|
|
| Products 151 to 180 of 202 |
|
|
|
|
5t Explosion-proof Battery Electric Locomotive XK5-6/90-KBT
5t explosion-proof special usage electric locomotive was developed firstly by XEMC filled the gap of locomotive with explosion-proof special usage .divided into step-less speed regulating and step speed regulating. Thyristor chopper speed regulating was firstly used as well.
The Operating Environment:
For special explosion proof battery powered type electric locomotive.
1. The surrounding air temperature: -20±40℃
2. In most moist month, the average max, relative humidity is 95% (in the same month the lowest temperature is not higher than 25℃)
3. The site for coal mine special explosion-proof battery powered electric locomotive must be in according with the stipulations of 《coal mineral safety rule》
XK—6/90-KBT adapt to ambient condition where gas (methane) and coal exist, to haul mineral, equipments or other locomotive.
Composed by machinery part and electrical part:
1. Machinery parts include frame, running gear, double ceiling, chair, buffer, sands sprinkle, cover plank, buffer etc.
2. Electrical part include resistor, traction motor, pantograph type current collector, inverter, steerage, auto-switch, light, DC explosion-proof power meter, bolt contactor etc.
|
|
BATTERY LOCOMOTIVES(non-flameproof type)
1.75 tonne - 20 tonne
BATTERY LOCOMOTIVES (flameproof type, rubber tired)
4 tonne - 18 tonne
TROLLEY LOCOMOTIVES (non-flameproof type)
3 tonne - 25 tonne
DIESEL LOCOMOTIVES (non-flameproof type)
5 tonne - 25 tonne
BATTERY LOCOMOTIVES (flameproof type, steel wheels)
4.5 tonne - 21 tonne
|
|
Machine Features:
Tonnage Determined by Features Chosen
4 Wheel Steer, 4 Wheel Drive
Rigid Frame or Articulated
Liquid Cooled Wet Disc Brakes
Planetary Axles
Brookville Cradle Arm Suspension
Hydraulic PTO
Pneumatic PTO
Dynamic & Regenerative Braking
Automatic/ Manual Fire Suppression System
250 gallon Diesel Fuel Container
Four 75-100 Gallon Containers (for Engine, Hydraulic, Gear, and Waste Oil)
Hydraulic Crane
Lockable Tool Boxes
Hydraulic Driven Air Compressor
Hydraulic Welder (225 DC amps)
Diesel:
Diesel Engines Meeting the Latest Regulatory Requirements
Diesel Emissions Management System
Powershift Transmission
Battery:
Solid State IGBT Electronics
Onboard Charging
Easy Lift Out Battery Trays
|
|
P1 Maintenance Truck Features
Mobile service station for the maintenance of underground mining equipment.
Work bench equipped with vice.
Ample storage for tool boxes and drawers.
On-board compressor and retractable hose reels for powering pneumatic tools or adjusting tire pressure.
Available with crane for lifting large components or handling tires.
Reinforced bottle rack for oxygen or acetylene. Also available with onboard welding machine.
Also available in cassette configuration.
|
|
Scoop Retrofit to Fairchild Permissible Maintenance
Vehicle consisting of:
* Heavy Duty Jib Crane (4 Ton MAX. CAPACITY)
* Air Compressor
* Hydraulic Oil Tank
* Gear Oil Tank
* Grease Container
* Oxygen and Acetylene Tank Mounts Equipped with Locks
* Storage Areas, Tool Boxes & Vise
* Mobile Fire Extinguishers
* Area Lighting
* Manual Light Switching
* Safety Features
|
|
Machine Features:
7.5 ton
4.5 yd3 Heaped Bucket Capacity
Ejector Blade
Hydraulic Rear Engine Compartment
Automatic/ Manual Fire Suppression System
Extra Wide Bucket
Hydraulic PTO
Diesel:
Alarm for Low Engine/ Oil Pressure, Over Temperature, or Transmission Over Temperature
Battery:
Solid State IGBT Electronic Control System
30 to 100 hp (22 to 75 kW) Motors
Easy Lift Out Battery Trays
Tubular Batteries
Winch
|
|
|
|
|
|
Recommended Seam Height: 32'' - 42''
* 120 Cubic Feet Capacity Center Eject Bucket
* Heavy Duty Steel Frame, 20 Inches High, with a One Year Warranty
* Ball Bearing Center Section with a Three Year or 12,000 Hour Warranty
* on Center Section Bearing
* Expanded and Extended Operator's Deck
* Operator's Compartment Door and Latch Assembly
* Adjustable Canopy with Back Protection
* Ground Based Battery Changing System with Two (2) Trays
* John Deere 1200 Series Inboard Planetary Axles with Wet Disc Service Brakes with a One Year Warranty
* Hydraulic Operated Differential, 4 x 4 Positive Traction Lock
* 28 X 15-15 Tires
* Four (4) Tow Hooks
* Battery Bumper and Lid Protector
* Heavy Duty Adjustable Seat
* 7 - 11 Inch Ground Clearance
* IGBT Controller
* Diagnostic Readout Mounted In Operator's Deck
* Handheld Data Programmer
* Remote Plug-In for Handheld Data Programmer
* Quartz Halogen Lighting System
* Tape Switch
* 50 Horsepower Tram Motor and Gear Reducer
* 16 Horsepower Pump Motor with Two Stage 15/5 gpm Pump
* UVR Trip Circuit Breaker
* Breaker Reset System
* Guard on Controller
* Pressure Side Hydraulic Filter System
* MSHA Approved Automatic Emergency Wet Disc Park Brake System with Service Brake Assisted AEPB System
* Hydraulic Power Take Off
* Hydraulic Jet Fill System
* JIC Hose Fittings
* 4 Inch Bore Steering and 6 Inch Bore Bucket Lift Cylinders
* Four Point Fire Suppression System with Remote Actuators
|
|
|
|
|
|
Recommended Seam Height: 36'' - 48''
* 120 Cubic Feet Capacity Center Eject Bucket
* Heavy Duty Steel Frame, 20 Inches High, with a One Year Warranty
* Ball Bearing Center Section with a Three Year or 12,000 Hour Warranty on Center Section Bearing
* Expanded and Extended Operator's Deck
* Operator's Compartment Door and Latch Assembly
* Adjustable Canopy with Back Protection
* Ground Based Battery Changing System with Two (2) Trays
* John Deere 1200 Series Inboard Planetary Axles with Wet Disc Service Brakes with a One Year Warranty
* Hydraulic Operated Differential, 4 x 4 Positive Traction Lock
* 32 X 15R-15 Tires
* Four (4) Tow Hooks
* Battery Bumper and Lid Protector
* Heavy Duty Adjustable Seat
* 9.75 - 12.75 Inch Ground Clearance
* IGBT Controller
* Diagnostic Readout Mounted In Operator's Deck
* Handheld Data Programmer
* Remote Plug-In for Handheld Data Programmer
* Fuel Gage
* Quartz Halogen Lighting System
* Tape Switch
* 50 Horsepower Tram Motor and Gear Reducer
* 16 Horsepower Pump Motor with Two Stage 15/5 gpm Pump
* UVR Trip Circuit Breaker
* Breaker Reset System
* Guard on Controller
* Pressure Side Hydraulic Filter System
* MSHA Approved Automatic Emergency Wet Disc Park Brake System with Service Brake Assisted AEPB System
* Hydraulic Power Take Off
* Hydraulic Jet Fill System
* JIC Hose Fittings
* 5 Inch Bore Steering and 7 Inch Bore Bucket Lift Cylinders
* Four Point Fire Suppression System with Remote Actuators
|
|
|
|
|
|
Recommended Seam Height: 48'' - 60''
* 130 Cubic Feet Capacity Center Eject Bucket
* Heavy Duty Steel Frame, 25 Inches High, with a One Year Warranty
* Ball Bearing Center Section with a Three Year or 12,000 Hour Warranty on Center Section Bearing
* Expanded and Extended Operator's Deck
* Operator's Compartment Door and Latch Assembly
* Adjustable Canopy with Back Protection
* Ground Based Battery Changing System with Two (2) Trays
* John Deere 1200 Series Inboard Planetary Axles with Wet Disc Service Brakes with a One Year Warranty
* Hydraulic Operated Differential, 4 x 4 Positive Traction Lock
* 35 X 15-15 Tires
* Four (4) Tow Hooks
* Battery Bumper and Lid Protector
* Heavy Duty Adjustable Seat
* 9 - 12 Inch Ground Clearance
* IGBT Controller
* Diagnostic Readout Mounted In Operator's Deck
* Handheld Data Programmer
* Remote Plug-In for Handheld Data Programmer
* Fuel Gage
* Quartz Halogen Lighting System
* Tape Switch
* 50 Horsepower Tram Motor and Gear Reducer
* 16 Horsepower Pump Motor with Two Stage 15/5 gpm Pump
* UVR Trip Circuit Breaker
* Breaker Reset System
* Guard on Controller
* Pressure Side Hydraulic Filter System
* MSHA Approved Automatic Emergency Wet Disc Park Brake System with Service Brake Assisted AEPB System
* Hydraulic Power Take Off
* Hydraulic Jet Fill System
* JIC Hose Fittings
* 5 Inch Bore Steering and 7 Inch Bore Bucket Lift Cylinders
* Four Point Fire Suppression System with Remote Actuators
|
|
|
|
|
|
Recommended Seam Height: 28'' - 42''
* 120 Cubic Feet Capacity Center Eject Bucket
* Heavy Duty Steel Frame, 20 Inches High, with a One Year Warranty
* Ball Bearing Center Section with a Three Year or 12,000 Hour Warranty on Center Section Bearing
* Expanded and Extended Operator's Deck
* Operator's Compartment Door and Latch Assembly
* Adjustable Canopy with Back Protection
* Non-Ground Based Battery System
* John Deere 1200 Series Inboard Planetary Axles with Wet Disc Service Brakes with a One Year Warranty
* Hydraulic Operated Differential, 4 x 4 Positive Traction Lock
* 28 X 15-10 Tires
* Four (4) Tow Hooks
* Battery Bumper and Lid Protector
* Heavy Duty Adjustable Seat
* 6 Inch Standard Ground Clearance for 26 inch Machine Height
* IGBT Controller
* Diagnostic Readout Mounted In Operator's Deck
* Handheld Data Programmer
* Remote Plug-In for Handheld Data Programmer
* Quartz Halogen Lighting System
* Tape Switch
* 25 or 50 Horsepower Tram Motor and Gear Reducer
* 16 Horsepower Pump Motor with Two Stage 15/5 gpm Pump
* UVR Trip Circuit Breaker
* Breaker Reset System
* Guard on Controller
* Pressure Side Hydraulic Filter System
* MSHA Approved Automatic Emergency Wet Disc Park Brake System with Service Brake Assisted AEPB System
* Hydraulic Power Take Off
* JIC Hose Fittings
* 4 Inch Bore Steering and 5 Inch Bore Bucket Lift Cylinders
* Four Point Fire Suppression System with Remote Actuators
|
|
|
|
|
|
Recommended Seam Height: 42'' - 60''
* 120 or 130 Cubic Feet Capacity Center Eject Bucket
* Heavy Duty Steel Frame, 26 Inches High, with a One Year Warranty
* Ball Bearing Center Section with a Three Year or 12,000 Hour Warranty on Center Section Bearing
* Expanded and Extended Operator's Deck
* Operator's Compartment Door and Latch Assembly
* Adjustable Canopy with Back Protection
* Ground Based Battery Changing System with Two (2) Trays
* John Deere 1200 Series Inboard Planetary Axles with Wet Disc Service Brakes with a One Year Warranty
* Hydraulic Operated Differential, 4 x 4 Positive Traction Lock
* 32 X 15R-15 Tires
* Four (4) Tow Hooks
* Battery Bumper and Lid Protector
* Heavy Duty Adjustable Seat
* 7.5 - 9.5 Inch Ground Clearance
* IGBT Controller
* Diagnostic Readout Mounted In Operator's Deck
* Handheld Data Programmer
* Remote Plug-In for Handheld Data Programmer
* Fuel Gage
* Quartz Halogen Lighting System
* Tape Switch
* 50 Horsepower Tram Motor and Gear Reducer
* 16 Horsepower Pump Motor with Two Stage 15/5 gpm Pump
* UVR Trip Circuit Breaker
* Breaker Reset System
* Guard on Controller
* Pressure Side Hydraulic Filter System
* MSHA Approved Automatic Emergency Wet Disc Park Brake System with Service Brake Assisted AEPB System
* Hydraulic Power Take Off
* Hydraulic Jet Fill System
* JIC Hose Fittings
* 5 Inch Bore Steering and 7 Inch Bore Bucket Lift Cylinders
* Four Point Fire Suppression System with Remote Actuators
|
|
|
|
|
|
* 140 Cubic Feet Capacity Center Eject Bucket
* Heavy Duty Steel Frame, 25 Inches High, with a One Year Warranty
* Ball Bearing Center Section with a Three Year or 12,000 Hour Warranty on Center Section Bearing
* Expanded and Extended Operator’s Deck
* Operator’s Compartment Door and Latch Assembly
* Adjustable Canopy with Back Protection
* Ground Based Battery Changing System with Two (2) Trays
* John Deere 1200 Series Inboard Planetary Axles with Wet Disc Service Brakes with a One Year Warranty
* Hydraulic Operated Differential, 4 x 4 Positive Traction Lock
* Goodyear 38 X 16-15 28 Ply Perma Foam Filled Tires
* Four (4) Tow Hooks
* Battery Bumper and Lid Protector
* Heavy Duty Adjustable Seat
* 8.75 – 12.75 Inch Ground Clearance
* IGBT Controller
* Diagnostic Readout Mounted In Operator’s Deck
* Handheld Data Programmer
* Remote Plug-In for Handheld Data Programmer
* Fuel Gage
* Quartz Halogen Lighting System
* Tape Switch
* 50 Horsepower Tram Motor and Gear Reducer
* 16 Horsepower Pump Motor with Two Stage 15/5 gpm Pump
* UVR Trip Circuit Breaker
* Breaker Reset System
* Guard on Controller
* Pressure Side Hydraulic Filter System
* MSHA Approved Automatic Emergency Wet Disc Park Brake System with Service Brake Assisted AEPB System
* Hydraulic Power Take Off
* Hydraulic Jet Fill System
* JIC Hose Fittings
* 5 Inch Bore Steering and 7 Inch Bore Bucket Lift Cylinders
* Four Point Fire Suppression System with Remote Actuators
|
|
|
|
|
|
Recommended Seam Height: 72'' and above
* 180 Cubic Feet Capacity Center Eject Bucket
* Heavy Duty Steel Frame, 30 Inches High, with a One Year Warranty
* Ball Bearing Center Section with a Three Year or 12,000 Hour Warranty on Center Section Bearing
* Expanded and Extended Operator's Deck
* Operator's Compartment Door and Latch Assembly
* Adjustable Canopy with Back Protection
* Ground Based Battery Changing System with Two (2) Trays
* John Deere 1400 Series Inboard Planetary Axles with Wet Disc Service Brakes with a One Year Warranty
* Hydraulic Operated Differential, 4 x 4 Positive Traction Lock
* 44 X 18-20 Tires
* Four (4) Tow Hooks
* Battery Bumper and Lid Protector
* Heavy Duty Adjustable Seat
* 13.5 - 17.5 Inch Ground Clearance
* IGBT Controller
* Diagnostic Readout Mounted In Operator's Deck
* Handheld Data Programmer
* Remote Plug-In for Handheld Data Programmer
* Fuel Gage
* Quartz Halogen Lighting System
* Tape Switch
* Dual 50 Horsepower Reliance Tram Motor and Gear Reducer
* 22 Horsepower Pump Motor with Two Stage 20/5 gpm Pump
* UVR Trip Circuit Breaker
* Breaker Reset System
* Guard on Controller
* Pressure Side Hydraulic Filter System
* MSHA Approved Automatic Emergency Wet Disc Park Brake System with Service Brake Assisted AEPB System
* Hydraulic Power Take Off
* Hydraulic Jet Fill System
* JIC Hose Fittings
* 5 Inch Bore Steering and 7 Inch Bore Bucket Lift Cylinders
* Four Point Fire Suppression System with Remote Actuators
|
|
The New Super Scoop by Highland Machinery
Standard Features:
* Heavy duty frame
* 140 cu. ft. bucket
* Ball bearing center sections
* Ground base battery lifts
* 60 gallon hydraulic oil tank
* Microprocessor contropanel
* Halogen lights
* John Deere Planetary, 4-wheel locking axles
* HMC wet disc brakes
* Certified 3-post canopy
* Extended operator'scompartment
* 6 month warranty
Options:
* Hydraulic winch
* 16,000 lbs fork lift attachment
* Kesler Planetary axles (larger models only)
|
|
|
Atlas Copco offers a comprehensive line of four-wheel-drive articulated LHDs (Load, Haul and Dump) for underground mining and for tunnelling projects. The Atlas Copco line of diesel and electrical loaders ranges from the 3.6-tonne tramming capacity of the ST2D to the 15-tonne payload capacity of the ST1520. All models are available with Atlas Copco's patented SAHR fail-to-safe brake system for reliable braking and for long component life. Additionally, each model includes options that complement the many standard features.
|
|
12 Ton Diesel Tractor on Rubber Tires Model 2400-T
Features
* 24,000 lbs. Gross Weight
* 17,000 lbs. Drawbar Pull
* 16,000 lbs. Interlocking Plate Frame
* 4-Wheel Drive
* Diesel Powered
* 79-150 HP
* 42" OAH
* Planetary Axles
* Pedal Actuated, Tandem Power Service Brakes, Dual Circuits
* 3 Speeds -- Forward and Reverse
* Bi-Directional Seating for Excellent Visibility
Options
* Towing - Both Ends
* Load-Haul-Dump Bucket
* "Scoop" Bucket With Ejector Blade
* Grading Blade
* Forklift Mechanisim
* Winch
* 5th Wheel Attachment
* Hydraulic P.T.O.
* Schedule 31 Certified
|
|
Machine Features:
8-50 Ton
4 Wheel Steer, 4 Wheel Drive
Rigid Frame or Articulated
Liquid Cooled Wet Disc Brakes
Planetary Axles
Brookville Cradle Arm Suspension
Hydraulic PTO
Pneumatic PTO
Dynamic & Regenerative Braking
Automatic/ Manual Fire Suppression System
Diesel:
Diesel Engines Meeting the Latest Regulatory Requirements
Powershift Transmission
Diesel Emissions Management System
Battery:
Solid State IGBT Electronic Control System
30 to 100 hp (22 to 75 kW) Motors
Easy Lift Out Battery Trays
Onboard Charging
|
|
Diesel-powered haulers transport tons of materials and supplies more quickly and efficiently
LRD-214, 224, 226 tow tractor general features:
* Clean-burning EPA Tier 3 (Deutz Tier 2) engines give enough power for the heaviest loads.
* Low-maintenance, heavy-duty, reliable brake system
* Low-maintenance electrical system
* Long-life articulation joint
* Fifth wheel hitch configuration with 150,000 lbs pull rating for plenty of pulling power, matched to your requirements
* Ergonomic operator station with optional enclosed cab reduces operator stress and discomfort.
* Satisfies MSHA Part 7, 75 Outby Requirements.
* Whether pulling material supply trailers or moving longwall shields, increase the number of trips per shift.
|
|
# DESCRIPTION
The Aquila is a hydraulic top hammer production drill mounted on a center articulated carrier design for high mobility in underground mines with ramp access.
# PERFORMANCE
The Aquila can be used to drill from 1 5/8 inch (41 mm) to 4 inch (102 mm) diameter holes to a depth greater than 65 ft. (20m). The range of drilling includes 360° ring of plane from horizontal to 15° past vertical.
|
|
# DESCRIPTION
The Aries is an ITH drill with a booster compressor mounted on a mobile center articulated carrier.
# PERFORMANCE
The Aries can be used to drill from 3.5 in. (89 mm) to 6 in. (165 mm) diameter holes to a depth greater than 330 ft. (100 meters) down hole. WITH OPTIONS: It can also be used for drilling 8.5 in. (216 mm) holes and occasionally reaming up to 17.5 in. (445 mm) holes with a 12 in. hammer and up to 30 in. with the V-30 raise attachment.
|
|
|
Atlas Copco offers a comprehensive line of well-proven highly productive Simba production drilling rigs. With different feed lengths, rock drills and an extensive options programme we can offer the right Simba rig for every application.
|
|
Diesel-powered motor grader clears coal mine roads for faster transportation
RDG-1504C Roadbuilder general features:
* Four cylinder, turbocharged-aftercooled, Tier 3 engines deliver the power to move full blade loads of even wet material quickly.
* Four wheel drive lets you drive easily over broken ground.
* Independent braking systems operate even when oil, air, electrical or transmission pressure fails.
* Hydraulic system for steering and all blade adjustment functions automatically adjusts to increase power and operating cost efficiency.
* Full reversing powershift transmission lets you match speeds to conditions.
* Articulated frame (30 degrees each direction) and front wheel steering allow operator to comfortably maneuver into cross cuts and lets operator choose grading positions.
* Forward facing, center position operator station gives operator clear view of the grading action.
* Moldboard blade is wear-resistant, high-carbon steel with replaceable wear inserts for long life.
|
|
Vehicles for Mine Support
Utilizing a single basic carrier in combination with various working end configurations, BTI's rugged, economical and utilitarian service vehicles support mine maintenance, safety and production functions.
Configured as stand alone service vehicles or as interchangeable Cassette/Carrier combinations these vehicles can be configured as Crane, Fuel/Lube, Pipe, or Mechanic's Trucks, Personnel Carriers and Scissor Lift or other basic service and support vehicles.
|
|
GIA Utility/Service Truck. Three models are manufactured today i.e. GIA 111 and GIA 211 which is articulated trucks and GIA TT 24 which is a rigid truck. All three models are 4-wheel driven in order to be able to operate in steep inclinations.
The models can be equipped with e.g. boom and basket, scissors platform for ANFO charging, scaling, different kinds of installations and service works. The trucks can also be used as e.g. small dump truck or shotcreting rig. A combination of several equipments on cassettes makes one truck useful in many different applications.
The main feature with GIA Utility/Service Truck is:
• High productivity
• High safety
• Low investment and service cost
• Well known components
|
|
Diesel-powered multi-purpose vehicle for fast, efficient material transport or support tasks
A-64 pallet handler general features:
* Interchangeable application pallets on a single chassis, customized for your specific needs.
* Designed for rapid supply and quick turnaround, all with the operator staying safely in the seat.
* Loading, tie-down and unloading done with the pallet on the ground, reducing risk of injury from climbing and from falling objects.
* Optional frame-mounted crane facilitates loading and unloading pallets.
* Single control operation with indicator lights showing the stage of loading/unloading
|
|
MTI-UVTs Underground Utility Vehicles
MTI Optional Carrier for all your underground needs. Contact your MTI representative today to discuss carrier options to suit your specific needs.
# UVT - SL2AL Scissors Lift Anfo Loader
# UVT - WT Water Truck 1350 US gal
# UVT - 1MBL Anfo Loader 1 Manbasket
# UVT - PC12 Personnel Carrier 12 people
# UVT - CT071 Crane Truck Hiab 071
# UVT - MT Mixer Truck
# UVT - FT Fuel Truck 1350 US gal
# UVT - FL Fuel Lube Truck Click Here
# UVT - FD Flat Deck Truck 8 Ton Capacity
# UVT - FLC12 FORK Lift Cassette Truck
# UVT - SL6 Scissor Lift 6000 lbs.
|
|
Need a 3 ton vehicle with the footprint of a 1 ton pickup truck? That is the Oldenburg CXM 300 utility truck.
Oldenburg also builds the UV-6 and UV-11 line of specialty mine trucks, as well as the CAM1 line of mine lift trucks.
|
|
Diesel :
Feature Super Steer:
4 X 4 Drive & Steer
Air bag suspension
4 types of engines offered
Maneuvers easily
Choose from 8-17man SUPER STEER or 2-4 man WASP
Permissible electric :
MSHA Permissible
Explosion Proof
10 HP with 72V DC
Drum, Disc, or Wet Disc brakes
Airbag suspension available
Choose from 2-3 man STINGER- a top seller...or...7-12 Man YELLOW JACKET
Non-Permissible Electric:
8 Different Vehicle Types
Range from 2-man to 12-man
3 Wheel or 4 Wheel
36V, 48V, and 72V available
Spring or Air Bags Suspension
Will modify to any customers' specifications
|
|
PC-3 Personnel Carrier
Where time is at a premium and travel distances long, the rugged Mine-Mate™ PC-3 Personnel Carrier provides a comfortable, rapid transportation system for passengers and material from work places in underground trackless mines.
|
|
|
New 260 Maintenance / Personnel Truck Deutz power Cat full power shift transmission New Holland differential (enclosed wet disc brakes) marsh mellow suspension system
|
|
|
|
Underground mining equipment 
