|
|
| Products 91 to 120 of 193 |
Problem
Reusing of secondary treated water or plant effluent possesses numerous dirty water problems. Problems include plugging of spray nozzles, fouling of pipes, blinding of sensors, scrubbers, membranes, R/O, and analyzers, wearing of pump gland seals, and plugging of irrigation heads. Such issues cause unscheduled shutdown for maintenance and cleaning.
Solution
Filtration is one of the simplest and most convenient ways of solving these problems. Automatic Filters, Inc. offers cost-effective filtration solutions to all of the above problems at a fraction of the regular costs.
|
|
Cleaning Systems: ultrasonic cleaning tanks, single or two-stage cascade immersion and spray-rinsing tanks, hot air dryers, vacuum dryers, centrifugal dryers, solvent dryers, ultrasonic degreasing machines, spray-cleaning machines.
Ultrasonics: piezoelectric and magnetostrictive ultrasonic generators, flanged or bulkhead mount submersible transducers. Available work frequencies from 19 to 70 kHz. Modular construction of the piezoelectric units allow to supply a generator also with different frequencies.
Automation: 2 or 3 axes handling systems with load capacity up to 250 kg, LIFT-Systems for vertical automation, feed and exit belt conveyors.
Water treatment: water deionising units, water treatment systems, ultra-filtration units, vacuum evaporators, reverse osmosis systems.
Painting: automatic spray-painting booth for small components.
NDT: Automatic FPI Dye-Pen, wash and developer systems.
|
|
Customers who need ultrapure water rely on electrodeionization (EDI) from GE Water & Process Technologies. Our EDI system provides key advantages over traditional ion-exchange processes:
- Eliminating expensive and hazardous chemicals used in ion-exchange resin regeneration.
- Reducing energy and operating expenses
- Reducing the facility size requirement
- Helping plants meet ISO 14000 requirements
EDI systems from GE cover many applications including power generation, microelectronics, food and beverage production, and chemical and pharmaceutical manufacturing. Using high-capacity ion exchange membranes, our EDI system removes not only residual salts but also ionizible aqueous species such as carbon dioxide, silica, ammonia and boron.
|
|
Filters separator diesel water/gas oil RACOR
Description:
- A broad range of filters for the protector of the engines with the series SPIN ONE of Parker RACOR conceived for the systems of modern injection.
- Flow of 57 with 600l/h.
- Filtration of 2,10 or 30 microns
Advantages:
- Almost indestructible transparent Bowl, resistant to UV and winter temperatures.
- Powerful pump of starting and heaters integrated in the head of the filter.
- Filter Media hydrophobic Aquabloc.
- Water Presence detector.
Applications:
- Filtration of diesel biodesel and gasoline for TP, Bus, Truck, Agriculture, Mobile, Navy, Generator sets
|
|
|
The mixed water preparation unit allows to obtain water of the desired hardness in your distribution circuits. It gives you a reduction in marking and less demanding maintenance of your sinks.
|
|
|
Barnstead, the Water Experts. Manufacturers of the most complete line of water purification products including deionization, distillation, filtration and reverse osmosis.
|
|
BS EN ISO 3696 Grades I-III
Purite offer a wide range of products to economically produce all types of purified water to a wide range of quality and volume requirements.
Technologies / Processes:
Ion Exchange: Demineralisation, Softening / Organic Scavenging
Membrane Deionisation: Reverse Osmosis, Continuous Electro-Deionisation (CEDi)
Filtration: Carbon Filtration, Physical Filtration, Ultrafiltration
Oxidation / Disinfection: Ultraviolet, Chemical, Heat
|
|
BS EN ISO 3696 Grade II
A consistent supply of all qualities of purified water on demand is crucial for the smooth operation of any laboratory. From laboratory glassware washing and reagent make up, through to life science and molecular biological applications, Purite has been supplying cost effective and reliable product solutions to organisations all over the world for over 25 years.
We offer an extensive range of options to economically produce all types of purified water, including ultrapure water, to a wide range of quality and volume requirements. Our solutions range from low maintenance stand-alone units for benchtop or wall mounting, through to centralised laboratory systems.
Our water purification systems produce water adhering to the following standards: BS EN ISO 3696 and ASTM D1193 - 99E1.
|
|
Professional high-pressure cleaning is indispensable for the maintenance and care of tools, rooms, outdoor areas and vehicle fleets in industry and the trades. The special advantage of stationary high pressure cleaning come into their own in all those places where it is necessary to clean to high standards on a regular basis.
Our stationary high-pressure cleaners provide a variety of capacities, standar equipment and water throughputs. We can therefore choose the system that best suits your specific requirements.
|
|
|
The softener works using the energy of the moving water. There is no button to push, no solenoid valve, no clock to set or reset to the correct time after power failures.
|
|
BABCOCK WANSON provides effective solutions for upstream industrial water treatment designed for the specific needs of each industry and application :
- treatment according to the inlet water quality and its use in the process ;
- optimisation of the size of the installations ;
- optimisation of the power consumption ;
- reduction of maintenance costs ;
- reduction of waste water ;
and offers tailored solutions in the field of industrial water and boiler feed water.
The analysis of the project of each customer makes it possible for BABCOCK WANSON to conceive and provide tailored combinations of several treatment techniques :
- clarification/filtration ;
- softening ;
- thermal degassing ;
- decarbonation ;
- demineralisation by resins ;
- reverse osmosis ;
- water conditioning ;
- potabilisation.
|
|
The Helixor anaerobic diffuser entails the treatment of domestic, industrial and mixed waste waters by means of anaerobic bacteria.
The Helixor anaerobic diffuser main features consist in:
- easiness of installation and utilization;
- no moving mechanical parts;
- high efficiency and oxygen transfer;
- high resistance to corrosion and chemicals.
|
|
FPS food and beverage grade cartridges have been designed to comply with all FDA requirements for the food industry. Polyethersulfone is low protein binding and therefore a good choice for fermented beverage filtrations. FPS cartridges are flushed with 17+ megohm-cm water to ensure that no manufacturing debris remains downstream to contaminate your product. This washing also ensures that all extractables which may effect the taste of the product are removed. Cartridges are designed to give maximum throughput and handle cleaning and sanitization protocols well. Each cartridge module is individually tested to ensure integrity and is absolute at the rated pore size.
|
|
Star Filters' unique blend of assembly line and custom fabrication allows us to design and build the Star Filter Press exactly suited to the customer's specific needs, at a cost much lower than one would expect to pay for custom fabrication. Star Filter Presses can be fabricated in a variety of metals including carbon steel, monel, aluminum, and other special alloys upon request.
Star Compact Polishing Filter
• Portable, four-wheel, locking-caster design
• Six 47cm precision-machined and internally ported plates for optimum sealing
• 1-1/2” tri-clamp connections
• Large usable filtration area: 405 more per plate than a 40cm design
• 304 stainless steel construction with polypropylene plates
• Small footprint: 24” long x 21” wide x 30” high
• 0.5 µm pads furnished standard
• Expandable to 25-plate design
Star DE Filter
• 304 stainless steel construction with polypropylene plates
• Ten 1-1/2” thick DE plates
• Full 1.7 ft3 of sludge capacity
• 20-1/2 ft2 of filtration area
• Expandable to a 20-plate design
Star Combination Filter
• Integral crossover plate facilitates two-stage filtration
• 304 stainless steel construction with polypropylene plates
• Ten 1-1/2” thick DE plates
• Mix and match plates for specific product needs
|
|
| ... products without technical information |
| |
|
|