|
|
General grade membrane cartridges are designed for general purpose use wherever a cost effective membrane filter is required and is offered in polyethersulfone, nylon, Teflon, and polypropylene. Designed to hold the maximum amount of filter media that can be completely and effectively utilized in a cartridge, General grade membrane filters lower the cost of filtration . Membrane cartridges are flushed with 17+ megohm-cm water to remove potential extraneous manufacturing debris. These cartridge modules are also individually tested. Priced below special purpose cartridges, General grade membrane cartridges are still manufactured with the same careful attention to both quality and performance.
|
|
Polyethersulfone, Polypropylene and Nylon
Membrane Filter Elements
Shelco's new MicroVantageTM pleated membrane cartridges are designed to meet the high standards of today's industry. These cartridges are manufactured to the most stringent production standards making them the new benchmark of the industry. Manufactured in an ISO 9002 environment,each general grade cartridge has its own lot code for traceability. Each operation including assembly, testing, cleaning, drying and packaging is done in an appropriately rated and certified clean room.
Other products available:
|
|
GE Water & Process Technologies brings more than 30 years' experience and engineering expertise to the development of spiral-wound membranes and filtration systems for pure-water, industrial, and food, beverage and pharmaceutical applications. GE provides the broadest product line in the industry with a complete range of membrane filtration processes:
Microfiltration (MF)
Ultrafiltration (UF)
Nanofiltration (NF)
Reverse Osmosis (RO)
|
|
The Perfect Choice For Your Problem Solutions
Products available:
Single Cartridge Housings
Multi Cartridge Housings
Bag Housings & Bags
Jumbo Housings & Elements
Sanitary Housings
Plastic Housings
MicroVantage Absolute Rated Cartridges
High Efficiency Pleated Cartridges
Nominal Rated Cartridges
|
|
|
PROGAF filter bags bring a new, high-performance alternative to applications requiring absolute filtration. Their progressive density depth filtration delivers high efficiency (up to 99.9%) and long life like a filter cartridge with all the convenient features of a bag filter. In comparison with other filtration technologies, PROGAF delivers lower operating costs while retaining the ease of change-out typical of a bag filer.
|
|
Bags for fluidised beds consist of a base - which is normally circular - from which bags spread out sideways and upwards, to be secured at their tope end to a supporting grid.
The base is fixed with a flange to a container holding the product at a specific humidity level, to be heat dried.
This container has hot air inlets, the air from which has to pass through the mixture to be dried in order to escape, so that bubbles are produced with the contact between air and product and the humidity is extracted from the product.
Due to the gradual contact between the air and the mixture, increasing amounts of powder are generated and these are dragged into the bags towards the lower pressure inside them, as more air and more powder are generated.
The bags hold the powdered product and let the air through without letting any particles into the emissions.
The fabrics used are anti-static, to avoid static build-ups which might make it harder for the powder to fall out of the bags, at the same time neutralising any possible risk of explosion.
Here at ICT FILTRACIÓN S.L. we believe we are true specialists in making these bags, having had the leading pharmaceutical laboratories as customers. From them we have learnt all the details we need to do our job accurately and under strict control.
|
|
|
EUROFILTRAZIONE is a leading company in the production of filter elements for industrial applications, and produces a complete range of filter cartridges for EDM machines, of both edge and plunge type. The use of filtering materials specifically conceived for this purpose, ensures the best possible results. EUROFILTRAZIONE filter cartridges are in fact top of the range both in relation to national and foreign production output. The winning features of these cartridges being a high filtering capacity with low charge loss, and considerable storage capacity in even the most severe operating conditions, thereby ensuring the long working life of the product. Thanks to these features, and highly competitive price levels, it possible to greatly reduce filtering and electro-erosion costs without in any way jeopardizing performance levels. EUROFILTRAZIONE is therefore a truly top-level manufacturer, capable of meeting customer requirements both with a range of standard products as well as with special products, suitable to face specific challenges.
|
|
MATERIAL
Inox Aisi 304/316
Bronze - Brass
Iron - Zinc plated Iron
WIRE DIAMETER
from 0,04 up to 2 mm.
NUMBER OF STITCHES
from 1,5 up to 26.000/cmq
FILTERING DEGREE
from 15 up to 2.000 microns
TYPE OF FILTER
simple or compound
Filters:
3 dimensional
Cylindrical
Conical
Planes
Disk
Porous
Sector of application:
Pneumatic equipment
Household-electric industry
Painting sector
Motor industry
Thermohydraulic industry
Manufactured using clothes and supports in metal and plastic materials.
|
|
CPD pleated polypropylene depth cartridges are designed for clarifying applications requiring high flow capacity. The depth media utilized in the CPD product line is high loft Melt-blown polypropylene which gives exceptional flow characteristics and high dirt holding capacity because of its high internal porosity. Fine polypropylene fibers are bonded together to ensure no fiber release in a fiber matrix that maintains high porosity. Rated at 99.9% efficiencies make it a cost effective filter designed to extend final filter life.
|
|
Designed always to meet the needs of the cleanliness class, pressure requirements and characteristics of the medium, stable and constant pressure MAHLE filter elements with their high contamination retention ability ensure economical and trouble-free operation. Our extensive range of standard and DIN version products also contains alternative variants for virtually every make of filter and filter element for aggressive fluids, cooling lubricants and aqueous media.
We will also develop special versions to meet individual customer requirements.
|
|
Nominal Rated Pleated Cartridges
Shelco® introduces its full line of nominal rated pleated filter cartridges. With more square feet of filtering media, this cartridge offers more dirt holding capacity and longer changeout intervals then any other cartridge on the market. Made of economical polyester/polypropylene blended media, these cartridges are the best alternative to string wounds, resin boned, or spun cartridges. The MicroSentryTM ME pleated cartridges are made of 100% synthetic fibers to eliminate any contamination from binders or additives. Make Shelco's ME series your choice for longer life and lower filtration costs.
Other products available:
|
|
The reliability and efficiency of any filtration system is chiefly dependent on the quality of the cartridges used in it. Our full line of quality HILCO cartridges includes various sizes, filtration efficiencies and dirt-holding capacities for virtually every application. HILCO can restore many oils and coolants to a like-new condition.
All cartridges are developed to provide long service life and high quality. Many different media are specially selected, formulated and fine tuned on a regular basis to provide the most effective combination of fluid compatibility, particle-separation efficiency, low pressure drop and structural properties.
Controlled radius pleats are designed to maximize filtration area and dirt-holding capacity while resisting pinching, distortion and rupture. Gasket materials and adhesives are selected based on their compatibility with fluids and operating temperatures of each application. Cartridges feature rugged, fiberglass filled nylon and plated steel centertubes which resist collapse at high pressure differentials.
Fuel gas, process gas, seal gas, H2O injection, and transformer oil applications can also be accommodated by HILCO. We also make HILCO-quality replacements for other brands of cartridges used in lube oil and fuel oil applications.
|
|
You need cartridge filters with long life, high efficiency and low total operating cost and that's what you get from GE Water and Process Technologies. With an extensive range of filters to meet all of your microfiltration needs:
- RO pre-treatment
- Pure water filtration
- Food and Beverage
- Electronics
- Oil and gas
- Chemical processing
- Pharmaceuticals
- Medical
- General industry
GE provides, and continues to develop, high-performance products backed by years of experience. Our cartridge filters are made with no wetting agents, solvents, anti-static agents, or binders. FDA-compliant filters are available for food and beverage contact.
|
|
|
Extended Filtration Surface. Sixty deepfold pleats multiply the available filtration surface area. This construction offers greater contaminant holding capacity compared to the cylinder-type tube. Other advantages of the Sethco Pleated Filter Cartridge are high strength, polypropylene construction, resistance to deterioration, inertness to tough liquids such as corrosive electroplating and sensitive photo and processing solutions. Reusable and long lasting under the toughest liquid conditions make it ideally suited to all industrial and laboratory filtration applications.
|
|
We design filter cartridges which have hinged bolts damp lids. These cartridges are used for a variety of applications like filtration of hydraulic oils, lube oils, fuels, cutting fluids, coolants, washing fluids etc., Their housings are sized depending on the application & rated flow requirement. These can be designed for higher pressures. The housings of verity of material of construction are supplied depending on the requirement.
Working:
The dirty fluid is pushed in the filter housing under pressure. Filter elements of correct filtration rating are placed in the housing depending on the flow & other requirements. The ends of the filter elements are sealed so that the fluid is made to pass through the filter medium only, to leave the dirt on the filter medium. Generally the inlet & outlet are in one line. However the position of the inlet could be altered as per the requirement.
|
|
Microfilters clear the medium of very small particles and thus most of all serve to protect: They protect other microfluidic components located behind them, the result of a highly sensitive chemical analysis or the user of a drug dosing pump.
Off the shelf Bartels microComponents sells microfilters in dimensions corresponding to those of the Bartels microvalves. By that, a perfect combintion of functional elements is offered.
|
|
The filter elements are manufactured by isostatic pressing or co-axial pressing. The pore size can be adjusted by suitable selection of the powder size fraction and the process parameters. It includes the type of tube, disc and stack of lamination and so on.
Main advantages
1. Good shape stability
2. High strengthen and good integrity
3. Controllable pore sizes and porosity
4. Good permeability
5. Good corrosion and thermal resistance
6. Easy to be made into complicated shapes
7.Highly mechanical strength, can diffusing air homogeneously.
|
|
Here at ICT Filtración we select fabrics with great care, cut the cloth to size using optical laser machinery and sew it with leading-edge automatic systems in order to achieve the ideal filter cloths for your pressure filter.
Trust our personalised advice.
|
|
On-Site Pack Making:
SPX Cooling Technologies' extensive knowledge and experience in manufacturing Marley cooling tower PVC film-fill carries over into PVC media production for the biomedia market. Our capabilities in fill production include the ability to manufacture adhesive bonded packs at the jobsite. In some cases, the ability to manufacture fill on-site means a lower cost to the customer and assures the highest quality product available and eliminates the dependency on freight carriers.
This ability also assures a timely delivery of packs at the jobsite potentially
reducing construction downtime and labor costs.
Construction Services:
As a single-source supplier for cooling tower components, SPX Cooling Technologies extends the same philosophy to water waste treatment/biomedia installation. Construction is an integral part of the teamwork responsible for function and performance of your biological wastewater treatment. MARPAK biomedia is installed under the supervision of trained and experienced personnel-in most cases the entire crew are full-time SPX employees. Our superintendents are trained in the proper procedures for Marley fill pack installation-their many years of experience enables them to spot potential problems during the construction phase. SPX Cooling personnel installing Marley components on a regular basis insures consistency and quality.
|
|
Whatman filter papers are world-renowned as the standard for laboratory filtration and are associated with quality, reliability and customer service. The familiar Whatman Blue Box is the laboratory benchmark for filtration. Papermaking skills have been developed to the highest level, with the expertise and technology to manufacture innovative multilayer materials.
|
|
Whatever type of filter you use, Allegheny Bradford can supply a housing that meets your needs. Our line of Universal housings combines the best features of the finest stainless steel filter housings on the market with a full range of custom options to tailor your housing to your specifications.
We offer an array of Universal housings to fit virtually any filtration system, designed especially for use in ultrapure, sanitary and hitechnology industries including electronics, pharmaceuticals, food, dairy, beverage and chemicals. These flexible Universal housings accept a wide variety of cartridge, disc, membrane, ceramic and metal media, to meet even the most complex multiple processing requirements. They are available in a full range of sizes to fit everything from small gas filtration units to massive 270-element housings for water purification.
Best of all, they provide the advanced design, precision fabrication and superior quality of the industry's leading manufacturer - at very competitive pricing.
Our fabrication specialists use only the finest materials available including type 304, 316 and 316L stainless steel. To insure accuracy, machining is performed on state-of-the-art CNC equipment. Our welders are ASME certified, and use the most advanced welding equipment available. In addition, mechanical polishing or electropolishing can be performed right at our facilities to achieve the quality finish your application requires. From the initial inspection of raw materials, to the final ASME Code compliance check, our filter housings undergo rigorous testing and documentation procedures throughout the manufacturing process to meet the most stringent industry standards. All Allegheny Bradford filter housings can offer:
ASME Code Compliance with U and UM stamps and National Board Registration
Material test reports
Profilometer-certified surface finish
Hydrotest
Radiograph analysis of welds
Helium leak test
Borescope inspection
Other certificates of compliance
As the largest independent manufacturer of stainless steel filter housings for sanitary, ultra-pure and high technology applications, Allegheny Bradford is uniquely positioned to meet your filter housing needs. By purchasing your filter housings directly from us, you receive the highest quality units on the market, customized to your specifications at a very competitive price. And our dedicated team of engineers, designers and customer service specialists make sure you get what you need in a timely manner. Quality. Value. Availability. When it comes to filter housings, Allegheny Bradford puts it all together for you.
Whatever stainless steel components you need for your ultra-pure process, from filter housings and skids to custom tanks and heat exchangers, count on Allegheny Bradford Corporation to deliver - on time and on budget. For more information on our full range of products and services, call us today at 800-542-0650.
Our Universal filter housing line combines the affordability and availabilty of standardized units with the custom features your application requires. By manufacturing a wide variety of components in advance, we are able to design and deliver a filter housing that incorporates features specifically for your processing environment, quickly and cost-effectively. Choose from an extensive range of options, including:
T-Style or in-line construction
ASME code stamp
Various cartridge sockets
Gauge ports
Vent and drain valves or ports
Various inlet and outlet connections
ID surface finish to less than 10 microinches Ra
Electropolish
OD surface finish to 400 grit
Steam/hot water or cooling jacket
Private label etching
Click here to download a PDF version of the Sanitary Stack Disk Housing (SD-WS) drawing.
Click here to download a PDF version of the 12.75" OD 1-Post Stack Disk Housing (stackdisk) drawing.
Click here to download a PDF version of the Sanitary 1 Round In-Line Housing (USI01-WS) drawing.
Click here to download a PDF version of the Sanitary 1 Round T-Type Housing (UST01-WS) drawing.
Click here to download a PDF version of the Sanitary 3 Round T-Line Housing (UST03-WS) drawing.
Click here to download a PDF version of the Sanitary 6 Round T-Line Housing (UST06-WS) drawing.
Click here to download a PDF version of the Sanitary 12 Round T-Line Housing (UST12-WS) drawing.
|
|
PiP housings and PiP elements are used for process filtration. It is about a brand-new developed series of filters. It includes pleated cartridge filter elements and bag replacement elements for process filtration as for instance filtration of cleaning liquid, lacquers, colors. Originally, pleated cartridge filter elements were developed for the filtration of cleaning liquids, nevertheless they are applicable in a wide range of areas.
|
|
Single Bag Housings: #1, #2, #3 and #4 sizes
Shelco ®BF series bag housings are manufactured of 304L or 316L stainless steel and carbon steel.Designed for 150 PSI (10 bar)and for temperatures to 300 °F.Protective poly coat over stainless steel is standard finish.Positive hold down spring and adjustable stainless leg assembly are standard features on the #1 and #2 size housings.
Other products available:
|
|
|
A FLOWLINE stainless steel bag filter housing from Eaton is the best choice for industrial, commercial and OEM applications that do not require a Code Stamp. Its cost-effective design incorporates all of the features heavy duty applications demand, including an investment cast swing bolt cover that can be adapted to different opening directions in the field and a quality stainless steel mesh restrainer basket for reduced pressure drop.FLOWLINE's stainless steel construction ensures years of trouble-free, consistent performance at a price comparable to that of many carbon steel housings.
|
|
|
Designed for removing trace contaminants down to 1 micron. Ideally suited for filtering and corrosive solutions including electroless copper and nickel to 200°F (93°C).
|
|
CIH multi cartridge V-band clamp closure housings are a proven design suited for commercial and industrial applications. Offered in 4,5,7,12,and 21 round configurations and in 304 SS or 316L SS. All CIH housings are designed with Universal cartridge cups, allowing you to use DOE style cartridges or 222 SOE cartridges with fin or flat end. This gives you one housing that can meet your nominal and absolute filter needs and provides quick cartridge change outs. Housing is standard with EP gasket and also offered in other materials and port sizes, allowing the CIH to meet a wide spectrum of applications. Every housing is supplied with a mounting kit and operations manual.
|
|
Multi-Cartridge Housings
We manufacture a complete line of four and five round models to accommodate a wide range of flow rates. Options include 304L or 316L stainless steel; band clamp or swing bolt closure. Design pressure 150psi (10bar)@300ºF (149 ºC). Standard inlet and outlet connections are 2" MNPT with many other options available. Standard finish is poly-coat over stainless and other options can be special ordered. Standard gasket is FDA grade Buna-N.
Other products available:
|
|
The Hilco TurboFlo Duplex Filter line is easy to operate and maintain with a low turning torque and no jacking of the sealing pads. Welded-in transfer valves and high flow synthetic elements save space, and flow is under the filter cartridge which does not impinge on the filter elements. With no flanges between the transfer valve and filter housing, there are fewer potential leak points.
Features includes:
• ASME Code construction
• O-ring sealed covers
• Coreless elements
• Standard carbon steel and 316 stainless steel
The TurboFlo Duplex Filter is also available in 1-1/2” to 8” inlet and outlet connections for flows up to 2000 gpm and pressures up to 5000 psi.
For complete product information, request bulletins TBF-2 and TEB-2.
Other Filter Housing products include:
• Integral Duplex Filters
• Standard Housings for High Flow Synthetic Elements
• Standard Non-Code Housings
• Bag Filter Housings
• Seal Gas Duplex Filter Housings
|
|
|
Liquid filters, Water filters
