|
|
The oil separator effectively removes oil from the discharge gas in the strainer elements and returns the oil through a high precision float valve to the crankcase or oil control system. The efficiency of oil recovery is dependent on the reduction of gas velocity in the separator itself. Providing the oil separator is correctly applied, this will be about 97 % to 99 %.
The use of ESK oil separators protects the compressor from defects cause by lack from lubrication and improves the heat transfer in the evaporator.
Oil separators should be installed whenever the following applications are considered:
• Evap. temp. below <-10 °C
• Blast freezers
• Capacity control
• Two stage plants
• Parallel systems
• Cascade plant
• Flooded systems
• Booster |
|
The Parker oil separator removes oil from system refrigerant by means of a highly efficient coalescing filter. The filter is 98.5% efficient, filtering oil and particles down to 1/10 of a micron while leaving a trace amount of oil necessary for adequate system lubrication. The separator is ideal for recovery and reclaim operations.
|
|
Customers from municipalities to beverage producers, from semiconductor manufacturers to general manufacturers, use industry-leading ozone systems from GE Water & Process Technologies to disinfect and oxidize contaminants in water for a range of applications.
With GE, you get ozone generation equipment that provides superior system design, reliable disinfection and oxidation qualities without having to handle, store or dispose of toxic chemicals. Ozone is far more effective than chlorine for killing bacteria and algae and inactivating viruses and protozoa, such as Cryptosporidium and Giardia. |
|
Whether your main interest is throughput, ease of use, or flexibility of scale and separation methods, there is a CombiFlash system to fit your workload and automation needs. Rely on CombiFlash from Teledyne Isco for superior performance in organic purification.
Check out the new CombiFlash Rf to discover Isco's latest advances in automated chromatography. CombiFlash Rf combines more fraction capacity, intelligence, ease of use, and security/safety features with the smallest footprint of any automated Flash system. |
|
Filtration of:
Emulsions and synthetic dissolutions.
Most common applications:
Any work with cutting tools in general, grinding, cold and warm rolling, washing and others, where a medium-high filtration quality is required.
Nominal filtration quality:
From 20 to 100 µm, depending on the used type of filter band
Flow rates:
100 to 30.000 l/min and more
|
|
Notes:
1. Element diameter is 63.5 mm with cover.
2. Pressure drop calculations based on 20 micron elements.
3. Element length is for mesh pack and does not include end fitting.
4. Polymer viscosity is 250 Pas (2500 Poise).
5. Design conditions are 241.5 Bar (3500 psi) and 343.5C (650F).
6. Vessel material is 304SS and system is designed per ASME Code.
7. System configuration is MPST's patented close-coupled design.
8. System includes manual vent valves and hydraulically automated diverter valves with control panel.
9. System prices are Ex Works Maag Factory.
Options Available:
A. Actuated Vent Valves
B. Drain Valves (manual and actuated)
C. Plunger and spool valves available upon request |
|
Filtration of:
Cutting oil, synthetic dissolutions, mircro-emulsions, rolling oil, dielectric oil, hydraulic oil, kerosene, White Spirit and other petrochemical derivates.
Most common applications:
Profile grinding, slot grinding, gear grinding, honing, deep hole boring, cold rolling, spark erosion, washing and others.
Nominal filtration quality:
5 µm (ISO code 4406 19/16)
Flow rates:
30 to 30.000 l/min and more
|
|
Rösler Process Water Recycling Systems can be connected to virtually any vibratory finishing machine. This increases the savings potential of vibratory finishing. Most vibratory finishing processes such as de-burring, precision grinding, rough grinding, radiussing or polishing are wet processes. Water and cleaning agents (compounds) are the carriers for resultant removal of media and metal fines.
The resultant process water is completely recycled via a closed-loop system . Water and compound savings contribute to significant cost reductions . The system technology is based on special centrifugal technology with an acceleration factor of up to 2000 g, coupled with environmentally-friendly chemistry developed in-house.
Rösler Process-Water Circulation Systems can be adapted to any vibratory finishing application. Semi- and fully-automatic centrifugal systems are available.
Rosler centrifuges are the most popular waste water treatment systems in the world. |
|
- Potabilisation plants
- Ion exchange resin systems
- Filtration plants
- Thermophysical deaerators
Dedicated solutions have been developed by Artes Ingegneria (BONO Artes) employing the following technologies:
- Thermophysical Deaeration
- Atmospheric Deaeration
- Media Filtration
- Walnut Shell Deep-Bed Filters
- Gravity Filtration
- Granualr Activated Carbon Absorption
- Electrodeionisation
- Reverse Osmosis
- Ultrafiltration
- Softening
- Double-Step Demineralisation
- Mixed Bed Polishing |
|
Opposite osmosis
Opposite osmosis is a technology of treatment of water which makes it possible to produce in a continuous and reliable way of great quantities of pure water. Opposite osmosis is a physical process which does not require chemicals. An opposite installation of osmosis removes almost all rock salt, heavy metals, bacteria, viruses and pyrogenic.
Applications:
- Agro-alimentary
- Printing works
- Because wash
-... |
|
| GE Water & Process Technologies uses spiral-wound membranes - tightly packed filter material sandwiched between mesh spacers and wrapped in a small-diameter tube - to desalt and demineralize process water. The membrane's operating conditions are fine-tuned to balance the flux, or the amount of water which passes through the membrane, with the specific rejection rates of contaminants to achieve up to 99.8% salt rejection at low pressures and high flux rates. |
|
Reverse osmosis (RO) is used to reduce dissolved solids from feed waters with salinities up to 45,000 ppm TDS (total dissolved solids). Municipalities and industrial facilities are able to use RO permeate as a consistently pure drinking water supply and to transform drinking water to high purity water for industrial use at microelectronics, food and beverage, power, and pharmaceutical facilities. The technology is also very effective at removing bacteria, pyrogens, and organic contaminants.
Reverse osmosis separation technology is used to remove dissolved impurities from water through the use of a semi-permeable membrane. RO involves the reversal of flow through a membrane from a high salinity, or concentrated, solution to the high purity, or "permeate", stream on the opposite side of the membrane. Pressure is used as the driving force for the separation. The applied pressure (P) must be in excess of the osmotic pressure of the dissolved contaminants to allow flow across the membrane. |
|
The access to water sources is an important issue where there is poor availability of well and surface water. This is particularly true in desert areas or wherever the possibility of desalinating sea water could be an advantage because of the difficulties of drilling deep wells or due to the extremely poor quality of the surface water.
The technologies employed by BONO Artes in the desalination of sea water are based on membrane processes.
In particular the "heart" of the process scheme is a Reverse Osmosis unit where saline water is pumped in cross flow on the elements with enough pressure to overcome the high osmotic pressure and enable a satisfactory recovery factor.
Energy saving solutions are implemented with high-rejection energy saving permeators and with the use of "energy recovery" device enabling the energy of the high pressure concentrate to be transferred to the incoming feed water thus reducing the required power per unit of desalinated water. |
|
Customers in water-scarce regions find that the Seawater Reverse Osmosis (SWRO) Series from GE Water & Process Technologies solves their need for desalination while optimizing operating costs. The SWRO Series covers a range of customer applications, including:
Boiler feed water make-up
Irrigation water
Plant process make-up water
Small community potable water demand |
|
Filtration of:
Emulsions and synthetic dissolutions.
Most common applications:
Any work with cutting tools in general, grinding, washing etc., where a medium filtration quality is required.
Nominal filtration quality:
From 30 to 100 µm, depending on the used type of filter band
Flow rates:
700 ... 2.000 l/min and more
|
|
Filtration of:
Emulsions, synthetic dissolutions and cutting oil.
Most common applications:
Any work with cutting tools in general, grinding, etc., wherever a medium cleaning efficiency is necessary.
Nominal filtration quality:
From 30 to 100 µm, depending on the filtration material used in the drum
Flow rates:
100 to 400 l/min
|
|
The Helixor Aerobic Diffusers are Static Diffusers for the Aerobic Treatment of Wastes .
Usually known as " Medium Air Bubbles Aerators " , the use of the Helixor for the Biological Treatment of Waste Waters guarantee :
> the Oxygen Transfer ;
> the Properly Mixing of the Basins , where the Helixor is applied ;
> a Turbulent Flow ;
> the Liquid Pumping .
Successfully used in the treatment of effluents of many origins (from the Galvanic Industry up to the Alimentary Industry) , their wide range of application is underlined .
Furthermore , special applications are available , such as : "Ice-Prevention System" , "Barriers" for Pollution Control .
Thanks to their properties and to their being maintenance-free , the Helixor Aerobic Diffusers represent still today the best breaktrough in the efficiency/cost ratio .
As a matter of fact more than 7,300 Helixor Equipment have been successfully supplied all-round the world by our team & organization . References are at your disposal . |
|
The Jet-Helix is an Aerobic Static Diffuser for the " Biological Treatment " of Wastes .
Provided with Fine Air Bubbles , in comparison to other systems the Jet-Helix is an High Yield Air Diffuser that , applied in the same process and operative conditions , guarantees :
> the Highest Oxygen Transfer ;
> the Highest Oxygen Efficiency ;
> a Turbulent Flow ;
> both the Mixing & the Pumping of the Liquids ,
all around the Aeration Basin / Tank .
Usually known as " Fine Air-Bubbles Aerators ", the Jet-Helix diffusers by P.E. optimize the three basic principles of the "Oxygen Transfer" , i.e.:
> an high interfacial contact ;
> a prolunged interfacial contact timing ;
> a turbolent flow .
Thanks to their Transfer Capacity , the Jet-Helix Diffusers are successfully applied for the Aerobic Treatment of Waste Waters , either for :
> Civil & Domestic Wastes ,
> Industrial Wastes ,
> Mixed and "Special " Wastes .
In the various range of their application , we underline :
> Pharmaceutical & Chemical-Pharmaceutical Industry ;
> Oil & Gas ;
> Chemical & Paper Industry ;
> Mechanical & Automotive Industry ;
> Rubber & Latex Industry ;
> Petrochemical Industry ;
> Rubber Thread Industry ;
> Refineries ;
> Oils & Metal Recovery Industries ;
> etc .
Up to now , more than 5,200 Jet-Helix Aerators have been successfully supplied all-round the world by our Team & Organization . References are at your disposal . |
|
reduction of set-up times by quick work-piece positoning on
all conventional work tables with T-grooves.
(drilling-, milling-, erosion- and measuring-machines)
-polished sliding blocks are used to fit the M-Fix positioning-system
on milling machines with 10, 12, 14, 16, 18 mm grooves.
-The selection of the positioning angel ist flexible, thanks to
positioning pins (they can be used separately; 0°, 90°, 180° or 45°)
-The retractable tenons are manufactured with a precise positoning
towards the T-groove, with a precision of only 0,015mm.
-For the clamping of the work piece you can use
conventional clamping-tools.
-Scope of supply:
4 it set base inclusive nuts and screws
alternatively adapter borders T-groove accommodation 10-18mm |
|
In the majority of the applications of vibro-abrasion the recycling of the water of treatment is possible. Two advantages with recycling economy and respect of the environment!
To recycle the effluents of the machines of vibro-abrasion makes it possible to save not only water but also the additive. The costs of destruction of emitted muds are also reduced.
Two methods are used recycling by centrifugation or flocculation.
In the case of impossibility of recycling by centrifugation we propose a broad range of physicochemical station of water treatment: us to consult
|
|
ME is a lateral beam filter press, extremely versatile, which can be customized in function of the applicative process and clients' needs. The filter press ME is full automatic, with short cycles and minimum idle times. Thanks to the simultaneous opening system of the plates pack the cake's release is the extremely quick. ME series offers both big and small models. The latter ones are the smallest filters in the world equipped with an integral automation.
|
|
Silence means quality of life. That’s why any noise should be eliminated in houses or flats to the extent possible. The FRIAPHON noise-insulating in-house wastewater pipe system reduces the sounds coming from wastewater lines to a level no longer perceived as disturbing. The system complies with all current provisions governing sound insulation and fire protection. Certainly, the system also meets all requirements in terms of temperature resistance and lifetime defined in standards and regulations.
Clean Wastewater – The Range of OEKOMAX Grease Separators
As a result of ever-increasing environmental awareness, the disposal of separated oil and grease as well as food residues gains more and more in importance. Set limits must be complied with under any circumstance. OEKOMAX grease separators efficiently protect the public sewerage system and relieve sewage treatment plants - and thus help save resources and costs. |
|
ARTES Ingegneria S.p.A. (BONO ARTES), water treatment division of the CANNON Group, is specialized in projecting and constructing of water treatment systems for civil and industrial applications.
Our company is now able to supply our Customers with a large range of products which could be summarized as follows:
- Package type chemical-physical depuration plants (Chem-Fix);
- Package type sewage treatment plants (Bioclar);
- Package type membrane bioreactor systems (MBR);
- De-oling and oily emulsion treatment plants;
- Treatment of waste water from flue gas depuration;
- Produced water treatment plants;
- Colour removal treatment plants;
- Quench-water treatment & recovery in ethylene plants. |
|
We offer storage and dosing stations for all kinds of chemicals and application.
For example:
Dosing systems for phosphate elimination
Neutralization systems
Water treatment systems
Waste water treatment systems
Cooling water treatment systems
|
|
Using our patented inert gas stripping and regeneration technology, Minox Technology offers leading solutions for deaeration - deoxygenation of different products.
Systems capacity range from 5 to 2500 m3/h.
Using no chemical (scavengers), the Minox Systems can obtain oxygen levels < 10 ppb.
(MINOX = MINimum OXygen) |
|
|
|
Liquid filtering equipment
