|
|
Omniwheels Series 2500
Features
- Conveyance in any direction possible
- Simply designed crossings and switches
- Version driven in one direction possible with hexagonal spindle
- Wheels can be coupled to one another
- Easy to assemble
- Can be used in a dusty environment
- Can be used in a moist environment (stainless steel journal)
- Bottom of the items must be flat and sturdy
- Corrosion resistant
- Load capacity: 500 N per wheel
Standard part numbers
2570 - 48 mm dia.
2580 - 80 mm dia.
Dimensions
Outside diameter 48 or 80 mm
Hub bore dia. 8.2, 12.2, 16.0 mm 11.2 hex or 19 hex
|
|
Tazze per elevatore tipo SPS (super Starco) nuovo profilo per ottimizzare lo scarico del prodotto e aumentare nettamente la portata dell'elevatore.
Supporta elevatissime velocità.
Possono essere fornite:
in ferro
in acciaio INOX 304
in Polietilene alta densità (HDP) ottimo sostituto del ferro
in Nylon 6 ottimo sostituto dell'acciaio INOX 304 e con eccellente resistenza all'abrasione.
in Poliuretano per particolari esigenze
Gamma in continua evoluzione, attualmente sono presenti 19 stampi differenti (dalla larghezza 80 mm alla 520 mm)
la Tazza SPS è la più venduta in Europa ed è stata scelta dalla maggioranza dei costruttori diventando così lo standard europeo.
Ricordatevi "SPS" è la sigla che distingue l'originale dalle imitazioni.
|
|
|
|
|
|
In response to industrial customer needs, Hutchinson Transmission has specially developed the ConveyXonic® belt for roller conveyor producers.
The ConveyXonic® is the « 4 in 1 » belt capable of transporting loads from 1 to 1 200kg (2 to 2500 lbs.) as well as replace the four systems used in the conveyor assembly (flat belt, round belt, chain and timing belt).
The belt's elastic properties allow for at least a 30% reduction in costs by using 1 motor for twenty rollers while at the same time adding the advantages of improved life span and absorption of shocks and vibrations.
With a potent torque transmission - up to 4 times greater than an O-Ring - increased package flow speed up to 4 meters per second, the ConveyXonic® belt improves efficiency while working silently, requiring little maintenance since lubrication and retensioning and are not needed, and ending corrosion concerns.
Easy to use thanks to an automatic or semi-automatic installation, our ConveyXonic® product line has already been designed for you.
It is standardized in function of the center distance, the center distance tolerance and the transported weight.
The ConveyXonic® is available worldwide, with two, three of four rib profiles (PJ2, PJ3, PJ4), through our distributors.
We would be happy to put you in contact with the distributor closest to you.
.
|
|
The space saving turning unit for 5 t and 10 t coils. Coil turning units of type C 5 und C 10 are available as turning units (Type C 5 W and C 10 W) or as turning/rotation unit (Type C 5 WD and C 10 WD).
The advantages:
- safe and fast turning operation without lifting straps
- no damage to coils during turning
- space saving construction
- easy loading from one side (Series WD)
- easy mounting
- ready to plug in
- the coil turning units come with a control panel
- safety guards on request
Special coil turning units on request.
|
|
High Speed Rotator
The Ryson High Speed Rotator is a new innovative conveyor for in-line rotating of cases and other unitized loads.
The loads can be rotated 180º or 90º in a continuous motion. This new conveyor is used in packing lines where products need to be rotated upside down or to one side without delay or product damage, The Ryson High Speed Rotator can accommodate a wide range of load sizes without adjustment.
|
|
Pack turners
These machines turn the products through 90° or 180°.
The products can be handled at low or high speed.
Different technologies can be offered :
The pack turner by difference of speed :
The product is turned by 2 belts which have different linear speeds.
The pack turner by pin :
This is the same technology as for a divider. The product is rotated by pins which are in the slides.
The upper pack turner :
A clamp takes the product by the top and rotates it.
|
|
Montrac is a monorail transport system – similar in design to a model railway.
Components from this system are: Trac, Shuttle, Curve, Trac gate, Lift aso.
Montrac provides transport of materials in one or several planes, free of jolts and vibrations. It meets the most stringent antistatic requirements and is suitable for use in cleanrooms.
|
|
Optimum possible capacity for a given elevator case
Buckets are closely spaced & products is elevated in an almost continuous column
Series of bottomless buckets is followed by bucket with bottom
Self-cleaning - ideal for sticky material
|
|
elevator buckets: pressed steel, stainless steel. 8 cm to 63 cm.
We have althought elevator belt, elevator bolts and junctions belt
The steel "JET" elevator buckets is the last born of the very high performance buckets' range. It is made of pressed steel of very high resistance, without any welding. The steel "JET" elevator buckets represents the perfect synthesis of modern injection and elevation engineerings for most of dusty products.
The biggest European constructors have chosen the steel "JET" elevator buckets as the Reference in the elevation field.
|
|
|
|
|
|
Transfer Chains
Conveying, transporting, stop-start conveying of single parts, pallets
1. Problem/Initial situation
Open transport chains:
Prone to interference from foreign bodies and small parts
Often cause operational breakdowns
Increased risk of injury
Damage to material being conveyed
Adherence of dirt and dust
2. iwis Solution
The TF chains:
iwis high performance roller chains with wear-resistant highly resistant plastic support brackets Exclusive to iwis.
3. Highlights
Functional areas of the chain are completely sealed, basic chain protected from penetration by foreign bodies
Gentle transportation of sensitive materials
Precisely fitting covers prevent the risk of injury and operational breakdowns
Chain is completely clean on the outside, therefore no dust is bonded to it.
Initial lubrication with extremely high adhesion to the base chain (standard)
4. Technical Features
Supporting bracket: made of polyacetal resin. Temperature range for use: 40°C to 100°C, up to 140°C for brief periods
High wear resistance if the material being conveyed has a smooth surface
Good chemical resistance
Shore hardness to DIN 53505: 85
Anti-static on request
5. Industrial Applications
General engineering
Transport and storage technology
Packaging and food industry
Electronics and printed circuit board industry
Electrical and household equipment
Medical technology and pharmaceutical industry
Wood, glass and ceramics processing
Chemical and process technology
Printing and paper
… and everywhere where gentle transportation is required
|
|
For new conveyor installations or retrofit existing conveyors. Weigh Legs have adjustable height and capacities from 250 to 1,000 lb per Weigh Leg frame.
Weigh legs allow you to save steps and increase productivity with in-line weight measurement and checkweighing.
The Weigh Leg frame is an integrated assembly, incorporating two supporting legs, two Weigh Bars, junction box and cabling. The finish is a heat-fused powder paint, which provides a high level of corrosion protection.
|
|
| ... products without technical information |
| |
|
|
Other Conveyor Equipment and Accessories
