Other flow, pressure and level measurement equipment

204 companies | 623 products
pressure gauge holder
pressure gauge holder
PGH series

The pressure gauge holder engineered by Temperature Technology, is a device intended for the measurements of flow, pressure and level. It is available in various components of pressure gauge holders, and it is enclosed in a powder coated ...

digital vacuum transmitter
digital vacuum transmitter
Smartline

Vacuum range: 0.0005 mbar - 1,200 mbar

Thyracont’s digital Smartline™ transducers with modern combination sensors measure in range of rough to high vacuum, offering outstanding reliability and precision. Beside the classic analogue 0-10 V output, their digital interfaces RS485, ...

See the other products
Thyracont Vacuum Instruments GmbH
Pirani vacuum transmitter
Pirani vacuum transmitter
VSM

Smartline Vacuum transducer Absolute pressure 1000 mbar to 5 x 10-9 mbar (=hPa), 750 Torr to 5 x 10-9 Torr The compact VSM is a digital combination transducer (Pirani/cold cathode) measuring absolute pressure from atmosphere to ...

See the other products
Thyracont Vacuum Instruments GmbH
Pirani vacuum transmitter
Pirani vacuum transmitter
VSH

Vacuum range: 0.0000000005 mbar - 1,000 mbar

Absolute pressure 1000 mbar to 5e-10 mbar (=hPa), 750 Torr to 5e-10 Torr The compact combination gauge VSH (Pirani/hot cathode) measures absolute pressure from atmosphere to ultra-high vacuum. The intelligence of internal microprocessors ...

See the other products
Thyracont Vacuum Instruments GmbH
phase sequence tester
phase sequence tester
TRITEST® easy

For quick and easy phase testing of sockets, distribution boxes, switches and lamps. Locates cable breaks and defective lamps in chains of light and insulated cables. For testing the phase sequence (right/left) and phase balance in ...

digital water meter
digital water meter

Nature friendly, long lifetime No mechanical parts and display Digital large display IP 68 protection class No magnetic influence AMR options, suitable for optical reading Brass and composite material options MID approved and certificated First ...

See the other products
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
dry dial water meter
dry dial water meter

Nature friendly, long lifetime No mechanical parts and display Digital large display IP 68 protection class No magnetic inuence AMR options, suitable for optical reading Brass and composite material options MID approved and certificated Protective ...

See the other products
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
digital water meter
digital water meter

Nature friendly, long lifetime Volumetric measurement No mechanical parts and display Digital large display IP 68 protection, no magnetic inuence Class D AMR options, suitable for optical reading Brass and composite material options MID ...

See the other products
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
current/pressure converter
current/pressure converter
CPC-DX

vacuum regulator
vacuum regulator
SSRA series

Integrated packages destined for screw or vane compressors, with temperature control functions, oil circuit, oil filtration, air oil separation, minimum pressure and check valve. Available in various sizes, to equip compressors with 3 ...

digital measuring instrument
digital measuring instrument
M2.96-145 DMS-M series

Dimensions (WxHxD) 96 x 48 x 89 mm Display range -19999 - 99999 Support points for linearizing the measurement input 30 MIN / MAX value query that can be switched off Operating lock via 4-digit code Membrane keyboard

immersible ultrasonic transducer
immersible ultrasonic transducer
SONDA series

Ideal And Economic Solution for Ultrasonic cleaning! Every single immersible SONDA units work with its own separate high frequency generator.Immersible SONDA units are ready to fix on wall of tank as shown below.

tank cleaning ultrasonic transducer
tank cleaning ultrasonic transducer
CL-TR

Frequency: 22 Hz - 100 Hz

The transducers designed by SinapTec, linked to our generators Inside or Incase, constitute a quality standard with an optimized vibration amplitude and yield. For cleaning purposes, they can be arranged on the various walls of the tank ...

See the other products
SinapTec
immersible ultrasonic transducer
immersible ultrasonic transducer
CL-PI

Immersed transmitters have the advantage of being easy to install, even in a tank which was not intended for that at the origin: they are simply placed or fixed in the tank and have the same cleaning effect as the transducers fixed directly ...

See the other products
SinapTec
plate ultrasonic transducer
plate ultrasonic transducer
CL-FL

PLATE TYPE TRANSDUCER FOR TANKS Linked to our generators Inside or Incase, the transducer plates are mounted on the bottom or the side walls of the ultrasonic cleaning tank which allows a space saving inside the tank while still remaining ...

See the other products
SinapTec
air flow Pitot tube
air flow Pitot tube
PI-4

High accuracy Pitot tube with built-in electronics delivering a signal output of 0 to 5 V. This pitot tube sensor is used for measuring air speed by integrating dynamic and static pressures. This measurement combined with load measurement ...

air flow Pitot tube
air flow Pitot tube
PI-6

High accuracy Pitot tube sensor with built-in electronics delivering an output signal of 0 to 5 V. This pitot tube sensor is used for measuring air speed by integrating dynamic and static pressures. This measurement combined with load ...

Pitot tube
Pitot tube
Yaw Pitot S/T

Introducing the Texense YAW Pitot sensor with remote tube combining static, differential, yaw angle & board temperature in a compact lightweight housing. • Sensor & tube packaged separately to aid Installation • High accuracy ...

calibrated leak
calibrated leak
MASTER

Leak Masters are the ideal operational tools to check the testing systems. Each Leak Master guarantees a certified leak rate at a precisely defined testing pressure. To answer to all the quality control needs, the Leak Masters are ...

suction pipe with float level switch
suction pipe with float level switch

The Suction Lances have the following Features: - G1 1/2" bis G2", screw cap, plug in flange, others on request - PVC- and Silicone-cable - ABS-enclosure - upto 3 NO, NC, 2 change over - overall length: upto 1.500 mm - Temperature ...

hydraulic deadweight tester
hydraulic deadweight tester
BH4 series

Pressure: 1 bar - 5,000 bar

To be specified when ordering : - Choice of the unit of the principal set of weights: Bar or PSI - Standard gravity (9.80665m/s²) or special gravity (indicate the desired value) Options available : - reference OP237-200 : fine increment ...

See the other products
AREMECA
vacuum regulator without display
vacuum regulator without display
V-800 series

Vacuum range: 0 psi - 14.7346 psi

U.S. Patent No. 5,358,004 The V-800 Series vacuum regulators are designed for applications requiring high precision in a miniature package. Hysteresis free adjustments are made through a non-rising stem. Available with an attractive ...

vacuum regulator without display
vacuum regulator without display
V-900 series

Vacuum range: 0 psi - 14.7346 psi

The V-900 Series vacuum regulators are designed for applications requiring high precision in a miniature package. Hysteresis free adjustments are made through a non-rising stem. Available with an attractive knob, or plain, allowing installation ...

analog vacuum regulator
analog vacuum regulator
Type 480

The Type 480V vacuum regulator provides precise control up to full vacuum. The push type locking knob provides smooth adjustment. The standard bracket and integral panel nut allows for versatile installation options. Features • ...

vacuum regulator
vacuum regulator
GH20VT

Conoflow's GH20VT - 316 Stainless Steel Low Pressure Regulator is designed to accurately regulate the sub-atmospheric pressure of a vessel being evacuated. These units are especially suited for laboratory work and test stands for simulation ...

calibrated leak
calibrated leak
FCO99

Very easy to use Wide range of pressures / flows available No moving parts Small internal volume Our series of calibrated leaks are designed to connect to production line leak detectors as well as flow-based leak detectors, giving ...

stainless steel Pitot tube
stainless steel Pitot tube
FCO68

FCO68 Averaging Pitot Static Tube Sturdy, stainless steel construction Available with welded flange or stuffing box and locking gland Custom built to fit your pipe or duct Various diameters available from ¼ inch to 1 inch. This ...

air flow Pitot tube
air flow Pitot tube
FCO65

Classic Prandtl design for most duct sizes. Stainless steel construction Suitable for temperatures up to 500 °C. Versions for installation or hand-held use Our Pitot tubes have a classical design with a hemispherical nose and bent ...

calibrated leak
calibrated leak
M0710

M0710 is the new ForTest® leak –certificated series for verifying leaks during automated tests. The instrument has been patented european wide. Employees that use leak identification instruments need to know the calibration of those ...

calibrated leak
calibrated leak
M0730

M0730 is the new ForTest® leak –certificated series for verifying leaks during automated tests. The instrument has been patented european wide. Employees that use leak identification instruments need to know the calibration of those ...

temperature measuring instrument
temperature measuring instrument
TES-116 series

• Auto Alarm(High/ Low Setting). • Triple LCD displays Barometnc pressure, • Temperature, and Relative humidity. • Dew point and Wet bulb temperature reading. • Absolute humidity, Mixing ratio and Enthalpy reading. • Water vapor ...

cooling tower for pressure gauge
cooling tower for pressure gauge
V191

We recommend the usage of a cooling element in case of higher process temperatures at the diaphragm seal with direct mounted measuring instrument. The cooling element shall keep the higher temperatures away from the measuring instrument. ...

temperature measuring instrument
temperature measuring instrument
nSens Mobile

Use your Android smartphone with the USB smart handle and the Novasina climate sensor to carry out accurate and reliable climate measurements. Check out the bundles to get sensor together with the smarthandle. • Realtime reading ...

air flow Pitot tube
air flow Pitot tube
VAP³®/SA

The uniquely designed VAP insertion style pitot is specially designed for use within any air flow duct. The pitot is inserted into an air stream in order to produce an accurate differential pressure output that enables precise air flow ...

heated Pitot tube
heated Pitot tube
VAP³®

The VAP³ by Eastern Instruments is a heated pilot tube which comes with an integral heating element that enables it to deliver an accurate differential pressure even when the temperature of the air drops below freezing. This unit can ...

differential deadweight tester
differential deadweight tester
DOS series

Pressure: 0 bar - 2,000 bar

STIKO manufactures deadweight testers for ranges up to 2000 bar, for industrial (accuracy 0,015% of reading) or laboratory use (accuracy 0,01% or 0,008% of reading). The deadweight tester with 0,015% accuracy (DOS0015) can optionally ...

pressure measuring instrument
pressure measuring instrument
0.1 - 30 m/s | Anemomaster Professional

The Anemomaster Professional by Kanomax USA is a Multi-function meter designed for measuring pressure, air velocity and air flow. As a guarantee for its durability, it comes with a 2-year warranty offered by the manufacturer. The unit ...

pressure measuring instrument
pressure measuring instrument
TireCheck

– For checking tyre pressure in psi and bar – Digital gauge for checking tread depth – In the heating installation measuring the pressure at reservoirs – Auto Power-off: the device switches off automatically when left idle for 90 seconds. ...

exhibit your products

& reach your clients in one place, all year round

Exhibit with us