|
|
| Products 181 to 210 of 345 |
|
|
|
|
Permanent magnets TPM
100 to 1000 kg
Tools very simple to use, the permanent magnets are especially designed to transport in a fast and economic way of the ferromagnetic loads.
The major uses are found in the warehouses and workshops, the steel constructions, the shipyards and in the manufacture of gauges, tools, moulds,...
Their small dimensions allow many applications, as well of loads punts as round.
The magnet allows a capacity of lifting on very weak weights (by respecting a mini thickness of the part to raising).
Magnets TPM are available in 5 models of 100,300,500,800 and 1000 kg.
They are easy to use in reduced spaces of operation.
Characteristics
- The permanent magnets do not require electrical energy
- The operations of activation/desactivation "ONE" and "OFF" are easily carried out thanks to the lever of safety. When the magnet is in function, the lever is blocked in a sure way thanks to a system of locking and the magnet cannot be accidentally disunited load.
- The selection of the suitable magnet must be made in consideration surface qualities of the load, type of load to be raised, its dimensions and its thickness.
|
|
PERMANENT LIFTING MAGNETS
Dust- and waterproof permanent lifting magnets can work outside in any weather.
Permanent lifting magnets don't need power supplies, magnetization and demagnetization occur due to turn of the handle.
Lifting magnets have small overall demensions and weight in comparison with electromagnets.
Magnets can keep cargo indefinitely long. They are served by one person and have a threefold capacity margin from nominal.
|
|
Manually / electronically switched high-power neodymium permanent magnet lifters.
Simply hook to your hoist or crane and you're ready to go. Lifting awkward and heavy loads (up to 10000kg) becomes a one man job.
Easy to install
Easy to use
No power required (except electronically switched)
No running costs (except electronically switched)
Safe
Efficient
Range of sizes
Lift round and flat loads
Lift up to 10000kg safely
|
|
|
|
|
|
SafeHold® Permanent Lifting Magnets
Lift up to 10,000 lbs (4,536 kg). Compact permanent magnets lift and transfer steel and iron without slings, hooks or cables. Properly installed and operated, provide greater safety than other mechanical material handling devices.
Magnets possess a unique property of attraction which can be harnessed to ease and speed one's work. The payoff is an immediate improvement in efficiency and operating economy.Magnets lift and transfer steel and iron of any weight and shape without slings, hooks or cables--and without marring the surface. They require fewer operators and helpers, and when properly installed and operated, provide greater safety than many other mechanical materials handling devices.
Making the most efficient and economical selection of lifting magnets (whether electro or permanent-whether single magnet or multiple arrangement of magnets) to pile, to unpile or to lift and move steel plate and shapes requires a full knowledge of the application.The factors that have bearing on the lifting magnet selection for any specific application are:
- Weight, shape and area to be lifted- Surface condition of load and magnet
- Stiffness or flexibility of load- Range of sizes and shapes to be lifted by the magnet or magnets
- Interpretation of magnet lifting power when less than full magnet face is utilized Eriez specialists are always available to consult on your specific needs-whether it's for a single magnet or a series of magnets engineered into an efficient materials-handling system that reduces your costs
|
|
MANUALLY SWITCHED PERMANENT LIFTING MAGNETS
In places where no power supply is available, these manually switched magnets are extremely suitable. By means of muscle power this magnet can be switched on and off. These magnets are suitable for round or flat material and have a safety factor of 3.5.
|
|
|
|
|
|
Applications:
You can use H-LIFT permanent magnets as load handling magnets at various workplaces - in production and assembly areas or outdoors. We offer 7 sizes with load capacities from 100 kg to 6000 kg which you can use for both round and flat material in your applications.
Benefits
Low operating costs
High level of safety and reliability
No residual magnetism
Independent of the mains supply for use anywhere
Lever control with integrated safety feature to prevent accidental switch-off
Require little maintenance
Operating principle / Technical details:
H-LIFT permanent magnets operate independently of a power supply. Due to the specific arrangement of a group of permanent magnets, the magnet field lines act on the magnet pole and the load, or are deflected in the magnet housing so that the poles are not magnetised. In position "ON", the magnetic field lines are guided via the poles through the load. The magnet is active. In position "OFF", the magnet pole surfaces are neutral and the magnet is therefore switched off. The load lifting magnet consists of individual standardized components. The inside of the magnet comprises the actual magnet system consisting of a reversing magnet system, the magnet assembly and the magnet poles.
|
|
|
|
|
|
The manual lifter of the MaxX Tecnomagnete series represent an ideal solution for moving ferrous loads in an economic, rapid and safe way.
RAPID
With the simple motion of a lever, the magnetism lifts, transports and releases the load with extreme rapidity, needing only a single operator. It does not compress or deform the load, rather, it allows plenty of motion even with limited spaces.
SAFE
Once activated, a spring-loaded device blocks the manoeuvring lever, thus preventing any possible accidental deactivation. The technique defined as neutral crown will not permit interference with the original state of the permanent magnets, thus allowing to obtain maximum results in terms of safety and reliability.
ECONOMIC
The Tecnomagnete manual lifters are based on the technology of permanent magnets, therefore do not need electrical feeding. They are resistant to usage: the only movable component present is a rotor which is centred on ball bearings. This in turn develops neither physical contacts nor any friction during the rotation phase. Within normal working conditions they can be “maintenance free” over a long period of time.
|
|
Magnetic Lifters
WALKER MAGNETICS lifter's range is typically dedicated to flat and cylindrical workpieces.
|
|
The Eagle Lift® utilizes state of the art technology to make a powerful, lightweight permanent lifting magnet. Our exclusive Test Talon® feature allows an operator to safely test load feasibility and a deep "V" notch between the pole shoes allows greater stability when lifting round stock.
- Permanent Magnet; does NOT require electricity
- Smooth Lever Action between Off & On positions
- Bi-Polar capabilities enable the unit to lift both flat and round stock safely
- Safety factors exceeding industry standards
- Single hand operation
- Very little residual magnetism at OFF makes lifter positioning easier
- Portable, compact and lightweight
- 3 Year Warranty
- Made in the USA
|
|
Features:
- Ideal for handling steel plate, forgings, die castings and similar items in machine shops, warehouses and industrial processing plants
- Non-marring Roller Cam Release Mechanism requires less torque to release parts
- Lift Magnets eliminate the need for slings, clamping devices or chains
- No electricity required for operation of magnet
Lift magnets are the proven solution to simplified machine loading and unloading, eliminating the need for slings, clamping devices or chains. One person can use these magnets to perform tasks previously requiring two or more people. Ideal for handling steel plates, forgings, die castings and similar items in machine shops and warehouses. Non-marring roller cam release mechanism requires less torque to release parts. No electricity required.
|
|
Safe two-handed operation
Easily exchangeable lifting eye lifting eye
High safety factor (>3)
Sturdy construction
Slim, light design
|
|
Please ask for the most advantageous price conditions for items delivered from our stocks.
Hand-controlled lifting Magnets
Ensures speedy and secure transport of goods to be lifted, such as sheet metals, soft cast iron blanks, steel constructions, etc. The permanent magnetic construction of the lifting magnet ensures safe and permanently available magnetic force. The lift is indicated in triple security. No external sources of elctricity are necessary. Two pole pieces ensure a continuously minimal air gap, even if the work pieces are round.
|
|
|
|
|
|
CM-400, CM-800 TOTERS
The TOTER is a compact, self-contained, lifting magnet which uses permanent magnets that maintain holding power indefinitely. Within the steel housing are powerful ceramic magnets whose field is controlled by the "on-off" position of the handle. Because no electric power is required, TOTERS can operate completely free of the restriction of power cords, and can be used where electric power is not readily available.
Recommended Applications
Permanent lifting magnets require good surface conditions to achieve maximum lifting.The TOTER is ideally suited for in-plant handling, loading, and unloading machine tools, and is commonly found in industrial plants, machine shops and warehouses.When greater holding capacity is required, refer to our battery magnets or our circular electric magnets.
Rated Lift Capacity
The maximum rated lift is based upon lifting clean, smooth, flat, low-carbon steel plate, 1 1/2" or thicker with the full area of the magnet's lifting surface in contact with the load. Derating is required for plates with rust or scale, plates thinner than 1 1/2", and alloy steels. More detailed ratings are contained in the OPERATOR'S MANUAL AND SAFETY INSTRUCTIONS.
|
|
Use these pneumatic tilters anywhere that shop air is available. They require no electrical power and because they use no hydraulic fluid there is no chance of process contamination.
Features:
- 2000 - 6000 lb capacity
- 30 degree tilt standard, 35 degree tilt optional
- Air requirements 80 psi @ 15 cfm
- Pedestal mounted control standard
- Foot control available
- Optional floor stand
- Safety restraining chain to guard against over tilt
- Optional fork pockets
- Lifetime warranty on Firestone Actuator
- Optional motion stabilizer
- Custom designs available
|
|
PRONAL has developed and maketed palletising grippers made from hot vulcanized elastomer-coated fabrics.
They are used by the glass industry for handling bottles.
PRONAL can also supply special palettising grippers using the same manufacturing technique.
Please give us a call : we shall study your requirements
|
|
Flexgrip®
Simtech offers a wide range of gripper tubes & pneumatic gripping bars for the palletisation and depalletisation of any kind of articles.
All grippers can be mounted on our standard gripper heads.
|
|
Hoist point Zasche Z-Top spin
The Z-Top spin is a hoist point to pneumatic controls, used for the ergonomic displacement of loads in the vertical direction. It perment a rigid guidance of the load and a position offset of this one compared to the cart. The Z-Top spin is d%u2019une use very comfortable, the control of the movements being able to be done with the hand. The Z-Top spin consists of profiles out of aluminum, d%u2019où a low mass and an easy handling.
Guidance is a guidance d%u2019acier duricé and sharpened in the capacity as machine tools. Thanks to cart with linear ball bearings lifting can be carried out by simple manual push.
The mechanism uses a mobile pneumatic cylinder.
In standard version, our hoist points are designed for the following load capacities:
Z-L 6 600 Nm 160 kg
Z-L 12 1.200 Nm 300 kg
|
|
Tool Change Rack - DUNKES Check-Lift System
Tool weight:
* up to 5000 kg
Plants/Systems
* Combined presses for blanking and drawing methods inc. tool ba and automatic loading and unload
|
|
The PPS can be mounted to the back or side of the press. In many cases it is fixed permanently, but swing-aside and even mobile versions are also available. Configuration and layout are flexible, allowing the system to be adapted to virtually any environment
* die Xchange time 15mn
* accurate, repeatable positioning
* stroke up to 2,40 m
* built-in safety mechanism using sensors to monitor movements
* ready for full electric control, optionally with appropriate switching module
|
|
* easy snap-in lock
* one pair is suitable for up to 3 tons per metre
* light-weight construction
* low rolling friction
* optional height-and-leve-adjustable mounting brackets allow use with different presses
|
|
ROLLBLOC Die Loading Arms extend the press bed to make room for quick, safe die transfer.
Even the heaviest dies can be moved with little effort precisely and safely.
Swivel die loading arms with flanged attachment
When not needed, these arms are swung aside. Various versions to adapt to the available space.
Overhung version and bridge version die loading arms are mounted in fixed mounting hooks when needed. This attachment technology allows the arms to be used on several presses.
|
|
KUZ= retractable ( single fold )
KLUZ = light version, retractable
KUZF = retractable ( two folds )
KUZK = retractable for short coupling systems
Types
- 750 KUZ
- 1000 KUZ
- 1500 KLUZ
- 1500 KUZ
- 2000 KUZ
- 2500 KUZ
- 3000 KUZ
- 1000 KUZF
- 1500 KUZF
- 2000 KUZF
- 2000 KUZF (BDF)
- 1500 KUZK
- 2000 KUZK
|
|
- REVOLVING HOOK TO BE LIFTED WITH A FORKLIFT FOR GENERAL CARGO
- SPECIALLY DESIGNED TO HANDLE REELS.
- ALSO AVAILABLE WITH A SUPPORT TO BE STORED WHEN NOT USED.
- SWL = 30Tn IN THE STANDARD VERSION
- TARE = 2.85 Tn
|
|
Apparatus: INCLINEUR OF CAR
Used in the demolition contracters, this apparatus makes it possible to incline with 90° a VHU thus making it possible the operator to intervene on the lower part to dismount the low fixing of the engine, to dismount the trains, the exhaust and all other parts accessible by the lower part.
easy to use, leaving the access under the car in full safety without any risk of fall being given the absence of frame in the working area.
Apparatus developed in étroute collaboration with an approved organization and thus conforms to the European regulations.
|
|
This appliance server to tilt heavy containers and skeleton containers from which material is to be taken: Thus the material is easily reached. No more strenous bending when taking parts out of deep containers, as the tilting angle 0-90°. The appliance is handled like a pallet truck, i.e. it is also possible to transport containers. The container tilter is deliverable with 12 V,230 V, 400 V power pack or with footpump. All appliances have a tilting angel up to 90° and wheels with Ø200/80 mm.
Dimensions: Length 1230 mm, Width 740 mm, Fork length 820 mm, Fork width 550 mm.
|
|
TILTMATIC: Pendular dumper of coil.
- Tiltmatic is conceived to be charged coil flat (vertical axis) directly by the forks of the forklift truck.
- The crutch of swing associated with the translation with Tiltmatic generates the rotation of a quarter of lathe of the coil during the first part of the race.
- The last part of the race of Tiltmatic engages the coil on the chuck of the decoiler.
Performances: Taken coil by its always identical internal diameter what allows a fixed height of loading on the decoiler.
- REVERSIBILITY OF THE SYSTEM: an unfinished coil is given flat (vertical axis) while making the opposite way.
Simplicity: Only one travel engine allows the swing of the coil and its engagement on the chuck.
Note: engagement on the chuck is not possible that if the bits are suitably positioned. The expansion of the chuck releases the spindle (hook) of Tiltmatic.
|
|
- Lev 600 Roto-Bobine
- Roll Clamp
- Lev 300 hinged forks
- Roll clamp external grip
- Lev 300 Roto-Bobine
- Lev 300 boom
- Core clamp vertical grip
- Cable drum turner
Cable drum turner
Capacities :
Max load (on LEV 600) = 350 kg (on overhead hoist = 500 kg) Max width = 540 mm Max outer diameter = 720 mm
Description :
Designed to lift and rotate cable drums. This unit can be used on the LEV 300 - 600 stackers or with an overhead hoist.
|
|
Bushman AvonTec manufactures a wide variety of custom engineered lifting devices to meet the roll handling needs of the paper, textile and other industries. This equipment is custom designed to perform a wide variety of operations safely and efficiently while preserving the integrity of even the most fragile roll.
Bushman AvonTec lifting devices are designed and manufactured to meet or exceed the latest revision of ASME Spec. BTH-1: Design of Below-the-Hook Lifting Devices.
|
|
Southworth manufactures a wide variety of equipment for lifting, positioning and transporting large, heavy rolls and coils. From Coil Cars to Roll-Upenders to Tilt Down Tables, southworth has a product for every roll handling or coil handling application.
LS Style Coil Cars
Ideal for smaller/narrower coils
Opposed Cylinder Style Coil Cars
Move coils weighing up to 70 tons
L Cam Style Coil Cars
Move coils weighing up to 20 tons
Roll Upenders
Reorient rolls and coils for transport or loading
Tilt Down Tables
Ideal for loading or unloading rolls from processing machines
|
|
Floway® track
Roller tracks from Interroll have what it takes to convey featherweights as well as heavy weights, reliably and qui etly from the input end to various order-picking stations – year in, year out, maintenance free. This combination of features is truly unique. The staggered arrange ment of the components increas es the load capacity of our roller tracks even further.
This unique track is the only one in the world that incorporates qualities from all the other tracks on the market today. Also it is the only track
designed not to open; even under heavy loads.
- Floway® track cannot open under heavy loads.
- High capacity rollers made from High Density polyethylene.
- Electro-zinc plated profile that will not distort under a load.
- Bearing, rotates on steel stub axle.
- Operating temperature: –31°F to 104°F/–35°C to 40°C.
-Max. load per bearing, static: 26 lbs / 12 daN, dynamic (moving 1.6 f/s / 0.5 m/s): 18 lbs / 8 daN.
|
|
|
|
Special handling and lifting tools
