|
|
MINIDIS - Portable Mini-distillation professional analyzer
This true atmospheric distillation analyzer is extremely compact, portable and light weight and operates as a fully stand-alone unit and performs exclusively to the latest standard for small scale distillation of petroleum products - ASTM D7344.
MINIDIS uses full automation from sample introduction to heating regulation, vapor temperature registration, volume measurement in the receiver compartment and calculation of the distillation curve from the raw data obtained during the test. This way it achieves the highest levels of accuracy, repeatability and reproducibility.
Want to get D86 test reports? A distillation run and detailed D86 test report takes about 15 minutes (gasoline) depending on the sample type. The automatic operation involves simply inserting the filling tube into the sample container and pressing "RUN". No sample preparation like cooling is necessary, neither special programming of the test conditions or prior distillation knowledge is required.
With the automatic sample introduction, the pre-programmed rinsing cycle and the use of cheap and disposable sample cups, any manual cleaning of the instrument is avoided.
Due to the true portability and rugged housing, the MINIDIS is also the perfect solution for applications, where standard lab instruments cannot be applied, such as outdoor tests or in mobile labs. |
|
ADU 4
For the examination of motor gasolines, aviation gasolines, aviation turbine fuels, special boiling point spirits, naphthas, white spirits, kerosenes, gas oils, distillate fuel oils, solvents and similar petroleum products.
The modular system allows up-grades on demand with:
- Automatic Dry-Point Detection
- Fire-Extinguisher
- Tempering Unit
- PC or Professional printer |
|
Particularly adapted for wines, liqueurs, beers, perfumes, alcoholic solution in general and spirits. It's a quick operating automatic instrument taking advantage of a fully new heating-system and with an automatic stop of water cooling flow at the end of the distillation.
The collection of the distillate is blocked automatically on reaching the amount established by means of the precision electronic balance. |
|
Laboratory centrifuge for continuous separation of two liquids, clarifying of liquids from solids, emulsifying of several liquids, fraction of plasma protein, concentration and extraction of viruses and bacteria as well as further fields of application.
Function
CEPA wringers are characterized by their ability to process many times the volume of their tubular bowl. Fluid mixtures are fed into the bottom of the rapidly rotating separation chamber. Solids are retained, while liquid components are expelled from the top of the chamber through a collection tray. For liquid-liquid separations, two collection trays are used. The retained solids cake is dry and densely packed by the high G-forces of the CEPA centrifuge.
Benefits
Quick separation
Continual capacity
Easy installation and handling
The results can be correlated to production centrifuges of type Z 41 to Z 101
Favourable maintenance
Small space of installation saves valuable room
Deliverable in closed execution
Technical data
Type/Model: LE / GLE
Throughput l/h*: 30
rpm: 15.000 to 40.000
G-force max.: 40.000
geometric content: 0,25 l
* The max. throughput is related to water. |
|
CEPA wringers are characterized by their ability to process many times the volume of their tubular bowl. Fluid mixtures are fed into the bottom of the rapidly rotating separation chamber. Solids are retained, while liquid components are expelled from the top of the chamber through a collection tray. For liquid-liquid separations, two collection trays are used. The retained solids cake is dry and densely packed by the high G-forces of the CEPA centrifuge. Plastic bowl liners are available for models LE, Z41 and Z61 to facilitate cell paste removal.
The optimum size of a centrifuge for a given application depends on the properties of the process liquid. Typical process volumes specified for each centrifuge are approximate. Contact NBS for a no-obligation consultation regarding your specific application.
TYPICAL APPLICATIONS
- Harvesting biomass
- Clarifying process liquids
- Separating liquid products
- Fractionation of human blood
- Animal blood processing
- Bioremediation
- Processing of granular, crystalline and fibrous suspensions
- Separation of filterable and non-filterable sludges
FEATURES AND BENEFITS
- Rapid separations.
- Consistent performance.
- Range of models facilitate scale-up.
- Simple to set up, easy to use and rapidly cleaned with minimal downtime.
- No fragile membranes to install.
- No replacement membranes, or costly disposables
- Small footprint saves valuable space
- Enclosed models available to help control aerosols and ambient gas and attain quieter operations
- For mixtures with extremely high solids concentrations, drum centrifuges can be supplied
- Powerful 3-phase electricity motors (in models Z41 - Z101) provide rapid acceleration, and quieter operation
- Permanently lubricated oversized head bearings specifications maintain long service life |
|
Gentle separation/perfusion system providing separation forces up to 320 g. Two systems are available - CENTRITECH® LAB-II and CENTRITECH® CELL.
Benefits
-Gentle cell handling coupled with removal of dead cells, offering higher viability and productivity
-Closed system with pre-sterilized disposable inserts
-Eliminated need for CIP/SIP
-Automated continuous separation
-Ergonomic design suited to modern laboratory environments
-Full scalability for perfusion bioreactors (5-3000 liter) or cell harvest (5-600 liter) |
|
| ... products without technical information |
| |
|
|
Filtration and separation systems for laboratory
