Float level switches

95 companies | 617 products
Filters
  • What’s new?
    Submit

For over 25 years it has been hard to imagine fluid level regulation, control and monitoring systems without BERNSTEIN standard float switches. In addition...

Bernstein's Miniature float switches range, available with different lengths if immersion tube, are designed specifically for monitoring product level in cramped spaces to guarantee...

These encapsulated magnetic sensor elements can be placed in groups of four, in various positions, at intervals of 10mm, in the immersion tube...

{{productDetail[15137]}}

With this electromechanical level system, you can reap the benefits of having estimations of levels up to 32m, irregardless of properties with substantial amount. Precision is at ±2.5cm...

This electromechanical level measuring system has a whole lot of features as well as benefits which include accuracy of ±5 cm or ±1 pulse and hence accurate detection of the level, a 0/4 - 20 mA current output compact...

The FTS20 Level Limit Switch provides reliable level limit detection in liquids,...

{{productDetail[4726]}}
{{productDetail[16712]}}

Float switches are designed for simple limit value detection in liquids. These tools float on the liquid surface due to the higher density of the liquid. It is equipped...

Pepperl+Fuchs magnet-operated immersion probes are suitable for clean liquids, for example solvents or oils. Factors such as pressure, density, temperature or the...

This equipment works under the measuring principle where it floats over a vertically guided tube and a permanent magnet that remains fixed in the float switches, consequently the reed contacts resistor chain and acts as a voltage divider, providing...

{{productDetail[7315]}}

LS-3 Series Level Switch is a small size engineered plastics that is ideal for shallow tanks for a high volume and low cost use. It offers a high reliability,...

The LS-7 Series of Side-Mounted Level Switches are manufactured for compact tank and vessel usage....

The LS-77700 Series Level Switch is a bent stem switch that provides the greatest...

The LS-800 Series Level Switch is a U.L recognized hard-working...

Gem Sensors, Inc. is a top producer of flow switch devices, level switch products, level control units as well as pressure...

{{productDetail[19944]}}

The lubricant level switches allows the operator to read the lubricant level. It is a visual indicator in the form of an oil gauge glass that is installed in...

{{productDetail[590]}}

The RSM float switch is perfect for horizontal measurement of many liquid materials. It is also ideal for applications like chemical industry, petrochemical industry,...

{{productDetail[6196]}}

Bulletin 840 is an automatic float switch, which can be used to control circuit-rated devices, as well as to monitor the level of liquids in a sump or tank. As this level increases...

{{productDetail[5071]}}

This is a combo of various devices which include flanged chamber, snap switches, dual station switch and also multi station - level switch. The chamber can work with operating pressure that is about...

Features such as an adjustable deadband combined with direct 2-1/2" threaded or 2-1/2" flange mount make the 500 series a perfect machine for liquid level control in large or small tanks. Customers can choose the material of the machine chamber from cast-iron, cast-steel...

Series F6 & F7 Horizontal Mount Level Switches are designed to mount through the walls of tanks and other vessels. Internally mounted models F6-HPS-11, F6-MHS and F7-SS5 are secured to the wall of the...

The Series 1241/1243/1244 are Flanged Chamber designed and develop by DWYER as a float to help assist in providing reliable level measurement. Housed in...

The most important features integrated into this device are the flanged chamber, the side mount and the adjustable deadband. The products in the 225 series...

{{productDetail[7228]}}

The AKS 38 is an electro-mechanical float switch manufactured by Danfoss. Through its uncomplicated and standard design, it has the ability...

{{productDetail[35691]}}

The Refrigerant Float Switches from the LL series is suited for the control and maintenance of the fluid level. Due to its solid...

{{productDetail[17706]}}

These line of reliable switches detect rising or falling liquid levels in open or...

This line of reliable switches detects rising or falling liquid levels in open...

This line of reliable switches detects rising or falling liquid levels in open or...

{{productDetail[14283]}}

The 101GX is simple and reliable, requiring no calibration. It is easily convertible from "normally open" to "normally closed" output contact.

The Model 101GX is specifically designed for sensing station and dry...

The Model LS Float Switch is a general purpose level-sensing automatic pump or alarm control device. It is reliable and used to measure both water...

{{productDetail[66407]}}

The level switch float dipping available with 1 control points can be used for dirty liquids, water, petroleum, oils, coolants. It tolerates the presence of ferrous metal particles because the float magnet holder and it is integral with the rod.
It provides a total security determined by the fact that the electrical part is totally separated in the side...

The TOR Atex by Riels Instruments is a Float level switch which is designed for the use of most industrial applications. Each of the unit can be used so that it completes the setup of an automatic...

The RL/G1 Level switch immersion uses the magnetic drive float principle for its operation. Its measuring range is up to 3000 mm. The level switch float with one or two control points can be used for petroleum, water, dirty liquids, coolants and oils. It has tolerance to ferrous metal particles thanks to the float...

The RL/G2 is a series of level switch immersion from Riels. The switches in this series are suitable for use with dirty liquids, water, petroleum, oils, and coolants for high temperatures....

The RL/A by Riels Instruments is a Stainless steel magnetic float level switch which is designed for operations having a superior temperature. Each of the unit is made compatible...

{{productDetail[70609]}}

The BIP STOP is a small float switch manufactured by ATMI. It is suitable for use in the automatic control of small pumps.

The float switch offers direct connection to pumps up to 1.5 HP,...

Designed for intensive pump control, the AT 120 is a float level switch that is suitable. Working with high power pumps it is easily connectible directly to the pumps of up to 1.5 HP or it can go through...

The AT 120 HR HY is a heavy duty float level switch from ATMI that is engineered to accommodate aggressive liquids. This device is encased in an HR HY press-vulcanized housing that guarantees a double waterproof protection....

The ATS 165 is described as being robust. It is a cable float level switch and it is made for usage with intense and turbulent liquids that have been extremely agitated. It has a 165 degree big...

The ATS 165 EP is a robust float switch, which is constructed with special components for use in extremely agitated...

{{productDetail[52928]}}

The UNS-MS1/8-BN25 is a miniature magnetic float level switch that is fabricated either...

The UNS-VA1/8-VA27 is a stainless steel float level switch that is mounted through top or through...

The UNS-VA1/4-VA52 series features a Level switch, manufactured by Barksdale Control Products,...

The Barksdale UNS series is an array of magnetic float level switches that can be...

The UNS PA16 Model and PA18 Model are polyamide level switches with 16 mm x 2 mm mounting threads....

{{productDetail[7048]}}

The 701X series is an economical mechanical switch for clean fluids. It can be easily...

{{productDetail[14122]}}

The specially designed float switches for liquids are extensively used for liquid level monitoring and to protect heaters, pumps etc. from drying out. The float switch (Part No. 56672/ 79) with switching...

{{productDetail[19751]}}

These float switches from Ecolevel are engineered with 2 fixed and bi-stable...

The Ecolevel ED is a series of float switches fused with electronic temperature controller. It has dual-fixed bi-stable level contacts in either max/...

{{productDetail[85213]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation