|
|
| Products 91 to 120 of 145 |
HERDING®-sinter plate filter for surface filtration grant clean gas values of < 1 mg/m³, even with dusts of D50 < 1µm. The matrix consists of sintered polyethylene PE. An additional PTFE-coating gets into the pores of the PE-basic body and forms a micro-porous, non-sticking. This combined material is most extensively chemical resistant. The HERDING®-sinter plate filters are extremely stable in structure, rigid, water resistant and only need low-maintenance. The average useful life of a Herding ® filter can even exceed 10 years.
HERDING® sinter plate filters show a very high efficiency of separation and environmental compatibility. The filters can be recycled without any problems, no toxic waste has to be disposed off.
By using these filter elements in HERDING® HSL-units there is an optimum combination of positive attributes like: compactness, optimum flow behavior, ideal dust emission and an extensive operational safety, resulting from the rigidity of the matrix and of no wear and tear against abrasive media. At regular intervals or at pre-determined differential pressure the filter elements are cleaned on-line by a jet-pulse.
The filter elements are fixed only by a single screw – which makes maintenance easy and saves times. On request antistatic or even special design, e.g. for using cooling lubricants or aerosoles are possible. HERDING®-DELTA-filter are future-oriented; already today they meet what tomorrow’s environment and legislation will require. So in fact the separation efficiency shows a much better value than required by the BIA-certificate, regarding dust classification M. |
|
Our firm has reached a high level of specialization and is especially equipped to manufacture metal filters in stainless steel, bronze and brass wire and in bronze ans stainless steel powder. With over 30 years' experience, our firm can today offer the market many types of filters to solve all types of requirements. There are many fields of application which besides the main function of filtering liquids, may include:
damping discharge noise emitted by pneumatic equipment
acting as flame-cutters
absorbing gas and liquid spills
separating two liquids with different surface tension
COPOR has certified quality system UNI-EN ISO 9001-2000. |
|
| Sediment collecting strainers "Y" and streamlined flow type, manufactured of grey cast iron PN 16, nodular cast iron PN 16/25, carbon and stainless steel PN 40. |
|
Balston® Steam filters that permit direct steam contact with food are now available from Parker Hannifin Corp.
Balston Steam Filters remove 98+% of 0.1 micron particles and 100% of all visible particles from steam. Liquid condensate is removed at the same efficiency as for solid particles. Models are available to handle flow rates of up to 3,000 lbs/hr.
Other benefits of Balston Steam filters include: Reduction in steam condensate mixing with the food products when steam is used for agitating, mixing or cooking; significant reduction in carryover of boiler feedwater chemicals into the food product, causing taste and odor problems; greatly reduced maintenance requirements for valves, cookers, heat exchangers, and other equipment.
Balston Steam Filters are in full compliance with the requirements of the US Food, Drug and Cosmetic Act. They meet the regulations for Indirect Food Additives used as Basic Components for Repeated Use Food Contact Surfaces as specified in 21 CFR Part 177, and Current Good Manufacturing Practices, 21 CFR Part 110. Balston Steam Filters have also been accepted by the USDA for use in federally inspected meat and poultry plants. They are also in full compliance with the 3A Accepted Practices (Number 609-00) for producing steam of culinary quality, and they are in full compliance with the requirements of the Health Protection Branch of Health and Welfare Canada.
|
|
ZANDER Sterile Filters are specially designed to remove all microorganisms and thus produce 100% sterile compressed air. This air can then be used in those processes in which sterility is crucial. The ZANDER Sterile Filter Series "HB" covers a whole range of models, from filters for low air volumes in laboratories or pilot plants to filters for large scale industrial process applications.
--Sterile filter-- for 100% contamination-free compressed air and gases. Sterile filters HB series are sterilizeable in situ using steam up to 142°C for 15 minutes.
Note: it is necessary to dry and prefilter the compressed air before the sterile filter.
Absolute retention rate (air and gases): 0,01 µm.
Recommended temperature range: up to 80°C continuously.
-Standard equipment:
Complete filter including sterile element.
Filter housing made of stainless steel 1.4301 (AISI 304), EPDM housing seal, construction stainless steel inner support, outside polypropylene support.
CE mark in accordance with the Pressure Equipment Directive 97/23/EC (PED) for Fluid Group 2. No CE mark is authorised under Article 3 paragraph 3 for smaller filters. Filters suitable for Fluid Group 1 on request.
--Steam filter-- for the removal of solid particles from a steam flow with temperatures up to 200C. Efficiency at normal capacity: 99,99% (1 or 25). Initial differential pressure at normal capacty: 0,1 bar (D series). Initial differential pressure at normal capacity: 0,025 bar (HS/DPL series). Recommended temperature range: up to 200C continuously.
Standard equipment:
Complete filter including steam filter element. Filter housing made of stainless steel 1.4301 (AISI 304), EPDM housing seal, element made out of sintered stainless steel (D series) or fiberous stainless steel (HS/DPL series). CE mark in accordance with the Pressure Equipment Directive 97/23/EC (PED) for Fluid Group 2. No CE mark is authorised under Article 3 paragraph 3 for smaller filters. Filters suitable under Article 3 paragraph 3 for smaller filters. Filters suitable for Fluid Group 1 on request. |
|
| ATI 3-Layer Filter is a superior dust filtration, EMI shielding filter for minimum air flow requirements. Aluminum extruded profiles surround three layers of aluminum screen and are welded in place. Three layers of wave formed aluminum wire screen, each with a decreased depth are layered together resembling the look of a continuous wave. The combined layers of aluminum screen entrap dust particles. Both sides of the 3-Layer Filter are protected by a rigid grill. Select from Alco-Multi Gasket, a combination of neoprene sponge and monel mesh, Alco-Knit or conductive gaskets for shielding and environmental requirements. Through hole locations are customized for easy surface mount installation with standard 8-32 rivnuts or .203 diameter holes. Plating options enhance shielding effectiveness. 3 Layer Filters can be vacuum cleaned in place, removed and blown with light compressed air or cleaned with mild detergent, ATI 3-Layer Filter is suited for use in enclosures, electronic equipment and portable military control stations. |
|
Clean consistent performance throughout the life of the filter through the use of CMS(CMS - Controlled Media Spacing).
Camfil Farr Megalam Panel Filters provide fine airborne particulate control to meet the requirements of today's high technology cleanrooms, clean benches, and clean air devices. With configuration and performance flexibility, the Megalam Panel will provide the highest level of protection for product processes and personnel.
Each Camfil Farr Megalam Panel Filter includes:
- Micro glass fiber media in efficiencies from 95% @ 0.3 micron to 99.99995% @ MPPS1. The media is pleated using Camfil Farr's Controlled Media Spacing™ technology. CMS™ ensures optimized filter element depth and pleat spacing resulting in minimized configuration losses and low resistance to airflow. · Continuous glass filament separators to ensure uniform pleat spacing and form a rigid self supported media pack. Media-to-media contact, and associated fiber break-off, is eliminated.
- A heavy-duty, lightweight anodized aluminum frame for high-strength and ease of installation. The frame corners are secured with Camfil Farr's exclusive Klip-Lok™ mechanism for module durability and long-term integrity.
- A media pack that is potted on all four sides with Camfil Farr's CamPure™ polyurethane sealant. CamPure is a fire-retardant, thermally/chemically stable, shock-adsorbing polyurethane elastomer sealant, assuring leak-free integrity and low-out gassing.
- Manufacturing in a ISO Class 7 (M 5.5, Class 10,000) cleanroom and testing a ISO Class 5 (M 3.5, Class 100) clean space.
- Testing using Camfil Farr's AUTO-SCAN™ automated leak detection system. Filters are serialized, bar coded, and all data is provided on a label on the filter.
Available in pack depths that include 53mm (2.1"), 70mm (2.8"), and 100mm (4.0"). MPPS, Most Penetrating Particle SizeP. |
|
| Metex has been a supplier to the automotive and small engine industries for over 40 years supplying the first knitted wire mesh supports for the monolithic catalyst element in an automotive converter assembly. Metex coated exhaust catalysts continues our long standing tradition of innovation by offering specialty catalysts and mufflers using knitted wire mesh coated with a variety of precious Platinum metals. Our knitted wire mesh product delivers durability, reduced emissions and decreased backpressure and is cost effective when compared to other substrates. Our designs are customized in a variety of sizes and loadings to exceed the expected performance of your system and meet all applicable emissions and conversion requirements. Our mesh substrates reduce oxides of nitrogen (NOx) as well as carbon monoxide (CO), hydrocarbons (HC) and particulate matter (PM). |
|
| ... products without technical information |
| |
|
|
Air filters, Gas filters
