|
|
|
The BDC Series of dust collectors are ideal for industrial processes such as bin venting and raw material handling. Compact in size, this baghouse-style system can be installed inside or outside; while minimizing the occupation of valuable floor space and offers easy access for filter maintenance.
|
|
AirClean Systems Class I Biological Safety Hood
Constructed from all white seamless polypropylene, AirClean® Systems horizontal laminar air clean benches are the ideal solution for Class I biological safety hood applications.
Features:
* UVTect microprocessor controller
* All polypropylene construction - NO MORE RUST!
* Seamless, smooth construction minimizes air turbulence
* Built-in fluorescent lighting
* All-white surfaces are easy to clean
* Meets ISO 5 and FS209E Class 100 clean bench standards
* 110V or 220V versions
|
|
BIGNEAT Class I cabinets draw air past the operator and exhaust through the top of the cabinet, a negative pressure is maintained within the cabinet ensuring containment integrity.
Built to European EN12469:2000 standard
Key features
Available as ducted or recirculatory filtration models (recirc model shown)
Efficient insulation, sound levels less than 55dB(A)
Internal illumination greater than 750 Lux
State-of-the-art electronic management system with airflow indicators and audible alarms
|
|
BIGNEAT Biological Safety Cabinets meet all the requirements of European EN12469:2000 Standard.
Great features for the comfort of the operator include:
Ergonomic design
Clear well lit view of the working area
Quiet operation
Easy clean surfaces
BIGNEAT products are built using only the best available materials and using the latest manufacturing techniques to give a quality, long lasting finish - equipment that will give years of consistent and reliable service.
|
|
|
Eliminating dust, oil, moisture, carbon monoxide and any other harmful particle, the MED make respirable the most difficult environments. Certified THIS Medical, these treatment units of the compressed air are composed of a drier by adsorption, filters and catalysts. They fontionnent starting from any electrical motor compressor and can feed to 15 people in respirable air in conformity with standard NF INTO 12021.
|
|
BA-2025 and BA-2030
Stationary breathing air purifiers incorporating CO and CO2 removal.
HPBAP Series
High pressure breathing air purifiers incorporating CO and CO2 removal.
Regenerative NBC Filtration for Fixed and Mobile COLPRO Facilities
Modularity and capacity to be integrated into virtually all COLPRO facilities from citadels to complete buildings.
BA-2006
Medium pressure breathing air purifier without CO or CO2 removal.
BA-DME and BAM Series
domnick hunter provide a comprehensive range of breathing and medical air purification systems for use with Respiratory Protection Equipment (RPE) and in medical applications.
|
|
Designed to be connected to standard factory airlines Factair's range of Safe Air Cabinets provides high quality breathable air to BS EN 12021:1999 by filtration from a normal compressed air supply.
Each unit is fitted to a pressure regulator, pressure gauge and automatic condensate drain. The breathing-air outlet pressure is set using an adjusting key and the pressure gauge incorporates the correct operating parameters for both positive pressure and constant flow masks, in accordance with the requirements of BS EN 14594. Mounted in durable, impact resistant polyethylene housings the Safe-Air Cabinets can be used in the most hazardous and hard working environments.
The Safe-Air Cabinets can be supplied in 2 different output sizes either 425 l/min from 2 outlets or 850 l/min from 4. As standard the Safe-Air Cabinets are provided with a coalescing and carbon filter; however, for heavier duty applications a pre-filter is also available. Units are available in either wall mounted or portable free standing configurations. for standard and options.
|
|
Breathing Air Purifiers
(50-300 scfm)
Pneumatic Products BAP desiccant dryer purifiers are designed to provide a continuous supply of clean, safe breathing air from your existing compressed air system. Every purifier is a complete full-capacity purification system that performs effectively with lubricated or non-lubricated compressors.
Meets OSHA and CSA breathing air standards.
Protects workers from ambient and compressed air respiratory hazards.
Increases worker comfort and productivity.
Simple installation-air and electric only.
RS-232 monitoring of system operations and maintenance schedule.
|
|
Hydrocarbon plants
GRASYS hydrocarbon separation plants are produced with the use of the company brand-new proprietary membrane capable of delivering substantial benefits in comparison with other gas separation technologies.
Due to their cost-effectiveness combined with required longevity GRASYS membranes may be efficiently used in industrial applications where operating conditions excludes the adoption of other polymer membrane types. Besides, this membrane gas separation technology has a modular structure allowing expansion or modification of operated systems and prompt response to any changes in feed composition during the entire life cycle of a given source (e.g. increasing CO2 concentration or changing hydrocarbon flow composition in a natural gas field) and all this without unnecessary additional costs. The description below features some of the primary applications of GRASYS gas separation systems
Natural gas sweetening
Today, membranes are used for natural gas sweetening by means of acid gases, CO2 and H2S removal and ensuring its compliance with pipeline requirements as well as for carbon dioxide removal from methane and its subsequent injection in formation in the process of tertiary oil recovery. Frequently, natural gas streams contain aggressive or highly condensable components decreasing membrane capacity. For removal of these components or maintenance/control of their concentration within the membrane capacity critical limits expensive preliminary treatment is required. This restricts the conventional membranes area of application by natural gas processing and increases their functional complexity and operating costs. The new technology makes it possible to develop contamination-resistant and cost-effective membrane systems, highly efficient by gas separation.
|
|
Filter elements DELTA and DELTA ²
Our series of filter elements DELTA will be able to convince you by its results. It fills as of today the environmental requirements of tomorrow. The body of the filter element DELTA is out of sintered polyethylene. The surface of the filter is made up of a layer of PTFE microporous and hydrophobic subject which is firmly anchored in the filter housing.
Notable characteristics of our elements DELTA:
- possible lifespan of the filters up to 15 years
- Maintenance costs reduced thanks to this high lifespan
- Constant Flow thanks to a constant pressure loss
- Rates of filtration thanks to a filtration of surface Excel
- Rejection Rate ≤ with 1,0 mg/m
- Robust Filter thanks to a body of compact filter
- Filter Media: washable, which can be recycled, regenerable
- Universal Assembly on the side of the clean air or the dirty air
- Horizontal and vertical Assembly possible
- Media completely free from fiber, ideal for a recycling of the product
- Particularly adapted for very abrasive dust
- Anti-static Version
- Conformity FDA thanks to the food use of materials
|
|
|
The MCB Series of cartridge dust collectors effectively remove fine airborne dusts while providing workers space for unrestricted movement to perform industrial processes. Available as 3, 6 or 9 modules, the MCB cartridge collector can be used alone or in combination with a containment booth.
|
|
Ducon's Selective Catalytic Reduction (SCR) NOx, N2O, CO and VOC Reduction System features state of the art catalysis technology and controls engineering for easy erection and quick tie-in to new or existing process systems.
Ducon utilizes ceramic honeycomb shapes or plate-type catalysts consisting of titanium dioxide as a base material with active coatings of vanadium pentoxide and tungsten trioxide that have been arranged at different levels. The working temperature of the catalyst ranges between 600 F and 800 F. For NOx systems Ducon provides Ammonia injection systems complete with storage tanks, vaporizers and injection grids. Ducon can provide ammonia as anhydrous or aqueous (19%, non-hazardous) solution. Ducon systems have low ammonia slip.
For systems requiring heat, the burner features a FM approved gas train and Honeywell Burner Management System. The units are designed for heat recovery in the range of 65 - 75%. Ducon SCR systems can achieve over 90 % NOx & N2O, 90% CO and high VOC removal efficiencies.
|
|
|
SCA and SCB cartridge dust collectors capture hazardous contaminants from welding processes. Installed above the plant floor, these ceiling-mount units ensure clean air without taking up valuable floor space. This cartridge collector offers a choice of ambient air collection (SCA) as well as source capture (SCB).
|
|
Camfil Farr CamHosp is the product you need for perfect unidirectional airflow. CamHosp an be installed in two to three hours by two people. The plenum, structure and filters are provided with very detailed instructions. On request Camfil will assemble the unit and / or test it.
Use Screentech and increase lifetime for filter by protection them from example splash. In extremely sensitive departments (major burns, immunodeficient patients, etc) CamHosp includes a format adapted to provide localised protection of a bed.
|
|
Darwin: the innovation friend of the environment!
Thanks to Darwin, the air filter, that mounted on machine tools, cleans the air in work places, Losma has been among the marked companies to the prize the Innovation friend of environment 2002.
The event has been promoted by Legambiente, co-promoted by the Polytechnic of Milan and the Bocconi University, with the contribution of Confindustria and the sponsorship of the Lombardy Region and the Ministry of the Environment and the Protection of the Territory.
This acknowledgment rewards the engagement of the companies for continuous research and development of innovations compatible with the environment.
From the 1974 Losma operates in the field of the air filtering in industrial workplaces, with the maximum attention to the topics of the emergency and of the protection of the environment inside of the job places.
The Darwin air filter, patented, has been marked as personalized system, careful to the reduction of the energetic consumptions for the aspiration and cleaning of the air from oil fogs of machine tools.
|
|
Compensation air handling units are used for re-introduction of similar air volume to the volume extracted by various industrial process. Example : Painting plants, dust extractors, fume extractors ...
The inlet air volume is treated with filtration and/or gas heating. 2 types of heating :
- Direct burner in the air flowr (Efficiency 100%) - MAKE-UP
- Combustion chamber / exchanger burner - EOLIS
The regulation is on board and controls the extractors as well.
Air flow : 20 000 to 100 000 M3/H
Heating power : 300 to 1 500 KW
|
|
JS Humidifiers Special Projects Division works with clients to design and produce bespoke humidification solutions.
For precise control of humidity and temperature, extreme outputs, specialist construction for controlled environments or unusual control, whatever the requirement JS will design and manufacture a solution.
|
|
Available in several design configurations,
Ducon Cyclones, (Duclones) achieve over
99.9% efficiency on particles down to 10 microns. Custom designed high efficiency Duclones are also available for unusual service conditions.
FCC Cyclones For Refineries
High efficiency cyclones for FCC processes of: UOP, EXXON, ABB, KELLOG, STONE & WEBSTER, TEXACO, FOSTER WHEELER AND OTHERS
Collection Efficiency maximized
Leading supplier of FCC catalyst recovery cyclones since 1950's.
Reactor, Regenerator and Tertiary vessel primary & secondary cyclones
Complete Reactor, Regenerator and Tertiary Plenums designed and vessels fabricated
FCC Flue Gas Cleaning Systems for removing Sulfur dioxide and Particulate
Advantages
- 99.9% efficiency for 5 micron size and over particles
- Design selection optimized
- High efficiency at low pressure drops
- Compact assembly
- Multiple units with various layouts available
- Wide variety of construction materials
- Single or multiple layer refractory lining
Applications
-Dehydrated Foods
-Instant Coffee
-Detergent
-Chemicals
-Pharmaceuticals
-Fluid Bed Processes
-Catalytic Cracking of oil
-Calcining
-Coal Drying
-Ore Roasting
-Rotary Dryers
-Fertilizer
-Asphalt
-Lime
-Conveying
-Mineral crushing
-Pulveriz
|
|
CYCLONE IC-SC-UC-RC
Kongskilde can offer a wide program of cyclones designed for the Kongskilde OK pipe systems. The cyclones are designed as suction and outlet cyclones for pneumatic conveying and for separation of dust from air. The range of cyclones can handle volumes up to 2500 m3/h (1500 cfm). Please consult with Kongskilde for detailed specifications.
|
|
|
Cyclones effectively remove large to moderate-size particles from the air stream for recovery or for disposal. Used alone or in conjunction with another dust collector or after-filter, a cyclone separates coarse contaminants from fine, non-visible particles, and exhausts clean air.
|
|
These are used for degassing resins, compound materials, silicone mixes, etc.
They can achieve vacuum levels of 99.5%
Ideal for model makers and prototype builders
|
|
The JETLINE® CH is a pocket filter with automatic compressed air pulse jet cleaning.
OPERATING PRINCIPLE
The dust-laden air passes through
the needlefelt pockets from the
outside to the inside, depositing the
dust on the outer face of the filter
media.
The clean air is then exhausted from
the filter.
Blowing a very short blast of
compressed air into the filter pocket
via the venturi cleans the filter
media.
The sudden change in shape of the
pocket due to its rapid inflation
causes the collected dust to fall off the
filter media into the hopper.
The electronic sequencer controls the
cleaning cycle. The time of the
impulse of compressed air is
regulated to obtain the optimal
cleaning cycle.
|
|
Ducon supplies Semi-Dry Removal (SDR) type Dry Flue Gas Desulfurization (FGD) Systems as well as Dry Injection type systems. The SDR systems are custom designed to absorb gaseous pollutants utilizing a spray dryer and a baghouse filter. Ducon's specially designed air atomizing nozzles provide the liquid reagent slurry into the spray dryer for high efficiency removal of SO2, HCl, Mercury and other toxic components from flue gases. Ducon's SDR system provides very high on-line availability and low maintenance as compared to a rotary atomizer type of system.
Ducon provides Dry Injection Systems using lime, trona, activated carbon and other dry reagents to remove sulfur dioxide, dioxins, mercury, Hydrogen Chloride and fumes. The reagent is added in a recirculating type reactor with steam injection for higher absorption. The particulate is then recovered downstream using a bag house filter. Ducon's Dry Injection Systems are able to achieve over 90% SO2 removal efficiencies.
Ducon Dry Scrubber generates a dry waste product that can be easily disposed of with conventional flyash handling equipment. Ducon provides complete turnkey systems for industrial and utility clients.
|
|
Dust collector with high and low pressure, high performance, high capacity of suction. They are compact, light, easy to carry, and can be installed in narrow space of difficult access. They optimize production, preserve machinery and manufacturing process and protect workers against harmful particles, while providing clean work environment for electronic, mechanic, automobile and pharmaceutical industries.
Characteristics
Maximal filtration rate: 99,97 %.
Compact and light.
24 hours, round-the-clock operation
Power : 150 ~ 1200W.
Elimination of odors.
Application areas
Electronic, Electric, Mechanic, Manufacturer of machine tool, Automobile, Pharmaceutical, Laboratories, Food, Dental Prosthetist, Watchmaker %u2013 Jewelry etc.
|
|
|
There are good reasons for a compact dust collection solution: Clean and therefore healthy workplaces are not only beneficial for employees, but also make a decisive contribution towards preventing annoying interruptions in production. Longer service life for machines and tools help to reduce production costs. The compact filter is a mini vacuum cleaner for air volumes from 500 up to 3.000 m³/h. Requiring very little space, it is ideally suited as an auxiliary device for mounting directly on the production unit. The design principle of this series is based on an innovative modular construction system. Fans, filter surfaces, dust containers and the mode of operation can be provided to comply with your specific requirements.
|
|
|
The filtration units series DCS are destined to the systems of aspiration and discouragement of all those powders derived from the processes of surface treatment that need of a captazione and a transport to high speed. The exclusive right and patented Cycloseparator technology and the application of cartridge filters in woven polyester "long-life" are constant guarantee of highest efficiencies of filtration and performances in the time. Thanks to the part electrical worker of commando and endowed control of PLC a advanced management of the functionalities so as to at best satisfy the requirements of the system is possible, adapting the energetic consumption according to the demanded effective of aspiration from the operating ones. Available Atex version (Version "RX") in compliance with Directive II3D T150°C
|
|
As HERDING continues to develop filter elements and units which do not contain an ignition source, the company has accumulated extensive theoretical and practical experience in the field of fire prevention.
HERDING contributes its expertise to a variety of organizations including the Association of German Engineers (VDI), the German Engineering Federation (VDMA) and the German Insurance Association (GDV). HERDING also shares its expertise in handling flammable and explosive dust with companies that use filter units.
In addition to ATEX-compliant filter units, HERDING also offers a filter system analysis service to review customer compliance with ATEX requirements. HERDING assesses the systems on site, provides customer training and generates an explosion protection document based on German occupational safety regulations (BetrSichV). HERDING performs a risk assessment including zone and ignition hazard analysis and generates an appropriate preventive, design and organizational action plan. Why not contact us? We would be please to advise you.
|
|
The new and compact DELTAFlex design enables the end user and the operating company flexibility with a small foot print, particularly when large air flows are of concern.
The filter elements are mounted vertically and depending on the application, the filter unit will be equipped with DELTA- or DELTA²-filter elements.
The safety concept and the unit design following the ATEX-safety regulations will follow your needs.
|
|
As HERDING continues to develop filter elements and units which do not contain an ignition source, the company has accumulated extensive theoretical and practical experience in the field of fire prevention.
HERDING contributes its expertise to a variety of organizations including the Association of German Engineers (VDI), the German Engineering Federation (VDMA) and the German Insurance Association (GDV). HERDING also shares its expertise in handling flammable and explosive dust with companies that use filter units.
In addition to ATEX-compliant filter units, HERDING also offers a filter system analysis service to review customer compliance with ATEX requirements. HERDING assesses the systems on site, provides customer training and generates an explosion protection document based on German occupational safety regulations (BetrSichV). HERDING performs a risk assessment including zone and ignition hazard analysis and generates an appropriate preventive, design and organizational action plan. Why not contact us? We would be please to advise you.
|
|
|
|
Air treatment and air filtering equipment
