|
|
pivot arm KSL
Rigid load lifting modules, such as Z-Lift pneumatic lifting axes or electric telescopic lift devices type TR/TV can also be fitted to KSL pivot arms. This combination is a particularly cost-effective variant for rigid load handling. |
|
| The knuckle type jib for use where the standard design interferes with plant layouts. The knuckle jib is also ideal for use with the Palamatic horizontal tube system. All slewing jibs and articulated arm jibs can be suspended from vertical steel columns or from existing stanchions. In some professional cases these can also be fitted to professional building walls, although in this case (and in the case of the existing stanchion) the suitability of such is the customers' responsibility. Mobile base plates are available for some slewing jib cranes suppliers. This professional crane can be transported using the clients' fork-lift professional truck for use in different parts of the factory. |
|
AUTOMATIC systems designed and produced to handle heavy and/or big materials and equipments. They serve machines and entire production areas.
The systems permit to automatize the material (coils, bars, beams, tubes, etc) and the equipments (dies, etc) loading, unloading and stocking
Main operative features:
- Solution: from the top(automatic overhead bridge cranes, professional manipulators) and from the ground (shuttles)
- Max material weight: from 1 to 100 metric ton
- Max material dimensions: Without real limits
- Environment: All typologies of manufacturing industries, industries with heavy service, industries with heavy duty environments
Main functional features:
- Variable performances in function of the material typology handled.
- Use of market leader brand for all the automation components
- SCADA systems, for controlling and monitoring, verticalized for process typology.
- Management of the missions and of the execution priorities
- Full modularity and configurability of the control system
- Statistic and Historical reports
- Predisposition to bi-directional links with stocking and production systems (bus, network, hw signals).
- Predisposition to bi-directional links with company information systems (ERP, MES, MRP)
Hardware - Mechanical
The higher percentage of the solutions use specific overhead bridge cranes designed and produced in consideration of our experiences and of real process requirements.
They are equipped with all the right accessories in order to guarantee their correct operation regarding performances, precisions with the maintenance of a very high reliability and safety level. |
|
Demag DCL Compact Line:
Developed to meet practical needs, the new high-profile Demag DCL Compact Line features a number of innovations. With its new design, it not only looks good, it literally features more.
Demag DCL Compact Line is specified for currents up to 200 A at 60% CDF. The system is fitted with up to 7 conductors, as required, both for supplying mobile consumers with power as well as for transferring control signals in your facility.
|
|
Professional crane sets:
Our Crane sets offer outstanding quality, efficiency and reliability at the highest level. Every component reflects decades of expertise in all aspects of crane design. You are supplied with complete, tailored component packages for efficient single or double-girder and suspension crane solutions that save you time. Demag crane sets are based on standardised components for simple and user-friendly assembly on the Plug-&-Play principle. |
|
| The lifting capacity of STAHL CraneSystems single girder suspension cranes ranges up to 10,000 kg. Suspension cranes in neighbouring bays can be connected; the professional crane interlock functions completely free of jolts and knocks. The hoist suppliers can travel onto the neighbouring crane together with its load and can reach any destination in the interlocked system. |
|
STAHL CraneSystems is the specialist for high-performance cranes in the upper S.W.L. range. This naturally includes the double girder overhead travelling professional crane with an S.W.L. of up to 160,000 kg and a span of up to 30 m. Large, unwieldy loads can be handled extremely safely and accurately. This is particularly true when several hoists manufacturer equipped with a precise electronic synchro control are used in tandem operation.
The double girder overhead travelling crane can be integrated into planned or existing buildings utilising special installation variants. The top hook position brings particular advantages on a double girder overhead travelling crane. The load hook is lifted between the crane girders. Additional requirements such as maintenance platforms on crab or crane, cabins or higher crane travel speeds can be achieved quickly and easily.
|
|
Double industrial winch bridge cranes
for use in loading smelting industrial furnaces.
Main hook capacity 50 t
Auxiliary hook capacity 10 t
Hook lift 12 m.
Gauge (track width) 28 m
Hoisting speed 12 m/min.
Trolley speed 30 m/min.
Bridge glide speed 60 m/min
Class A7 M7. |
|
When it is a question of the safety of man and machine in hazardous areas, STAHL CraneSystems is pioneering, forceful and consistent.
The STAHL CraneSystems GmbH is regarded as a specialist for explosion protection world-wide. With our experience and our know-how from many decades, our own fundamental research and our own R&D, with approvals from the Federal Physico-Technical Institute (PTB) and other test institutes in many countries, STAHL CraneSystems occupies a special position in this field. All components of a professional crane or manufacturers of hoist are strictly from our own production, from motor and brake to control and switchgear.
This ensures optimum, high-quality explosion protection. The new rigorous ATEX regulations on mechanical explosion protection are of course met. STAHL CraneSystems was the first manufacturer of overhead material flow technology to implement the ATEX 100a directive 94/9 in its production programme. |
|
| Components for anti overhead travelling cranes deflagrating and anti sparks. These Components answer are Ex, in conformity with standard ATEX. Also available in zone 22. |
|
Cimolai Technology S.p.A. can design, fabricate, assemble on-site, test and supply (on a turn-key basis) the following sets of equipment:
- LAUNCHING GANTRIES for building steel and/or concrete bridges (using either beams or segments), say: Overhead Launching Gantries, Underslung Launching Gantries
- DERRICK CRANES designed for erecting steel or concrete bridges
- CANTILEVER LIFTING SYSTEMS, i.e. devices for lifting and positioning steel or concrete segments
- PORTAL CRANES on wheels or runways
- SHAFT CRANES, usually set to work in sites for the construction of dams or tunnels
- BACK-UP SYSTEM FOR TBM, i.e.: Systems for automatic feeding of the concrete elements forming the tunnel roofs to the positioning equipment; Erectors for automatic placing of the segments; Trolleys to transport the diggings or for personnel transportation inside tunnels (with catalyzed mufflers and particulate professional filters for operations in tunnels)
- AUTOMATIC WAGGON OVERTURNING SYSTEMS for the automatic overturning of waggons, used mainly at the exit of tunnels being build to discharge the contents of the waggons onto trucks or dumpers used to transport the diggings deriving from tunnel excavation |
|
Single or double girder gantry crane used for external environments or where don't exist right structural parts to install overhead bridge cranes
The Bonfanti's cranes are developed and produced in the respect of the ISO 9001 norms (TUV)
Main features:
- CE Certification
- Supplier of hoist capacity: from 2 to 60 metric ton
- Span: up to 40 meters with overhangs up to 30 meters
- Speed: different choices in function of the different service and capacity typologies
- Hook path: up to 30 meters
- Possibility to supply the gantry with one travelling unit positioned at the ground level and the other in quote, same as the overhead cranes suppliers
- Possibility to install on a single gantry professional crane:
- Two Industrial winches on the same trolley
- Two different winch trolleys
- One Winch and one auxiliary hoist on the same trolley
- Crane movements managed by inverter control
- Specific technical development in order to satisfy all the needed specifications
- Pendant pushbutton or professional remote control |
|
ITALGRU, in addition to its production of mobile harbour cranes and off-shore tower cranes, is also specialized in the design,
construction, installation and maintenance of hoisting systems with a wide range of capacities for use in various sectors of industry.
The equipment ranges from professional crane systems for iron and steel mills, to systems for shipyards, power stations and waste disposal.
Our expert technical department analyzes every request, and the features of every system to be offered and designed, then prepares
the project for construction by the well-trained production department, after which the system is assembled and tested.
Particular attention is devoted to after-sales services that, in addition to scheduled and unscheduled maintenance of the equipment,
carries out courses of training and instruction for the personnel . |
|
Cimolai Technology S.p.A. can design, fabricate, assemble on-site, test and supply (on a turn-key basis) the following sets of equipment:
- LAUNCHING GANTRIES for building steel and/or concrete bridges (using either beams or segments), say: Overhead Launching Gantries, Underslung Launching Gantries
- DERRICK CRANES designed for erecting steel or concrete bridges
- CANTILEVER LIFTING SYSTEMS, i.e. devices for lifting and positioning steel or concrete segments
- PORTAL CRANES on wheels or runways
- SHAFT CRANES, usually set to work in sites for the construction of dams or tunnels
- BACK-UP SYSTEM FOR TBM, i.e.: Systems for automatic feeding of the concrete elements forming the tunnel roofs to the positioning equipment; Erectors for automatic placing of the segments; Trolleys to transport the diggings or for personnel transportation inside tunnels (with catalyzed mufflers and particulate industrial filters for operations in tunnels)
- AUTOMATIC WAGGON OVERTURNING SYSTEMS for the automatic overturning of waggons, used mainly at the exit of tunnels being build to discharge the contents of the waggons onto trucks or tipping systems used to transport the diggings deriving from tunnel excavation |
|
A suitable professional crane system is necessary for simple and easy movement of loads with vacuum lifting systems and vacuum tube lifters.
The specially developed crane system made of aluminium complements the vacuum lifting system designed for an individual application!
Your benefits:
- Available as a single-beam or double-beam crane system
- Ease of movement -> extremely ergonomical operation
- Simple installation
- Low-cost crane solution
- Short delivery times (available ex stock)
- Very reliable
- Suitable for loads weighing up to 660 kg
Various sections permit the configuration of cranes optimised for weight, load and costs. |
|
Double girder overhead cranes with electric rope industrial winches fully designed and produced by Bonfanti.
The Bonfanti's cranes are designed and produced in the respect of the ISO 9001 norms (TUV).
Main features:
- CE certification
- Hoisting capacity: from 10 to 300 metric ton
- Span: up to 40 meters
- Service typology: the cranes and winches range is standardized to cover all the usage typologies (FEM classes: from M3 to M8) with all the capacities declared above.
Speed: Different choises in function of the capacity and of the service typologies
- Hook path: up to 30 meters
- Possibility to install on the same professional crane:
- Two Winches on the same trolley
- Two different winch trolleys
- One Winch and one auxiliary industrial hoist on the same trolley
- Crane movements managed by inverter control
- Crane overall minimized
- Pendant pushbutton or remote control
Hoisting capacities, hook paths or crane spans over that declared above are produced with specific design |
|
Low headroom offers optimal highest hook position
Optional electric slewing gear
Optional electric hoist travel
Optional mobile control (standard with wire rope hoists supplier) |
|
- Electric chain hoists from 160 to 5 000 kg
- Jib cranes from 80 to 2 500 kg
Tubular, inverted Profile, wall or pillar mounted
- Modular tubular system
- Vacuum carrying devices
Vacuum technology system |
|
The jib cranes made by Donati Sollevamenti offer the most complete range of solutions for the handling of loads up to 10.000 kgs, based on in-depth knowledge of the most varied applications and on more than 70 years of experience in lifting.
Mass production carried out with industrialized processes allows the production via economies of scale of completely reliable cranes which are tecnically innovative and offer excellent value for money.
The quality of the componets used and the excellent finish of the steel structures as well as the quality system certified UNI EN ISO 9001:2000 allows us to offer a product of superior quality, which is long-lasting and in line with the latest international regulation standards.
The jib cranes are part of the range of products for lifting built by Donati, the leading Italian company and one of the biggest at world level in the lifting sector. |
|
Slewing pillar cranes
- simple and robust construction
- GISKB I + II special profile
- simple installation
- for all industrial applications
|
|
1 - Simple or articulated jib crane :
Range: from 2 to 5 meters.
Charge of 0 to 600 kg
Height under iron from 3 to 4 meters.
On barrel or mural Fixing.
The jib professional crane can be equipped with a stabilizer with cable or a hoist manufacturer.
Example of handled products:
- Glazing, Panel of wood.
- Barrels.
- Reels.
- Paperboards.
- Castings.
- Bags.
- automobile Parts (limps speed, coils, doors, cap, seats, panel instrument...)
Specific hand of gripping on request.
Turnkey installation.
|
|
Triangulated, raised mural brackets or hollow rail.
Brackets on barrel triangulated, raised, speciaten or hollow rail.
Models out of brackets alone but also in packs (provided with electric hoist manufacturers and feeder)
And also a whole range of gantries... |
|
This typology of professional crane represents the ideal solution for the material handling, in the working area of the crane arm, in a specific workplace.
The Jib cranes are divided in two categories:
- Jib cranes with column
- Jib cranes at wall
JIB CRANES WITH COLUMN
The jib cranes with column have the main pillar fixed on the ground.
The jib crane for the industry is used to serve workplaces and handle materials with medium/low weight. Normally up to 2000 kg. The hoisting is realized with an electrical rope or chain hoist.
The trasversal movements (through the jib arm and its rotation) are done manually by the operator; is possible install motors for the both movements.
JIB CRANE AT WALL
This cranes are bounded to an existing structure (columns, pillars, walls, etc). The operative characteristics are same of the jib cranes for industry.
The Bonfanti's cranes are developed and produced in the respect of the ISO 9001 norms (TUV).
The main features are:
- CE certification
- Hoisting capacity: from 125 to 2000 Kg (jib crane for industry); up to 40 metric ton (jib crane for ports).
- Crane Arm length: from 2 to 7 meters (standard). Other dimensions are done on specific request. |
|
Technical data
- Mechanisms: Fem 9683/95, 9755/93, 10011/87, 9511/86, 9611/86, 9466/89, Uni 7670/88.
- Structural parts: CNR UNI 10011/88, 10028/85, 8634/85, 9671/88, CNR 10021/85, DIN 15401 - 15402, EN 287-1.
- Electrical parts: EN 60439-1, CEI 2-3/88 (IEC-34-1), CENELEC EN 60034-5 (CEI 2-16), CEI EN 60529, 60204-1, 55014.
- EC directives of conformity: 89/392, 91/368, 93/44, 93/68.
- Painting: 2 coats of zinc coat 40m each, 2 coats of finish 40m each
- Feeding voltage: 400 Volt 50 Hz.
- Insulation: Class F.
- Protection: IP54 Cenelec EN 6034-5. |
|
The most popular standard swing jib type can be supported by a floor support pillar or from a stanchion or wall mounted bracket.
All slewing jibs and articulated arm jibs can be suspended from vertical steel columns or from existing stanchions. In some professional cases these can also be fitted to professional building walls, although in this case (and in the case of the existing stanchion) the suitability of such is the customers’ responsibility. Mobile base plates are available for some slewing jib cranes. This professional crane can be transported using the clients’ fork-lift professional truck for use in different parts of the factory.
Alternative versions of the swing jib include the inverted design for restricted headroom areas.
Jib Lengths: 2 – 6m
SWL Capacities: 80kg – 2T
O/H clearance: generally 3.5m
Lifting hook Height: generally 2.9m
Manufacture: MS/SS304/Aluminium
|
|
|
|
Overhead traveling cranes, Gantries
