|
|
| Products 121 to 150 of 229 |
A modular design oilmist filter system where it’s flexibility allows for expanding and adapting to changes in machine tool processes.
Mix and match flexibility to tailor-make your system depending on application criteria.
|
|
Air filter for mists and vapours from soluble or neat oil for machine tools.
The DARWIN series, patented and available in 4 models, covers throughput range of 600 to 3.000 m³/h. This means that it can cope with widely differing applications, from small lathes to grinding machines or complex machining centres.
Darwin with turbine (T): filtration of air containing soluble oil mist with the presence of heavy particulate.
Darwin with single-centrifuge (M): filtration of air containing mists of soluble and neat oils with presence of small quantities of particulate.
Darwin with double-centrifuge (D): filtration of air containing mists and vapours of soluble and neat oil with presence of small quantities of particulate. |
|
Gemini represents the perfect solution for all cases where the customer in little spaces has the need of both a pre and post-filtration.
Thanks to the compact shape, Gemini adaptes very easely to all type of machine tools.
Gemini is supplied with a prefiltration stage and another filter with specific efficiency depending on the needs of the customer (>95% or >99,95% - Norms CEN EN 179/1822).
GEMINI has a particular design, already patented, which makes maintenance operations and filters replacement very easy.
Gemini is really customizable in fact it is possible to have different combinations of filters depending on the desired efficiencies and maintenance intervals even after the first installation.
|
|
The DELTOLE® is an oil mist collection unit which purifies and cleans the air in
working areas, decreases fire risk hazards and operator accidents and increases
productivity. It is especially recommended for all metal processing applications.
OPERATING PRINCIPLE
The DELTOLE® uses 4 fundamental principles to trap oil particles :
• The oil mist is separared by the fan impellor or by a cyclonic
system which allows the majority of oil particles to coalesce.
• The inertia force ensures that the droplets formed in this way are
retained and then migrate to the collection tank through a wire
knit filter.
• The diffusion forces with “Brownian” motion deal with the very
fine particles by means of a high efficiency filter used as an
option instead and in place of the last standard final filter.
• For use without recycling, a multi-layer wire knit filter can be
substituted for the final filters. The oil collected by the filter is
continuously evacuated by means of a siphon. |
|
Purifies the air in working environments in which blankets of oily smoke are created.
Mechanical industries, machine-tool environments. |
|
The oil mist separator for tough applications
Petra is specially designed to handle applications having high degree of solid particles, such as grinding and polishing applications, machining of cast iron and heat treatment (quench oil) applications.
Petra has a capacity of 700 cfm (1,000 m3/h) and can easily be installed on the top of the machine tool it is suitable for most machine tools. This saves floor space and unnecessary pipe work and unnecessary maintenance on pipe, which is quite important in these types of applications, where allot of solid particles deposits in the pipes. It also makes it easier to move the machine tools when production requirements change. |
|
Emma is the big sister in the 3nine product family. Emma was designed specially for applications where a high air flow is essential, for example on very large or open machine tools.
Emma has a capacity of 1800 cfm (3000 m3/h). Multiple Emma's can be interconnected using the 3nine modular system to create a solution for flow rates above 1800 cfm (3000 m3/h). |
|
Lina is the smallest oil mist separator in the 3nine product family. It was specially designed for small, enclosed machine tools, where the need for extraction vacuum is limited.
Lina has a capacity of 350 cfm (500m³/h) and is mounted on each machine tool. This saves floor sopace and unnecessary pipe work. It also makes it easier to move the machines when production requirements change. |
|
Clara is 3nine's best-selling oil mist separator. With a flow rate of 700 cfm (1,000 m³/h) it is suitable for most machine tools. Clara has been fitted to practically every type of machine tool for numerous customers in Sweden and elsewhere in Europe.
Clara operates solely on the centrifugal separation principle and therefore requires very little maintenance. Clara does not clog up like a filter - even under extreme conditions with high solids loading, such as the machining of casing and in grinding applications. |
|
Oil and Water Vapor Adsorbers (25-2,200 scfm)
Oil vapor can be very detrimental to many products and processes including food, pharmaceutical, instrument, hospital and electronics applications. In these cases an oil adsorber should be installed downstream of both lubricated and non-lubricated air compressors as hydrocarbon vapors are found in ambient air and can be concentrated in the compressed air stream. Oil adsorbers use a charge of activated carbon to remove unwanted hydrocarbon vapors. These adsorbers can be used as single tower water vapor adsorbers with a charge of activated alumina.
Stainless steel diffuser and adsorbent support screens for superior corrosion resistance.
Down flow design for less fluidization and longer adsorbent life.
ASME section VIII designed, manufactured and stamped (where applicable) for certified quality assurance
Specially selected carbon and aluminum adsorbents for low pressure drop.
Separate fill and drain ports for ease in adsorbent replacement.
|
|
AirClean Systems PCR Combination Workstation
AirClean®Systems PCR workstations with UVTect™ microprocessor control, allow you to maintain a Class 100 clean work area during PCR preparation. The AC600 Series LFUV Model has a built-in 254 nm ultraviolet light that allows the operator to irradiate tubes, flasks and pipettes between amplifications. The 254 nm ultraviolet light will effectively destroy potentially contaminating DNA and RNA within minutes. UVTect™ monitors the life of the bulb to ensure proper levels of irradiation.
The workstations feature a unique interlocking sash with a safety overlap to prevent gaps. The sash also has a safety switch that automatically turns off the ultraviolet light and activates the blower and fluorescent light when the sash is raised. This revolutionary uni-body design provides unmatched user protection from harmful ultraviolet rays during the sterilization process. HEPA filtered units have a built-in monitoring system to alert the user when to change the HEPA filter.
|
|
BIGNEAT's PCR UV workstation efficiently protects against contamination by bathing PCR aparatus in sterile air and limiting the risk of contamination from the operators arms, or from equipment bought into the otherwise sterile environment.
Powerful UV lamps are combined with optical reflectors to ensure uniform intensity distribution of the sterilising UV radiation.
1. Superb all round vision
2. Electronic filter saturation indicator
3. Quiet operation
SPECIAL BIGNEAT FEATURE: Fan speed increases when door is opened to maintain air velocity to 0.45 m/s at the front access aperture.
Available 800mm wide as PCR UV cabinet, or as a UV sterilisation cabinet (no HEPA filtration) |
|
The Kermel Tech fibre has been specifically developed to cope with ever increasing thermal and chemical requirements in the field of hot gas filtration.
Kermel Tech offers exceptional resistance to both long-term elevated operating temperatures as well as shorter term high temperature peaks. It guarantees long service life and reliability of filter bag dust removal systems under rigorous conditions. |
|
The electrical Defensor Mk5 steam humidifier is designed to meet the highest requirements in control accuracy and operation with drinking water or fully-deionised water. It is used for the fully-automatic generation of depressurised, mineral-free and hygienic steam The Defensor Mk5 can be connected to all commercially-available humidity controls and humidity sensors.
The unique, patented lime management system enables easy and rapid servicing during extremely long operating cycles. |
|
Metex OPTI-MESH™ Mist Eliminators are available in a variety of styles and configurations designed to match your process. Styles range from very course or "open" mesh designs to very fine or tight mesh designs.
Mist eliminators maintain the integrity of the plant by capturing fugitive liquids and returning them to the process. Wire mesh mist eliminators are the most commonly used type. They have no moving parts and require little, if any, maintenance. They are available in a broad range of styles, sizes and shapes. Wire mesh mist eliminators are, made slightly oversized and compress to fit snugly into your vessel. This ensures that a good vapor seal is achieved. They can be made from just about any materials as monofilaments, multistrand or multifilament designs.
Wire mesh mist eliminators rely primarily on physical IMPACTION of the droplet onto a fine wire to remove liquid entrained in vapor streams. As the droplet approaches the wire, its momentum will keep it in a straight line than the vapor going around the wire. If the momentum is high enough, the droplet hits the wire, wets it and drains along the wire to where it encounters other collected liquids. |
|
Smoke 'n Go Smoke cabins
A quick smoke and back to work. That is the idea behind the Smoke 'n Go Smoke Cabins. Freestanding, easy to locate anywhere to facilitate a break for smoking near the place of work.
- Extremely efficient method of removing unwanted tobacco smoke.
- Splendid and elegant design.
- Cabin is available in various sizes.
- Open as well as closed models (with sliding doors) available.
- Odourless ashtray for several thousands of cigarette ends.
- No changes to the existing air treatment system are needed.
Specifications Smoke 'n Go Smoke cabins:
- Unique filter system, certified by TÜV and ECN, consisting of a prefilter, an ElectroMax filter, a HEPA filter and two activated carbon filters to adsorb both gasses and odours.
- The standard version of the cabin has transparent walls and is provided with lighting. Other colour schemes can be accommodated on request.
- Various sizes: for 2-3, 4-5, 6-7 and 12-14 persons.
- Options are a lit display and foot-and lean-to supports
- Automatic start/stop
- Push/pull system preventing any smoke to linger.
- Filtration: 99,99% of all harmful tobacco related gasses and particles (e.g. nicotine and formaldehyde).
|
|
JS' range of steam humidifiers includes electrode boiler, resistive, gas-fired, steam-to-steam, high temperature hot water-to-steam and live steam systems.
All available with expert advice as to product selection and back-up by one of Europe's largest humidification engineering divisions. |
|
AT 3000
The AT 3000 series is Nordmann's top line. Four different sizes of casing are available, making a total of 10 basic types covering 4 - 130 kg/h of steam production to meet a variety of steam production.
Advantages of the AT 3000 series at a glance:
Program level
Service level
patented Self-cleaning with SC system
Anti-foam system
Stainless steel casing
RS 485 interface
integrated humidity controller
Remote indication relay for collective messages
Simple, rapid Installation
|
|
This type of humidifier is fed by steam from a main supply rather than being generated locally by a self-generative unit.
An effective system which ensures :
- High steam output per metre of lance.
- Very low noise levels.
- Simplified duct and piping requirements.
- Close spacing where multiple lances are needed.
- Low steam ejection velocity for efficient air / steam mixing. |
|
Assembly in dihedron:
In the case of important flows, the cells type 16 and KNOWN thickness 38 and 50 mm can be gone up in dihedrons. Frontal surfaces are then reduced in a ratio from 3 to 1. The cells type 16 equipping the dihedrons are provided with handles (contrary to the cells KNOWN cut-rate version).
Dihedrons MIOFILTRE are superimposed easily to constitute "plates support" or "boxes". |
|
Wet Approach Venturi Scrubber
This Ducon unit features a wetted wall inlet which eliminates wet-dry line build-up and permits direct recycle of high-solids liquid. Scrubbing liquid is distributed over a weir or shelf - no spray nozzles are used. The Venturi is teamed with a mist eliminator for efficient entrainment separation.
Advantages
Over 99.9% + collection efficiency into sub-micron range
No wet-dry inlet: build-tip
Venturis up to 80 in. of pressure drop available
Adjustable venturi throat (manual or automatic)
No spray nozzles or distribution jets
Slurries with high solids can be recycled
Non clogging
Water level control not required
Handles high inlet gas temperatures
Optional packed tower section: for gas absorption
Various construction materials such as Inconel, Hastelloy, 317L
S.S., and FRP available: for corrosive applications
|
|
Silence means quality of life. That’s why any noise should be eliminated in houses or flats to the extent possible. The FRIAPHON noise-insulating in-house wastewater pipe system reduces the sounds coming from wastewater lines to a level no longer perceived as disturbing. The system complies with all current provisions governing sound insulation and fire protection. Certainly, the system also meets all requirements in terms of temperature resistance and lifetime defined in standards and regulations.
Clean Wastewater – The Range of OEKOMAX Grease Separators
As a result of ever-increasing environmental awareness, the disposal of separated oil and grease as well as food residues gains more and more in importance. Set limits must be complied with under any circumstance. OEKOMAX grease separators efficiently protect the public sewerage system and relieve sewage treatment plants - and thus help save resources and costs. |
|
The JetSpray humidifier combines compressed air and water to produce fine sprays of moisture that immediately evaporate to raise the humidity to the desired level.
It can be fitted inside an AHU or duct, or directly in the space to be humidified.
The system requires very little energy to operate, has the lowest compressed air consumption of any similar system in the world and due to its self-cleaning nozzles requires very little maintenance. |
|
The Condair Fast Fog high-pressure humidifiers are applied for the humidification of supply - and re-circulated air in industrial, commercial and public buildings. Due to the high humidification efficiency the Condair Fast Fog is also used for adiabatic cooling of exhaust air in air conditioning systems.
|
|
The Cappa (Wet bench) of service or process constructed in polypropylene standard, is a protective device for the acid manipulation or other substances chemistries, the same one is equipped with system of aspiration (with attack to the cetralized aspiration) that it guarantees the incolumità of the operator during is made inside of manipulation of the room, of process or washing.
In the cappa an illuminated cabin is distinguished where the bathtubs are located, the whose varied number according to the process, of the dimensions and the requirements
of the user.
The cabin is protect front from two slabs in plexiglass of thickness 8 milimeter, commant electrically.
The process, or the washing, entire is commant by means of a interfacciato monitor touch screen to a PLC.
The cappa entire constructed in polypropylene standard.
For further information to contact the Fluorosat srl
|
|
|
|
Air treatment and air filtering equipment
