|
|
High-efficiency manufacturer of air filtration for applications with operating temperatures approaching 750°F. The Camfil Farr F Series Absolute%u2122 professional air filter is designed for special applications with operating temperatures of up to 750° F (400° C).
Usually applied in special industrial ovens for the pharmaceutical industry, the Camfil Farr F Series Absolute may be applied in any situation where HEPA level efficiency is desired at unusually high temperatures.
|
|
Activated carbon filter
Ducon Carbon Absorbers are custom designed to remove odor-causing components such as hydrogen sulfide, mercaptans, organic acids, aldeheydes, and ketones in various industrial and municipal applications. Single bed units are available for capacities up to 10,000 acfm. Dual bed units are utilized for higher capacities
|
|
The equipment made by LTA Industrial Air Cleaning can be divided into four main categories.
Source extraction:
contaminated air is extracted right at the source and cleaned.
Group extraction:
contaminated air from a group of machines is collected and cleaned locally.
Central exhaustion:
air to be cleaned is collected by a duct system, cleaned in a central system, and exhausted.
Industrial room air cleaning:
when operating open machines or to meet strict regulations on air purity, building air cleaning can be used.
Further differentiation of the precipitation
types is possible between
electrostatic or solid media filtration. |
|
Small Flow Professional filters
(35-100 scfm)
Improve the performance and protection of your pneumatics and gas system with PPC's small flow filter line. Our small flow filter line consists of three sizes of "T" type housings designed for flows up to100 scfm at 100 psig. The housings are fabricated using epoxy coated aluminum for the 35 and 60 scfm sizes and epoxy coated carbon steel for the 100 scfm size. They feature our high performance air and gas suppliers of filter cartridges.
Drop away canister access for simple element change-out.
Stainless steel V-band locks head to housing with captive seal for removal and re-attachment.
Buna N o-ring professional seals prevent leakage paths which permit contamination downstream.
Corrosion resistant coatings for longer housing life.
Low housing pressure drop saves dollars (1 psi pressure drop costs, on average, $67 per year per 100 scfm at 6¢ per kWh).
|
|
In addition to standard air cleaners with or without industrial cyclone industrial separators, MAHLE also provides customer-specific professional air filter elements and air filter housings for passenger cars and commercial vehicles. Air professional filter elements of various types are used for filtering the intake air. Metal-free filtering cartridges with efficient filter media and high dust holding capacity guarantee dust efficiency of up to 99.9 percent. Although cellulose media have predominantly been used for filtration in the past, MAHLE has meanwhile introduced new developments aimed at achieving higher efficiency and dust holding capacities. To this end, multi-layer filter materials made from cellulose, meltblown and nanofibers as well as completely synthetic non-woven materials have already been optimized for mass production.
New developments - air cleaners with activated carbon adsorbers
Owing to the statutory requirements of the North American market, HC adsorbers in the air intake are necessary for reducing emissions. In response to this, MAHLE has integrated an activated carbon element in its air cleaner modules. Hydrocarbons are therefore adsorbed which can then escape via the intake system when the engine is switched off.
|
|
Features:
- Four connection holes are incorporated in the frame corners of the clean-air side. Thus the prefilter can simply be plugged onto the already-installed MaxiPleat main professional filter equipped with black connecting pins. The connecting pins engaged in the main filter cannot be removed. The lugged-on MP 45 KTC prefilter can, however, be easily removed again and replaced. Even while the intake air system is actually running, the prefilter can be quickly and securely replaced.
- Velcro fastenings to the main filter make for increased stability during operation. On request, additional metal vices are available, for ensuring secure retention in overhead configurations.
- The entire filter element is metal-free and thus non-corroding and fully incinerable.
- The filter cells are moisture-resistant up to 100% rel. humidity and thermally stable up to 70°C, with temporary peaks of up to 80°C possible. |
|
Mini-Pleat Style Professional filters MicroPleat :
- Ultrafine microglass paper media
- Anodized extruded aluminum cell sides
- Gasket professional seal, gel seal and knife edge models
- Continuous bead mini-pleat professional adhesive separators
- Four efficiencies - 99.97%, 99.99%, and 99.999% on .3 microns;
99.9995% on .12 microns
MicroPleat™ Disposable Ducted Ceiling Modules :
- Anodized extruded aluminum construction
- 2' x 2' and 2' x 4' sizes
- Low profile design - 5" deep. Fits into T-bar ceiling grid
- Fixed or adjustable diffuser/damper
- Three efficiencies - 99.99% and 99.999% on .3 microns
99.9995% on .12 microns
Micro+Plus™ Replaceable Filter Ducted Ceiling Modules :
- Permanent housing with room side replaceable Hepa filtration
- Ducted inlet design
- Extruded aluminum construction or all welded aluminum or
stainless steel construction |
|
Sofilair H13 H14
The Camfil Farr Sofilair H13/H14 is a high capacity Hepa filtering. The glass fibre paper media is ideal for final filtration applications in air conditioning systems.
The Sofilair advantages are:
- High air flow rates, up to 4000 m3 per hour.
- Optimal filtration sequence in cleaning rooms.
- Individual test certificate according to EN 1822.
- New ergonomic handle. |
|
Purolator's family of MICROPAK™ Cleanroom Professional filters provide
a wide range of products for the cleanroom user or the
design engineer.
MICROPAK Cleanroom Filter products have a range of filter
efficiency from 99.99% scan tested at .3 microns to 99.9995% at .12 microns. |
|
PTM sterilizing grade cartridge filters are manufactured for the specific needs of the pharmaceutical industry. Manufactured with inherently hydrophobic PTFE membrane, these cartridges are designed for use in the filtration of aggressive solvents, and as compressed gas and vent professional filters. Each cartridge module is individually bubble point tested using 60/40 IPA and water before it is released from manufacture. The cartridge surface area, filter core design, pleat configuration and pleat packing density have been optimized to provide increased cartridge life resulting in lower filtration operating costs. Rugged construction ensures repeatable steaming and testing. PTM grade cartridges are 100% integrity tested.
|
|
Laird Technologies has a solution to air strainer and Electromagnetic interference shielding in electronic enclosures. The Electro-Air EMI/Dust Filtration Panel, consisting of layered, woven and crimped wire mesh plus filtering media (as needed), captures microscopic airborne contaminants while providing minimal air flow impedance.
The panel%u2019s Emc gasket prevents signal migration to the enclosed sensitizing electronic equipment. When measured according to MIL-STD-285, the panel provides industrial shielding effectiveness in excess of 60 dB for a range of 18 MHz to 1 GHz plane wave.
- Universal applications %u2013 Ideal for small enclosures, large housings, high traffic areas, even room size facilities
- Extensive service life %u2013 Built to outlast the equipment it protects
- Variety of design specifications %u2013 Modular construction is available in assorted standard sizes (from 3 to 18 square inches (19,35 to 116,13 square cm)
- Easy installation %u2013 Pre-drilled through holes or captive fasteners allow for quick mounting and removal
- Simple maintenance %u2013 Washing with mild soap solution, rinsing and drying as often as necessary does not degrade performance
- Design assistance - Laird Technologies%u2019 engineering staff offers technical assistance to help solve the toughest application challenges |
|
| ATI Dust filters are narrow profile EMI dust and industrial air filters. An aluminum frame surrounds aluminum tinsel media and is welded in place. Aluminum tinsel media professional filters the air and entraps dust particles. The aluminum frame and tinsel media combination performs as a gasket. Alco-Knit gaskets are supplied on select extrusion profiles. Dust filters are supplied in standard .172 through hole diameters for easy installation mounting. Depending upon location, filters may be vacuum cleaned in place or removed and blown with light pneumatics or cleaned with mild detergent. ATI Dust Filters are primarily used at air intake locations requiring narrow space limitations to entrap dust particles, shield and cool air flow. |
|
Type DPGT Pleated Panel Professional filters:
- Blend of multi-denier synthetic fibers
- Reinforced die cut beverage board frame
- 30 - 35% efficiency, MERV 8
Filter Media Pads:
- Fiberglass (2", 4")
- Synthetic (2") |
|
Camfil Farr provides solutions for the control of particulate, noise, heat, moisture, weather, and ice in power systems involving gas turbine technology. We provide complete systems for the protection of gas turbines in all environments. Applications include land based and offshore.
To learn more about Camfil Farr's power systems products, visit our Power Systems website.
Inlet Filtration solutions include ducting, mounting hardware, and professional air filters. Our air industrial filters cover all requirements, including prefilters, high-efficiency filters, Hepa filters, and pulse filters. |
|
| Self-supported pocket and cube professional filters are made with a high integrity, high loft polyester media that resists moisture, will not sag, and is extremely durable. They offer low resistance and high dust holding capacity for long service life. The filters are self-gasketing and self-sealing to prevent leakage and bypass. They install with no clips or industrial latches. |
|
| Camfil Farr has an extended range of medium efficiency prefilters, which are adapted to the demands of the various local markets. The range consists of (pleated) panel professional filters with cardboard or metal frames, bag filters, rolls and pads and professional fan coil filters. All of them are produced according to the highest Camfil Farr standards. |
|
Baghouse Filter
Ducon supplies pulse-air and reverse air type baghouse professional filters for industrial and utility applications. Over the years Ducon has provided hundreds of successfully operating installations for a variety of industries, such as: coal, cement, steel, power, mining and chemical. Ducon's Bag filters are state of the art, high efficiency, modular filters designed to handle gas volumes from several hundred to several thousand cubic feet per minute. All Ducon Bag Filters are custom designed for optimum air-to-cloth ratios, longer bag life and higher particulate removal efficiencies. For large power plant specifications application Ducon supplies reverse air baghouses utilizing 35 feet long bags. Ducon can provide bags with a wide choice of materials including: Polyester, NOMAX, Acrylic, Teflon, Glass, Ryton, fiberglass, or sintered metal. Ducon baghouse can provide over 90% mercury removal from coal-fired professional boiler exhaust gases.
Features
- MODULAR DESIGN
- OVER 99.9% EFFICIENCY
- TOP OR SIDE BAG REMOVAL
- POLYESTER, NOMAX, RYTON AND FIBERGLASS BAGS
- SINTERED METAL BAGS FOR UPTO 1500 DEG F TEMP.
- NO INTERNAL MOVING PARTS
- CORROSION RESISTANT CAGES
- LONG BAG LIFE GUARANTEE
- RUGGED CONSTRUCTION
- EXPLOSION VENTS DESIGNS
- DURABLE CASINGS & QUICK ACCESS PROFESSIONAL DOORS
- PLC CONTROL CLEANING
- MINIMUM SITE PREPARATION
- BIN VENTS FOR CONVEYING
- DOUBLE DUMP COCKS FOR MATERIAL DISCHARGE
- REPLACEABLE BAFFLE PLATE
- TURN-KEY INSTALLATIONS |
|
| The filter media of the Viledon Compact pocket professional filters are made of break-resistant synthetic-organic fibres and microfibres - no glass fibres. The filter pockets are leak-free welded and foam-sealed into the front frame to preclude dust breakthrough. High dust holding capacity and long useful lifetime are ensured by the progressive or 3-layered progressive structure of the filter media as well as the inherent rigidity of the filter pockets. The low average pressure drops and optimised aerodynamics together with full utilisation of the filtering area available result in reduced energy costs. Viledon Compact pocket filters ensure maximised functional reliability even under temporary overloading and are maintenance-free over their entire operational lifetime. They are non-corroding, moisture-resistant up to 100% relative humidity, thermally stable up to 70°C, with temporary peaks up to 80°C, and disposal-friendly. Viledon Compact pocket filters are microbiologically inactive and meet all hygiene requirements for HVAC systems. |
|
| The filter type FBI is a filtering unit with a professional counter current industrial cleaning system employed to separate pulverized solid products, which are suspended in the air or in other gaseous products. The filter is equipped with a tank to accumulate pressurized air and the sleeves' cleaning system, both contained inside the filter body. The cleaning system is controlled and managed by a cyclic electronic timer with a ?P incorporated. The filter is supplied with the work and pause sequences programmed and may be reprogrammed according to the client's requirement. It is also equipped with a three digit display to visualize the inlet differential pressure. The efficiency of the filter type FBI is within the values prescribed by the current anti-pollution italian law (d.P.R. 203/88). Its construction is also in conformity with european directive and italian law (d. Lgs. 277/91) On noise reduction in the working environment. The filter shape is cylindrical with the sleeves' extraction from the top. Its engineering is a result of the research and experience in the dry filtering with the use of sleeves and optimization of space in the plants. The air-product mixture is suctioned in the filter. The heavier product particles drop to the bottom by gravitational force whilst the lighter rise to the top and are filtered by the filtering sleeves wich are supported by steel frames. All professional filters may be executed in carbon steel, stainless steel Aisi 304 or Aisi 316, and aluminium. |
|
The Purolator SERVA-PAK professional filter is an extended surface
high capacity industrial air filter composed of individual dust holding pockets assembled in a metal support frame.
Available in a variety of filter efficiencies, sizes and capacities,
the SERVA-PAK filter allows maximum performance in given applications. |
|
Our firm has reached a high level of specialization and is especially equipped to manufacture metal professional filters in stainless steel, bronze and brass wire and in bronze ans stainless steel powder. With over 30 years' experience, our firm can today offer the market many types of filters to solve all types of requirements. There are many fields of application which besides the main function of filtering liquids, may include:
damping discharge noise emitted by pneumatic equipment
acting as flame-cutters
absorbing gas and liquid spills
separating two liquids with different surface tension
COPOR has certified quality system UNI-EN ISO 9001-2000. |
|
This after-filter retains polluting particles thanks to the following main filtration effects: diffusion, inertia and direct interception.
It is recommended for those machining processes producing fine mists from soluble oil mixed with dusts (especially of conducting materials: e.g. cast iron processes, pressure die-casting etc.).
Our after-filter is available in various models with two different levels of efficiency:
EU9 and EU13. The last one is able to retain also some smokes.
The fibreglass after-filter can be used in combination with the three kinds of industrial air filters (turbine single and double wringer) and with all our modular filtration units.
|
|
| HANDTE absorption gas scrubbers are constructed in various sizes for exhaust air flow rates ranging from 800 to 120000 Bm³/h. They consist of a packed tower scrubber with a 1500mm tall absorption zone, an integrated scrubbing liquid professional tank and an immersion pumping with dry-run protection and complete professional pipe fittings. The professional fan can be top mounted or installed as an auxiliary unit. |
|
|
|
Air filters, Gas filters
