|
|
| Products 121 to 150 of 197 |
The tipping horizontal pressure tank O.ME.P.S. type CM 25 is manufactured of Peraluman 45 R light alloy to transport powdery foodstuff (flour) for a total capacity of 25 m3. It is tested at 2 bar pressure according to the standard PED 97/23/CE.
The vertical discharge system is equipped with:
n° 03 load manholes with 3 wing nuts’ closing;
atoxic and polyvalent unloading system;
n° 1 aluminium bottom for the product unloading, complete of butterfly valve, Ø 150 mm;
atoxic rubber pipeline;
accident protection (n° 1 anti-slip ladder, n° 1 gangway with a pneumatic safety handrail) according to the standard C.M. 294/93;
n° 2 unloading hoses, Ø 100 mm, 6 m long, complete of their hosetubes;
tank chassis in S 355 JR steel, equipped with n° 2 saddles for the tank support;
hydraulic system compound of tipping cylinder, valves group for the control, hydraulic circuit with pipeline and connectors, hydraulic oil tank, rear stabilizing legs, kit hydraulic pump
Tank painting: unique tint O.ME.P.S. WHITE (different colour/logo application on demand)
Structure guarantee: 24 months.
The tank is homologated in accordance with the standard PED 97/23/CE
* Supply and assembly of N° 1 GHH - RAND COMPRESSORS TYPE CG 80, PTO not included (supply by your side). |
|
| The Telestack tracked conveyor gives users rhe ability to create high capacity stockpiles in any terrain. The TS 624 tracked conveyor can be used in a variety of applications including; stockpiling directly from a primary crusher, loading barges and stockpiling safely over a quarry face. It has a throughput rate of up to 600 tonnes per hour and is capable of stockpiling 200mm down material |
|
| Process-technical processes again and again require individual adaptation to the requirements of the product and the surrounding system. To meet these requirements flexibly and creatively is a challenge for us, as builders of machines and systems. Our references indicate success in vibration technology over the past 60 years. The list of the applications here extends from plastics, chemical basic materials and fertilizers, through food such as rice nuts, chips, vitamins, flavor additives and vegetable, up to hot iron oxide at 800°C. |
|
| The ITECA SOCADEI loading spout is one of the best solution for loading tankers. His higher part is equipped with an opening of dust extraction. The intermediate part can be a flexible conduit or a stacking of encasable and hinged cones by one, two or three cables. As for its low part, it is equipped with a cone of accosting for a better centring on the hole of filling of the cistern as well as cone with closing integrating the detection of level "Full tank". The raising of sleeve is either manual by cable or motorized. User can order by electrical power box or a hanging box. Its use is largely widespread in particular in the cement plants, pets foods, free lime factories, carbonate of calcium manufacturers, loading of cereals, PVC... |
|
This tubular powderer has been created in order to combine, for a given width, a precise dosing and a perfect distribution of a large number of powdery or granular products, like sugar, spices, metallic oxides, talc, resins, cocoa.
The tubular powderer can be applied to different purposes: encasers feeding or other mixing processes, powdering on belt conveyors, plates, moulds, etc. |
|
For distributing grain and granular products by gravity without overpressure inside of the pipe-system and with no demand for dust-tightness internally.
Feeding from the top through the turn-pipe towards the requested outlet inside of a closed casing.
Pressing-on of the rotary pipe seal by means of 2 pressure springs.
Support by means of four lugs, fixed to the lower funnel circumference according data-sheet.
Electrically operated by means of a gear-motor, motorcurrent 230/400 Volt, 50 to 60 Hz.
Positioning by means of mechanical limit-switches, wired on terminals in a connecting box.
Proximity switches with surcharge. Turn-head distributor must not be operated when transporting material.
All dimensions are approximate.
Additional electric pressing and position control of the turn-pipes outlet position with proximity-switches, fixed into the lower funnel, with surcharge.
Product-contacting parts made of stainless steel with surcharge.
ATEX versions according to category 2 or 3 with admissible Zone 20 in turn-pipe on request. |
|
'The Mammoth' vacuum collection unit
High Powered Heavy Duty Industrial Vacuum Cleaning & Bulk Collection Solution for industries with the most demanding clean up problems. High vacuum and airflow provide the strength to clean up the most inaccessible areas quickly, with minimum labour and in an economically effect.
Working as the heart of fixed pipe work systems in heavy industries such as Iron & Steel, Cement, Power Generation, Quarries etc the Mammoth provides the power to enable multiple operators to work simultaneously.
On a large site, with long conveying distances, or where cross contamination of products is to be avoided, shorter, dedicated pipe runs can be employed.
Available options
• Power units from 7.5 to 150kw
• Electric, Diesel, LPG engines
• Acoustic enclosure for noise reduction
• ATEX compliant models
• Support frames, access and service platforms
• Skid/ Truck or Trailer mounting
• Wide variety and sizes of hoppers including self-tipping
• Dump, slide, rotary valve hopper discharge options
Clyde Materials Handling engineers can also design custom specific requirements.
For further details please see: www.clydematerials.com
|
|
| Vibration spreading equipment can be supplied as vibration strewing plate or as vibration strewing roof. Vibration spreading equipment finds their employment, where volumes, rollers or surfaces with a small quantity of rieselfähiger materials are fed evenly. The stray current depends on the size of the equipment, the gap, the swinging amplitude and on the characteristics of the grit. On grit and attitude the strewing achievement amounts to dependent approx. 1-1000 litres per meter spread and hour. The achievement change particularly takes place via the gap width and via the simple, stepless, also oscillatory width of the magnet vibrator adjustable during the enterprise. |
|
Advantages of Gericke Volumetric Screw Feeders
+ High dosing accuracy
+ dosing pipe and spiral/screw fast against other size/sizes of exchangeably
+ simple cleaning
+ durable design and nearly unlimited life span
+ complete from stainless material manufactured (except drive unit)
+ extended dosing set up to several meters of length possible |
|
In principle, volumetric feeding is the simplest, most economical feeding solution available. Bulk material is held in a hopper and constantly fed into a process per unit of time. A gravimetric feed rate may be inferred through a calibration process where a timed sample is taken and weighed, and screw speed adjusted accordingly. Although there is no weight feedback to assure feeding accuracy over time, this may not be a concern for materials with consistent bulk density.
K-Tron offers three choices in volumetric feeders: the highly accurate bulk solids pump (BSP), single screw feeders and twin screw feeders. K-Tron volumetric feeders come in a wide variety of of sizes and configurations to meet your application requirements.
|
|
The unique MCPI’s Multi Channel Feeder, is probably the best solution on the market, to give a simultaneous, quick and accurate dosing of ingredient on multiple application points, with sprinkling effect.
These feeders are controlled with motor rpm and outlet section of extractor. MCPI’s “Short-cut system” is mechatronic solutions which ensure a perfect control of the extractor movement with repeatability below 3/100 sec, to ensure quick and accurate feeding.
This range of machines is an efficient cost effective solution for high cadencies productions (dosing time from 0.2 sec, up to 60 dosing cycles / min). The feeder can be fit on “C” shape mobile truck, to facilitate cleaning operations.
Design of these feeders is made in agreement with drug and food industries requests for cleaning.
For more detail, see enclosed PDF data sheet |
|
Regularity of proportioning
Proportioning of difficult products
Devoutor adapted to the product
Design facilitating cleaning
The system of dévoûtage fulfills with him only the functions of perfect filling of the screw of proportioning and dévoûtage in the tank.
Solutions of fast disassembling were especially studied to support cleaning.
The materials used are selected according to the characteristics of the product to proportion.
Principles
A cylindrical tank equipped with a devoutor and a mechanical system of proportioning without air nor vibration allowing to proportion any type of products in powder form or granulated.
The output control is obtained by variation speed on the system of proportioning. The cramming of the system of proportioning is carried out by the devoutor who fulfills this function, while dévoûtant the product in the hopper.
Examples of treated products
Dry flours, powder cocoa, fruits, frozen talc, salt, sugar, vegetables, sulfur, metallic oxides, dry grapes, almonds, pigments, pellets, fibers |
|
The ZFP/DM model is a mechanical discharge and metering unit for powders stored in bulk. It can be fitted under any bottom hopper.
The storage capacities can be from 50 litres up to 5 cubic metres. It caters for outputs from a few l/h up to 15 m3/h according to the product.
Its design provides many possibilities :
· material (mild stell, stainless steel, PEHD)
· fixed or variable throughputs
· single or multiple metering conveyors, rigid or flexible
· numerous discharge diameters (350, 500, 800, 1000, 1250 mm)
· numerous options (lid, grid, supports, switches, inspection hatch, etc...)
ADVANTAGES
Mechanical discharge, without air or vibration, therefore without contamination or compaction.
Low power consumption.
Totally sealed and dustproof, quiet in operation.
Ease of installation with flexible conveyor.
APPLICATIONS
Sack-emptying hopper
Buffer hopper
Discharge from Big-Bag or container
|
|
Suitable for packaging granular and other homogeneous, easy-to-transport products like : sugar, salt, rice, coffee, bird feed, dried fruit, washing powder, pasta.
DV200 AND DM200 VOLUMETRIC FILLING MACHINES
To fit onto bagging machines or semiautomatic versions, with stands and work tables.
Features
Operate independently from the bagging machine
Telescopic containers adjustable for a proportional volume from 1 to 2.
Closing with a flap
Interchangeable containers
Electronic control of discharge point
Poss. build in a servo for automatic container adjustment, enabling synchronisation with a weight controller
A set of stainless steel containers
Optional equipment:
Extra set of buckets
Servo motor to regulate automatically the capacity of cups
All-stainless steel build
Special hopper with a stirrer for difficult products
Rotating brush
Level sensing device
|
|
It is, with the transfer, the oldest know-how of Spiroflux.
The dispenser on ground DRD, first of all, was one of the "products headlight" of the company. We manufactured some more than 2500 specimens, and always let us manufacture we, although gravimetric measuring makes him competition cruelly.
Practical, allowing the désachage matter, particularly robust,... it still remains to him of beautiful days in front of him, in France as with export.
The dispensers of colorants, then, such as FD and DCU are very competitive equipment (price/quality) which forges the reputation of Spiroflux.
Sold directly on catalog, they are held in stock (like their spare parts), and thus quickly operational at the customer. |
|
Fully automatic polyelectrolyte solution system for granular and concentrated liquid polyelectrolyte (for other products on request).
Designed as two-chamber pendulum system. Our systems achieve a reliably high quality in preparing polyelectrolytes while saving resources as much as possible.
|
|
Weighfiller
For automatic and precise dosing of dry, free-flowing products
Liebel Dosing systems LDS 1, LDS 2 and LDS 3 (single, twin, and triple linear weigh fillers) can be used for high precision dosing of powder, grain, granulate and chunky product. This can be herbs, teas, spices, coffee, sugar, wheat, pharmaceutical products, screws, bolts etc …. Our industrial standards guarantee excellent precision together with unsurpassed reliability over many years of life-span. Stainless steel finishings with polished surfaces and a high ground clearance permit excellent cleaning properties.
- Complete finish in stainless steel
- Adaptive controller with self-learning limiter and dosing speed
- 25 memory cells for different articles
- The dosing channels are adjustable to cope with very different product dimensions and attributes, optional also from memory
- Open design, easy to clean
- Also available as “multi-construction“ for high capacities or product mixtures
- Either manual handling or synchronization with packing machines |
|
Virtually any bulk material, from any upstream source, to any downstream destination
Whether you are sourcing material from bulk bags, silos, manual dumping stations, process equipment or all of the above; weigh batching one ingredient or 50; blending your recipe; filling containers, and/or delivering it to process vessels, packaging lines, or any other destination; Flexicon has the comprehensive selection of equipment you need for a total weigh batching solution.
From individual loss-of weight bulk bag weigh batch dischargers to automated gain-in-weight batching/ blending systems integrated with your upstream and downstream equipment, Flexicon offers you the entire range of specialized equipment -and the engineering talent-required for a smooth start-up and efficient performance.
Equally as crucial to your weigh batching success is the proven ability of Flexicon equipment to move your material-at high rates for fast batching cycles and at steady dribble-feed rates for highly accurate weighments -and to deliver recipes with no separation of blended materials and no exposure to potential contamination.
Whether your ingredients are free-flowing pellets, powders that pack, bridge or smear, products that fluidize, or blends prone to separation, Flexicon can move them positively, weigh them accurately, and deliver them in prime condition.
|
|
K-Tron Gain-in-Weight Batching Stations provide flexible and economical batch prep for applications up to eight components and 100 recipes.
Accommodates any K-Tron volumetric feeder, including single screw, twin screw, Bulk Solids Pump (BSP), or any other PID device
Accurate, durable three-point collection hopper weighing
Full-featured KGIW controller with automatic recipe control, multi-line alphanumeric display, configurable I/Os, integrated reports and IP65 stainless steel enclosure
Supports connection to a PLC via Interbus-S, Profibus, or DeviceNet
Optional supervisory link via serial line or Ethernet TCP/IP |
|
This range of batchers makes it possible to proportion any type of powder and in particular the clogging, sticking powders and mottantes.
The principle of dévoûtage guarantees a perfect and constant flow product allowing a precise proportioning.
The flows according to the models can go from 1 kg/h to 20 t/h
with accuracies of 0,5%.
Solutions of easy disassembling allow fast and easy cleanings. All the parts in contact with the product are accessible easily and without tools.
According to the process and environment, research department PARIMIX will design these batchers for a perfect adaptation.
Products: any type of powders, Powders egg, Improving, praline-flavoured ice cream, sugar freezes, frozen dextrose, cocoa, vegetables, etc.... |
|
ProMix Manual Recipe Formulation
…the formulation system for manual batching by weighing raw materials of a recipe using high-resolution scales for stand-alone and multi-user systems. It increases process reliability and transparency.
Automatic Batching System ProBatch+
…allow data management of raw materials, recipes or formulas and materials, and serve as central operating workstations for batching applications in automated processes. |
|
Weighfiller
For automatic and precise dosing of dry, free-flowing products
Liebel Dosing systems LDS 1, LDS 2 and LDS 3 (single, twin, and triple linear weigh fillers) can be used for high precision dosing of powder, grain, granulate and chunky product. This can be herbs, teas, spices, coffee, sugar, wheat, pharmaceutical products, screws, bolts etc …. Our industrial standards guarantee excellent precision together with unsurpassed reliability over many years of life-span. Stainless steel finishings with polished surfaces and a high ground clearance permit excellent cleaning properties.
- Complete finish in stainless steel
- Adaptive controller with self-learning limiter and dosing speed
- 25 memory cells for different articles
- The dosing channels are adjustable to cope with very different product dimensions and attributes, optional also from memory
- Open design, easy to clean
- Also available as “multi-construction“ for high capacities or product mixtures
- Either manual handling or synchronization with packing machines |
|
Spiroflux belongs to the pioneers in the development and the manufacture of weigh batchers by "batch".
As of the beginning of the years 1990, with range SPIROMIX, we equipped with many famous users, in gravimetric measuring, very often to replace the volumetric feeders.
To date, Spiroflux proposes various families of dispensers: SPIROMIX, DPX, MULTIMIX...
Simple with use, robust, reliable and with a very competitive price, these weigh batchers cover all the applications of the plasturgie, and offer many opportunities in the agro-alimentary one.
To proportion from two to six products, with flows of a few kilograms to a few tons per hour,... the possibilities many in proportioning by "batch" or are dépesée continuous. |
|
|
|
Bulk and powder handling and equipment
