|
|
| Products 91 to 120 of 232 |
High gradient magnetic separators for capturing fine ferrous and paramagnetic particles in liquids and slurries
Main applications include ceramics and minerals processing industries to purify raw materials, such as ceramic bodies, silica and feldspathic sands and to upgrade quality of final product (purer, cleaner and whiter product)
Proven in practice to offer 30% greater separation performance than traditional WHIMS systems.
|
|
AirClean Systems Polypropylene Horizontal Clean Benches
AirClean Systems Horizontal Laminar Flow Clean Benches are constructed from all-white, structural polypropylene. This provides a seamless design and exceptional Class 100 laminar flow air in a horizontal direction. Uniform air exits from the rear of the hood where it is filtered and then flows forward to the face of the hood. Built-in fluorescent lighting is provided to illuminate the work surface. Units are available in standard 52-inch and 102-inch widths while custom widths are available.
Features:
* UVTect™ microprocessor controller
* All polypropylene construction - NO MORE RUST!
* Seamless, smooth construction minimizes air turbulence
* Built-in fluorescent lighting
* All-white surfaces are easy to clean
* Meets ISO 5 and FS209E Class 100 clean bench standards
* 110V or 220V versions |
|
Hydrogen Coolant Purifiers
The HCP is a self-contained system that dries and purifies the hydrogen gas that is used as a coolant in electrical power plant generators. It removes water, oil and other contaminants that cause corrosion and cracking in retaining and zone rings, lead carbonate formation, increased windage losses and other potentially catastrophic consequences.
Legendary Select Series or Century Series control valves feature stainless steel internal parts designed specifically for desiccant dryer service and tested to 500,000 cycles, bubble-tight.
Switching valves and gas-tight blower are vented to prevent formation of dangerous air-hydrogen mixtures.
Welded stainless steel piping minimizes threaded connections, reducing potential leaks.
Complete instrumentation monitors the system for operation outside of specifications.
Potted conduit seals isolate electrical controls from hydrogen.
High temperature heater shutdown prevents excessive operating temperature.
Pre-installed PPC Series pleated particulate filters protect downstream equipment.
|
|
AirMax™ Polypropylene Total Exhaust Fume Hood from AirClean Systems
AirClean® Systems AirMax™ total exhaust polypropylene fume hoods are manufactured from all-white, structural polypropylene. Polypropylene offers excellent chemical resistance. AirMax™ has a seamless design and allows for NO MORE RUST!
Features
* Microprocessor controller - displays real-time airflow
* All Contact Surfaces are constructed of polypropylene - NO MORE RUST!
* Flame-retardant polypropylene interior - Higher temperature working range than fiberglass
* Non-hydroscopic - won’t absorb moisture
* Smoothflow™ air foils for superb airflow performance - Minimizes eddy currents found on other fume hoods
* Large volume spill basin with solid work surface
Optional wet scrubber system is suitable for water soluble gases. Each scrubber is constructed from thermoplastics that are resistant to the gases being scrubbed. |
|
*THE USER IS PERFECTLY PROTECTED
The air released by the filter contains 100 times less pollutants than the acceptable limit values defined by the official safety authorities (this is to prevent the accumulation of the release of authorized toxics).
VERY LOW SOUND LEVEL
Only 49 dba !!
*TOTAL SAFETY OF THE OPERATOR
Hour counter associated to an alarm designed to remind the user to check every 60 working hrs. the saturation state of the filter.
VERY COMPACT SIZE AND IMPORTANT INTERNAL HEIGHT :
only 610 mm - 24 1/5 length
747 mm - 29 4/9 height.
FULLY TRANSPARENT DOOR & SIDE PANELS OFFERING A GOOD VISION
allowing for large movements within the enclosure, without opening the front door.
FULLY REMOVABLE SPILL TRAY
can be removed when needed, without dismantling the hood. |
|
AirClean Systems Vertical Laminar Flow Workstations
Optimal with applications that require a clean work area but do not involve hazardous materials. The AirClean Systems AC600 Series vertical laminar flow workstations are compact and light weight allowing for multiple “clean zones” within a laboratory.
Features:
* UVTect™ microprocessor controller
* Class 100 (ISO 5) vertical laminar flow
* 360-degree visibility
* Integral polypropylene base for easy cleaning
* All thermoplastic construction
* Built-in fluorescent light
* HEPA filter monitor automatically indicates when filter change is required
* Available in 24”, 32” and 48” widths
* Available in 110 V or 220 V versions
* Includes HEPA filter, intial prefilter and one ACASLIP slip hatch (in right rear)
Model Options:
AC632LF: 32" Wide
AC632TLF: 32" Wide, Tall Version
AC648LF: 48" Wide
AC648TLF: 48" Wide, Tall Version |
|
BIGNEAT Laminar flow cabinets are designed to protect product or operating staff by maintaining a particle-free ultra clean zone. They can be used whenever a Class II cabinet is deemed unnecessary.
Laminar Flow Cabinets are available in two versions, providing horizontal air for operator or product protection.
All BIGNEAT Laminar Flow Cabinets are provided with a well lit diffused hidden lighting as standard and efficient sound insulation, which ensures the operator can use the cabinet for long periods without discomfort.
Performance
Bigneat cabinets complies to ISO 14644 - 1:1999 Class 5
Air is delivered to the worksurface at better than Class 100 quality
Highlighted Features:
. Comfortable to use, easy controls with well lit working area
. Excellent working access
. Easy clean surfaces
. Fluorescent tubes are concealed within the fan housing
. Working sound levels less than 55dB(A)
. LED airflow indicators and audible alarms for incorrect airflow condition |
|
MinAir
Compact mini-humidifier at the highest level: ideal to complete central dwelling ventilation eg. in low energy houses and in any other application, where a small quantity of steam only is required, eg. in laboratories, etc.
Advantages:
Steam capacity from 0.4 to 2 kg/h
User friendly
LED-display to show set-point and actual relative humidity
Integrated humidity controller
|
|
Magnetic Candle Filters are used to filter out ferritic particles from cooling lubricants.
|
|
TYPICAL APPLICATIONS
EFS
Standard size housings available with 30 (590), 60 (250), 100 (149), and 150 (99) mesh (micron) reusable, stainless steel filter cartridges. Units measure 11.25" long and feature a 1" NPT intake and dual 1" NPT discharge ports (3/4" reducers provided).
FEATURES
Graymills Superflo filters are designed to overcome the typical pressure drop and reduced flow due to clogging that occurs with ordinary filters. A permanent magnet suspended over the intake port traps ferrous particles which find their way into the fluid, and diffuses the flow outward into the filter screen flutes. Filtered material is trapped on the inside of the removable/reusable stainless steel filter cartridge. To clean, just remove the cartridge. All the contaminants come out with it. Self draining. No wasted fluid or messy leftovers to deal with. Stainless steel filter cartridges are available in four different mesh screens. |
|
As pre-cleaners or main cleaners for subordinate applications and magnetisable chips, magnetic filters offer a good and reasonably priced filtration method.
Turbo Separator AG produces magnetic filters with flow rates of 100 - 400l/min.
Depending on the application area, these magnetic filters can also be built up in cascades.
Magnetic filters from Turbo-Separator can be installed as integrated components of a system or built on as accessory products.
Special requirements call for special solutions - we shall implement your wishes, with unconventional solutions if need be! (SE magnets) |
|
Hydrocarbon plants
GRASYS hydrocarbon separation plants are produced with the use of the company brand-new proprietary membrane capable of delivering substantial benefits in comparison with other gas separation technologies.
Due to their cost-effectiveness combined with required longevity GRASYS membranes may be efficiently used in industrial applications where operating conditions excludes the adoption of other polymer membrane types. Besides, this membrane gas separation technology has a modular structure allowing expansion or modification of operated systems and prompt response to any changes in feed composition during the entire life cycle of a given source (e.g. increasing CO2 concentration or changing hydrocarbon flow composition in a natural gas field) — and all this without unnecessary additional costs. The description below features some of the primary applications of GRASYS gas separation systems.
Natural gas treatment
Hydrocarbon adjustment of natural gas dew point
Natural gas sweetening
|
|
Advanced air handling unit that creates precise micro-climates for sensitive pharmaceutical and medical device applications.
Temperatures from 15°C to 45°C and humidities from 30% to 98% relative humidity can be pre-set on the Micro-Environment Control System to provide consistent temperature and humidity controlled air for spot process applications.
Accuracy is within ±1%rh and ±0.1°C – a level which until now has been unachievable on a consistent basis. Air volumes are adjustable from 110 litres per second to 200 litres per second. |
|
PME Series, Mist Eliminators
(125-3,000 scfm)
Air auditors always consider PME Series Mist Eliminators due to the 0.5 psig wetted pressure drop of the filter element. The unique housing and filter design is becoming the solution of choice for compressed air users who have decided to reduce the air compressor horsepower required to maintain stable air pressures in their plant.
Standard Differential Pressure Gauge mounted and piped
Heavy duty ASME stamped pressure vessel
Long life mist eliminator element
Floor stand
Dedicated vent port for demand type drains
|
|
The units are constructed of corrosive resistant materials including PVC and CPVC and can be designed as horizontal or vertical configuration.
Chrome mist eliminators are commonly used for abatement devices in chrome plating shops containing hard, decorative, and anodizing processes. Chromic acid mist is removed from exhaust to levels below the EPA Mact standard and California requirements through KCH's Chrome Mist Eliminator.
KCH's extensive involvement with EPA regulation and the chrome plating industry has allowed KCH to build the most effective and efficient chrome mist eliminator available to chrome plating shops. |
|
INDUSTRIAL DEHUMIDIFIER (from 53 to 80 l/24h)
EF-55 / EF-80
Dehumidifiers for industrial application, dehumidification capacity: from 53 to 80 litres/24 hours.
Their function: extract ambient humidity to create an adequate and comfortable and avoid premature ageing of materials.
Ideal equipment for drying acceleration in the construction sector, food industry, big premises, offices, greenhouses, and industrial applications in general. |
|
Windows and doors can also only be insulated to a certain degree; moisture and wetness even penetrate through thick cement walls. Dangerous moisture that leads more quickly to mould and rust than expected and damage deposited materials, electrical installations, perishables, files, and much more.
During the manufacturing of cement, mortar, plaster, and so on, large volumes of water are required for the hardening process. Even processed construction elements like bricks, gas cement, and so on may contain water to an extent that should not be underestimated. |
|
| An efficient unit with a high volumetric air flow such as smallest noise emission for working places in calm environment. Available in MINI- and MAXI-execution, whereby the AIRFILTER MAXI has double suction power and double filtering surface opposite the AIRFILTER MINI. Thus the AIRFILTER MAXI is particularly suitable for the multi-shift operation. The volume of both units corresponds in approximately to that of a personnel computer. |
|
Hazardous materials in the form of dust, floating particles, gases and fumes are often unavoidable in production processes. According to national regulations of air purification at the workplace they have to be removed from the air. Extraction devices of the ULT AG are particularly designed for these tasks and thus, harm to employees, products and machines is safely prevented.
The recirculation ventilation helps to reduce energy costs. |
|
These dust collectors are designed to combine efficiency with maximal miniaturization. They provide high level filtration that is adapted for precision works. The small size of these dust collectors makes them easy to integrate into all type of environment. They are ideal for preservation of the products and performance of manufacturing tools.
Characteristics
Maximal filtration rate: 99,97 %.
24 hours, round-the-clock operation
Elimination of dry and clogging particles.
Compact and light
Application areas
Electronic, Electric, Mechanic, Manufacturer of machine tool, Automobile, Pharmaceutical, Laboratories, Aerospace etc. |
|
| The V Series dust collector eliminates dust, smoke and powders from a variety of manufacturing operations. Available in three configurations, these cartridge collectors serve as a portable source capture system (VP), a downdraft bench (VB) or fixed unit ducted directly to a machine (VF). |
|
All models in the air filter series can be coupled to special units that provide real and proper superfiltration. Their use permits many permutations and gives performance levels of up to 99.97% efficiency. These special units can be added at any time, even after the installation of the air filter. Guard: pre-filter for oil mist with swarf. Synthesis: electrostatic after-filter for smokes. Clipper: cartdrige after-filter for micro-mist. Microfilter: activated carbons after-filter for bad/hazardous odours.
|
|
MISTKOP's proven design couples simplicity with efficiency. No spinning filter to waste horse-power or cause vibrations due to unbalanced filters. Mist and contaminants are captured at the source rather than after they are dispersed as with unducted or electronic units. Easily replaced, low cost filters. Collected fluid drains to your process or container. Usually hung near the source, but all models are available "inverted" such as VC-51 for direct or floor mounting. Secondary filters can be added for smoke.
Easy to install
Increase production efficiency
Low initial cost
Reclaim valuable lubricants
No rotating filters to get out of balance
Non-electronic
MISTKOP with Exhaust Shell vents filtered fumes, gases, or heat to the outside. Available for all models, standard or inverted. Can also be supplied with HEPA filters for efficiency up to 99.97% at 0.3 micron. |
|
MistBusters®: Efficient, Compact Air Cleaners For Metalworking Applications
The MistBuster series of air cleaners has significant advantages over competitive mist collectors, including:
High Efficiency. MistBusters remove the mist & smoke generated from water soluble, synthetic and petroleum based metalworking fluids that other oil mist eliminators miss. (Centrifugal units do not remove any smoke!)
Economical operation: No throwaway air filters that reduce airflow as they clog up (most models). Low energy consumption due to superior multi stage air cleaning technology that has low resistance to airflow.
Variable speed controller allows for precise control of the airflow. Why draw excessive mist laden air out of the machine tool enclosure? The MistBuster is the best machine mount mist collector currently available in the market place that allows you to control the negative pressure within the machine tool enclosure. This feature saves energy, reduces maintenance, lowers sound levels and increases efficiency.
Premium Blower - The MistBuster series of compact air cleaners features a very high quality dynamically balanced motorized impeller. This impeller is more compact and energy efficient than conventional direct drive motors & blowers that are used in other systems and is dynamically balanced for smooth operation. This means no vibration is translated to your machine tool improving production quality and consistency.
MistBuster 500 can ship UPS, which significantly reduces shipping charges. |
|
| MistBuster units are efficent, multi-stage mist and smoke collectors. The quiet variable-speed impeller draws mist and smoke through a first stage 4" mist impinger. Then the electrically charged (ESP) collection cell traps the remaining sub-micron mist droplets. Collected liquid is drained back to the coolant tank. Clean, oil-free air is returned to the shop. |
|
The WS series represents a quality solution for the collection of coolant and oil mist. With 5 sizes, ranging from 250 to 2000 m3/h, it is characterized by a sophisticated design, compact
dimensions and standard accessories.
Specifically developed for the elimination of mist, vapour, smoke and odours typical of wet machining operations these mechanical filters can also be employed in mixed application (wet/dry) and for EDM machines |
|
| The Smog-Hog SG Series mist collector captures high-volume coolant mist and oil smoke from industrial processes including drilling, grinding, screw machining and others. Depending on your requirements, systems can be ducted, unducted or free hanging inside any facility. |
|
|
|
Air treatment and air filtering equipment
