Burner accessories

62 companies | 252 products
Filters
fuel oil line heater - OPM

The Oil Preheater Module, manufactured by Bosch Industrial, is a supply intended for boilers that features...

{{productDetail[7270]}}
butterfly valve - DN 40 - 150, max. 500 mbar | BVG, BVA, BVH series

The EC type tested and certified butterfly valves establish the flow rate of gas or air on gas burners...

butterfly valve - DN 15 - 500, max. 300 mbar | DKG, DKL, DKR series

The main property of this butterfly valve is its impressive ability to set the flow rate on most gas burners. This model has...

burner controller - 120 - 230 V AC | FCU 500

The FCU 500 by Elster is a deterrent system regulator designed for regulating...

burner controller - 120 - 230 V | BCU 370

The BCU 370, manufactured by Elster, is a burner control unit that incorporates a flame control including...

flame detector / burners - 110 - 240 V | IFW 50

Elster FW 50 is a flame detector used for the uninterrupted detection of flames using...

{{productDetail[15505]}}
helm burner / oxygen - max. 25 000 Btu/h | OXY-PILOT®

The OXY-PILOT® Natural Gas Burner is composed of an inlet that is used for the mixture...

helm burner - LVDT-HC

The LVDT-HC is a pilot burner ideal to any procedural type of air heating applications such as thermal incinerators, supplementary...

shut-off valve / electromechanical / for gases / burners - 3/4

These electrically actuated valves shut off gas or oil lines in less than one second, for added convenience. All shut off valves...

shut-off valve / electromechanical / fuel oil burner - DCS

Electro-Mechanical Oil Shut-Off Valves by Maxon is perfect as a general purpose shut off valves. In less than one second, it can cut off...

shut-off valve / electromechanical / fuel oil burner - 3/8

These Maxon Electro-Mechanical Oil Shut Off Valves control oil lines in less than a second through its electrically actuated valves....

{{productDetail[20226]}}
burner nozzle - Blast Tips

These Blast Tips manufactured by Eclipse are compact burners specifically designed to manage combustible mixtures of gas and air...

burner nozzle - Blast Tips

Safe and stable fire maintenance is easily achievable in the introduction of Eclipse Sticktite and Ferrofix open burner nozzles. The...

air ejector / burners - 20 - 100 psig | AirJector

The Eclipse Airjector utilizes compressed air to gather substantial volumes of ambient air for combustion units. The Airjector is handy when the function of...

air ejector / burners - 20 - 100 psig | AirJector

Low Pressure Proportion Mixers are used to mix air and any commercially available fuel gas at low pressure and deliver the mixture under pressure to open or sealed...

gas train - max. 20 MM Btu/h

The 790 series is a range of packaged valve trains manufactured by Eclipse engineered to comply according to NFPA 86-2003 or Industrial Risk Insurers IM.4.2.0. standards. The IRI-type...

{{productDetail[21978]}}
gas train - 0.5 - 4 bar | HPRT series

The Linpac Plastics saves with Riello Burner, manufactured by Riello, is a fuel burner used to consume waste process fluid from the production...

gas train - max. 0.5 bar | LPRT series

These industrial combustion systems from RIELLO BURNERS employ pressure reduction and control units, in order to retrofit the pressure...

gas train - max. 0.5 bar | MBC series

The gas pressure available in a line can be brought to the values suited to the specific application by the pressure reduction and regulation groups.

A series of safety and...

gas train - max. 0.5 bar | VGD series

Pressure reduction and regulation groups allow to bring gas pressure available in the line to values suited to the specific application.Gas trains include a series of safety...

burner controller - QA series

These are control panels for burners which are accessible on various versions depending on the request. It has either wall-mounted or desk type version for example. It features...

{{productDetail[26924]}}
burners igniter - D-HG 400

The D-HG 400 high energy ignition device is suitable for the ignition of gas or liquid fuels in industrial burners of any capacity

Features
Ignition of liquid or gaseous fuels with large power ratings
Compact...

burner ignition transformer - D-HG 55

# Ignition of oil and gas
# High-performance and reliable ignition
# Simple to use and installation
#...

burners igniter - D-ZL

Ignition tip temperature-proof up to 600°C,
up to 800°C for a short period
High-temperature...

burner ignition transformer - AF series

High tension spark transformer according...

burners igniter - E-LIGHT 2000

Ignition and burner control for ignition burner, pilots burners, lances and...

{{productDetail[9067]}}
burner nozzle - Retain-A-Flame

Hauck's 'Retain-a-Flame' burner nozzles are recommended for firing of gas-air mixtures where a small amount of excess...

butterfly valve - FVA/FVS series

Operating conditions encountered in the automatic controlling of gas and air flows often require valves with an adjustable flow curve which can be altered at various points of opening to obtain the desired amount of flow. Such flexibility is not obtainable with...

fuel oil burner valve - MCOV series

The Hauck Micro-Cam Valve provides accurate, reproducible flow control of fuel oil to any type of industrial process, thus making...

fuel oil burner valve - MOV series

Hauck's Self-Cleaning Micro Oil Valves provide accurate, reproducible and linear flow control of oil to any type of industrial...

gas train - PGM series

The Hauck Prepiped Gas Manifold (PGM) is a factory assembled prepiped gas train that permits easy, fast...

{{productDetail[21960]}}
burner management system - se@vis eco

Special features

Preconfigured and ready for use immediately
Automatic leak test of solenoid gas valves
Certified safety with SIL 3 according to IEC 61508

The...

burner management system - se@vis compact

The main points

Automatic firing sequence controller for 2 fuels with 4 operating modes
Electronic compound regulation with 5 channels
BUS coupling for...

burner management system - se@vis pro

Suitable for all SAACKE burners
Automatic firing sequence controller for 3 fuels
Allows simultaneous...

burner management system - se@vis pro

The main points
Engineering of the entire plant environment
Oil fitting stations for light oil, heavy oil and biogenic fuels
Gas valve trains for all standard gases, alternative fuels and many special gases
Pumps, filters, preheaters and valves
Competent...

{{productDetail[21962]}}
burners igniter - 1 400 W | Firebox

Firebox (Ignition device for solid fuels)
Voltage V ~ 230
Power W 1400
Frequency...

{{productDetail[73654]}}
burners igniter - 1 400 W | Firebox

Gas control system
- Keep fix gas...

{{productDetail[40199]}}
butterfly valve - DN 250 - 3 000, 16 bar | PKIII/D

Application
Tightly sealing quick-closing butterfly valve as:

Safety shut-off element for gas burners
Safety shut-off systems to DIN 3384 upstream of gas pressure controllers
Gas-/air failure safety...

{{productDetail[71348]}}
burners igniter - MAX. 1000 °C

Glow igniters manufactured out of silicon nitride are usually rectangular in form. Inside the cast diameter of up to 300mm different sizes and batch sizes could be obtainable.

These igniters...

{{productDetail[63699]}}
feed pump / for fuel oil burner - 70-90 l/h, 25 bar, 1.2-50 cSt | DELTA VM

The DELTA VM fuel unit is an efficient modern oil burner
pump with compact design and since its mounting flange,
hub...

feed pump / for fuel oil burner - 70-90 l/h, 25 bar, 1.2-50 cSt | DELTA VD

VD Type

The DELTA VD fuel unit is an efficient modern oil burner pump with compact...

{{productDetail[21423]}}
gas air for burners mixer - 20 - 140 mbar | Flomixers™

Pyronics FLOMIXERS are proportional mixing devices that utilize...

gas air for burners mixer - 0.210 - 9 bar | Hijectors™

The Hijectors™ is a gas air, manufactured SELAS HEAT TECHNOLOGY LLC. This product...

mixing valve / gas / burners - 4100 Nm³/h


Superior Performance For Industrial Stand-By Fuel Systems, Utility Peak Shaving And Process Applications.

The Selas Blender Valve accurately mixes a wide variety of gases with air to provide a fuel gas compatible with natural gas. It handles high gas pressures (up to 150 psig or 1034 kPa)...

mixing valve / gas / burners - 4100 Nm³/h

The Pyronics ESTRO from Selas Heat Technology is a microprocessor- controlled flame regulated device prepared with key in and key out for the ignition and management of viable and industrial burners.

There are three diverse models of the Pyronics ESTRO:

ESTRO...

mixing valve / gas / burners - 4100 Nm³/h

The burner from Maxsys Fuel Systems is designed for maximizing the potential of fuel. It works by applying a calibrated magnetic field...

{{productDetail[22045]}}
mixing valve / gas / burners - 4100 Nm³/h

The alumina ceramic heater is manufactured by Innovacera, and is a ceramic heater equipped...

{{productDetail[99777]}}
ignition controller for gas appliances - GR-3A

CE CERTIFIED!

Functions:
1, Ignition
2, Flame Detection
3, Auto-shut-off when flame...

ignition controller for gas appliances - GR-3A

Taiwan Ceramic Tile for Infrared Burner
132mm...

{{productDetail[68099]}}
ignition controller for gas appliances - GR-3A

Do you have a use for the waste gas being burned? Can you increase your plants efficiency by using the waste...

gas recovery unit - 180 btu/ft3

Loading Facilities, Ethanol Plants, Truck Load-Out, Ethanol Load-Out, Biogas Flares, CDM projects, full compliance with...

{{productDetail[56385]}}
gas recovery unit - 180 btu/ft3

DENOX abatement plants through special catalytic beds and urea injection.

Airprotech is supplying DeNOx plants for many years in different industrial sectors.

This kind of application is recently requested...

{{productDetail[63395]}}
gas recovery unit - 180 btu/ft3

We offer advanced and dependable burner packages, safety systems and auxiliary products to solve combustion plant challenges. Committed to innovation...

{{productDetail[21977]}}
ignition controller for gas appliances - FX37SPT

The FX37SPT is a very reliable electronic ignition controller that is used in many gas appliances...

ignition controller for gas appliances - FX37SPT/D22

The FX37SPT/D22 is an electronic ignition controller engineered by AEC. It is suitable...

ignition controller for gas appliances - FX37-EP6

FX37-EP6 Ignition Control Box
The FX37-EP6 is a direct...

ignition controller for gas appliances - FX37-P16D1

The FX37P16D1 is a very reliable electronic ignition controller that is used in many gas...

OEM ignition controller for gas appliances - FX30LWD

The FX30LWD is a flexible electronic ignition manufactured by Abbey Electronic Controls....

{{productDetail[34036]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation