|
|
MODEL: ESET10 (Self-Propelled / Manual Pump Operation)
Capacity: 1000 kg
Max. Fork Height: 205mm
Fork Length: 1100 / 1150 / 1220
Fork Width: 520 / 550 / 685
Battery: 24 Volt (4 Batteries)
Charger: 12V / 10A
Turning Radius: 1574 / 1624 / 1694mm
Travel Speed (with Load): 2.6 - 3.8 km/h
Net Weight: 143 - 156 kg
|
|
Capacity of load 1000 Kgs.
Length of pitchforks of 1150 mm.
Exterior width of pitchforks from 520 / 560 and 680 mm.
You roll directives and rollers of Nylon, Vullkollan, Gum.
Versions with finished galvanized or unoxidizable steel.
Brake of immobilization in the foot for transport in trucks, peep-holes or I stop by means of handle in the helm for decrease of pronounced(marked) ramps.
Rapid elevation.
Rollers of lateral support.
|
|
Hydraulic and electrohydraulic stackers in versions painted, galvanized or stainless, Different lifting capacities from 1000kgs to 2500kgs.
|
|
MODEL: ECO " MINI " Low-Profile Pallet Truck
Capacity: 1500 kg
Lowered Fork Height: 51mm
Maximum Fork Height: 165mm
Width over the Forks: 540 / 685 mm
Fork Length: 1150mm
Individual Fork Width: 160mm
Steering Wheel: 180x50 dia. (Polyurethane)
Load Roller Tandem: 50x70 dia. (Polyurethane)
Turning Radius: 205 degrees
Recommended for handling conventional pallets, skids and containers that are low for the standard 75mm lowered height
|
|
Survey pallet of the type NIVO PIK ref. VNF
Apparatus allowing the loading of a pallet the level of the ground per pallet truck or forklift truck and to have a movement of rise to keep an ergonomic position lasting the loading or unloading of the pallet
Charge with 250 to 1500 kg
Assembled control/descent by knob with maintained contact
Side or frontal loading
Electrohydraulic rise
Électropiloté valve fixed on the cylinder
EC normalizes
Option:
dimensions of the plate or the forks
|
|
It is designed to transport pallet units between parts of a transport line, which have different transport heights. It consists of a robust pillar with guide profiles, along which a trolley moves up and down. The trolley is hung upon a roller chain over a cog-wheel of the driving unit. It carries a chain or roller conveyor section. An electromotor of the main drive is controlled by a frequency converter, which allows high lifting speed without starting shocks or noise.
Application: For all usual pallet units.
Load capacity: Up to 2.000 kg.
Transport speed: Up to 500 mm/s.
|
|
If you use open bottom containers or skids, now you can transport and palletize with a single unit. Loads can be adjusted up and down at the touch of a button. They feature:
- Extra rugged construction
- 1,600 pound first stage capacity
- Infinite height adjustment within the working range
- Internal battery charger and battery discharge indicator
- Ergonomic contoured handle and group controls for operator convenience
- Dual front casters to absorb the shock of uneven surfaces
- Auto locking casters to prevent movement when unit is in the raised position
|
|
Innovative solutions for heavy load handling from 0.1 to 100t
The heart of our lift systems are the original WINKEL Combined Bearings, proven for more than 25 years in heavy load handling up to 100 t. Rigid, low maintenance and cost effective.
More than 25 years experience in the design of rigid and cost effective lift systems.
Economical unit construction system, proven for many years.
State of the art design in 3-D with PRO-ENGINEER.
High qualified staff in designing and production.
All systems designed for continuous use and low maintenance.
Complete lifting systems from a single supplier
Deliveries incl. documentation and fast spare parts delivery.
You have the task - we have the quick solution.
High flexibility on customer demand.
|
|
Capacity: Kg 2000
Total Lift Height: mm 200
Lowered Height: mm 85
Fork Length: mm 1150
Fork Width : mm 540 / 705
Raised Height: mm 200mm
Truck Weight: Kg 100 - 110
OPTIONS: Single or Tandem Rollers
Also available with Printer Option
|
|
The RAVAS-1 is the ideal entry model for anyone who wants to experience the advantages of mobile weighing. At 575 EUR (advisory list price) the RAVAS-1 offers a weight indication in 5 kg steps, with a tolerance of + 20 kg.
The RAVAS-1 is based on a completely new, patented technical concept. There are no changes at all to the pallet truck forks, which retain their original dimensions. This guarantees easy entrance into low or closed pallets.
The RAVAS-1 is meant for general check weighing, at goods reception, when determining shipping weights, for preventing overloads and for safety checks. Since there are no components installed in the forks, the pallet truck scale is virtually indestructible. This also makes it suitable for very rough applications, e.g. in production areas or on board lorries.
|
|
RAVAS-1100: weighing pallet truck for a reasonable accuracy
The RAVAS-1100 is the cost-conscious solution for checking weights a few times a day, e.g. at goods reception or when filling out transport documents. Weights are shown in 1kg steps.
Thanks to the robust chassis and the power supply by four standard AA-batteries, this pallet truck scale combines an attractive price level with a reasonable accuracy. The display is able to show both gross and net weights. For checking incoming goods, avoiding overloads and determining shipping weights.
|
|
The RAVAS-110 is the cost-conscious solution for checking weights a few times a day, e.g. at goods reception or when filling out transport documents. Weights are shown in 2 lbs steps.
Thanks to the robust chassis and the power supply by four standard AA-batteries, this pallet truck scale combines an attractive price level with a good accuracy. The display is able to show both gross and net weights and calculate total weight per shipment. For checking incoming goods, avoiding overloads and determining shipping weights
|
|
Type: PM20W
Special: Weighing
Capacity: 2000 kg
Forks: 1150 x 555 mm
Steering wheels: Polyurethane
Single/Tandem: Tandem
Fork wheels: Polyurethane
Optional: printer
|
|
PEP 400
PEP 400 is a multi-scale controller consisting of a TER 400 data handling terminal systematically connected to one or more combined STA 400 intelligent modules and REP 400 adjustment modules. In association with 1 to 4 dosing structures, the assembly measures and adjusts a continuous flow of bulk products, and delivers a constant throughput in accordance with the displayed set value.
Functions include:
WEIGHING SIMPLE ADJUSTMENT WITH INTEGRATED AUTOMATIC DOSING
- 3 operating modes (local, manual, slave)
- fault groups
- blend process control
- filling control / automated discharge
PRESELECTION
PRINT-OUT
COMMUNICATION
ACCESSORY functions:
- pulse vibration control
- filling and discharge alarms
- slave level detector
|
|
Multi-range graduations
The RAVAS-2100 is a hand pallet truck with all basic scale functions. Suitable for all accurate check weighing.
Gross/net weighing, zero correction and an adding memory for calculating the total weight per shipment or order. If a printer is installed, both separate weights and total weight are printed on the ticket.
|
|
The RAVAS-310 is an advanced hand pallet truck scale with extended scale functions, such as a piece counting program and the possibility of adding an article or client number to each weight. The RAVAS-310 has a built-in printer and is standard NTEP approved legal-for-trade.
In addition to basic weighing functions, the RAVAS-310 offers a piece-counting program with manual entry or sampling of the piece weight, and has the possibility of entering a client or article number that is printed with date and time by the integrated printer. This makes the RAVAS-310 suitable for counting parts, (automatic) mixing and dosing, invoicing and for communicating weight data to a PC or wireless network.
|
|
QUICK LIFT (Q.L.) PALLET TRUCK
(Lifts 200 kg. in only 5 strokes)
From 200-2000 kg in normal 10 strokes
MODEL: ECO Q.L. (" Quick-Lift ")
Capacity: 2000 Kg
Overall Fork Width: 520 / 540 mm
Overall Fork Length: 1150mm
Rasied Height: 190mm / 200mm
Lowered Height: 75mm / 85mm
Available in Single and Tandem Rollers
|
|
Based on a special design incorporating standard components, our die carts on rails can be adapted to suit various application needs. For example, they can be equipped with custom loading extensions or lifting devices.
* die Xchange time: 5 min
* repeatable Xchange time
* built-in safety mechanism, movements are monitored via optical sensors
* dedicated to one press
* when the cart is combined with die staging tables, Xchange may commence while press is still running
* powered electrically and hydraulically, the cart operates completely exhaust-free
|
|
Manipulator of coil
charge up to 300 kg
Stainless or aluminum
Height of lifting until 2230mm
Rechargeable battery with built-in charger.
specific gripping on request.
|
|
Built with the operator in mind
Crown rider pallet trucks are the product of choice when it comes to high-speed transporting for maximum productivity. Their compact size and cost give them practical, fit-for-the-task advantages over a fully featured counterbalanced truck. And, with a host of safety and comfort features, such as side-sit/-stance positioning, this range is ready to meet the needs of any operator for long-haul transporting.
|
|
|
|