Tension / compression load cells

105 companies | 713 products
Filters
  • What’s new?
    Submit

BMs C9B compact force transducer is used for measurement of static and dynamic...

The C2 type series force transducers are used for measurement of compressive forces. The device...

C18 compressive force transducer is suitable for calibration tasks in areas...

This is a C2 load cell made up of stainless steel and carries...

The C16A is a rocker pin canister load cell which comes with a sturdy framework construction. Through...

{{productDetail[6017]}}

The characteristics include...

This is a highly durable and tightly packed design that features a built-in charge...

This durable device has a compact a compression and tensile force sensor. This is an affordable...

This sturdy and compact compression force sensor was created with a load button for force applications. It is a flat cylindrical disk that is...

Seven different measuring ranges from 0 to 100N and 0 to 10kN are provided by...

{{productDetail[5346]}}

- Sensors and gauges measure the reactive force from the road surface...

Features
Hermetical sealed stainless steel construction...

{{productDetail[54946]}}

The LCM105 series and LCM115 series from Omega are product lines that consist of durable and portable aluminum S-beam load cells that provide tension-calibrated assistance whenever...

Omega LCM900 series bolt force sensor is made of stainless steel. It provides exceptional stability, durability and dependability in challenging industrial applications. The device is a compression load cell designed for measurement of bolt's clamping force. It...

The FM intrinsically safe standard device features stainless steel construction...

All Stainless Steel for Harsh Industrial Applications
0.25% Interchangeable for Multiple Load Cell Applications
5-Point Calibration Certificate Included

Excitation: 10 Vdc (15 Vdc max)
Output: 3 mV/V ±0.25%
Linearity: 0.10% FSO
...

OMEGAs LCM203/213 Series is a high accuracy, miniature, low profile industrial load...

{{productDetail[19150]}}

The TVN load cell is a pair of suspended hoppers which are meant for non-trade use only. It is made of nickel plated steel body which is completely sealed with...

The compression load cells SCL from 35 to 55t is a compression load cell using single column technology used for weighing applications on weighbridges....

The basis for the measurement principle of the Precia digital compression load cell ASL is the alteration of the beams subject to compression force. The load cell utilizes strain gauges...

Precia Molen compression load cell TSL is offered in 4 capacities ranging from 5, 10, 15, 30 t. The low profile load cell is made of stainless steel, welded and...

Precia Molen presents weighing solutions for potentially explosive zones. It offers a broad variety of products and solutions...

{{productDetail[7658]}}

Schenck Process presents the self-centring VDW pressure load cell with superior quality. The perfect entry-level model is highly soughed after due to its high quality solution at low-cost. Since 2008, VDW load cell has been providing a reliable...

{{productDetail[14361]}}

Honeywell Model 41 Low Profile Pancake Load Cells are designed for highly accurate load measuring of 0.1%. Model 41 is a bonded foil, strain gauge that is available in two versions,...

Honeywell offers a broad selection of force sensor options for medical, engineering, and industrial...

Honeywell offers a broad selection of tension and compression load cells to cover...

Honeywell presents Model 6443 X-Y force sensor with carbon steel construction and minimal crosstalk. The sensor is composed of two strain gage bridges mounted at 90° and isolated by a flexure system. The entire set...

Honeywell Model 3140-CS tension/compression fatigue rated low profile load cell with base plate provides superior precision. The design offers a low profile stance for fatigue rated tension/compression...

{{productDetail[12365]}}

This equipment finds suitable association with suspended containers and Big Bags to act as an efficient and...

The compact SIWAREX WL270 CP-S SA compression load cell is designed...

The SIWAREX WL-270 CP-S SB is a life cell model designed for applications involving...

Siemens SIWAREX WL270 K-S CA compression load cell has an exceptionally high load class up to 500t and a very low height of installation. This makes it ideal for use in container...

{{productDetail[18343]}}

The LAU200 Pedal Force Load Cell offers an ideal solution for Automotive Applications. From its 17-4PH Stainless Steel one piece construction, to its low profile design (Off-center loading...

This is a force - load cell from Futex that has become the trusted and common product available in automotive industry. This is a system that...

The automobile industry loves to bring new ideas to the forefront and that is exactly what they have done with this unique Futek anodized aluminum LAU300...

This miniature column load cell by FUTEK comes with an impressive design, which is compact and makes the device suitable for high capacity applications. In addition...

The column load cell by FUTEK is known for its impressive and compact design, suitable for applications that require high capacity. In addition to the diameter...

{{productDetail[14287]}}

The LH-series of load cells are capable of ± 2% of full scale accuracy and are designed...

{{productDetail[14336]}}

The 17/03/2014 lock hatching units are now available with DLC coating and are...

{{productDetail[15600]}}

Types 8230-003, 8230-002, 8230-001 and 8230 are power transducers with essential electronics planned for active, short-time stationary and collision force...

The Type 8231 C provides measurements of dynamic, short-duration static and impact forces in...

The 8203 force transducer/impact hammer provides dynamic and impact force measurements on...

{{productDetail[17114]}}

The DLRx series is a load cell that offers static and dynamic force measurement....

Baumer piezo electric force sensor DLPP...

{{productDetail[7499]}}

The SCA3195 is a compression load cell manufactured by Ados. It has a maximum load...

The CCX series compression load cell, manufactured by Ados, is generally constructed using stainless steel AISI630(17-4-PH)....

The Compression Load Cell (Series: CFX/CRX), is manufactured by Ados, and is generally constructed into a low-profile...

{{productDetail[24904]}}

Celmi's SMC2 is a type of miniature compression load cell, suitable for use in small...

The EX601D series compression load cell, manufactured by Celmi, is generally applicable in small-capacity weighing...

The EX601H series is suitable for strength measurement in different kinds of small spaces....

The 377 Series, manufactured by Celmi, is a compression load cell used to measure both...

The BM24R model, engineered by Celmi, is a compression load cell intended for small capacity weighing...

{{productDetail[26919]}}

The CHATILLON® SLC Series load cells represent full-bridge strain gauge sensors complete with 15-pin plug. They are suitable for use in conjunction with Chatillon DFS-R-ND Series digital indicator....

The TLC series load cells by CHATILLON® are full bridge strain gauge sensors.with 15 pin plug used with Chatillon TCD1100, TCD225 & TCD110 digital force testers.
By recalibration...

{{productDetail[15294]}}

ERICHSEN hydraulic load cells enables simple and economic method of measurement of forces. It is based on hydraulic transmission of forces, which act on the piston...

{{productDetail[20681]}}

The Cm series is suitable for the measurement of loads in both static, and dynamic applications. The unit provides mountings and a case, which are not...

The CU series load cells are intended for measuring static or dynamic compression loads and features a nominal load range from 50 kg to 1 t. All...

TC series load cells are efficient strain gauge transducers with major applications in industrial weighing,laboratory testing and automation for measuring loads in static and dynamic applications with a high...

The TU assortment of load cells are customized for the analysis of constant or changing loads in high pressures or traction. All the transducers are regulated as load...

{{productDetail[7132]}}

DK0
Smallest compression force load cells for relativey large forces and...

Space saving compression force load cells based on the membrane principle...

DK4
Compact load cell for large forces based on the compression...

{{productDetail[50745]}}

The LM and LC series are compression load cells from Imada that are designed to measure force for FA plus series. These units are small,...

The LMT series manufactured by Imada is a Low profile compression load cell which...

The DM by Imada is a Compression load cell designed for door. This specific equipment...

{{productDetail[31618]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation