Conductive level switches

34 companies | 78 products
Filters
  • What’s new?
    Submit

Switch for level detection and dry-run protection

:: Optimised sensor geometry, easy to clean
:: Measures products with dielectric constant > 1.5
:: Maintenance-free
:: Small and compact version OPTISWITCH 6600

The OPTISWITCH 6500 and OPTISWITCH 6600 are hygienic level switches for level detection and dry-run protection for liquids and solids. Through its...

The level switches are used for level identification and dry run security for fluids with advanced stream geometry accurate exchanging point hygienic establishment.The LS 7000 sensors type...

{{productDetail[5863]}}

These probes are perfect for use with corrosive liquids and in plastic vessels. Made with G1 1/2 A parallel or 1 1/2-inch NPG tapered threads plus flanges that...

The Liquipoint T FTW32 by ENDRESS+HAUSER was designed and develop as level switch for multiple point detection in conductive liquids. Made from durable material,...

Liquipoint FTW33 was especially made to be used in n pipes and in storage, mixing and process vessels with or without an agitator. This world class technology...

Endress+Hauser rod probe is specifically created for conductive limit detection of conductive...

{{productDetail[4726]}}

The CoFox® ELT 8 conductivity level switch are designed to control filling...

For conductive media such as water,
waste water, emulsions...

The CoFox® eLT 680 Conductivity level switch, specifically designed for food industry...

{{productDetail[16712]}}

The measurement principle states that the conductivity of a liquid substance may vary greatly. The liquid substance seizes the free DC alternating current between both the electrodes or sometimes...

{{productDetail[7315]}}

This is a multiple rod electrode EL 4 that enjoys a wonderful switch level for liquids that are conductive....

{{productDetail[14882]}}

DWYER Series CLP are Conductivity Level Probe, designed and develop as a low cost, compact solution for a complete level control system. It is durable and highly...

{{productDetail[7228]}}

If users are looking for a conductive filling level switch that detects conductive liquids quickly and reliably, Baumer conductive filling level switch will do the job. It's ideal for filling level measurement...

{{productDetail[7499]}}

The VEGAKON 61 level switch is the ideal device to use for front-flush mounting with conductive...

VEGAKON 66 is a conductive multiple-rod level switch created for conductive...

The EL 1 rod electrode is utilized as a universal level switch specifically for use with conductive liquids....

The Vega EL 4 is a multi-purpose level switch specifically designed for conductive liquids. Its framework features...

The EL 6 is a multiple cable electrode utilized for use with conductive liquids as a universal switch and...

{{productDetail[9136]}}

The 601X series is an economical level switch for fluids and light slurries. It uses the conductive...

{{productDetail[14122]}}

This equipment uses 2 to 5 rods for detecting 1 to 4 levels. It is available with or without an integrated temperature sensor. It can easily control...

{{productDetail[16825]}}

The Conductive Level Switch, manufactured by Jacob - Kabelverschaubungen, is specifically designed for...

{{productDetail[25089]}}

The KOBOLD MESSRING Conductive Level Limit Switches of the NES series are commonly used for level monitoring and pump control of various conductive fluids. All parts are static, non-movable, offering safety when dealing with critical...

{{productDetail[8996]}}

The NES model is a conductive-type level monitor for gauging the level or controlling the pumping of conductive fluids. The principle of operation is thus: on application of a low AC voltage across the container wall...

{{productDetail[9187]}}

Housing: Aluminum alloy, SS304, SS316 available
Probe Insulation Material: PTFE (for ELT101 only); PP (for ELT102~108)
Rode Probe: SS316 standard and option availbel
Working...

{{productDetail[33181]}}

These are cheap level switches available in differential or limit switch versions with adjustable sensitivity and time delay. It comes with high or low fail safe mode.
Wetted parts are made of stainless steel.
It is a compact unit...

NIVOCONT KRK - (Conductive) : LEVEL SWITCHES

GENERAL DESCRIPTION:

Level switches, based on the conductivity principle, can be applied to liquids with conductivity higher than 10 μS/cm. For detecting the level, probes are immersed into the tank. These probes...

{{productDetail[7110]}}

The DRS-303 is manufactured by Simex. It is a liquid sensor type, that is especially designed for conducted liquid presence detection. T parameters...

{{productDetail[37901]}}

The conductive level probes offered by Sitron are designed for conductive liquid level control in reservoirs, tanks, wells, etc. Every model features a compact design that makes them easy...

CN range of Conductive Level switches are efficiently engineered to regulate levels of conductive media. They offer two diverse points of control to which conductive levels can be regulated.

The switches have an optional feature which...

The CN series is manufactured by Sitron, and is a conductive probe that is intended to regulate the level of all conductive medium with up to two different...

The CN2RF Series is a range of conductive level switches from Sitron. The series is engineered to regulate the level of all conductive medium with up to two different points of level...

With up to eight different points of level control, all of the conductive media use the EL Series Conductive level probes designed for this type of control. Accommodating most process requirements,...

{{productDetail[25200]}}

The MBA Dipping electrode EL 1 and EL-TW are used for monitoring water levels. They...

{{productDetail[58208]}}

Food and beverage use
Two Teflon isolated electrodes
For welding in a container
Screw...

{{productDetail[123801]}}

The conductive level switch is manufactured by Uteco, and is made up of...

This series of conductive level sensors is utilized for the detection of conductive limit value. They have a rod diameter of 4mm with 1, 2, 3 or 4 rod electrodes. The length varies between 500 mm (1 rod electrode)...

{{productDetail[69840]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation