|
|
Warning: Models HTS with Max >= 3.000 kg only available on pallet
10 tare memory units, 10 unassigned memory units, e.g. for weight increments or identification numbers, summation storage, adds up all individual weighing processes (TOTAL)
Charge condition indicator for rechargeable battery, visual by means of LED
Adjustment program CAL. External test weights available at an additional price
Rechargeable battery pack internal, standard. Operating time approx. 150 h, charging time approx. 15 h. Models until incl. Max = 1.500 kg internal, through mains adapter, For models from Max = 3.000 kg external. Batteries can be reordered at any time
Luminescent LED display. The intensity can be adjusted in 2 stages to preserve the battery. Models with Max until 1.500 kg incl., digit height 25 mm, with Max from 3.000 kg, digit height 30 mm
Infrared remote control standard. Range approx. 15 m. All functions are selectable. Input via numeric key pad, incl. protective case WxDxH 200x80x28 mm, batteries Size AA (2 x 1,5 V) included
Hook with safety catch, revolving
Standby function. Automatic switch-off of the display after 5 min without a change of load. Reactivation of unit with the touch of a key |
|
Around the world, cranes are used to load ships, vehicles and containers. Casting and charging cranes handle material flows in foundries and steelworks. These materials must be frequently, reliably and accurately weighed, and without any delay.
Schenck Process supplies the perfect solution: electromechanical crane scale systems for all required classes of accuracy, customised for specific projects and applications, from systematically planned standard solutions through to customised design. |
|
Chatillon crane scales and dynamometers deliver optimum performance for weighing tension, traction and weight. We offer mechanical and digital readout scales that are ideal for industrial applications, warehouses, shipyards, terminals, etc.
|
|
- A compact measuring device for weighing loads during lifting.
- Appropriate tackle can be attached to assist in the lifting and weighing.
- The crane weighters have a liquid crystal display(LCD),which can tare as well as show either the gross or net loads.
- It also indicates the load protection at 110% of the gross weight and the status of the battery.
- Conforms to CE safety standard. |
|
90 Series Verti-Karrier Drum Lifters
Use 90 Series hoist attachments to grab and lift your drum. Then move and place your drum almost anywhere.
Load a drum to and from remote or hard-to-reach areas
- Attach the Verti-Karrier drum grab to your hoist or crane
- Move drum lifter and lower onto the top of drum
- As the drum grab is elevated it grips drum automatically
- When the drum is lowered to the ground, the drum grab carriage drops down and automatically locks in the open position, releasing the load
- The Verti-Karrier drum grab is then ready to lift another drum
The grip will not disconnect until drum is fully down. You only need to operate your hoist to guide drum grab into position. This saves operator time and protects against dangerous climbing.
Capacity: 1,000 Lb. (454 kg). Each 90 Series Verti-Karrier is load tested at the factory at 125% of rated capacity as per American National Standard ASME B30.20 and a load test certificate is enclosed with each unit.
Morse Verti-Karrier Drum Lifter Series are NOT for drums without lids or tops in place. |
|
4-Wheel Drum Trucks
Ergonomic Drum Trucks to move and dispense a heavy drum with ease.
Morse 160 Series 4-wheel drum hand trucks.
The Model 160 4-Wheel Drum Truck is our best selling drum truck for good reason. The innovative design provides extra safety, ease of use, and versatility.
With this ergonomic drum truck you can load and unload a heavy drum with ease and move a drum quickly and easily in narrow aisles. The four wheels fully support the drum's weight, so maneuvering is easy. It turns on a dime too.
You can move a drum onto and off pallets, and position a drum for dispensing. When you're done, the drum truck stands upright by itself for space saving storage.
Handle drum
14" to 28" (36-71 cm) in diameter
31" to 41" (79-104 cm) tall
55 or 30-gallon steel drum
85-gallon salvage or "overpack" drum
Rimmed plastic drum
Fiber drum with sufficient rim recess for hook engagement |
|
Drum trolleys 300 kg (optional: 1 or 2 supporting castor wheel in rubber)
Drum trolleys, welded tubular steel, powdercoated, RAL blue 5007, durable surface protection. Wheels either with solid rubber tyres 250 x 60 mm or pneumatic tyres 260 x 85 mm, hubs with roller bearings. Suitable for all rimmed 200 litre drums.
Capacity: 300 kg
Height: 1600 mm
Total width: 680 mm
Guarantee: 5 years |
|
PE05/PE10/PE20
Capacity from 0 to 20 tons
The range EP is a pusher and an electric tractor designed to meet the needs for handling of the industrialists and professionals. |
|
They are designed for sheets with thicknesses starting from 4mm.
The model TM4, equipped with 4 permanent-electro cross-beams, is able to lift loads up to 12m lenght and weight up to 20 tons.
The TM6 version, equipped with 6 cross-beams, is able to work with loads up to 16m lenght and 25 tons SWL.
The hydraulic system allows high precision and reliability in time.
The same permanent-electro magnetic technology used in the TM model, but installed on a more economical fixed beam.
Capacity up to 10 tons, max load lenght 6m.
Allow to handle sheets from vertical position (stacks) to horizontal (machine bed) and vice versa.
Permanent-electro magnetic modules for profiles handling.
The modules are installed on a fixed beam, in tailor-made configurations with 2/4/8 pieces.
Fixed beams for laser / plasma cutted pieces.
The special shape and layout of the permanent magnets allows to handle the cutted pieces.
|
|
BAT GRIP
3 Ton capacity permanent-electro lifters with battery.
Equipped with a remote control, this lifter is capable to be used for a long period independent of the power supply (est 7
days), because the energy is only used for a fraction of a second during the MAG/DEMAG phase. |
|
Features:
Cold Operation
Since the electrical current is only used momentarily, no insulation or coil failures are caused by internal heating.
Safer Holding
The permanent magnetic material is unaffected by external power failure. Since Electro-Permanent magnets require electricity only to activate the magnet "on" or "off", there are no mechanical parts that could accidentally stick. Once the magnet is "on" the electricity can be disconnected indefinitely without any interruption to the holding power.
Cycle Time
Energizing the magnetic material typically takes 2-3 seconds.
Power Consumption
Operating costs are very low compared to conventional electromagnets because the power is applied for a minimal time. |
|
Lightweight, durable bladder chucks make running large and/or various sized cores quick, easy, and safe.
|
|
| DX type expanding shafts are made of aluminium with an extruded profile or may optionally be made of steel or ERGAL, a special aluminium alloy which allows a 30% approximately increase in the shaft's capacity without increasing its weight. |
|
KF = standard foldable lift 4 cylinder
KFL = foldable with only 2 lift cylinders (previous: HFL)
KLF = light foldable (4-cylinder)
KFN = standard foldable 4 cylinder for refrigerated vehicles.
Types
- 1000 KF
- 1000 KFL
- 1000 KLF
- 1000 KFN
- 1500 KF
- 1500 KFL
- 1500 KLF
- 1500 KLFN
- 1500 KFN
- 2000 KF
|
|
| The lifting clamp is removable loading gripper equipment used on a lifting apparatus for lifting and transporting individual flat. Loading capacity max Kg. 1000. The thickness of the glass plates can be from 4 till 55 mm. |
|
Pneumatic rope balancer with pneumatic expander for stators.
Max capacity 80 kg.
Work radius up to 7 m.
Available also with tilting or roating devices.
|
|
| A practical way to handle 200 L capacity drums without dammaging them. Grip is secure even on surface that are not perfectly flat. Gripping and releasing are controlled automatically from the driver's seat. |
|
Use these below the hook drum carriers with your hoist or crane to control the pour of drum contents, rather than simply dump the entire contents with a drum inverter.
* 185 and 195 Series below the hook drum tilter to pour drum above operator reach.
* 85 Series drum tilter for pouring within operator reach. |
|
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required. |
|
Automated roll handling, combined with MEGTEC's 'no operator presence' flying pasters offer significant benefits to web printers to improve their overall productivity and return on investment.
Paper represents 50-70% of total web printing costs. Even a small reduction in paper waste can yield a significant cost saving. Manual roll handling can be a major cause of waste resulting from damage to rolls in transit to the paster, excessive slab waste, and the moving and storing of unwrapped rolls on the floor. Poor splice preparation resulting in a web break is another avoidable waste cause. Measurement of roll, wrap, slab and core waste allows paper consumption to be monitored.
MEGTEC pioneered 100% 'no operator presence' roll changing and since its introduction has resulted in dozens of installations running successfully even in extreme operating conditions.
|
|
TILTMATIC: Pendular dumper of coil.
- Tiltmatic is conceived to be charged coil flat (vertical axis) directly by the forks of the forklift truck.
- The crutch of swing associated with the translation with Tiltmatic generates the rotation of a quarter of lathe of the coil during the first part of the race.
- The last part of the race of Tiltmatic engages the coil on the chuck of the decoiler.
Performances: Taken coil by its always identical internal diameter what allows a fixed height of loading on the decoiler.
- REVERSIBILITY OF THE SYSTEM: an unfinished coil is given flat (vertical axis) while making the opposite way.
Simplicity: Only one travel engine allows the swing of the coil and its engagement on the chuck.
Note: engagement on the chuck is not possible that if the bits are suitably positioned. The expansion of the chuck releases the spindle (hook) of Tiltmatic.
|
|
Southworth manufactures a wide variety of equipment for lifting, positioning and transporting large, heavy rolls and coils. From Coil Cars to Roll-Upenders to Tilt Down Tables, southworth has a product for every roll handling or coil handling application.
LS Style Coil Cars
Ideal for smaller/narrower coils
Opposed Cylinder Style Coil Cars
Move coils weighing up to 70 tons
L Cam Style Coil Cars
Move coils weighing up to 20 tons
Roll Upenders
Reorient rolls and coils for transport or loading
Tilt Down Tables
Ideal for loading or unloading rolls from processing machines |
|
HANDLING AND STOCKING CRANES FOR HEAT TREATMENT PLANTS
Verticalized systems to handle and stock material inside the execution of the heat treatment process.
The Bonfanti's systems are designed and produced in the respect of the ISO 9001 norms (TUV).
Main material features of the material:
- Max weight: up to 60 metric ton
- Max dimensions: without a real limit
- Superficial temperature: up to 1200 °C
These cranes are specially designed to operate in aggressive environments particularly in terms of the temperatures. They are equipped with all the necessary protections for the environmental temperature
and for the thermal radiations generated by the material during his handling after a thermal cycle.
Typologies of use:
- Manual
- Semi-automatic and/or automatic (on request)
The supply include:
1) Complete crane
2) Under-hook equipment to keep material (pliers, forks, etc)
3) Optionals:
- Automation system (in case is requested the semi-automatic or automatic functionality)
- Management and control system
- Link with external equipment (heater, cooling baths, loading and unloading bays, etc)
- Link with management systems (ERP, MRP, MES)
- Material dimension control equipments |
|
The range of Gohin Messain lifting equipment is suitable for all activities and can be developed according to your needs.
It is very much a question of mechanics: fixed or rotating head, single or double telescopic arms, lifting supports with fixed or retractable ferrule, etc. The lifting equipment can be made complex for performing the most intricate of tasks.
|
|
Lifting tongs for steel products
The Slingofer hoisting tongs handle any kind of hot and cold steel products, be it ingots from the continuous casting or finished steel coils from the warehouse. Other models are dedicated to the handling of equipments in a steel production plant, such as rolls, electrodes, pallets etc. |
|
|
|
Special handling and lifting tools
