|
|
|
The range presented in this chapter consists of centrifugal double inlet fans. In response to your specific needs, the air flow, power, rotational speeds (multispeed by windings or by controllers), noise level, overall dimensions and finish... of the fans can be specifically defined according to your requirements.
|
|
|
The range presented in this chapter consists of backward curved centrifugal fans. In response to your specific needs, the air flow, power, rotational speeds (multispeed by windings or by controllers), noise level, overall dimensions and finish... of the fans can be specifically defined according to your requirements.
|
|
Hartzell Fan's Fiberglass Backward Curved Centrifugal fans utilize our unique one piece, solid fiberglass FA wheel to provide high efficiencies with non-overloading horsepower, low noise, and low RPM. It offers consistent performance and energy savings.
Standard with UV (ultraviolet) inhibitor and flame retardant resin.
Now selections over 18" static pressure are also available using the new higher pressure FH wheel.
Sizes up to 60" with CFMs up to 90,000 at free air.
|
|
|
The Euromate fan range consists of high quality single and central fans and a portable fan for welding operations in confined spaces. The installation of a single fan to each extraction arm guarantees an optimum extraction. Central fans are designed for central installations serving several extraction arms. Central fans can be used for 3 to 15 extraction arms.
|
|
|
This essential component to carry outside warm combustion smoke from pellet fireplaces, is driven by an high-performance external rotor fans, enable to maintain long-life operational stability. The fan offers fair silence and the tachometer to control fan speed.
|
|
|
PlymoVent's TEV-series fans are design to be used as central fans. These fans are equipped with a light weight aluminium impellers, suited to exhaust gases, volatile fumes and dust. Matched inlet and outlet areas provide, together with the optimized impellers, an even air flow, higher capacity and lower noise level.
|
|
Hartzell's Industrial Exhausters are designed to meet industrial air moving and pneumatic conveying requirements. They are designed for heavy weight service with ruggedness, use, long life, reliability, and performance taken together Available in clockwise and counterclockwise rotations and in standard discharge positions; on Sizes 12" to 29" discharge positions are rotatable; on Sizes 33" to 57" they are fixed position Multiple wheels are available - Type MH (open wheel), TH (open trim wheel), and PW (open paddle wheel) are available in all sizes; Type PR (reinforced paddle wheel) is available in sizes 29" to 57"; and a Type AH (air wheel) is available for high pressure applications.
Sizes 12" to 57" wheel diameters in multiple arrangements, Class II, III, or IV CFM in Class II from 250 to 40,500 with SP up to 20", Class III from 1,725 to 45,625 with SP up to 30", and Class IV from 2,400 to 45,625 with SP up to 46"; total efficiencies are 72%.
|
|
Quality is built into each fan. Starting with the finest materials available, using computer aided precision cutting equipment, properly trained personnel and incorporating the latest assembly techniques, insures that each KCH Services fan is of the finest quality.
To better serve our customers, KCH offers a complete line of replacement parts include belts, bearings, wheels, shafts, motors, as well as complete housings, epoxy coated steel frames, belt and shaft guards and flexible inlet connectors.
KCH Services certifies that the CI and NH Fans shown herein are licensed to bear the AMCA Seal. The ratings shown in our fan catalog are based on tests and procedures performed in accordance with AMCA publication 211 and comply with the requirements of the AMCA Certified Ratings Program.
|
|
Paxton's Fume Exhausters and Vacuum Producers provide a reliable, non-pulsating source of air / fume vacuum which is ideally suited for applications such as:
- Flat Sheet Hold-Down
- Air Monitoring & Sampling
- Pneumatic Conveying
- Suction Pick-Up
- Tank Exhaust Systems for Brewing or Storage
- Textile / Fabric Cutting Systems
- Bag or Package Filling
- Transfer of Air or Gases
- Process Air
- Fume Exhauster
- And Many Others
|
|
|
The SERIE EP centrifugal electrical fans with simple inlet are especially suited to applications where it is necessary to feed clean air at temperatures up to 100C. They are produced in painted steel.
|
|
Centrifugal Fans & Blowers
These are curved forward bladed centrifugal fans, available in single or three phase, DC or 400Hz, and ATEX versions. Additionally speed controllers can be fitted and heat spinners can be supplied to withstand temperatures of up-to 150 c.
Our centrifugal blowers have forward and backward curved blades, single and double inlet, with or without housing, ideal for general extraction and cabinet cooling applications.
- Flow rates up to 4000M/Hr (2350CFM)
- Pressures up to 15 mBAR (6 In.SWG)
- Available in single or three phase, DC or 400Hz, and ATEX versions
- A comprehensive range of accessories is available, for example, speed controllers can be fitted and heat spinners can be supplied to withstand temperatures of up-to 150 c.
- Volume or specialised bespoke available
- Full design and testing facilities, including airflow and noise testing
|
|
ACI's Slimline Range
This range of ultra-compact slimline fans is used extensively in the OEM industrial sector, where space is at a premium. These innovative designs use inside out motor driven forward-bladed impellers allowing dimensions to be kept to a minimum.
- Performance Figs: Flow rates up to 1000M/Hr (600CFM)
- Pressures up to 7.5 mBAR (3 In.SWG)
- Other Features: A comprehensive range of accessories is available, for example, speed controllers can be fitted
- Volume or specialised bespoke available
- Full design and testing facilities, including airflow and noise testing
|
|
You van rely on us for the following centrifugal fans:
- standard single inlet fans
- standard high pressure fans
- synthetic fans
- double inlet fans
- rooftop fans
- special fans
- oven circulators
The standard models of these fans come with very short terms of delivery.
|
|
CS series, MS series, and FMS series
Futural: ventilation, cooling and drying application for oven, plastic, printing and other industries.
Selling individually is available for all fan parts.
SSD series
Futural: for indoor and kitchen ventilation, cooling, and drying
|
|
The Cobra centrifugal fans are specially designed to solve the majority of ventilation problems i.e., pits, tanks, vessels and confined
spaces...
Easy maintenance:
Its compact design makes it adaptable to the most diverse operations of, service, fresh air input and elimination of contaminated air.
Adaptability:
Numerous accessories are available, allowing the Cobra to ventilate anything anywhere.
Security:
The Cobra also exists in a compressed air version. In order to avoid the risks of an explosion in certain hazardous atmospheres.
Fan available in ATEX version (type examination certificate INERIS 04 ATEX
3002X) II2 G or D or GD, II3 or D or GD.
|
|
On 1 January 2008, the production of industrial fans started at the new Elektror facility in Zabrze in Poland. The following types of fans are produced:
- Centrifugal-Low Pressure Fans CFL (up to 3.100 Pa and 87.000 m3/h)
- Centrifugal-Medium Pressure Fans CFM (up to 5.400 Pa and 98.000 m3/h)
- Centrifugal-High Pressure Fans CFH (up to 9.000 Pa and 112.000 m3/h)
- Centrifugal-Extrem High Pressure Fans CFXH (up to 13.800 Pa and 104.000 m3/h)
- Centrifugal Conyeying Fans CFMT (up to 6.200 Pa and 29.500 m3/h)
All our centrifugal fans offer the following characteristics:
- Rugged fan housing made from steel sheet
- Impellers with suction on one side with welded blades with backwards curvature made from steel sheet
- Maintenance-free squirrel-cage motors with protection rating IP 55
- Fans with right-hand or left-hand turning
- Direct drive with base motor B3 or flange motor B5 V-belt drive can be supplied with base frame
- On request 2-stage, continuous for frequency converter operation
- Many accessories, such as connector spigots, cleaning apertures, condensate draining spigots etc.
- Non-standard fans for special conditions, e.g. higher temperatures of medium and/or environment, extended corrosion protection, fan sealing, special voltage, special frequency, increased protection rating
|
|
Lightweight devices that can be collapsed and easily moved
With 12 V drive, independent operation possible (integrated batteries)
Easily transportable on HGVs delivering pellets
|
|
VMI MANN
VMI 07 - VMI 15
DESCRIPTION:
IN-LINE fans in a soundproof box
Airflow: 1.170 - 10.000 m3/h
APPLICATIONS:
- General ventilation.
- Stuffy environments renewal.
- Parkings.
|
|
Impeller diameter for AC-input: 50mm - 160mm
Impeller diameter for DC-input: 80mm - 120mm
Air capicity 0.21m/min - 9m/min
Static pressure 37Pa - 686Pa
AC-input: 200/220/230V AC or 100/110/115V AC
DC-input: 24V DC
Marking: CE, UL and cUL
|
|
- High-efficiency fans in all power ratings
- RBTP: Standard pulley/belt, transmission from 10 to 150 hp
- RB: Standard, transmission directly from end of motor shaft, 2 to 25 hp
|
|
ALUMINIUM CENTRIFUGAL FANS
Centrifugal fans for continuous use in industrial processes like aireting, blowing off, pneumatic transport, furnace burners etc
|
|
The fans are available in a wide range of designs and performance levels.
All units with a suction output of up to 3.000 m3/h are pre-cast in aluminium (delivery includes turnbuckle); units with at least 3.500 m3/h are supplied in sheet steel (delivery includes vibration absorber).
The statics and dynamics of every fan have been balanced to ensure that it runs quietly and smoothly.
As they are robustly built, the fans can be used for continuous service.
|
|
Design Complete radial fans (motor attachment impeller housings [accessories]) Radial fans - integrated modules (motor [flange] impeller) For the 100 - 1,200 Pa pressure range and air volumes of 300 - 1,000 m3/h.
Main applications Heating branch, air conditioning/and drying technology, ovens, curing chambers
Special applications Railway technology, medicine technology, ventilation and extraction
Performance range 120 -750 W
Size 63 - 90
|
|
|
The Secomak range of fans, blowers and exhausters offer high performance units that are both flexible and compact. These heavy-duty, high-quality units are suitable for a variety of industrial applications which include: drying, cooling, air-knife applications, heating, cleaning, pneumatic, conveying, aeration, fluidising, air-sampling, extracting, combustion air, vacuum lifting and holding.
|
|
Installation/air circulation fans
No housing to save space
Must be integrated into machinery
Easy installation with motor flange
The illustration below depicts a special design -
ATEX model with mounting frame
|
|
Centrifugal channel fans EPK / DPK for commercial use: durable, powerful and robust
For air extraction
Commercial premises
Workplaces
Showrooms
Production facilities
Industrial buildings
High degree of protection IP55
Installation in rectangular ventilation channels
Galvanised housing with externally fitted terminal box
Flange profiles fitted on the inlet and outlet sides
Single phase AC version (EPK) and three-phase AC version (DPK)
Air flow volume up to 6,500 m/h
|
|
|
|