{{#pushedProductsPlacement4.length}} {{#each pushedProductsPlacement4}}
{{product.defLight}}
{{product.productLabel}}
{{product.model}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}

{{{product.idpText}}}

{{#if company.requestButtonsVisibility.requestButtonQuestion == "ACTIVE"}}
{{elseif company.requestButtonsVisibility.requestButtonWhereToBuy == "ACTIVE"}}
{{/if}}
{{productPushLabel}}
{{#if product.innovationType}}
{{else}} {{#if product.newProduct}}
{{/if}} {{/if}} {{#if product.hasVideo}}
{{/if}}
{{/each}} {{/pushedProductsPlacement4.length}}
{{#pushedProductsPlacement5.length}} {{#each pushedProductsPlacement5}}
{{product.defLight}}
{{product.productLabel}}
{{product.model}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}

{{{product.idpText}}}

{{#if company.requestButtonsVisibility.requestButtonQuestion == "ACTIVE"}}
{{elseif company.requestButtonsVisibility.requestButtonWhereToBuy == "ACTIVE"}}
{{/if}}
{{productPushLabel}}
{{#if product.innovationType}}
{{else}} {{#if product.newProduct}}
{{/if}} {{/if}} {{#if product.hasVideo}}
{{/if}}
{{/each}} {{/pushedProductsPlacement5.length}}
turbine flow meter / for liquids / in-line / with display
turbine flow meter
FTB790 series

Process pressure: 103, 207 bar
Process temperature: -40 °C - 121 °C

The FTB790 turbine meter series are built with microprocessor-based technologies that give durable and precise fluid measurements including total and rate indicators. Clearly displayed on a 6-digit liquid crystal display with two-point ...

turbine flow meter / for chemicals / in-line / digital
turbine flow meter
FTB300 series

Process pressure: 10, 9 bar
Process temperature: 54, 93 °C
Volumetric flow rate: 0 l/min - 7 l/min

The FTB300 series digital paddle wheels are cost-efficient solutions for applications with low flow rates. They are equipped with infra-red light beam technology. The connections available are 1/4 FNPT, 1/8 FNPT and 3/8 inch OD tube fittings. ...

impeller flow meter / for fluids / insertion / plastic
impeller flow meter
FPB1400 series

Process pressure: 10 bar
Process temperature: 60 °C

The FPB1400 paddlewheel flowmeter is easy to mount, install and operate. Fluid flowing through the unit triggers the paddlewheel spinning and magnets in the paddle produce electrical pulses as they spin past a sensor. Frequency in the ...

turbine flow meter / for water / in-line
turbine flow meter
FTB1300 series

Process pressure: 345 bar
Process temperature: -40 °C - 85 °C
Volumetric flow rate: 0.3 l/min - 757 l/min

The FTB-1300 series of flow meters is designed to measure water with care. It has a 316 stainless steel body and a tungsten carbide bearing. This is accurate and will work without risking a great deal of pressure loss. Designed with ...

impeller flow meter / for compressed air / clamp-on / digital
impeller flow meter
30 - 140 psig

The Digital Flowmeter from Exair offers a convenient way to monitor compressed air consumption and waste. This device is equipped with a digital display which shows the accurate amount of air measurement that has been used. It is designed ...

turbine flow meter / for liquids
turbine flow meter
17.007

Process pressure: 0.2 bar - 10 bar
Process temperature: 0 °C - 60 °C
Volumetric flow rate: 0 m³/h - 30 m³/h

The combination of a flow meter and a solenoid valve in one compact unit enables, with suitable electronics, the accurate metering of a liquid together with the ability to interrupt the flow. A servo controlled valve avoids water hammer ...

turbine flow meter / for liquids / in-line / high-accuracy
turbine flow meter
17.007.-

Process pressure: 0.2 bar - 10 bar
Process temperature: 60 °C
Volumetric flow rate: 30 l/min

Flow meter turbine with shut off device is a combination of a flow meter and a solenoid valve that automatically delivers a preset quantity of liquids and then shut itself off. This one compact unit is designed to meter accurately a preset ...

impeller flow meter / for liquids / in-line / digital
impeller flow meter
FMT 50 PP series

Process pressure: 4 bar
Volumetric flow rate: 5 l/min - 50 l/min

The Type FMT 50 PP liquid meter features an interlocked wheel impeller within the measuring chamber, and is designed for 5-50 l/min flowrate for liquids with up to 40 mPas (cP) viscosity. This use-friendly meter has a 5-digit LCD display ...

turbine flow meter / for steam / for gas / for liquids
turbine flow meter
RIM10 series

Process pressure: 137.8 bar
Process temperature: 400 °C

The RIM10 rotor insertion flow meter is highly recommended for steam, gas and liquid stream that is directly installed to operational pipelines. To continue, through the use of standard hot-tapping techniques, this top of the line device ...

turbine flow meter / for water / insertion / aluminum
turbine flow meter
0.11 - 7 000 m³/h | VTR series

impeller flow meter / for fuel / in-line
impeller flow meter
max. 400 l/h | FUEL-VIEW series

This dense fuel flow meter is used for monitoring fuel consumption. The FUEL-VIEW series of fuel flow meters delivers compact, featherweight in addition to a cost-effective solution for the measurement of fuel consumption along with operating ...

impeller flow meter / for fuel / for oil / in-line
impeller flow meter
DFM-50A-K

Process pressure: 2 bar - 25 bar
Process temperature: -40 °C - 80 °C
Volumetric flow rate: 1 l/h - 50 l/h

The 50 L/H Fuel Flow Meter is a one of a kind product offered by Fuel View. It boasts of it's compact and lightweight design accompanied by economical power consumption. It also features fuel flow even if the measuring ring has stopped ...

See the other products
Mass Flow ONLINE BV
impeller flow meter / for fuel / for oil / in-line
impeller flow meter
DFM-50C

Process pressure: 2 bar - 25 bar
Process temperature: -20 °C - 60 °C
Volumetric flow rate: 1 l/h - 50 l/h

This 50 L/H fuel flow meter has the following extended functionality: it has an engine operating time, an engine working time in both "ïdling and optimal" mode and consumption in overload mode, and a measuring chamber temperature. The ...

See the other products
Mass Flow ONLINE BV
impeller flow meter / for fuel / for oil / insertion
impeller flow meter
DFM-50C-K

Process pressure: 2 bar - 25 bar
Process temperature: -20 °C - 60 °C
Volumetric flow rate: 1 l/h - 50 l/h

This 50 L/H Fuel Flow Meter provides indication of engine operating time, engine working time in "idling" mode and engine working time in "optimal" mode, and measures chamber temperature. It has a pulse output for remote readout, and ...

See the other products
Mass Flow ONLINE BV
impeller flow meter / for fuel / in-line / aluminum
impeller flow meter
DFM-100A-K

Process pressure: 2 bar - 25 bar
Process temperature: -40 °C - 80 °C
Volumetric flow rate: 2 l/h - 100 l/h

Pulse output for remote readout Led indication for actual flow Strong metal moulded case Flow meter design provides a fuel flow even when measuring ring has stopped Ease of mounting and operation Mounting in any position Built-in fuel ...

See the other products
Mass Flow ONLINE BV
impeller flow meter / for fuel / for oil / in-line
impeller flow meter
DFM-100C

Process pressure: 2 bar - 25 bar
Process temperature: -20 °C - 60 °C
Volumetric flow rate: 2 l/h - 100 l/h

Indication in: - Actual Flow(l/h) - Consumption in normal mode (l) - Consumption in overflow mode (l) Strong metal moulded case Flow meter design provides a fuel flow even when measuring ring has stopped Ease ...

See the other products
Mass Flow ONLINE BV
turbine flow meter / metal tube / for liquids / in-line
turbine flow meter
TM series

Process pressure: 16, 40 bar
Process temperature: -50 °C - 170 °C
Volumetric flow rate: 300 m³/h - 650 m³/h

Suitable for flow measurement of liquids or volume totalizer, with several options for the electronic converters. Suitable for all flow directions with good performance with clean and low viscosity liquids. Application areas All kind ...

turbine flow meter / for gas / in-line / aluminum
turbine flow meter
K24 ATEX/IECEx

Volumetric flow rate: 0 l/min - 120 l/min

New meter for accurate measuring of the quantity dispensed within private applications (gasoline, kerosene, diesel), meets the ATEX/IECEx requirements, related to the use of materials in potentially explosive atmospheres. Digital ow ...

turbine flow meter / in-line / aluminum / with LCD display
turbine flow meter
K24

Volumetric flow rate: 0 l/min - 120 l/min

The K24 Flow Meter is made of aluminum and it has reinforced polyamide for plastic version and it has polypropylene turbine. It has digital flow meters for low-viscosity liquids. The flow meter is very easy to deploy, in line or at the ...

turbine flow meter / for water / in-line / compact
turbine flow meter
K24 Urea, TURBINOX

Volumetric flow rate: 0 l/min - 100 l/min

TURBINOX INLINE PULSE METER,an enduring device with S.S body and a pulser display to connect to external receiver & K24 METER,provided with compact easy readable display are user friendly,accurate devices.K24-METER can be installed either ...

impeller flow meter / for liquids / plastic / programmable
impeller flow meter
PWE

Process pressure: 0 Pa - 10 Pa
Process temperature: -10 °C - 70 °C
Volumetric flow rate: 0 l/min - 132.5 l/min

Aalborg® equipment with multiple criterion PWE digitized paddle wheel flow-meters which provide economic solutions to medium flow liquid applications. Password safety remove unauthorized resetting and alterations made to the unit. The ...

impeller flow meter / for liquids / vertical-mount / PP
impeller flow meter
PWM

Process pressure: 0 Pa - 10 Pa
Process temperature: 0 °C - 70 °C

The PWM paddlewheel meters are used in measuring the flow of liquid. The device consist of jewel bearings which allows low minimum flow rates. It consist of one moving part. The components of the device can be installed and operated easily. ...

impeller flow meter / for liquids / insertion / PP
impeller flow meter
HF100

Process temperature: 70 °C
Volumetric flow rate: 20 l/h - 4200 l/h

The HF 100 Paddle Wheel Liquid Flow Meter from New Flow is powered by a power sources that is rated from 3.8 V to 30 V DC. It is fitted with a sink output and a Vitron O-ring. The body of the unit is made from polypropylene. Moreover, ...

impeller flow meter / for liquids / insertion / PTFE
impeller flow meter
HF200

Process temperature: 70 °C
Volumetric flow rate: 1 m³/h - 10 m³/h

The HF200 is manufactured by New-Flow USA, and is a paddle wheel liquid flow meter with a connection size of standard 1½" NPT female. It has power rating of 3.8 V to 30 V DC with NPN sink output. The body is made up of Polypropylene, ...

turbine flow meter / for oil / in-line / bi-directional
turbine flow meter
PPC-04/12-SFM, PPC-CAN-SFM

The PPC-04/12-SFM and PPC-CAN-SFM series from STAUFF is a set of flow turbines that are especially housed within aluminum coated with black anodine for increased durability. The PPC-04/12-SFM model is an analog flow turbine that has ...

turbine flow meter / for fuel / in-line / with counting function
turbine flow meter
DOT

Process pressure: 0 bar - 250 bar
Process temperature: 0 °C - 120 °C
Volumetric flow rate: 0.1 m³/h - 7000 m³/h

The DOT Model of Turbine Fuel Flow Meter with Counter, manufactured by Kobold Instrumentation, consists of a hectically shaped turbine rotor supported in two tungsten carbide bearings. It can generate with maximum pressure of 250 bar, ...

flow meter / Pelton wheel turbine / for water / in-line / with analog output
flow meter / Pelton wheel turbine
DPE-F

Process pressure: 0 bar - 40 bar
Process temperature: 0 °C - 80 °C
Volumetric flow rate: 7 l/min - 750 l/min

The In-line Pelton Wheel Turbine Flow Meter Model DPE-F is utilized for measuring and observing fluids. It operates according to the blade wheel principle. The six vane blade wheel is maintained axially in a high-quality sapphire bearing. ...

overhead flow meter / for liquids / in metering tube / compact
overhead flow meter
DPL-F

Process pressure: 0 bar - 10 bar
Process temperature: 0 °C - 70 °C
Volumetric flow rate: 0 l/min - 25 l/min

The DPL-F Series of In-Line Vane-Wheel Flow Meter, manufactured by Kobold Instrumentation, is mainly used in several areas of utilization such as in minimal viscosity fluids, non-conductive liquids, and beverage industry. This flow meter ...

impeller flow meter / for liquids / in-line / with analog output
impeller flow meter
DRH AUF

Process pressure: 0 bar - 100 bar
Process temperature: 0 °C - 100 °C
Volumetric flow rate: 0.2 l/min - 50 l/min

DRH model is a type of rotating vane flow meter. This device is used to measure and monitor low viscous liquids. The unit operates in accordance to the rotating vane principle. It consists of a magnet that can fit in the vane and ...

turbine flow meter / for liquids / insertion / high-accuracy
turbine flow meter
PEL-L

Process pressure: 5 bar - 345 bar
Process temperature: 70 °C - 135 °C
Volumetric flow rate: 0 l/min - 28 l/min

KOBOLD High precision turbine wheel flow meter are used for the measurement, monitoring, metering and dosing of liquids. The model PEL flow meter works on the turbine wheel principle. The heart of this device is a Pelton turbine supported ...

turbine flow meter / for liquids / in-line
turbine flow meter
VTH 15

Process pressure: 10 bar
Process temperature: 85 °C
Volumetric flow rate: 2 l/min - 40 l/min

The SIKA Type VTH 15 Insertion turbines provide a reliable method for measuring flow, and water dosing for water based mixtures, making them well suited for various applications such as blocks and valves in machine and plant engineering ...

See the other products
SIKA
turbine flow meter / for water / in-line / for water treatment
turbine flow meter
VTH 20

Process pressure: 10 bar
Process temperature: 60 °C
Volumetric flow rate: 1 l/min - 42 l/min

The VTH 20 series features an Insertion Turbine Flow Meter, manufactured by Sika, is mainly used for flow measurement and dosage in water and water mixtures. This tool is also applicable for several utilization such as in blocks and valves ...

See the other products
SIKA
turbine flow meter / for water / in-line / for water treatment
turbine flow meter
VTH 25

Process pressure: 10 bar
Process temperature: 85 °C
Volumetric flow rate: 4 l/min - 160 l/min

The Push-In Turbine Flow Sensor VTH 25 by SIKA is made especially to provide an excellent quality functionality and performance for very specific purposes. The flow sensor is ideally used for flow measurement and dosage in several water ...

See the other products
SIKA
turbine flow meter / for liquids / in-line / OEM
turbine flow meter
VTY 10 MS-30

Process pressure: 10 bar
Process temperature: 95 °C
Volumetric flow rate: 1 l/min - 30 l/min

SIKA Turbine flow sensor Type VTY 10 MS-30 are specifically designed for potable water applications. The unit is loaded with features like various fitting positions facility, independent from flow straighteners, insensitive against water ...

See the other products
SIKA
turbine flow meter / for liquids / in-line / stainless steel
turbine flow meter
VTR 1010, 1050

Process pressure: 250 bar
Process temperature: 150 °C
Volumetric flow rate: 0 m³/h - 68 m³/h

SIKA Turbine flow sensor Type VTR 1010 to 1050 series of turbine flow sensors in stainless steel are used in many areas due to their robust construction and high accuracy. The unit is loaded with features like pick-up mounting facility, ...

See the other products
SIKA
water counter / positive displacement / direct-reading / adjustable dial
water counter
DN 15 - 20, PN 16, 2.5 - 4 m³/h | 1701 series

The 1701 single jet wheel bulk water meters are made with 2 models. The MID R 100 is made for horizontal applications with a horizontal dial, and the MID R 50 is for vertical or horizontal position with an upright dial. Both units are ...

See the other products
SFERACO
water counter / positive displacement / direct-reading / wet dial
water counter
DN 15 - 50, PN 16, 1.5 - 15 m³/h | 1705 series

The 1705 series is a multi-jet vane wheel water meter with a wet dial manufactured by Sferaco. The B Class works in horizontal position while the A Class works in both vertical and horizontal positions with vertical dial. Both classes ...

See the other products
SFERACO
water counter / positive displacement / wet dial / multi-jet vane wheel
water counter
DN 15 - 50, PN 16, 2.5 - 25 m³/h | 1715 series

The 1715 series from Sferaco, is a multi-jet vane wheel water meter that features bore from 15 up 50. It has a maximum pressure of up to 16 bar. The temperature ranges from 0°C to + 30°C. The water meter unit is made of brass body and ...

See the other products
SFERACO
water counter / positive displacement / direct-reading / dry dial
water counter
DN 15 - 20, PN 16, 1.5 - 2.5 m³/h | 1721 series

The 1721 series is a single jet vane wheel water meter which is used in most residential and industrial application. For this specific model, it has a bore size of 15 and 20. For its operating temperature, it has a minimum of 0°C and ...

See the other products
SFERACO
water counter / positive displacement / adjustable dial / dry dial
water counter
DN 15 - 20, PN 16, 2.5 - 4 m³/h | 1741 series

The 1741 series by Sferaco is a single jet vane wheel water meter which is used in most residential and industrial application. For this specific model it has a bore size of 15 and 20. For, its operating temperature, it has a minimum ...

See the other products
SFERACO
impeller flow meter / for liquids / in-line
impeller flow meter
DRH AUF

The DRH AUF Series, manufactured by Kbold®, is a rotating vane flow meter for liquids that utilizes the minimal viscous liquids in measuring and monitoring. Its function is in accordance with the principle of the rotating vane. Through ...

overhead flow meter / for liquids / in metering tube
overhead flow meter
DPL-F

The DPL from Kobold, is a flow meter suitable for low volume, low viscosity liquids, non-conductive liquids, filter aid in beverage industry. The small and compact structure of the DPL allows it to be used in equipment where space is ...

flow meter / Pelton wheel turbine / for liquids / in-line
flow meter / Pelton wheel turbine
DPE-F

The DPE-F is a turbine wheel flow meter that is ideal for use in gauging and regulating fluids. The operating principle of the unit is based on the blade wheel principle. It is integrated with a six vane blade what that is fixed axially ...

turbine flow meter / for fuel / in-line / with counting function
turbine flow meter
DOT

The DOT is a turbine flowmeter manufactured by Kobold, that includes of helically shaped turbine rotor supported in two tungsten carbide bearings. The rotor being durable ferritic stainless steel of a grade compatible with metered fluid, ...

turbine flow meter / for liquids / in-line / high-accuracy
turbine flow meter
PEL-E

An extremely accurate turbine wheel flow meter applicable for liquids. The detector has its basis as the Pelton water wheel which is why the product has high dependability, with more than ten years of service experience. The flow meter ...

water counter
water counter

• Reed Contact Water Meters From 1/2” to 12” Diameters • Threaded: dry or wet dials, for cold (30°C max) or hot water (90°C max) • Flanged: dry dial • 1, 2, 2.5, 4 impulse/l, 1 impulse 5l, 1impulse 10l, 1 impulse 25l, 1 impulse 50l, 1 ...

turbine flow meter / for liquids / for water / for oil
turbine flow meter
HM-TRI

Process pressure: 0 Pa - 16 Pa
Process temperature: -20 °C - 150 °C
Volumetric flow rate: 0 l/min - 400 l/min

Measuring principle turbine Measuring ranges up to 400 l/min Output signal Frequency, Analogue 4÷20 mA, Display Process connection from DN 25 to DN 50 Materials Stainless steel, PTFE, FKM Temperature up to 150°C - Pressure max 16 bar HM-TRI ...

See the other products
Riels Instruments
turbine flow meter / for liquids / for water / for oil
turbine flow meter
HM-HP

Process pressure: 0 Pa - 4000 Pa
Process temperature: 0 °C - 350 °C
Volumetric flow rate: 0 l/min - 33 l/min

Measuring principle turbine Measuring ranges up to 33 l/min Output signal Frequency, Analogue 4÷20 mA, Display Process connection from DN 25 to DN 50 Materials Stainless steel, Tungsten Carbide Temperature up to 350°C - Pressure max 4,000 ...

See the other products
Riels Instruments
turbine flow meter / for liquids / insertion / IP65
turbine flow meter
M9

Process pressure: 0 bar - 10 bar
Process temperature: -20 °C - 70 °C
Volumetric flow rate: 1.6 l/min - 760000 l/min

M9 Insertion turbine flow meter with large graphic display of 4 The new M9.02 is a powerful flow monitor designed to convert the frequency signal of flow sensors into a flow rate. M9.02 is equipped with a wide full graphic display 4” ...

See the other products
Riels Instruments
turbine flow meter / for liquids / stainless steel / with display
turbine flow meter
PonyFlow5 Inox

Process pressure: 0 bar - 60 bar
Process temperature: 0 °C - 60 °C
Volumetric flow rate: 3 l/min - 3000 l/min

PonyFlow5 Inox Turbine flow meters with display battery powered. PonyFlow5 Inox Turbine flow meters with display battery powered. Flow rate up to 3,000 l/min PF9V is an electronic meter reading of flow rate and totalization. Display ...

See the other products
Riels Instruments
turbine flow meter / for liquids / plastic / with display
turbine flow meter
PonyFlow5 Nylon

Process pressure: 0 bar - 20 bar
Process temperature: 0 °C - 60 °C
Volumetric flow rate: 3 l/min - 3000 l/min

PonyFlow5 Nylon Turbine flow meters with display battery powered. PonyFlow5 Nylon Turbine flow meters with display battery powered. Flow ratea up to 3,000 l/min PF9V is an electronic meter reading of flow rate and totalization. Display ...

See the other products
Riels Instruments
turbine flow meter / for liquids / in-line / stainless steel
turbine flow meter
HM

Process pressure: max 10.0 bar
Process temperature: -40 °C - 150 °C

Application: Measurement of flow rate and volume in food and pharmaceutical applications; Suitable for dosing and filling applications Features: Cost-efficient and reliable alternative to magnetic-inductive flowmeters; Hygienic design ...