.7yd³, 7.2yd³ (3.5m³, 4.5m³, 5.5m³ )
|
|
Service platforms
AMV Service Platforms are supplied in many configurations. The most popular version is the AMV 10,5. This unit is built on a lorry chassis, it has a maximum working height of the platform floor of 10,5 m. and a lifting capacity of 1500 kg. over the whole working range. It is equipped with four hydraulic support legs. The standard version has a p.t.o. driven hydraulic pump. An electric powerpack can be supplied as an option. Other options are diesel driven compressors and generators for tool operation. All operations are radio operated.
|
|
GIA Utility/Service Truck. Three models are manufactured today i.e. GIA 111 and GIA 211 which is articulated trucks and GIA TT 24 which is a rigid truck. All three models are 4-wheel driven in order to be able to operate in steep inclinations.
The models can be equipped with e.g. boom and basket, scissors platform for ANFO charging, scaling, different kinds of installations and service works. The trucks can also be used as e.g. small dump truck or shotcreting rig. A combination of several equipments on cassettes makes one truck useful in many different applications.
The main feature with GIA Utility/Service Truck is:
• High productivity
• High safety
• Low investment and service cost
• Well known components
|
|
|
|
|
|
Utilift scissors lifts on our famous mining carrier are designed for lifting and installations in mining and low-profile tunnelling. Utilifts are suitable for roof reinforcement work, charging explosives, hanging cables and installing pipes, ventilation equipment, etc. Typical standard options include a side-shift platform, platform tilt, crane, pipe changing equipment, air compressors, an electric-driven power pack for platform hydraulics, ANFO charging kits and helper platforms. The vehicle’s driving ergonomics can be enhanced with an optional, fully enclosed, high-comfort operator’s cab.
Himecs are the product of long-term collaboration between Normet engineers and global tunnelling customers and experts. This has generated a holistic understanding of customers’ lifting and access equipment needs in both hard and soft rock environments. The wide range of Himecs is ideal for medium to heavy-duty load lifting and work coverage in practically any tunnel profile. With a large variety of platform configurations and standard options, they can be perfectly customized for specific lifting applications. Our new platform load sensing system and other built-in man-lifting safety features comply with the latest safety rules and regulations. Himecs are also CE-approved and feature the famous Normet mining carrier.
|
|
Mega-Trac Diesel Articulated Tractor 15,000 lbs. Lift Capacity
Features
* Diesel Engine
* West Virginia Compliant
* Dual Hydrostatic Transmission
* Internal Wet Disc Brakes
* Spring Applied, Park/Emergency Brake
* Stick Steering
* Hydraulic PTO
Options
* Certified Canopy
* Load, Haul, Dump Bucket
* Ejector Bucket
* Spot Drill
* Work Platform
|
|
Items Technical Specifications
Rated weight (kg) 2000
Operating weight(kg) 6000
Rated capacity£¨m§Ù£© 1.0
Max breakout force (KN) 55
Max drawing force (KN) 45
Max.dump height (mm) 2750
Max.dump reach (mm) 920
Min turning radius (mm) 4600
Lifting time (s) ¡Ü5
Total cycle time (s) £¼9
Engine YTO(Luoyang) Diesel engine
Model LR4108G95
Type in line, water cooled, four stroke, direct injection
Rated power£¨KW£© 60
Rated speed£¨rpm£© 2400
Min oil consumption (g/kw.h) 224
Torque-converter model YJ280
Type Three-element, single stage
Transmission box type Full power shift, countershaft type
Wheel base (mm) 2350
Tread (mm) 1500
Overall dimensions (l¡Áw¡Áh) (mm) 5880¡Á2060¡Á2700
|
|
|
Wheel and articulated loader is to be used for loading and delivery of winning from exploitation mine face at the underground mining heading of methane-free mines that mine non-ferrous metals ores and/or mineral raw materials. The loader is equipped with a cabin that ensures protection for the operator seating there; the protection against collapse during vertical stroke with the energy of 60 kJ. The construction enables its assembling in two positions. Good stability and relevant power transmission system enables the use of the said machine to exploit deposits at headings with the longitudinal grade of (in the traffic direction) to 15° and at headings with across grades to 8°.
|
|
Side-dump and dinting loaders
deilmann-haniel mining systems crawler-mounted side-dump and dinting loaders, well known for high-speed drives and effective dinting operations, are powerful tools in mining and tunnelling.
|
|
The R Booster Compressor is an electric powered reciprocating booster compressor.
The R55 Booster Compressor delivers 20.3 cu. Meters (700 scfm) of air at 350 psi (24 bar) discharge pressure with mine air pressure at intake of 90 psi (6 bar).
The R110 Booster Compressor delivers 40.6 cu. Meters (1400 scfm) of air at 350 psi (24 bar) discharge pressure with mine air pressure at intake of 90 psi (6 bar).
|
|
|
|
|
|
Continuous Air Systems' new line of high pressure boosters offers the latest in technology and cost efficiency.
All four models - 375B, 705B, 1125B and 1500B have revolutionized mining efficiency. They can increase penetration of in-hole drilling by 100% or more, and are capable of boosting present mine air pressure up to 350 P.S.I.G., for straighter drill holes, maximum bit life and faster drilling.
Continuous Air Systems boosters offer the latest computer controlled instrumentation, with easy to read gauges and lights for diagnosis of mechanical shut down problems. The 1125B and 1500B feature manual bypass switches which allow operation of any selection of compressors on the unit. This permits continued operation at reduced capacity if any compressors are shut down for maintenance. All boosters are designed to meet your high productivity requirements and come with a two year compressor warranty.
All CAS air boosters have gone through extensive on-site testing. Any necessary modifications were made when the "B" Series of CAS air boosters was released. Recently, Continuous Air Systems amalgamated all divisions of its company into one location, so that everything from production and design to inventory and sales is under one roof.
|
|
# DESCRIPTION
The Orion is a track mounted ITH drill designed to drill with In-The-Hole hammers powered with high air pressure.
# PERFORMANCE
The Orion can be used to drill from 3.5 in (89 mm) to 6 in. (165 mm) diameter holes to a depth greater than 330 ft (100 m). WITH OPTIONS: It can also be used for drilling 8.5 in. (216 mm) holes and occasionally reaming up to 17.5 in. (445 mm) diameter holes with a 12 in. hammer and up to 30 in. (762 mm) with the V-30 raise attachment.
|
|
# DESCRIPTION
The 6200W is a track mounted ITH drill designed to drill with a Wassara hydraulic In-The-Hole hammers powered with high pressure water. The water pump is quoted separately.
# PERFORMANCE
The 6200W can be used to drill with a W80 hammer for 3 1/2 inch (89 mm) to 4 1/4 inch (108 mm) diameter holes or a W100 hammer for 4 1/2 inch (114 mm) to 5 inch (127 mm) diameter holes to a depth greater than 330 ft. (100 m).
|
|
* DESCRIPTION
The LH1 Megamatic is a track mounted drill that is designed to drill with a hydraulic Top Hammer.
* PERFORMANCE
The LH1 drills from 2 inch to 3 1/2 inch (51 mm - 89 mm) , Diameter Long Fan Holes to 60 feet (20 meters).
|
|
# DESCRIPTION
The HAS-100 is a track mounted drill Reverse Circulation drill designed to drill deep and large diameter holes.
# PERFORMANCE
The HAS-100 can drill both rotary bits or with I-T-H hammers. It has been used to drill with a 24 inch (609 mm) I-T-H Reverse Circulation hammer diameter holes to a depth over 1300 ft. (400 m). It can drill up or down holes and has the capacity to drill 30 inch (762mm) diameter hole to a depth of 500 ft (150 meters).
|
|
Drilling equipment
deilmann-haniel mining systems drill jumbos and drilling equipment are the result of a decade-long , world wide employment in underground mining, tunnelling and gallery construction.
The range of drilling equipment comprises drill jumbos for blasthole drilling, mechanized rockbolting and extension drilling as well as long-hole drilling machines designed for mine-gas drainage and strata exploration activities.
Furthermore deilmann-haniel mining systems designs and constructs special drilling machines and systems for mounting on tunnel boring machines and roadheaders.
The modular design of the drilling equipment and components allows perfect adaptation to specialized drilling applications and greatly simplifies assembly and maintenance work.
Rugged, durable and cost-effective deilmann-haniel mining systems drilling machines have been tried and tested around the world under the toughest operating conditions.
|
|
Underground Diesel Generator West Virginia Compliant
Features
* 150 to 300 KW
* Diesel Engine
* Exhaust Monitoring System
* Automatic Fire Supression
* 300 KVA Power Center with 995V, 575V, 480V
* Skid, Rail or Rubber Tire Mounted
|
|
24-42 Belt Feeder
by Highland Machinery
Standard Features:
* Designed for 36", 42", or 48" belts
* Eliminates the Tailpiece
* Belt moves made quick and easy
* Very little maintenance or downtime
* Conveyor driven by existing belt
* Eliminates electric motor on machines up to 320 tons per hour
* Three-way dumping
* Unloading time of 7 1/2 ton car: approximately 24 seconds
Options:
* 20 to 74 HP electric motor for conveyor
* With or without pick breaker
|
|
Crawler Drive Feeder Breaker by Highland Machinery
Standard Features:
* Model CDFB 50 or 56
- Conveyor widths:
50" (1250mm)
56" (1400mm)
* Crawler Drive:
- Planetary torque hub
* Breaker and conveyor drive:
*Hydraulic or Electric
- Electric drive uses a magnetic, torque-limiting coupling to protect conveyor assembly. Both hydraulic and electric drives are alignment free and have no chains to maintain
* PLC Logic Controls
* Up to 1200tph production capacity
* Fire suppression
* Heavy gauge steel frame
Options:
* Attached belt return pully assembly
* Stabilizing jacks
* Auto-lube system
* Chromium carbide deck plating
* Explosion proof
* Other options available upon request
|
|
A. L. Lee Corporation acquired the EIMCO line of Locomotives used in mines, tunnels and construction projects around the world.
A. L. Lee Locomotives - trolley, battery or trolley/battery combination are designed for optimum performance at low cost. They deliver high payloads, shift after shift, with minimal downtime.
A. L. Lee has the engineering expertise to design and manufacture a custom Locomotive to meet your application and duty cycle - 24" to 56-1/2" track gauge, 4 ton to 20 ton, as narrow as 37", height and length to meet your specifications, open or enclosed operators compartment, MSHA approved, battery powered, if required
|
|
Machine Features:
Low Height
Hydraulic PTO
Pneumatic PTO
Rubber Bonded V-Spring Suspension
Remote Uncoupling
Liquid Cooled Wet Disc Brakes
Multiple Unit Control
Jackwalker® & Liftwalker®
Planetary Axles
Convertible Track Gauge
Bolt-on Wheels
Electric Crane
Fire Suppression System
Storage Compartment
Radio Remote Control & Multiple Unit Control
Battery:
4-20 Ton
Solid State IGBT Controls
Onboard Charging
Dynamic and Regenerative Braking
30 to 100 hp (22 to 75 kW) Motors
Easy Lift Out Battery Trays
Diesel:
4-45 Ton
Diesel Engine Meeting the Latest Regulatory Requirements
Powershift Transmission
Diesel Emissions Management System
Trolley:
4-30 Ton
Solid State IGBT Controls
Onboard Charging
Brookville Patented Trolley Pole Mechanism
Battery / Trolley:
4-30 Ton
Solid State IGBT Controls
Onboard Charging
30 to 100 hp (22 to 75 kW) Motors
Easy Lift Out Battery Trays
Dynamic and Regenerative Braking
Brookville Patented Trolley Pole Mechanism
|
|
Locomotives for mining and tunnelling
Since 1950 GIA has manufactured and supplied locomotives for the mining and tunnelling industry all over the world. Today GIA is manufacturing diesel locomotives in a range from 2–45 ton.
The main feature with GIA locomotives is:
• High productivity
• High traction force
• High speed
• Easy to customise
• Different engine alternatives
• Using only well known components
• Easy to operate
• Excellent and safe driving condition
• Easy to service
|
|
|
|
Underground mining equipment 
