|
|
| Products 151 to 180 of 262 |
Plain metal belts are 'featureless', meaning they posess no perforations, attachments or coatings. They are manufactured by using a high energy beam to terminate two ends of a metal strip and form a belt. They are used in conveying, heat sealing, casting, and imaging applications. They are typicaly found in applications which can take advantage of 4 to 16 micro inch surface finishes, themal and electrical conductivity, and magnetic properties.
|
|
For applications where metal belt fasteners can't be used, the Alligator® Plastic Rivet Fastener System is a long-lasting, easy-to-install solution for light-duty applications. Our sturdy non-metallic fastener is also a low-cost alternative to the time and expense associated with vulcanization.
Fastener plate leading edges are beveled to ensure a smooth, low-profile splice. The one-piece fastener features an integrated design with rivets molded right into the fastener top plate - fast belt replacement means reduced downtime and increased productivity. Plus, the smooth surface is easy to clean.
Design permits use on applications with minimum pulley diameters as small as 1-1/2" (38mm) and on belts 1/32" to 1/8" (0.8-3.2mm) thick.
Choose the material that matches your application. UV-resistant black delivers extended life in outdoor applications. FDA-accepted white plastic is suitable for food and pharmaceutical processing applications, and resists weak acids, alkali, hydrocarbons, ester solvents, and alcohols. Both materials can be used in applications from -20°F to 180°F (-29°C to 82°C). |
|
| Contacted SARONTECNICA S.r.l for greater details. |
|
880 LFA
Low Friction Acetal Resin
• Plates in self-lubricating low friction acetal resin, light brown-coloured.
• Pins in chrome-nickel austenitic stainless steel (18% Chrome - 8% Nickel), work hardened for high resistance.
880 WR
Wear Resistant resin
• Plates in thermoplastic wear resistant resin, black-coloured.
• Pins in chrome-nickel austenitic stainless steel (18% Chrome - 8% Nickel), work hardened for high resistance. |
|
1. Problem/Initial situation
- Simple and reliable transport of a very wide range of work pieces and work piece carriers
- Continuous conveying, accumulating, singling out and acceleration
2. iwis Solution
- High performance power and free chains in accordance with the high iwis standard in a wide range of designs
- L 88 SF and M 120 SF, the exclusive new iwis generation of power and free conveyor chains (registered patent)
3. Highlights
- Gentle transportation and optimum support for the material being conveyed
- In accumulating operation, roller friction only (see figure below)
- Easy to position the material due to simple mounting points
- Chain no longer starts and stops jerkily
- The transport speed can be doubled due to a simple acceleration rail (see figure below)
- The newly developed "light running rollers" lead to a high reduction of drive power
- Transport rollers made of either hardened steel or plastic (also anti-static)
- The outside of the chain is clean because only the articulated points are lubricated
- Low-maintenance due to special wax lubrication (standard)
- Other special initial lubrication for special applications on request
- Fully compatible with existing guides, deflector units and chain wheels |
|
PVC 150S1 EBb
Application: An industry favorite, Goodyear's Eclipse profile is very popular for use in general purpose incline applications. The durable all polyester interwoven carcass provides low stretch, excellent fastener retention and good tear resistance. The economical PVC cover compound has superior mineral oil resistance as well as excellent wear characteristics.
PVC 200S1 CFb
Application: An industry standard for general conveying, the belt's diverse applications include recycling, package conveying, fruits and vegetables, baggage and virtually all processing industries. The all-polyester, single-ply interwoven carcass provides low stretch, excellent fastener retention and good tear resistance, all at an economical price. The durable PVC compound offers mineral oil resistance and good wear characteristics.
PVC 200S1 CNb
Application: An industry standard for general conveying, the belt's diverse applications include recycling, package conveying, fruits and vegetables, baggage and virtually all processing industries. The all-polyester, single-ply interwoven carcass provides low stretch, excellent fastener retention and good tear resistance, all at an economical price. The durable PVC compound offers mineral oil resistance and good wear characteristics.
PVC 200S1 EBb
Application: An industry favorite, Goodyear's Eclipse profile is very popular for use in general purpose incline applications. The durable all polyester interwoven carcass provides low stretch, excellent fastener retention and good tear resistance. The economical PVC cover compound has superior mineral oil resistance as well as excellent wear characteristics.
|
|
| We offer a wide range of PU and PVC belts. Every year our R&D department designs new styles and our high degree of flexibility enables us to manufacture belts according to your specifications from 200 m² within a few weeks. |
|
In response to industrial customer needs, Hutchinson Transmission has specially developed the ConveyXonic® belt for roller conveyor producers.
The ConveyXonic® is the « 4 in 1 » belt capable of transporting loads from 1 to 1 200kg (2 to 2500 lbs.) as well as replace the four systems used in the conveyor assembly (flat belt, round belt, chain and timing belt).
The belt's elastic properties allow for at least a 30% reduction in costs by using 1 motor for twenty rollers while at the same time adding the advantages of improved life span and absorption of shocks and vibrations.
With a potent torque transmission - up to 4 times greater than an O-Ring - increased package flow speed up to 4 meters per second, the ConveyXonic® belt improves efficiency while working silently, requiring little maintenance since lubrication and retensioning and are not needed, and ending corrosion concerns.
Easy to use thanks to an automatic or semi-automatic installation, our ConveyXonic® product line has already been designed for you.
It is standardized in function of the center distance, the center distance tolerance and the transported weight.
The ConveyXonic® is available worldwide, with two, three of four rib profiles (PJ2, PJ3, PJ4), through our distributors.
We would be happy to put you in contact with the distributor closest to you.
. |
|
Flexco is proud to be the fastener of choice in the underground mining industry. It delivers the performance, long life and easy installation that maximizes belt availability and helps keep productivity on a roll.
Designed for rubber plied and PVC solid woven belting, and for worn belts unfit for vulcanized splices, the Flexco® SR™ Scalloped Edge™ fastener features a low profile that significantly reduces the fastener exposure to cleaner blades, skirt rubber, and return idlers. The staggered rivet pattern also provides maximum holding ability by allowing the rivets to pass between the carcass fibers without damaging them.
A built-in viewport simplifies fastener positioning. And self-setting rivets are installed from the top side of the belt for faster installation.
Hinged construction makes Rivet Hinged fasteners ideal for applications requiring frequent belt-length alterations, the joint can be separated simply by removing the hinge pin. A variety of hinge pins are available to match your application.
A variety of Flexco SR Scalloped Edge fasteners are available for belts with a mechanical fastener rating up to 2000 PIW (350 kN/m). In addition, the fasteners, hinge pins and rivets are all available in a variety of materials. |
|
The space saving turning unit for 5 t und 10 t coils.
Coil turning units of type C 5 and C 10 are available as turning units
[Typ C 5 W and C 10 W] or as turning/rotation unit [Typ C 5 WD and C 10 WD].
Advantages:
safe and fast turning operation without lifting straps
no damage to coils during turning
space saving construction
easy loading from one side (Series WD)
easy mounting, ready to plugin
the coil turning units come with a control panel
safety guards on request
|
|
Fastener for light duty belts with self locking hooks:
- Clamping effect through the lashes
- Locking of the hooks in the lashes
- Smooth surface
- Maxi. belt thickness 4.5 mm
- Maxi. belt tension 35 N/mm
Material:
Non magnetic Stainless steel AISI 316 or galvanized steel.
Installation: By using a hammer tool.
Packaging:
In standard boxes each containing 4 splices from 300 mm to 3,000 mm belt width in one piece. |
|
Montrac is a monorail transport system – similar in design to a model railway.
Components from this system are: Trac, Shuttle, Curve, Trac gate, Lift aso.
Montrac provides transport of materials in one or several planes, free of jolts and vibrations. It meets the most stringent antistatic requirements and is suitable for use in cleanrooms.
|
|
Ramsey specializes in silent chains for industrial power transmission and conveying. This has been our focus for more than 80 years and today we remain committed to providing our customers with the world's widest range of top quality silent chain products.
Because we specialize in silent chain, also known as inverted tooth chain, we understand how important it is to choose the right chain and sprockets for each application. We also understand that practical, cost effective, solutions are important to every customer. With this in mind, our trained sales and engineering staff is here to assist you in selecting the solution that will best meet your needs. If a job can be done with silent chain, we will help find the best chain for the job, at the lowest possible cost.
With warehouses and representatives around the world, we welcome the opportunity to serve you.
|
|
Typical features :
single - or dual sided coating,
easy belt cleaning,
good drive features,
heat- and cold- resistant (-30°C/ 280°C),
food transport,
hygiene industry |
|
| We have two different types of silicon belts, among them the VS292, an all-silicone belt with a fiberglass carcass to ensure good performance in extreme-temperature applications from -50°C up to +200°C. |
|
Flexco® Bolt Solid Plate fasteners are engineered to meet the demands of the toughest material-handling applications. They can be applied to belts mechanically rated up to 620PIW (105 kN/m), and are commonly used on higher-tension main-haulage belts used for highly abrasive materials such as sand, gravel, and crushed stone, as well as coal, cement, and salt.
Bolt Solid Plate fasteners provide a strong, sift-free splice with superior holding ability. The strength of this fastener is derived from the compression of the plates with high tensil strength bolts. The bolts compress top and bottom plates to distribute splice tension evenly across the entire width of each fastener plate. For added strength and pull-out resistance, specially formed teeth penetrate deep into the belt carcass - without damaging the carcass fibers.
Specially designed templets, punches and boring tools make it easy to quickly and accurately punch holes into belts. Fasteners can then be installed on site using portable hand or power tools. The exclusive Flexco piloted bolt speeds installation. The piloted bolt tip cradles nuts securely in place, and simplifies installation by automatically aligning the bolt and nut threads. |
|
Traditional fastener for rip repair and lacing.
Typ 140, 190, 1 ½, 2, 2 ½ & 3 for belts up to 25 mm thick.
Installation with a template, a driller and a wrench.
Material:
Fastener made of carbon steel galvanized or wear resistant special steel or stainless steel with a nylon washer holding the bolts.
Installation:
A template helps to make the holes with a driller. Using a wrench for screwing the nuts and a bolt breaker.
Packaging:
Standard box with 25 pre-assembled fasteners Type 140, 190, 1 ½, et 2.
Standard box with 10 pre-assembled fasteners Type 2 ½ et 3.
Bucket wit 100 pre-assembled fasteners. |
|
Our heavy-duty Rivet Solid Plate Fastener System is recommended for the most demanding high-tension applications. The staggered, multiple-point attachment delivers long-lasting holding ability for mechanical ratings up to 800 PIW (140 kN/m).
Rivet Solid Plate fasteners feature a smooth coined-edge profile eliminating fastener projections and potential hang-ups. The broad width and heavy gauge of the plates also results in long fastener wear life.
Thanks to the Flexco self-setting rivet method and portable MBRTA installation tools, Rivet Solid Plate fasteners install quickly and easily.
Look below for more information on this product. |
|
| The Splice Monitoring System allows the remote measurement of splice elongation. The SMS monitors all types of splices in fabric conveyor belting by imbedding small targets into the belting at a set distance on either side of each vulcanised splice. No such targets are imbedded for mechanical clips. |
|
Versatile spring loaded units which are pre-loaded to support from 23 to 2036 kgs.
Integral moulded Nylon seal and zinc plated housing for corrosion resistance. Available in different forms, with or without additional fixing flange. Load at maximum deflection from 32 to 2036 kgs. |
|
Flex RXMC
Inox
• Ferritic, AISI 430 stainless steel slats, work hardened, with shiny surface having low roughness.
• Chrome-nickel, austenitic stainless steel pins and guide shoes (18% Chrome - 8% Nickel), work hardened for high resistance. |
|
Stainless Steel is often specified when sanitation requirements are a primary concern. The hard, flat and smooth surface of the belt is easy to clean with steam or chlorinated water. Corrosive cleaning solutions will not harm the belt material. In food applications, the belts provide a stable material that will not absorb natural odors or effect the tastes of materials being transported.
|
|
Stainless Steel Belt Food Conveyor
"Shin-Con-San"
Bears brilliant durability, corrosion resistance, and chemical resistance, due to its all-stainless steel body.
It is optimal for conveying items that require heating, drying, and cooling to extents impossible for resin or rubber belts!
Unlike rubber or resin belts, stainless steel prevents the infestation and reproduction of bacteria, making it optimal for loading food directly onto the belt!
- Despite being a stainless steel belt, its drive / tail roller diameter is a minimal size of 80mm, enabling smooth food transfers and compact layout.
- Stainless steel belts do not wither or deteriorate when cleaned or sterilized by hot water or alkaline chemicals.
- Since food colorings and smells can be washed away from stainless steel belts, products can be conveyed without concern.
- Belt edges do not fray and coatings do not peel. Our belt eliminates any fear of foreign particle insertion.
Applications:
Direct food loading conveyance, food filling, packaging line food sterilization, cleaning, dewatering / drying lines, freezing / cooling lines |
|
Sandvik 1150SM should not be exposed for prolonged periods
(a few hours) to temperatures exceeding 250°C (480°F) as a change
(increase) in strength due to precipitation hardening takes place at
high temperatures. |
|
|
|
Accessories for conveyors: Belts, Rollers
