Thermal mass flow meters and flow controllers

54 companies | 271 products
Filters
  • What’s new?
thermal mass flow meter / for gases - 0 - 300 L/min | 4040

MASS FLOWMETERS FOR LABORATORY AND GENERAL PURPOSE APPLICATIONS
The TSI Model 4040 Mass Flowmeter can be used for a multitude of gas flow measurement applications. Whether measuring gas flows in a laboratory or manufacturing setting, TSI general-purpose mass flowmeters provide...

thermal mass flow meter / air / for pump calibration - 2.5 - 300 L/min | 4046

The 4046 is manufactured by TSI, and is a primary calibrator that has a range of 2.5 to 300 lpm. It is small, portable, and battery operated unit that is lightweight...

{{productDetail[22441]}}
thermal mass flow controller / film - red-y smart meter GSM

Gas Flow Meters with standard digital and analog output

The thermal mass flow meters and controllers of the smart series are especially well suited for measurement...

thermal mass flow controller / digital / with analog output - red-y smart series

Gas Flow Controllers with integrated regulator

The thermal mass flow meters and controllers of the smart series are especially well suited for measurement and control...

thermal mass flow meter / for gases - red-y compact regulator GCR

Gas Flow Regulators & Switches with needle valve with high/low alarm

Alongside numerous other possible uses, the red-y compact becomes an affordable alternative to the traditional variable area flowmeters.
In addition to its independence...

thermal mass flow meter / direct reading - GC series

Gas Flow Meters with on-the-spot direct reading

This red-y compact has a number uses including becoming an affordable alternative to the traditional variable area flowmeters. With the independence from the mains supply, it...

thermal mass flow meter / explosion-proof - red-y industrial series

The "red-y industrial series" thermal mass flow meters and controllers are ATEX certified (Category 3 / Zone 2 & 22) and available in IP67 and NEMA 6 versions (for protection...

{{productDetail[17605]}}
thermal mass flow meter / for gases - CMS SERIES

MCF SERIES
Dedicated air/nitrogen mass flowmeter to save energy when using compressed air or nitrogen. Low cost, high performance, Compact and vibration resistant

CMG SERIES
The CMG series is a robust yet compact gas mass flow monitor for Gas/Air ratio control and Energy management on individual burners powered...

thermal mass flow controller / digital - MQV SERIES

High- performance and high-speed digital mass flow controller equipped with Yamatake “µFlow” (Microflow) sensor, to actuate a proportioning valve...

{{productDetail[18885]}}
thermal mass flow meter / for gases / insertion - 0.2 - 200 m/s | TA 10

The principle of measurement is based on heat transport from an electrically heated body in ambient air dependent on the relative velocity between both.

Thermal flow...

thermal mass flow meter / for gases / insertion - 0.2 - 200 m/s | TA 10

- analog output: 4 ... 20 mA

- pulse output (example: 1 pulse = 1 m³)

- power supply: 24 VDC

- serial interface RS232 for configuring and transmission of data

-variable time constant: 1 ... 99 s

-...

{{productDetail[7174]}}
thermal mass flow meter / for gases - max. 1 000 l/min | MTF-4000 series

The MTF-4000 series is designed for a wide array of applications including those for the semiconductor and bio-medical industries. Low cost and high performance...

thermal mass flow controller / digital - 0 - 50 NLPM | MTHF series

The MTHF Series comes with or without an LCD display, and all models come with linear 0-5 V DC and 4-20 mA output. The...

thermal mass flow controller / digital - 1/2

The MTLFC Series comes with or without an LCD display, and all models come with linear 0-5 V DC and 4-20 mA output. The MTLFC Series measures the mass flow rate of gases in 4 ranges from 0-250 NmLPM to 0-500 NmLPM as range table.

Standard Specifications
Wetted...

thermal mass flow meter / for small quantity - 0 - 200 NmLPM | MTMF series

The MTMF Series comes with or without an LCD display, and...

thermal mass flow meter / digital - 1 500 NLPM | MTMF series

The MTMF Series comes with or without an LCD display, and...

{{productDetail[13599]}}
thermal mass flow meter / digital - 1 500 NLPM | MTMF series

Featuring: Mass Flow Control with Mass Flow Controllers Mass Flow Meters and Flow Verifiers, Advanced Materials Delivery, and Integrated Solutions and Subsystems

Accurate, reliable gas flow delivery and...

thermal mass flow controller / film - 179A Mass-Flo®

The 179A MASS-FLO® is an analog/digital, metal-sealed mass flow meter. It is made to measure the flow of gases in a wide...

thermal mass flow meter / for small quantity - M330B series

Low Pressure Drop, Analog, Metal-sealed Mass Flow Controller
photo - M330 B Low Pressure Drop, Analog, Metal-sealed Mass Flow Controller

The MKS Instruments M330B Low Pressure Drop Thermal Mass Flow Controller...

thermal mass flow controller / liquid / film - M330H, M330AH

MKS Instruments has been at the forefront of developing instrumentation for the delivery of low vapor pressure materials....

thermal mass flow meter / cost-effective - M100B Mass-Flo®

The M100B Mass-Flo® Series of Cost-effective Thermal Mass Flow Meter, manufactured by MKS Instruments,...

{{productDetail[7020]}}
thermal mass flow meter / for gases - max. 200 l/min | CMS

The CMS is a highly reliable gas mass flow meter that uses Yamatake's µF (MicroFlow) sensor...

thermal mass flow meter / for gases - 1/2 - 2

Gas Flow Meter: CMG Series Gas Flow Monitor with models for natural gas and compressed air are an efficient way to monitor...

thermal mass flow meter / digital - MCF

The MCF is a mass flow meter specifically for compressed air or nitrogen use. It incorporates Yamatake's...

{{productDetail[15975]}}
thermal mass flow meter / digital - 0 - 1000 l/h | DF-210A

The DF-210 measures instantaneous flow and cumulative flow in use with FP series fuel flow detectors.

Applicable Flow Detectors FP...

thermal mass flow meter / digital - 0 - 10 V | DF-211A

DF-211A - OnBoard Extended Unit
The...

{{productDetail[15240]}}
thermal mass flow meter / for gases - OFS-EF series

Rapid response.
NIST traceable
Good for measuring non-aggressive gases such is air, nitrogen, argon,...

{{productDetail[12619]}}
thermal mass flow meter / for gases / insertion - 12 - 60

The RNG Series meter is an insertion-style vortex shedding ow meter designed to offer high accuracy measurements over an extremely...

{{productDetail[34584]}}
thermal mass flow meter - MFM 2020

The MFM 2020 is a compact mass flow meter that is equipped with digital interface and...

thermal mass flow meter - MFM 2021

The advanced mass flow meter MFM 2021 includes an additional high precision PID...

thermal mass flow controller - MFC 2022

The MCF 2022 Series, manufactured by Axetris®, is a high performance thermal mass flow...

thermal mass flow meter - MFM 2100 Series

A stand-alone mass flow meter with a complete housing that provides environmental and electrical protection to the...

thermal mass flow controller - MFC 2100 Series

The MFC 2100 Series by Axetris consists of thermal mass flow controllers equipped...

{{productDetail[106177]}}
thermal mass flow meter / for gases - HLX 776

The HLX776 Series manufactured by DIGITRON, is an insertion mass flow meter that is made according to the mass flow measurement. This device is suitable for flow measurements of the shrinked...

thermal mass flow controller / for gases - HLX 772

The HLX772 is a thermal mass flow meter for compressed air and gases.
Irrespective of pressure and temperature, the HLX772 flow meter registers mass flow, volumetric flow or standard flow. The flow meter can be used effectively to measure the consumption...

{{productDetail[20821]}}
thermal mass flow controller / for gases - HLX 772

The MCQ Instruments “Sensor module” can be used both for the measure and for the control of mass flow.
It has been conceived for all the customers that...

{{productDetail[61795]}}
thermal mass flow meter / digital - 10 - 150 l/min, 3.5 bar | In Line Diesel

Partial [DIGITS]: 5
Totalizer [DIGITS]: 5 + 3
Unit of measure: liters, gallons, pints, quarts
...

thermal mass flow meter / digital - 10 - 150 l/min | In Line Food

The In Line Diesel model, manufactured by Adam Pumps, is a digital thermal mass flow meter...

thermal mass flow meter / liquid / digital - 10 - 150 l/min | In Line - urea

Adam Pumps manufactures the digital thermal mass flow meter. This device displays 5 partial digits that can...

thermal mass flow meter / digital - 10 - 150 l/min | Di Flow

The Di Flow is suitable for use with diesel, but not with alcohol, gas,...

{{productDetail[85241]}}
thermal mass flow meter / for gases / insertion - 5 V, -40 °C ... +150 °C | truckflow

The truckflow is a gas mass flow pitot tube that is ideal for use in gauging has mass which is needed for the air management...

{{productDetail[39294]}}
thermal mass flow controller / for gases / digital - max. 250 Nl/min, 16 bar | flox[on] B

The flox[on]B by FCTechnik is a digital thermal mass flow controller designed for gases. For this specific...

thermal mass flow controller / for gases / digital - max. 1650 Nl/min, 16 bar | flox[on] S

The Flox[on] S is manufactured by FCTechnik, and is a digital thermal mass flow controller for gases....

thermal mass flow controller / for gases / digital - 2 - 1650 Nl/min | flox[on] S500

The Flox[on] S500 is manufactured by FCTechnik, and is a digital thermal mass flow controller for gases....

thermal mass flow controller / for gases / digital - 1200 - 7000 Nl/min | flox[on] J

With its adjustment control system, FC Technik's flox[on] J Mass Flow Controller (MFC) for gases becomes resistant to pressure...

{{productDetail[118821]}}
thermal mass flow meter / film - 3810DS series

KOFLOC 3810DS
The KOFLOC Mass Flow Meter MODEL 3810DS SERIES is a low-cost mass flowmeter with a digital display; based on the time-tested MODEL 3810 SERIES mass flow meter. Compact and lightweight, it requires no calibration and comes with 2-point alarm output. When used with the optional precision needle valve, it can serve as a low-cost alternative...

thermal mass flow controller / film - 3660 series

KOFLOC 3660, 3665
The KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES is a low-cost, general-purpose gas mass flow controller. The differentiating factor of the MODEL 3660 SERIES is its numerous variants and options, a room for customization at affordable cost. It has gained wide acceptance and solid reputation for its flexibility. MODEL 3660 SERIES is now in use as a component for Sputter...

thermal mass flow controller - 5400 series

The 5400 series is a thermal metal-sealed mass flow regulator that is characterized by its high efficiency and performance rate and optimum reliability. It is encased in a leak-free and non-welded housing...

thermal mass flow controller / for gases - 3200 series

The Model 3200 Series is a range of high-grade mass flow controller from Kofloc. The controller features an advance construction from the 3910 series. It is widely used for various operations like manufacturing...

thermal mass flow meter / for gases - D7100 series

Kofloc presents 7100NL series of micro gas flow meters. The series includes models 7100NL and 7100S. The mass flowmeters are economical and low-power with a fast response of 70m or less. They are useful for monitoring and control of flow,...

{{productDetail[54093]}}
thermal mass flow meter / for gases - max. 8 000 l/min

This is a thermal mass flowmeter for energy conservation management allowing the measurement of utility gases including air and nitrogen in a wide range. With the function of Yen converted indication, the flowmeter...

thermal mass flow meter / for gases - 25 - 80 mm, max. 450 m3/h

Oval's thermal mass flowmeter is ideal for consumption management of city gas in addition to air and nitrogen. It is an energy saver...

thermal mass flow meter / for gases - 65 - 80 mm, max. 3 640 m3/h

The MFT-B series from OVAL is a mass flowmeter for gas service that is especially designed to be highly portable and can be used for in-line applications....

{{productDetail[113801]}}
thermal mass flow controller / digital - 30 - 250 slm | AFC 202D, AFM 302D

For high flow from 30 slm up to 250 slm, the highest performances of digital P.C.B. combined with
elastomeric seals on the Qualiflow Therm AFC 202D and...

thermal mass flow controller / digital - max. 25 slm | AFC 50D, AFM 55D

The highest performances of digital P.C.B. combined with elastomeric seals on the Qualiflow Therm AFC 50 D and AFM 55 D :
- Full potential...

thermal mass flow controller / digital - max. 30 slm | AFC 80MD, AFM 85MD

The highest performances combined on the Qualiflow Therm AFC 80 MD and AFM 85 MD with :
- Regular winding flow sensor.
-...

thermal mass flow controller / digital - max. 5 slm | MC-3000

New generation piezoelectric valve.
Full potential of digital technology and optimized digital
PID control.
Compatible to...

thermal mass flow controller / digital - max. 5 slm | MC-4000

High performance 1’’1/8 digital MFC.
New generation piezoelectric valve.
Full potential of digital technology and optimized digital
PID...

{{productDetail[8644]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation