|
|
|
|
|
|
TD16 Features
The DUX TD16 four-wheel drive, high speed, articulated teledumper brings high capacity hauling capabilities on steep ramps and offers effective loading and dumping in headings as low as 9'-0" (2.75 m).
Clean and rapid discharge cycles are guaranteed with smooth flow dump box profile and 60° dump angle.
Evenly distributed 16 ton payload throughout patented telescopic dump box that retains slurry without leakage between optionally sealed telescopic body sections for excellent load retention on steep grades.
Over 5 MPH (8 km/h) tramming speed up a 15% ramp with full payload.
For maximum safety, reliability and low maintenance costs, the DUX TD16 is equipped with four-wheel POSI-STOP brake system.
Large sized, heavy-duty roller bearing for minimum maintenance, a smooth ride and four-wheel ground contact on uneven terrain.
Large operator's compartment with shock mounted floor for comfort and safety, operator side seated for optimum visibility and bi-directional tramming.
Easy access to all service points.
Excellent service and parts back-up worldwide.
|
|
|
|
|
|
DT18 Features
The DUX DT18 high capacity compact profile articulated four-wheel drive dumper is designed for the transport of ore, waste rock and back-fill on level and steep ramps.
Equipped with hydraulically operated, leakproof tailgate with fully automatic adjustable locking device for excellent load retention of slurry mix on level and steep ramps.
High power to weight ratio assures fast tramming up steep ramps.
Proven Dana SOH powershift transmission and planetary axles.
Fail-safe spring applied hydraulically released four wheel POSI-STOP brake system for long service life.
Large sized, heavy-duty roller bearing for minimum maintenance, a smooth ride and four-wheel ground contact on uneven terrain.
Frames designed and built to withstand high impact and torsional stress associated with mining application, covered by five-year warranty.
Dump body made from impact, wear resistant, reinforced alloy steel plates for extra-long service life.
Clean and rapid discharge cycles are guaranteed with smooth flow dump box profile and 65° dump angle.
Large operator's compartment with shock mounted floor for comfort and safety, operator side seated for optimum visibility and bi-directional tramming.
Easy access to all service points.
Excellent service and parts back-up worldwide.
|
|
Dump Trucks ... compact, sturdy, environmantally compatible
Rear-end dumpers for use in confined space have to meet a multitude of important requirements.
Compact design
High manoeuvrability
Robust construction
Axle-/cab in suspension
Environmentally compatible aircooled and watercooled diesel engines with exhaust cleaning system.
GHH FAHRZEUGE produces dump trucks for mining and tunnelling with loading capacities from 15 to 50 tonnes.
From a loading capacity of 30 t, all vehicles come equipped with a bidirectional cabin. This enables convenient long-distance operation in mines or tunnel construction, giving drivers full backward and forward manoeuvrability without having to turn the vehicle around in confined spaces.
|
|
Bull material transport ... fast and economically
GHH Fahrzeuge produces dump trucks for mining and tunnel industry with loading capacities from 15 to 50 tonnes. Four-wheel drive and articulated steering are standard features of our products.
From a loading capacity of 30 t, all vehicles come equipped with a bidirectional cabin. This enables convenient long-distance operation in mines or tunnel constuction, giving drivers full backward and forward manoeuvrability without having to turn the vehicle around in confined spaces.
|
|
The dump truck MK-A30.1 is the ideal solution for tunnelling. With
the front axle suspension the dump truck has an optimal ground
contact, whether the vehicle is loaded or empty, even high
speeds on bad road surfaces are ensured. The turntable seat
with its bi-directional feature gives the operator the possibility to
work fast in both directions without turning the vehicle in tide
situation or in cost intensive niches.
|
|
The dump truck MK-A50.1 is the biggest dump truck in the
program range of GHH Fahrzeuge. With the front axle
suspension the dump truck has an optimal ground contact,
whether the vehicle is loaded or empty, even high speeds
on bad road surfaces are ensured. The turntable seat with
its bi-directional feature gives the operator the possibility to
work fast in both directions without turning the vehicle in
tide situation or in cost intensive niches.
|
|
The dump truck MK-A40.1 is one of the biggest dump truck
in the program range of GHH Fahrzeuge. With the front
axle suspension the dump truck has an optimal ground
contact, whether the vehicle is loaded or empty, even high
speeds on bad road surfaces are ensured. The turntable
seat with its bi-directional feature gives the operator the
possibility to work fast in both directions without turning the
vehicle in tide situation or in cost intensive niches.
|
|
|
|
|
|
Four Wheel Drive End Dump Truck DT-704
14,000 lbs. (6,363 kg) Rated Load Capacity
4.7 yd³ (3.6 m³) Box Capacity
61" (1.55 m) OA Width
Four Wheel Drive End Dump Truck CDT-1604
32,000 (14,545 kg.) Rated Load Capacity
Containers Sized to Material Density
Containers Sized to Material Density
8' (2.43 m) OA Width
Four Wheel Drive End Dump Truck DT-1604
32,000 lbs. ( 14,545 kg.) Rated Load Capacity
10.8 yd³ (8.2) Box Capacity
84" (2.13) OA Width
Four Wheel Drive End Dump Truck DT-1804
36,000 lbs. ( 16,364 kg.) Rated Load Capacity
13.1 yd³ (8.2-10.1 m³) Box Capacity
94" (2.13-2.39 m) OA Width
Four Wheel Drive End Dump Truck DT-2604
52,000 lbs. (23,636 kg.) Rated Load Capacity
18.6 yd³ (14.2 m³) Box Capacity
110" (2.78 m) OA Width
Four Wheel Drive End Dump Truck DT-3002
52,000 lbs. (23,636 kg.) Rated Load Capacity
18.6 yd³ (14.2 m³) Box Capacity
110" (2.78 m) OA Width
Four Wheel Drive0 End Dump Truck DT-3004
60,000 lbs. (27,272 kg.) Rated Load Capacity
20.7 yd³ (15.9 m³) Box Capacity
120" (3.05 m) OA Width
|
|
|
|
|
|
New 260 Maintenance / Personnel Truck Deutz power Cat full power shift transmission New Holland differential (enclosed wet disc brakes) marsh mellow suspension system
18 Ton Heavy Duty Haulage Truck
490-T18 Truck
Deutz Engine (liquid or air cooled)
Funk Transmission (full power shift)
John Deere Axle
Driver out front, Engine in center
15 Ton Heavy Duty Haulage Truck
490-T15DBA Truck
Deutz Engine (liquid or air cooled)
John Deere/Funk Transmission (full power shift)
John Deere Axle
Driver in center, Engine out front
15 Ton Heavy Duty Haulage Truck
484-T15 Truck
Deutz Engine (liquid or air cooled)
John Deere/Funk Transmission (full power shift)
John Deere Axle
Driver out front, Engine in center
12 Ton Heavy Duty Haulage Truck
474-T12 Truck
Deutz Engine (liquid or air cooled)
Funk Transmission (full power shift)
Ford or John Deere Axles
Driver out front, Engine in center
12 Ton Heavy Duty Haulage Truck
472-T12DBA
Deutz Engine (liquid or air cooled)
Funk Transmission (full power shift)
Ford or John Deere Axles
Driver in center , Engine out front
6 Ton Heavy Duty Haulage Truck
460-T6 Truck
Deutz Engine (liquid or air cooled)
Funk Transmission (full power shift)
Ford Axle
Driver out front
Utility Truck
460-UT Utility Truck
Built to your specifications
From Flat Bed to Personal Carrier
Deutz Engine (liquid or air cooled)
Funk Transmission (full power shift)
Ford Axle
3-5 Ton Haulage Truck
960 Series Trucks
The original Young Buggy
Deutz Engine (air cooled)
Funk Transmission (full power shift)
Ford Axle
Tricycle Steering
|
|
12 Ton Heavy Duty Haulage Truck
474-T12 Truck
Deutz Engine (liquid or air cooled)
Funk Transmission (full power shift)
Ford or John Deere Axles
Driver out front, Engine in center
|
|
18 Ton Heavy Duty Haulage Truck
490-T18 Truck
Deutz Engine (liquid or air cooled)
Funk Transmission (full power shift)
John Deere Axle
Driver out front, Engine in center
|
|
6 Ton Heavy Duty Haulage Truck
460-T6 Truck
Deutz Engine (liquid or air cooled)
Funk Transmission (full power shift)
Ford Axle
Driver out front
|
|
15 Ton Heavy Duty Haulage Truck
490-T15DBA Truck
Deutz Engine (liquid or air cooled)
John Deere/Funk Transmission (full power shift)
John Deere Axle
Driver in center, Engine out front
|
|
RDH HAULMASTER 7.5, 10, 12 TON TRUCKS
Engine: Deutz BF4M2012C
Transmission: Clark 20,000 Series
Carrier: RDH 600R Series
Axles: Clark 176
Electrical: 24 volt
Box 7.5 Ton: 4.5 yd³ (3.4 m³)
Box 10 Ton: 5.5 yd³ (4.2 m³)
Box 12 Ton: 6.5 yd³ (5.0 m³)
Options: Various options available
|
|
|
Atlas Copco offers four-wheel-drive articulated mine trucks for underground mining and for tunneling projects. Tramming capacities range from 20 to 60 metric tonnes with box volumes to match every application's ore density. Each Minetruck features a twin cylinder-raised box as standard equipment. For restricted back heights, choose the low profile version or our patented Teletram box or ejector-type system. Additionally, our SAHR brakes are standard equipment for reliable braking and for long component life.
|
|
PHILLIPS MACHINE Freedom Car - FC25
The Freedom™ Car is a cable-free shuttle car. The battery powered shuttle car eliminates cable handling and haulage route congestion, enabling the use of three or more cars in the mining cycle. This yields increased productivity and less maintenance and safety concerns. The car can handle full-shift operation and payloads up to 19mt. Built with a state of the art traction controller and heavy duty frame construction, the car features a large operator compartment designed for optimum visibility and operator safety.
FEATURES
Ø Solid state electronics
Ø 4.1 pitch conveyor chain
Ø Infinitely variable tram and convey speed controls
Ø Electronic traction differential
Ø Four wheel steering
Ø Full time four wheel drive
Ø Dual 30 Kw traction motors
Ø Operator can be located on RH or LH side of machine
Ø Wet disc brakes
Ø OPTIONAL - Service cylinders
|
|
PHILLIPS MACHINE Freedom Car - FC20
The Freedom™ Car is a cable-free shuttle car. The battery powered shuttle car eliminates cable handling and haulage route congestion, enabling the use of three or more cars in the mining cycle. This yields increased productivity and less maintenance and safety concerns. The car can handle full-shift operation and payloads up to 19mt. Built with a state of the art traction controller and heavy duty frame construction, the car features a large operator compartment designed for optimum visibility and operator safety.
|
|
PHILLIPS MACHINE Freedom Car - FC12
The Freedom™ Car is a cable-free shuttle car. The battery powered shuttle car eliminates cable handling and haulage route congestion, enabling the use of three or more cars in the mining cycle. This yields increased productivity and less maintenance and safety concerns. The car can handle full-shift operation and payloads up to 19mt. Built with a state of the art traction controller and heavy duty frame construction, the car features a large operator compartment designed for optimum visibility and operator safety.
FEATURES
Ø Solid state electronics
Ø 4.1 pitch conveyor chain
Ø Infinitely variable tram and convey speed controls
Ø Electronic traction differential
Ø Four wheel steering
Ø Full time four wheel drive
Ø Dual 30 Kw traction motors
Ø Operator can be located on RH or LH side of machine
Ø Wet disc brakes
Ø OPTIONAL - Service cylinders
|
|
PHILLIPS MACHINE Freedom Car - FC16
The Freedom™ Car is a cable-free shuttle car. The battery powered shuttle car eliminates cable handling and haulage route congestion, enabling the use of three or more cars in the mining cycle. This yields increased productivity and less maintenance and safety concerns. The car can handle full-shift operation and payloads up to 19mt. Built with a state of the art traction controller and heavy duty frame construction, the car features a large operator compartment designed for optimum visibility and operator safety.
FEATURES
Ø Solid state electronics
Ø 4.1 pitch conveyor chain
Ø Infinitely variable tram and convey speed controls
Ø Electronic traction differential
Ø Four wheel steering
Ø Full time four wheel drive
Ø Dual 30 Kw traction motors
Ø Operator can be located on RH or LH side of machine
Ø Wet disc brakes
Ø OPTIONAL - Service cylinders
|
|
CABLE POWERED SHUTTLE CAR
Ø Increased Payload
Ø New Improved Wheel Units
Ø Heavy Duty Unibody Construction
Ø State-of-the-art traction controller
Ø State-of-the-art conveyor controller
Ø Heavy duty frame construction
Ø Features a large operator compartment designed for optimum visibility and operator safety.
|
|
CABLE POWERED SHUTTLE CAR
Ø Increased Payload
Ø New Improved Wheel Units
Ø Heavy Duty Unibody Construction
Ø State-of-the-art traction controller
Ø State-of-the-art conveyor controller
Ø Heavy duty frame construction
Ø Features a large operator compartment designed for optimum visibility and operator safety.
|
|
CABLE POWERED SHUTTLE CAR
Ø Increased Payload
Ø New Improved Wheel Units
Ø Heavy Duty Unibody Construction
Ø State-of-the-art traction controller
Ø State-of-the-art conveyor controller
Ø Heavy duty frame construction
Ø Features a large operator compartment designed for optimum visibility and operator safety.
|
|
CABLE POWERED SHUTTLE CAR
Ø Increased Payload
Ø New Improved Wheel Units
Ø Heavy Duty Unibody Construction
Ø State-of-the-art traction controller
Ø State-of-the-art conveyor controller
Ø Heavy duty frame construction
Ø Features a large operator compartment designed for optimum visibility and operator safety.
|
|
Gemini Bolter
# DESCRIPTION
The Gemini is a Top Hammer, long hole, drill for production drilling and cable bolting scissor platform. It is mounted on a mobile center articulated carrier.
# PERFORMANCE
The Gemini is used for:
· Production drilling 1 5/8 in. (41 mm) to 3 in. (76 mm) diameter holes to a depth greater than 78 ft. (23.77 m).
· Cable bolting with precut multi-strand cables installed through a remote operated cable pusher.
· Drawing
|
|
Compact excavator L520B
Compact multipurpose excavator for mining and shaft construction
specially designed for use in confined spaces
versatile applications by use of add on tools
hydraulic quick coupling system for add on tools
optimized transport dimensions
easy assembly and maintenance
extra wear-resistant design of all components
|
|
Recommended seam height: 30" - 55"
New Fairchild Model 30-26, Hi-Cap XL, Detached Continuous Haulage System with 30-inch conveyors. Equipped with 480/950 Volt AC.
|
|
Shuttlecar
Unlimited haulage capacity
The Shuttlecar offers virtually haulage capacity in tunnels with sections as small as 4 sqm. Regardless of the scope of the round, loading and haulage can always be carried out in a single continuous operation without troublesome car switching.
Three different sizes
Designed to work together with our rail-borne loaders our range of Shuttlecars will allow for truly continuous loading. Muck can be loaded directly onto the Shuttlecar by the Häggloader and then transferred from car to car via the built-in conveyors. Shuttlecars come in three different sizes. The three standard version has a capacity of 9,0 qm (HRST90), 11,5 qm (HRST115) and 14,0 qm (HRST140)
Up to eight shuttlecars can be coupled together allowing for excavation of more than 100 qm of muck without troublesome and time consuming car switching.
|
|
The Dosco M200 Continuous Miner is a low height medium duty, track mounted machine specifically designed for high production rates in a variety of minerals
With over 50 years of experience in Mining Production and Development applications Dosco have designed the M200 to complement thier existing range of Roadheaders
|
|
Less rock in the raw coal means preparation plants can operate more efficiently and the coal will contain less refuse to dispose of above ground. All this, of course, helps make coal mining more friendly to the environment.
Our cutting bits will last longer because the shearer design minimizes out of seam dilution, even under complicated geological conditions, thereby reducing maintenance costs.
Aside from the rock, the continuous miner operator can control each cutter shearer independently to avoid parts of coal seams that contain ash or coal with greater amounts of sulphur.
Bottom line, the Fairchild mining concept will send a better product to the surface.
|
|
|
WIRTH supplies a range of continuous miners for roadway development and room and pillar operations. All machines can be adapted to specific conditions. Standard options include roofbolting equipment, flameproof versions, transformers, remote control, dust control, ventilation, and material transport.
|
|
|
|
Underground mining equipment 
