|
|
| Products 121 to 150 of 345 |
The distinguishing feature of Vetter Mini Lifting Bags 8.0 bar/116 psi is the noiseless, jolt-free, and smooth lifting of the heaviest loads. They lift, push, press, prise and split, even on sloping surfaces. The surface profile improves grip on slippery ground such as grass, sand etetc.
They are produced in two versions. Both versions have a multi-layer construction which covers each side of the bag. This is either steelcord or aramide reinforcement.
|
|
Lifting devices
Lifting - Freeing - Cleaving
Mustlift is able to lift safely heavy loads on the ground or in water. Their compact size, allowing to place them quite everywhere, is obtained by a simple vulcanization of a high resistant elastomer coated fabric. They can be used on irregular surfaces thanks to their positive grip surface.
Mustlift lifting bags can be inflated with air or water at maximum 8 bar.
High-pressure flat lifting bag, made from coated fabric (polyester or aramid) vulcalized in one operation. Lifts up to 76 T in the standard range. Anti-slide coating
|
|
Various ranges of swing bars for glass, wood, sheet and the marble.
Consult your outline dimensions on our Internet site www.seral.fr
|
|
Mansaver® model G1118 lifting beams are primarily used for handling standard two ton chlorine cylinders, widely used in water treatment and other industrial processes.
This style of beam is also readily adapted for use in other similar type cylinder lifting applications.
|
|
|
Wood's Powr-Grip manufactures a full line of rotators, tilters, rotator/tilter combinations, vertical and C-frame vacuum lifters, in styles for glass installation or glass processing. These AC, DC or air-powered vacuum lifters move windows and large lites with the aid of forklifts, cranes or overhead hoists. Every Powr-Grip vacuum lifter is equipped with many features to enhance worker safety, such as vacuum gauges with colored zones to indicate whether vacuum is sufficient for lifting. Indicator lights and warning buzzers likewise signal when a vacuum lifter is or is not ready to move the glass
|
|
A whole range of lifting tongs known as "a grip for each application":
grips with sheet, grips for sensitive sheets (stainless, aluminum....), of the grips for shaped (horizontal position, vertical, with great capacities of gripping), of the lifting tongs of piles of sheets, the magnetic handles and manual grips, the grips for blocks of stone or concrete, of the grips for balls (straw, fibers, paper...), of the grips for wood panels, of the grips with tubes or for sheeting piles (BTP), of the grips with edges, the forks with pallets, the grips with cases, grips with rounds, for lathes of cables, of the hooks for reels, containers, of many barrel grips...
|
|
1. Designed for vertical plate lifting.
2. Positive grip c/w locking mechanism.
3. Hardened steel knurled cam ensures maximum grip and hold.
4. Easy to replace wear parts.
5. Minimum maintenance.
|
|
|
The grip arm TBS with the cardanic mounting is noticable in different positions at the sheet metal. It can put up from the horizontals, from which Senkrechten raise placings or with lateral notice over the edge. By the sliding bevels of the swiveling eye a sufficiently high Klemmkraft is always present. Here the load-carrying capacity reduces according to the following load diagram. This also with a safety locking equipped sheet metal grip arm adheres by the pre-loading also to the lifting property if him no traction power affects. It locks the jaw for easier setting in the opened position. Apart from the transport of sheet metals the grip arm with swiveling eye is outstanding suitable also for turning Stahlund welded structures.
|
|
Dalmec offer a wide range of manipulators designed for the “weightless” handling of cardboard boxes, packaged wooden cases, products covered in film (polythene, shrink - wrap etc….).
Simple to use, they allow the operator to move a whole variety of packaged products, cardboard boxes and wooden cases quickly, accurately and safely throughout the working area.
Boxes can be picked either with suction tooling or with a pneumatic gripper head. Vacuum is created by either by an electric generator or by a ”Venturi” ejector.
The type, design, dimensions and picking system of the manipulators offered are tailored so as to suit the specific requirements of the user and to the varying environmental conditions available.
|
|
Handling attachment with vacuum pad. Indicated for handling of cardboard boxes or parcels.
It is the quickest and economic way for this kind of handling.
Vacuum generation by electric vane pump.
Max capacity 180 kg.
Accessories: quick disconnection for suction pads, angular adaptor, flexible extended manouvre handle, etc.
|
|
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
Lev 300
Capacities :
Grip width between 400 - 800 mm Lift height up to 3,00 m Max load = 300 kg up to 1,70 m Length of forks : 570 mm and 720 mm with sliding plates.
Description :
The LEV 600 and the LEV 300 have been designed to convey loads that cannot be handled with a conventional stacker. They are particularly suited for moving loads sitting directly on the floor
|
|
With Protema lifts, difficult and potentially harmful lifting can be avoided and an ergonomic method of moving goods can be achieved. The first Protema lifter was developed in 1977. Today’s third generation lifts are a result of years of practical experience and development. Industrial kitchens, pharmacies, libraries and manufacturing companies use electric lifts to lift boxes, rolls, reels and other goods.
Lifting boxes
Protema lifts are manufactured with an emphasis on functionality, flexibility and reliability. They are lightweight, low-maintenance and battery driven with a built-in charger.
|
|
Dalmec has designed and manufactured hundreds of industrial manipulators with special toolings for the handling of products having different forms, weights and dimensions in the wood - furnishing sector.
The photo illustrates two manipulators Partner type, overhead trolley mounted version, with adjustable pinch jaws tooling for the handling of armor-plated main doors.
|
|
Lev 300 hinged forks
Capacities :
Max load on LEV 600 = 600 kg Max load on LEV 300 = 300 kg
Description :
Designed to lift rolls using the machine shaft these hinged forks can be used with a roll clamp to lift, turn and load rolls. The forks are fitted with vee blocks to stop the load from slipping.
|
|
Lifting system with pivoting spindle, special lifter for uptake of foil rolls
Spindle gripper system with tensioning spindle and arbor for lifter – 90° foil roll rotation.
Simplifies handling of foil rolls.
Light pivoting from vertical to horizontal and vice versa.
Saves working time and reduces costs.
Material: stainless steel 1.4301.
Surface: glass bead-blasted.
Not suitable for Ex-zones.
Dimensions: 876 x 500 x 1840 mm
Lifting height: 1500 mm
with pivoting spindle
Spindle diameter: 76 mm
Battery voltage: 24 V
2 fixed load-bearing wheels: Ø 80 mm
2 castor rollers with locking brake: Ø 125 mm
Weight: 135 kg
Load-bearing capacity: 125 kg
|
|
Lifting rolls and reels
Protema lifts have been successfully marketed around the world for many years. During that time we have experienced just about every problem regarding manual lifting. Therefore we will almost certainly have a lift for your every need. Roll and reel lifting is very often carried out with an electric lift.
|
|
Lifting technology
Handy telescope model
• stabilized movement of loads
• precise positioning of the loads
• lifting of eccentric loads: no problem
• suspension attachment to suit custom built hoisting accessories
|
|
Telescopic lifting devices are lifted and lowered by inside or outside running chains of electrically driven Demag chain hoists. They are available with two different design principles. Either with square masts as square section telescoping units (TV) or with round masts as round section telescoping units (TR). Both variants are available with single telescoping sections as well as double telescoping sections.
Telescoping units are particularly suitable for handling heavy workpieces up to 1,000 kg and they can take up large moments of up to 1,500 Nm. Depending on the design, strokes of up to max. 2,000 mm are possible.
They can either be fitted in a Demag KBK rail system or on a KSL pivot arm with pillar mounted on the floor.
They can also be used in low buildings with double telescoping sections.
|
|
Assembled according to your schedule of conditions, the Mobirail® systems adapt to the configuration of the workstation for an easy handling of the loads (from 75 to 1500 kg) by the operators.
Available in 2 ranges:
- profile hollow rail steel and
- profile hollow rail aluminum.
Combinable with wish according to the degree of expected performances.
Easily integrable pendular systems in any type of building.
Complete program of accessories and adjustable suspensions.
|
|
- LIGHT SPREADER FOR ISO CONTAINER HANDLING
- OPEN / LOCK DEVICE IS FULLY AUTOMATIC
- WIRES INCLUDED
- DESIGN APPROVED BY GL
- AVAILABLE WITH GL / BV INSPECTION CERTIFICATE
- VERSIONS : 20' y 40'
- FULLY MANUAL VERSION ALSO AVAILABLE
TARE: 1000KG
Material: STRUCTURAL STEEL
SWL : UNDER CUSTOMER REQUIREMENT (UP TO 40T)
FINISHED : SANDBLASTED + SHOPRIMER + PINTED
- OPTIONS:
CORNER GUIDES
FORKLIFT POCKETS
|
|
Mechanical Scissor Block Grabs
McQuaid Engineering ltd Manufacture a full certified range of Mechanical Scissor Block Grabs designed to carry all types and sizes of Kerbs, Bricks and Blocks
The Grabs can be attached to Forklifts, Telehandlers, Cranes and Excavators.
Our range of mechanical scissor block Grabs include 3 models
GT15 is designed to lift half bale /44 blocks, GT30 is designed to lift full bale / 88 blocks and the GT30 UNI is designed to lift either half bale or full bale, depending on the size of the bale all our grabs can be customised to suit the Load.
By design our block grabs have a semi automatic gear system (Guard Protected) that alternates to engage and release loads with limited manual handling .
Also they have large rollers that ensure the grab locates / centres on the pace or bale on every lift
|
|
Bushman AvonTec designs and manufactures a complete line of tongs for lifting and moving a wide range of industrial loads. We design each tong for the size, shape and weight and special conditions in your particular application.
Bushman AvonTec coil lifters are designed and manufactured according to the latest revisions of ASME Specifications B30.20 and BTH-1, Design of Below-the-Hook Lifting Devices.
Model M2055 Motorized Lay Down Ingot Tong
This special mill duty ingot tong (or ingot lifter) lifts ingots from a vertical position and lays them down horizontally. The lifter legs have rotating pads mounted on an inclined plane to increase gripping pressure. A cam behind the pads provides locking to protect the load.
|
|
Liftings units PRONAL are used for raising or stabilising submerged loads during refloating opérations . Our standard range provides lifting capacitiesof 100kg to 8 tonnes.
The units are made of high strength, PVC-coated fabric.
They are fitted with inflation devices and a quick-release pressure relief valve that is essential when raising loads.
|
|
Industry: Multiple Industries
Application: Multiple Applications including Track or Roller Mounted Loads
Function: Push / Pull / Maneuver Reversible
Max. Speed: 18 m/min
Air Pressure: 6 bar
Air Volume: 1000 lt/min
Weight: 49 kg
|
|
TILTING TABLE
Table specially designed to tilt vertically or horizontally at 90°C, any parts and more specifically paper or metallic coils. In most of cases, one plate is plain and the other one is equipped with a "V" shape plate. This equipment is useful for any kind of load whatever its shape : cylindrical, cubic,...to be assembled, maintained, checked....
Main options : manual blocking device or hydraulic to maintain load, powered rotating plate, manual or powered travels on rails, hot deep galvanization, metallic wiremesh protection around the perimeter of the tilting table, radio-controls....
FOR ANY SPECIFIC REQUEST, WHATEVER THE TILTING CAPACITY, CONSULT US.
Fields of application :
Any kind of parts or equipments requiring to be tilted in a production, assembling or packing processing line.
|
|
|
Loading arm to double clearance for trucks and rail tankers, especially adapted to the cisterns multi tanks. The transfer operations can be done some is the positioning of the cistern compared to the plunger tube of the arm. The external tube struggles horizontally on 360° thus making it possible to reach the various domes of the cisterns multi tanks. The arm is folded up with the vertical in position rest with its principal tube and its plunger tube.
|
|
Example of composition of unloading/Filling shift including/understanding:
1/ A complete metal structure and platform
2 arms of the 263R type, heated, with recovery of vapors
3 a footbridge with flap of the type PA4 (4 steps of width 800mm with arch of safety of 1500mm X 1500mm)
4 a control control cubicle with automat controlling the transfer operations
For the station (Photo attached) the loading arm is equipped with an suction tap of the vapors released during the loading, with a probe of detection of level anti-overflow and with a reheating with double envelope vapor or thermal oil.
|
|
- HYDRAULIC, PNEUMATIC AND MECHANIC.
- CLAMPING LOG CARRIAGES.
- Under exclusive licence of HMC U.S.A
- Equipped with MUDATA systems.
|
|
The manual lifters of the MaxX series represent an ideal solution for moving ferrous loads in an economic, rapid and safe way.
They are available in a range between 125kg (275 lbs) to 2000 kg (4400 lbs) capacity. Safety factor 3.
The radio-controlled Bat-Grip lifters are useful to handle loads with a remote control, without power supply connection.
They are feeded by a standard battery, with high capacity.
In fact the electricity is used only during MAG and DEMAG phases, keeping the battery level up for a long time (around 1 week charge).
EM modules for bundles: Electromagnetic modules with capacity up to 8 tons.
They allow to clamp bundles or packs of rounds, sections, sheets and other ferrous loads already strapped.
|
|
|
|
Special handling and lifting tools
