|
|
High efficient activated charcoal adsorption professional purifier series AKM / AKN
Oil vapour adsorption from compressed air and gases.
Oil aerosols down to a particle size of 0,01 micron can be removed by a ZANDER X grade Microfilter. Modern industry and process plants need compressed air free of oil vapour, which can only be removed effectively by a ZANDER oil vapour adsorber. Design and Operation:The ZANDER AKN activated carbon adsorber is filled with a special grade of activated carbon*1 for the removal of oil vapour from the top to bottom of the vessel. Thanks to an optimum contact time, velocity, bed depth and quality of activated carbon, the remaining oil content is reduced to 0,003 mg/m3. The quality of the air can be monitored by the oil indicator, which is fitted as standard. Experience has shown that a carbon life of 10,000 hours can be achieved, when a ZANDER X grade Microfilter is fitted up-stream. The exact life of the carbon depends on efficiency of the compressor specification, the type of oil used and the relative humidity of the compressed air.
Capacity from 8 m³/h up to 6100 m³/h, referred to 1 bar and 20° C. Residual oil content: up to 0.003 mg/3. Paint compatible units available!!!
www.zander.de |
|
| Industrial air professional cleaners are suitable for extracting splicer fumes in situations where it is impossible to use an extraction arm at source. They are suitable for treating regular and oily welding fumes originating from oil treated steel. The units are available in two capacities. The choice depends on the volume of air that must be treated per hour. |
|
Trade name: ECO III
Filtration of the air of admission - News approaches
Advantages:
- Not need for supports to measure
- Important Profit of time and money
- Output raised for small overall dimensions
it system of air filtering can be close to the turbo-compressors
- Profit of output
- By its reduced dimensions, releases from space in the driving compartment.
Applications:
- Road vehicles including the buses
- Specialized Applications, practically including all the types of vehicles and installations. |
|
Climaciat compact Air
Air handling device adapted particularly well to airconditioning decentralized by zone, while having an important static pressure, while requiring a low height available. It has a broad panoply of boxes and accessories allowing a complete offer. It is available in horizontal or vertical assembly for the interior installations.
The range is made up of 3 sizes of 1000 to 6000 400 mm thickness m3/h.
Pressure available from 100 to 1000 Pa with a high output and a minimum sound level
The widths of the 3 sizes Compact Air 25,40,60 are: 750 mm/1310 mm/1880 Misters.
Performances optimized thanks to the regulation
- All usual functions, such as register, professional filter opacimetric, heater water or electric, refrigeration with frozen water or direct relaxation, ventilation, mixture, plenum of diffusion, silencer, recuperators,
- Installation with the ceiling or the ground for the horizontal power stations, fixing with the wall for the vertical power stations,
- Doors on hinges with off-set axis,
- Complementary Great choices of equipment. |
|
Wide range of air flows
Dual-wall construction
Air handling unit with filtration, heating, cooling, humidification, dehumidification, ventilation, attenuator, etc.
Self-contained thermodynamic pool dehumidification with control panel and electrical panel
Models:
Climaciat M.A.S.T.A.I.R (50,000 to 130,000 m3h)
Climaciat AIRTOP (1,000 to 17,000 m3h)
Climaciat AIRTECH (1,000 to 60,000 m3h)
Climaciat AIRCLEAN (1,000 to 60,000 m3h)
Air Access (1,400 to 25,000 m3h)
BCP Junior and Aquair (pool dehumidification, 4 to 66 kg/h, 1,200 to 16,000 m3/h)
|
|
Climaciat Airclean sante
Hygiene-grade air handling device designed for use in dust-controlled areas, healthcare environments and, more specifically, operating theatres (meets EN 13053).
Available in 11 models with air flow rates of 1,000 to 60,000 m³/h |
|
| The Deltafrimair® range has been designed principally to deal with the treatment of air to solve air-processing problems and to meet the high demands of industry. The standard range encompasses varying airflow’sfrom 1000m3/hr to more than 50,000m3/hr, and offers a multitude of possibilities concerning the mixing plenum, the filtration level, batterybank (heating and cooling exchanger), humidification systems, professional fan |
|
Lagon range composed of 11 models, covering a flow scale from 1 000 to 72 000 m3/h.
- Various configuration available to meet air conditioning requirements.
- Different orientations for suction and blowing sides.
- Very wide scope of modular arrangement available.
New design to facilitate servicing and maintenance.
- Access to components through large hinged or sliding doors.
- Maintenance panels open by ¼ turn lochs.
- Industrial filters to international sizes.
- Smooth internal sections to facilitate cleaning.
New design additional advantages.
- White RAL 9010 pre-lacquered sheet for external panel.
- Extruded aluminium structure with reinforced corners and integrated frame.
- External panels with a minimum visible screws.
Quality design.
- Double panels, 50 mm thickness.
- Insulation professional seals between 1st and 2nd wall.
- Compressed seal between panel and structure.
- Internal elements of recognised brand well to obtain a high quality product. |
|
| ACUair® hygienic air-handling units incorporate state-of-the-art technology to provide refrigeration and meet filtration, pressurization, condensation control, and sanitization standards required by the food processing industry. Designed for rooftop installation, the units are custom engineered to produce the psychrometric conditions you specify. ACUair® products are the answer when clean conditioned air is needed for today`s hygienic food processing requirements. We offer a wide range of air distribution accessories including supply air diffusers, return air boxes or grills, and exhaust ventilators. |
|
| Hitachi offers both single & double skinned AHU that are modular in design and available in both horizontal and vertical configurations with a variety of discharge arrangements. These units may be arranged to meet almost any space or duct requirements and the standard capacity ranges from 27 - 63 Nominal tons. For special applications, we are able to custom-make the units according to your specific needs. |
|
Air treatment unit double skin 25 mm. Mainly used for ceiling mounting with or without plate recuperator, this unit can be also settled externally on roof.
Air flow 500 à 6 000 m3/h
Cooling power 3.5 to 25 KW
Heating power 8 to 60 KW
Electrical heating power 6 to 32 KW
Pressure up to 500 Pa
Main applications : climatization, filtration, air introduction for extractor compensation, deshumidification. |
|
Both the RC 3000 ( for direct humidification in the room ) and the DC 3000 ( for professional duct humidification ) are attractive steam industrial humidifiers for small rooms that need exactly the right climatic conditions
The humidifiers are microprocessor-controlled, fully automatic and have a stainless steel professional cabinet. There are nominal outputs of 2 and 3 kg/h steam available. The control mode can be either on/off or continuous.
Advantages of the RC 3000 series at a glance:
Built-in silent axial ventilator
Remote indication relay (collective message)
Housing of stainless steel
Options:
Proportional control adapter |
|
The Defensor PH26 employs the evaporator principle. This specifically involves dry air coming into contact with a professional mat saturated with water, absorbing this water and then being emitted into the room air in a practically germ-free condition. Air is thus humidified both inexpensively and with a minimum energy requirement.
A further potential for active air improvement is to be found in air cleaning. The Defensor PH26 can be converted simply and is, in effect, a combination of both industrial humidifier and air cleaner in one.
|
|
| BAUER KOMPRESSOREN is recognised as an international leader in the field of high pressure compressors manufacturer and industrial purification systems. Properly processed air is an essential prerequisite for many processes. Purification aims to reduce the undesirable gas components to a required minimum. Our purification systems are tailored precisely to your needs. |
|
| Bry-Air, an ISO 9001 and 14001 company, a pioneer in the field of dehumidification equipment offers 'state-of-the-art' Air and Gas Industrial purification systems for various application areas. The ultimate solution to corrosion lies in gaseous filtration which involves passing the contaminant laden air stream through a bed of dry media placed in a properly designed housing. The principle of air purification is simple : the contaminated air passes through pre-filters which retain dust and particles, and then the required chemical media stages (combination of activated carbon and activated industrial alumina impregnated with proprietary chemicals) which chemically destroy any remaining gaseous contaminants. It is a simple, yet cost effective solution to a problem that can be very costly from a production standpoint. |
|
Micro Air's line of commercial air professional cleaners is designed to control airborne particulate and fumes that are present in commercial facilities. These include cigarette and cigar smoke, paper dust, toner dust, professional printing odors and solvents, carpet odors or other indoor air pollutants. With options like wall mount, flush ceiling mount, and below or above ceiling we will solve your specific air quality issues.
These Media units utilize a series of industrial filters to collect the particulate. These include pre-filters, media bag filters, Hepa filters, and/or charcoal modules. Micro Air equipment can be configured with various combinations of media to most effectively capture the specific particulate or fume. |
|
Daikin’s 4th generation professional air purifier offers improvements at all levels.
Allergy sufferers and others who appreciate the value of clean air can take heart. With the MC707 Air Professional purifier, Daikin has brought its formidable innovative tradition – honed in the residential and commercial climate control sector – to bear on this growing market segment. The new technology means professional cleaner air and increased performance with the same whisper quiet operation in an aesthetically pleasing design. |
|
The industrial models offer three types of filtration. Media units utilize a series of professional filters to collect the particulate. These include pre-filters, media bag filters, Hepa filters, and charcoal modules. The unit can be configured with any combination of media to most effectively capture the specific particulate or fume.
Cartridge units utilize self- cleaning, high efficient, cartridge filters. These reduce filter replacement cost as the filter elements are continually cleaned by pneumatics as the unit is operational. All Micro Air® cartridge air cleaners utilize the revolutionary Roto-PulseT professional cleaning system. This cleaning method has proven far more effective at cleaning the filter that the traditional reverse-jet systems.
Industrial electrostatic models use a series of collecting cells that are electronically charged. As the particulate passes through the ionizer section of the unit, the individual dirt particles receive an opposite charge that causes them to collect on the cell plates.
Micro Air® industrial air cleaners are available in models from 100 to 6000 CFM with a broad range of filtration options. This total versatility allows us to recommend just the right model for your particulate needs. |
|
| Placed in the manufacturers of autoclave, the Anabac deodorant provides a discreet and perfumed touch to the lab. Choose between Classic, Poma or Citrus fragance. |
|
Emission control catalysts eliminate dangerous engine pollutants from a wide range of fuels, including gasoline, diesel, natural gas, and alternate fuels.
Umicore catalysts transform pollutants into harmless gases within a catalytic professional converter before releasing them into the environment. These converters generally consist of a stainless steel housing containing the catalytically active material applied onto a ceramic or metallic monolith as support. |
|
| The BDC Series of supplier of dust collectors are ideal for industrial processes such as bin venting and raw material handling. Compact in size, this baghouse-style system can be installed inside or outside; while minimizing the occupation of valuable floor space and offers easy access for professional filter maintenance. |
|
AirClean Systems Class I Biological Safety Hood
Constructed from all white seamless polypropylene, AirClean® Systems horizontal laminar air clean benches are the ideal solution for Class I biological safety hood applications.
Features:
* UVTect™ microprocessor controller
* All polypropylene construction - NO MORE RUST!
* Seamless, smooth construction minimizes air turbulence
* Built-in fluorescent lighting
* All-white surfaces are easy to clean
* Meets ISO 5 and FS209E Class 100 clean bench standards
* 110V or 220V versions |
|
BIGNEAT Biological Safety Professional cabinets meet all the requirements of European EN12469:2000 Standard.
Great features for the comfort of the operator include:
Ergonomic design
Clear well lit view of the working area
Quiet operation
Easy clean surfaces
BIGNEAT products are built using only the best available materials and using the latest manufacturing techniques to give a quality, long lasting finish - equipment that will give years of consistent and reliable service |
|
BIGNEAT Class I professional cabinets draw air past the operator and exhaust through the top of the cabinet, a negative pressure is maintained within the cabinet ensuring containment integrity.
Built to European EN12469:2000 standard
Key features
Available as ducted or recirculatory filtration models (recirc model shown)
Efficient insulation, sound levels less than 55dB(A)
Internal illumination greater than 750 Lux
State-of-the-art electronic management system with airflow indicators and audible alarms |
|
|
|
Air treatment and air filtering equipment
