|
|
|
|
|
|
MINIDIS - Portable Mini-distillation analyzer
This true atmospheric distillation analyzer is extremely compact, portable and light weight and operates as a fully stand-alone unit and performs exclusively to the latest standard for small scale distillation of petroleum products - ASTM D7344.
MINIDIS uses full automation from sample introduction to heating regulation, vapor temperature registration, volume measurement in the receiver compartment and calculation of the distillation curve from the raw data obtained during the test. This way it achieves the highest levels of accuracy, repeatability and reproducibility.
Want to get D86 test reports? A distillation run and detailed D86 test report takes about 15 minutes (gasoline) depending on the sample type. The automatic operation involves simply inserting the filling tube into the sample container and pressing "RUN". No sample preparation like cooling is necessary, neither special programming of the test conditions or prior distillation knowledge is required.
With the automatic sample introduction, the pre-programmed rinsing cycle and the use of cheap and disposable sample cups, any manual cleaning of the instrument is avoided.
Due to the true portability and rugged housing, the MINIDIS is also the perfect solution for applications, where standard lab instruments cannot be applied, such as outdoor tests or in mobile labs.
|
|
ADU 4
For the examination of motor gasolines, aviation gasolines, aviation turbine fuels, special boiling point spirits, naphthas, white spirits, kerosenes, gas oils, distillate fuel oils, solvents and similar petroleum products.
The modular system allows up-grades on demand with:
- Automatic Dry-Point Detection
- Fire-Extinguisher
- Tempering Unit
- PC or Printer
|
|
The VACUDESTsystems are equipped for unattended fully automatic continuous operation. All processes are controlled internally and major operating parameters are displayed.
Other advantages include:
- patented high-capacity separator for optimum quality of the distillate
- patented automatic adjustment to varying wast water concentration
- no rotating parts in the contaminated section
- Quickstart replaces electrical start-up heater for quicker heating to operating temperature
- heat exchanger can be pulled out manually for highest service friendliness
- heat exchanger is always wet to reduce scaling
- noise and dust protection hood
Applications
- Treatment of contaminated and mixed process waste water e.g.
- Degreasing-/ Phosphating rinse bath water
- Hardening bath washings
- Polishing and grinding coolants
- Wash and rinse water
- Casting mould emulsions
- Stainless steel etch washings
- Cutting oil emulsions
|
|
Distillation analysis is probably the most commonly performed test in refinery laboratories. The Herzog HDA 620 Distillation Apparatus makes the manual determination of distillation characteristics simple and economical.
The HDA 620 includes everything needed to immediately begin distillation analysis — including ASTM thermometers and glassware.
|
|
|
This versatile 30 place centrifuge is incomparably fast and offers a wide range of applications due to the extensive choice of different rotors. The sophisticated and optimal structured operation panel is the result of an ergonomic survey. This combination of programmable applications, rotor variety and ergonomic control panel makes your daily routine lab work easier and your unique application possible. The Centrifuge 5430 can be equipped with up to 8 different rotors, which can accommodate tubes such as 1,5/2,0 ml tubes, 15 ml and 50 ml Falcon tubes or MTP plates. The Centrifuge 5430 achieves a maximum g-force of over 30.000 x g.
|
|
|
|
|
|
The GmCLab is the perfect addition to any laboratory workbench. This compact and highly dependable personal mini-centrifuge allows to quickly separate particles from the supernatant in a solid-liquid mixture or spin down liquids to the bottom of a tube.
Gilson’s GmCLab is extremely comfortable to use and features a transparent lid that can be fully opened to an angle of 160° to allow ample access to the tubes. The pinch-type connector makes it easy to change the rotor in just a few seconds. With its small footprint GmCLab will fit on even the most crowded bench.
What type of containers can be used with the GmCLab®?
– Round or conical bottom shape 1.5/2.0 ml microtubes
– Strips of 8-PCR (0.2 ml) tubes
– Single PCR (0.2 ml) tubes
GmCLab comes with:
– 1 GmCLab module with an 8 position rotor for 1.5/2.0 ml microtubes
– 1 User’s Guide (English only)
– A 2 strip rotor for 8-PCR(0.2ml) tubes
– 8 micro-tubes of 1.5 ml
– 2 strips of 8-PCR(0.2 ml) tubes
– CE certificate (except for US model)
– One-year warranty
|
|
The Camfil Farr Pharmaseal provides cleanroom level air filtration for pharmaceutical or biotechnology facilities as well as any oterh facility where clean space ia a manufacturing or health-related requirement.
Housing is leak tested at 3.0" w.g. to ensure the housing will not leak under normal operating conditions. The housing is also visually inspected and tested for filter fit.
Is manufactured in various configurations from 0.63 aluminum or 16-gauge stainless steel.
May be installed in a T-bar ceiling or flush mounted in a solid ceiling.
|
|
The Defensor PH15 and PH 27 generate humidity on the basis of the evaporator principle: Air absorbs moisture when passing through the damp mat and is then released into the room air through the air cleansing filter set, practically free of bacteria. Dust and other particles greater than 0.05 micrometers are filtered out. Environment gases and odours are filtered out.
• Automatic mode for energy saving
• Easy and convenient handling
• Air-purifying with Quattro filter system
• Direct connection for water supply
• Low running noise
• Turnkey unit, no installation outlay
|
|
HOOD-IT
Terminal Filtration Unit designed for installation in the most common prefabricated false ceilings, ideal for the creation of small/medium controlled contamination areas.
Applications:
Clean Rooms for the Electronic, Optical, Mechanical, Aerospace, Pharmaceutical, Medical industries and Hospitals.
|
|
OMVE DEA range deaerator systems optimize conditions by removing air and gasses, using controlled vacuums and temperatures instead of chemical stripping gases.
The OMVE DEA210 and DE2320 deaerator remove gasses from a broad range of products and were specifically designed for laboratory applications to simulate industrial deaeration processes and gain similar results on R&D or Pilot scale.
|
|
SIGMAVAC Deaeration Systems are used for the degassing of fruit and/or vegetable juice, sauces, viscous liquids, and other products.
Special designs are also available for the deaeration of honey, fruit and/or vegetable mashes.
Other advantages of the SIGMAVAC Deaerator system
* Quality improvement by removal of air before heat treatment.
* Improved appearance, color and shelf life of product after filling.
* Eliminates foaming at the filler.
* Complete recovery of volatile aromas.
* Pre-assembled skid mounted units are available for fast on site installation. They can be stand alone units or integrated with existing process equipment.
|
|
|
|
|
|
K45000 Front View Distillation Apparatus
Front View Distillation Apparatus, Groups 0, 1, 2 and 3–Meets all ASTM and related specifications for distillation of motor and aviation gasolines, aviation turbine fuels, naphthas, kerosenes, distillate fuels, natural gasoline, liquid hydrocarbon mixtures and other petroleum products. Consists of fully insulated stainless steel condenser and heater units. Heater unit includes flask support platform, viewing window, 1000W heater with stepless variable control, and rack and pinion heater elevation mechanism with push-turn control knob. Please inquire about higher wattage heaters. White receiving flask background facilitates viewing of fractions during test. Available with right-hand or left-hand heater unit for convenient pairing. Includes graduate support block and flask support boards.
Group 4 Front View Distillation Apparatus–Front View Distillation apparatus designed for testing of Grade No. 2 fuel oil, Grade No. 2-D diesel fuel oil, gas oils and other distillates requiring condenser bath temperatures of up to 140°F (60°C). Also suitable for gasolines, aviation turbine fuels, naphthas, kerosenes and other liquid petroleum products. Similar in features and construction to the standard Front View Distillation Apparatus, but equipped with a 300W copper immersion condenser heater with stepless electronic control
|
|
PAC OptiDist™ is the State-of-the-Art Optimal Solution for performing atmospheric distillation offering highest precision and ease of use ever seen. The new distillation analyzer combines eighty years experience of the companies Walter Herzog and ISL in designing and manufacturing automatic distillation equipment.
TOP VALUE OFFERING IN THE MARKETPLACE FOR ASTM D86, EN ISO 3405 & IP 123 TESTING
Eighty years combined experience of the companies Walter Herzog and ISL in designing and manufacturing automatic distillation equipment, PAC developed the most revolutionary automated distillation analyzer ever built.
|
|
AIR-1-HT
Independent filter fan units designed for large Sterile Rooms and/or Laminated Airflow Systems, where the levels of cleanliness, noise and absorption are extremely strict.
The AIR-1-HT series Filter Fan Units offer cutting edge technology for modern Sterile Rooms.
Appliances:
Sterile Rooms and Laminar Airflow Systems for the Microelectronic, Electronic, Optical, Mechanical, Aerospace, Pharmaceutical, Medical industries and Hospitals.
|
|
|
|
|
|
Laboratory centrifuge for continuous separation of two liquids, clarifying of liquids from solids, emulsifying of several liquids, fraction of plasma protein, concentration and extraction of viruses and bacteria as well as further fields of application.
Function
CEPA centrifuges are characterized by their ability to process many times the volume of their tubular bowl. Fluid mixtures are fed into the bottom of the rapidly rotating separation chamber. Solids are retained, while liquid components are expelled from the top of the chamber through a collection tray. For liquid-liquid separations, two collection trays are used. The retained solids cake is dry and densely packed by the high G-forces of the CEPA centrifuge.
Benefits
Quick separation
Continual capacity
Easy installation and handling
The results can be correlated to production centrifuges of type Z 41 to Z 101
Favourable maintenance
Small space of installation saves valuable room
Deliverable in closed execution
Technical data
Type/Model: LE / GLE
Throughput l/h*: 30
rpm: 15.000 to 40.000
G-force max.: 40.000
geometric content: 0,25 l
* The max. throughput is related to water.
|
|
|
|
|
|
CEPA centrifuges are characterized by their ability to process many times the volume of their tubular bowl. Fluid mixtures are fed into the bottom of the rapidly rotating separation chamber. Solids are retained, while liquid components are expelled from the top of the chamber through a collection tray. For liquid-liquid separations, two collection trays are used. The retained solids cake is dry and densely packed by the high G-forces of the CEPA centrifuge. Plastic bowl liners are available for models LE, Z41 and Z61 to facilitate cell paste removal.
The optimum size of a centrifuge for a given application depends on the properties of the process liquid. Typical process volumes specified for each centrifuge are approximate. Contact NBS for a no-obligation consultation regarding your specific application.
TYPICAL APPLICATIONS
- Harvesting biomass
- Clarifying process liquids
- Separating liquid products
- Fractionation of human blood
- Animal blood processing
- Bioremediation
- Processing of granular, crystalline and fibrous suspensions
- Separation of filterable and non-filterable sludges
FEATURES AND BENEFITS
- Rapid separations.
- Consistent performance.
- Range of models facilitate scale-up.
- Simple to set up, easy to use and rapidly cleaned with minimal downtime.
- No fragile membranes to install.
- No replacement membranes, or costly disposables
- Small footprint saves valuable space
- Enclosed models available to help control aerosols and ambient gas and attain quieter operations
- For mixtures with extremely high solids concentrations, drum centrifuges can be supplied
- Powerful 3-phase electric motors (in models Z41 - Z101) provide rapid acceleration, and quieter operation
- Permanently lubricated oversized head bearings maintain long service life
|
|
Whether you need a refrigerated or non-refrigerated centrifuge for low, medium or high-throughput applications, one of these bundles will definitely suit your requirements.
The Cell Culture Centrifuge Bundles are optimized for swingbucket rotor applications in standard 15 ml and 50 ml Falcon® tubes.
Cell Culture Centrifuge Bundle includes
* Centrifuge 5702, 5804/ 5804 R or 5810/ 5810 R
* Swing-bucket rotor incl. buckets
* Four adapters for 15 ml Falcon® tubes (two sets of 2)
* Four adapters for 50 ml Falcon® tubes (two sets of 2)
The Clinical Centrifuge Bundle is optimised for Centrifuge 5702 R with adapters for 13 mm and 16 mm blood collection tubes or urine tubes.
Clinical Centrifuge Bundle includes
* Centrifuge 5702 R
* Swing-bucket rotor A-4-38 incl. round buckets
* Four adapters for 13 mm blood collection tubes or urine tubes (two sets of 2)
* Four adapters for 16 mm blood collection tubes or urine tubes (two sets of 2)
|
|
Gentle separation/perfusion system providing separation forces up to 320 g. Two systems are available - CENTRITECH® LAB-II and CENTRITECH® CELL.
Benefits
-Gentle cell handling coupled with removal of dead cells, offering higher viability and productivity
-Closed system with pre-sterilized disposable inserts
-Eliminated need for CIP/SIP
-Automated continuous separation
-Ergonomic design suited to modern laboratory environments
-Full scalability for perfusion bioreactors (5-3000 liter) or cell harvest (5-600 liter)
|
|
|
A powerful, easy-to-use solution, the Sorvall RC12BP? low-speed refrigerated centrifuge allows you to manufacture blood components quickly and cost-effectively while ensuring product quality, safety, and GMP compliance.
|
|
|
Position of type II microbiological safety in line with the standard NF-EN12469. Tight closure. Glass tilted and rotate for easy cleaning of the glass side. Hydrogen Peroxide Decontamination.
|
|
|
|
|
|
The Microflow Class III/I Advanced Biological Safety Cabinet provides operator and product protection for work with up to category 4 pathogensABS Class III
This adaptable dual purpose cabinet is designed for laboratories where it is essential to have Class III facilities for work on Group 4 organisms, alongside a requirement for Class I work. From Class I mode the cabinet can be instantly closed to become a Class III unit by the ready fitment of a glove port panel, should Group 4 pathogens be identified.
A transfer hatch on the left hand side of the unit allows instruments and materials to be passed inside without disturbing the integrity of the unit. The flexible gloves are easily manipulated by the end user and offer complete isolation from materials being handled.
The inlet and exhaust HEPA filters are designed for maximum operator protection and are protected by pre-filters. In Class III mode the inlet filter provides a stream of filtered air into the cabinet preventing any contamination to materials inside.
The microprocessor controlled membrane keypad allows straightforward operation of fan switching, lights and safety features. The cabinet has audible and visual alarms for air velocity and filter change ensuring maximum protection at all times.
|
|
|
|
|
|
Pure water is a vital resource for every scientific application. Aurora Biomed's Crysta Series is a line of water purification systems that delivers the best technical results for any lab. The Crysta 500, 1000, and 2000 systems produce highly purified lab water for three different areas of scientific applications. Both accurate and reliable, Crysta delivers high quality purified water that meets the American Standard for Testing & Materials water purity specifications. Crysta also surpasses the Clinical & Laboratory Standards Institute standards for Type 1 and Type 2 water purity levels.
Aurora Biomed's Crysta Series uses special system features to deliver pure lab water to meet any pure water demands- a timed dispense mode allows for walk-away unattended operation, innovative cartridge monitoring systems ensure purity standards are met, and real time displays let the end user actively monitor water purity levels. By delivering highly purified water at its reliable, efficient and robust rate, the Crysta Series is a proven cost-effective and high performance water purification system that will deliver significant value to any lab
|
|
18.2 megohm
Purite offer a wide range of products to economically produce all types of purified water to a wide range of quality and volume requirements.
Technologies / Processes:
Ion Exchange: Demineralisation, Softening / Organic Scavenging
Membrane Deionisation: Reverse Osmosis, Continuous Electro-Deionisation (CEDi)
Filtration: Carbon Filtration, Physical Filtration, Ultrafiltration
Oxidation / Disinfection: Ultraviolet, Chemical, Heat
|
|
BS EN ISO 3696 Grade II
A consistent supply of all qualities of purified water on demand is crucial for the smooth operation of any laboratory. From laboratory glassware washing and reagent make up, through to life science and molecular biological applications, Purite has been supplying cost effective and reliable product solutions to organisations all over the world for over 25 years.
We offer an extensive range of options to economically produce all types of purified water, including ultrapure water, to a wide range of quality and volume requirements. Our solutions range from low maintenance stand-alone units for benchtop or wall mounting, through to centralised laboratory systems.
Our water purification systems produce water adhering to the following standards: BS EN ISO 3696 and ASTM D1193 - 99E1.
|
|
| ... products without technical information |
| |
|
|
Filtration and separation systems for laboratory
