|
|
| Products 91 to 120 of 245 |
Application : Specific inox chain system to lift radioactive loads
Location : Nuclear Industry
Force ( kg ) : 3400
Speed ( mm / s ) : 35
Stroke : ( mm ) 2785
Product in use : A special inox Chain 60D |
|
PRONAL lifting cushions can be used to lift loads of over 70 tonnes and are particularly useful in areas such as civil protection, security and defence.
They are also used in maintenance operations on construction sites and in various industries for moving, blocking and handling operations... Made from elastomer-coated fabrics, the cushions are vacuum vulcanised at a temperature of 140°C, thus ensuring that they are extremely tough.
Advantages :
- easy to install, thin when empty,
- uniform lifting power,
- high degree of control during lifting, progressive lifting process,
- high lifting force.They are also used for maintenance purposes on site and in industries for some operations as moving, stalling, handling...
|
|
The distinguishing feature of Vetter Mini Lifting Bags 8.0 bar/116 psi is the noiseless, jolt-free, and smooth lifting of the heaviest loads. They lift, push, press, prise and split, even on sloping surfaces. The surface profile improves grip on slippery ground such as grass, sand etetc.
They are produced in two versions. Both versions have a multi-layer construction which covers each side of the bag. This is either steelcord or aramide reinforcement. |
|
To be able to achieve a maximum lifting movement with only a minimum insertion space available, lifting bags are the appropriate tools to use. With 12 models, Holmatro has a lifting bag for every job. Thanks to their unique low profile edges the lifting bags can easily be inserted under all circumstances.
The deflated height of our lifting bags is 22 or 25 mm. Using compressed air (maximum 8 bar), the largest model, the HLB 67, reaches a maximum inflation height of 520 mm. Another feature of the lifting bags is their ability to adjust to the lifting surface. The applied pressure is divided over a large surface compared to the use of hydraulic jacks. |
|
Slings and load suspension equipment from STAHL CraneSystems facilitate lifting and transporting loads where more than one hook is required. The broad spectrum permits practical solutions and particularly safe connections between load and load hook. Robust and long-lived, they follow the accustomed rigorous quality of all STAHL CraneSystems products.
STAHLplus is the direct mail order range of accessories and material flow technology for crane and logistics: slings and accessories, grabs, lifting beams, load cells and load securing equipment. These are accompanied by comprehensive consultation on site, the mobile testing service and the free information service.
|
|
A whole range of lifting tongs known as "a grip for each application":
grips with sheet, grips for sensitive sheets (stainless, aluminum....), of the grips for shaped (horizontal position, vertical, with great capacities of gripping), of the lifting tongs of piles of sheets, the magnetic handles and manual grips, the grips for blocks of stone or concrete, of the grips for balls (straw, fibers, paper...), of the grips for wood panels, of the grips with tubes or for sheeting piles (BTP), of the grips with edges, the forks with pallets, the grips with cases, grips with rounds, for lathes of cables, of the hooks for reels, containers, of many barrel grips... |
|
~ The new CY clamp is based on our successful 92 series range of clamps and incorporates the new universal hinged hookring.
~The CY Hinged Universal Plate Clamp has been developed especially for the handling of plate at any angle thus permitting the awkward lifts previously considered hazardous.
~ Suitable for all structural steel up to 300 Brinell surface hardness. |
|
- Vertical lift and turn objects in one smooth operation.
- Hardened steel jaws for secure is grip, and cam mechanism engages as vertical pressure is applied to hook ring. |
|
ROUND LIFTING MAGNETS
Electromagnets are intended for lifting mechanisms to catch and shift the cold ferromagnetic loads: scrap metal, charge, cuttings, metal bars, pigs, slabs, etc.
These lifting electromagnets can operate on the traverse.
Electromagnets are recommended for installation on light and mobile excavators such as FUCHS, LIEBHERR, ATLAS, SENNEBOGEN, CAT, ZEPPELIN, KOVROVETS etc. complete with a generating control system and a special traverse that ensures the use of an electromagnet without removing the grab.
All electromagnets can be produced as heat-resistant (to lift loads of the temperature as high as 600°C) and for underwater works. |
|
Safely lift and move steel without direct attachment by slings, hooks or cables. Complete line in both permanent and electro designs with various models, sizes and strengths to handle many different lifting jobs.
SafeHold® Permanent Lifting Magnets
Lift up to 10,000 lbs (4,536 kg). Compact permanent magnets lift and transfer steel and iron without slings, hooks or cables.
Selecto® Electro Lifting Magnets
The SL Series requires a compact Eriez variable-voltage rectifier controller or a fixed voltage rectifier to furnish the desired D.C. power from any A.C. source.
Bi-Polar Lifting Magnets - Rectangular
Specifically designed to provide greater contact and holding strength on castings, forgings, plates and structural shapes.
Bi-Polar Lifting Magnets - Square
Especially deep field provides greater holding on steel coils, bundles of bar, re-bar, tubing or pipe.
Rectangular Lifting Magnets
Three standard models, and lengths from nine inches (229 mm) to 96 inches (2,438 mm), allow you to size the magnet to the job. Eriez' smallest single unit has a holding power (with no safety factor) of 1,860 (845 kg; the largest, 38.8 tons (35,240 kg).
Circular Lifting Magnets
Eriez circular lifting magnets are general-purpose magnets with many applications. |
|
The use of electro & permanent lifting magnets offers the following advantages:
- Speed, simplicity and the damage-free transport of workpieces of various
shapes and lengths.
- The possibility of precisely positioning the workpiece to be lifted
- Saving valuable storage space and manpower
All magnets can be supplied with electronic control. The control is equipped with an IGBT that switches the current to the magnets. Both voltage and current can be set at, for example, 80-100 and 120% for lifting, transport and compression.
|
|
The manual lifter of the MaxX Tecnomagnete series represent an ideal solution for moving ferrous loads in an economic, rapid and safe way.
RAPID
With the simple motion of a lever, the magnetism lifts, transports and releases the load with extreme rapidity, needing only a single operator. It does not compress or deform the load, rather, it allows plenty of motion even with limited spaces.
SAFE
Once activated, a spring-loaded device blocks the manoeuvring lever, thus preventing any possible accidental deactivation. The technique defined as neutral crown will not permit interference with the original state of the permanent magnets, thus allowing to obtain maximum results in terms of safety and reliability.
ECONOMIC
The Tecnomagnete manual lifters are based on the technology of permanent magnets, therefore do not need electrical feeding. They are resistant to usage: the only movable component present is a rotor which is centred on ball bearings. This in turn develops neither physical contacts nor any friction during the rotation phase. Within normal working conditions they can be “maintenance free” over a long period of time. |
|
CM-400, CM-800 TOTERS
The TOTER is a compact, self-contained, lifting magnet which uses permanent magnets that maintain holding power indefinitely. Within the steel housing are powerful ceramic magnets whose field is controlled by the "on-off" position of the handle. Because no electric power is required, TOTERS can operate completely free of the restriction of power cords, and can be used where electric power is not readily available.
Recommended Applications
Permanent lifting magnets require good surface conditions to achieve maximum lifting.The TOTER is ideally suited for in-plant handling, loading, and unloading machine tools, and is commonly found in industrial plants, machine shops and warehouses.When greater holding capacity is required, refer to our battery magnets or our circular electric magnets.
Rated Lift Capacity
The maximum rated lift is based upon lifting clean, smooth, flat, low-carbon steel plate, 1 1/2" or thicker with the full area of the magnet's lifting surface in contact with the load. Derating is required for plates with rust or scale, plates thinner than 1 1/2", and alloy steels. More detailed ratings are contained in the OPERATOR'S MANUAL AND SAFETY INSTRUCTIONS. |
|
~ Each ratchet component is forged from pure alloy steel
~ Handle is designed loose using self-locking one-way bolts allowing easy removal of unwanted debris such as mud, snow or ice
~ Proof tested to 50% of the minimum breaking strength
~ Gears are permanently welded to the barrel |
|
Material: Carbon Steel C1045
Finishing: Powder Coated
Heat Treated: Quenched and Tempered
Minimum Breaking Loading: 3.5 Times to WLL
Packing: Carton then Steel Pallet
Forged Lever Load Binders
Forged Load binder Ratchet type
Ratchet Type Load Binder without Links or Hooks
Lever Type Load Binder with Claw Hooks
Indirect Load Binder
Spring Load Binder
Lashing Lever Tension Lever
Lashing Chains, Long Link
Chain Hooks
All Kinds Of Welded Chains
Cargo Straps, Truck Lashing, Tension Goods
Load Binders are frequently used in the offshore oil industry to secure loads on trucks at the dock and to secure material on the back deck of a vessel heading out to a platform or rig.
There are two types of binders found in the offshore environment, the Lever type load binder and the second the ratchet type load binder. Any tool can cause serious injury if not used properly.
Load binders are no exception. The ratchet type can increase the leverage or pull on the chain over a lever type. They are rated according to the size of chain for which they have been designed. The lever type has a mechanical advantage of 25 to one while the ratchet type has a mechanical advantage of 50 to one.
|
|
| Stowing sling assemblies : A wide choice of 25mm, 35mm, 50mm and 75mm wide textile slings, straps with ratchets are available from stock. |
|
Liftings units PRONAL are used for raising or stabilising submerged loads during refloating opérations . Our standard range provides lifting capacitiesof 100kg to 8 tonnes.
The units are made of high strength, PVC-coated fabric.
They are fitted with inflation devices and a quick-release pressure relief valve that is essential when raising loads. |
|
- HYDRAULIC, PNEUMATIC AND MECHANIC.
- CLAMPING LOG CARRIAGES.
- Under exclusive licence of HMC U.S.A
- Equipped with MUDATA systems. |
|
The manual lifters of the MaxX series represent an ideal solution for moving ferrous loads in an economic, rapid and safe way.
They are available in a range between 125kg (275 lbs) to 2000 kg (4400 lbs) capacity. Safety factor 3.
The radio-controlled Bat-Grip lifters are useful to handle loads with a remote control, without power supply connection.
They are feeded by a standard battery, with high capacity.
In fact the electricity is used only during MAG and DEMAG phases, keeping the battery level up for a long time (around 1 week charge).
EM modules for bundles: Electromagnetic modules with capacity up to 8 tons.
They allow to clamp bundles or packs of rounds, sections, sheets and other ferrous loads already strapped.
|
|
for quick application in close space!
- Multi-layer design with Armid material.
- Fill time with 8 bar within seconds.
- Extensive accessories, like suitable case etc. |
|
MAGVACU® COMBIGRIPPER
The MagVacu® combigripper uses a combination of magnetic and vacuum techniques for the handling of (perforated) sheet up to a thickness of 12 mm.
Re-tooling for different products is not necessary so that more types of products can be handled on unmanned machines. The Combigripper is also twice as powerful as, and safer than, conventional vacuum systems. The magnet pulls the steel plate onto the vacuum suction cup so that it fits neatly onto it. This means that no vacuum can leak away around the edge of the suction cup
The universal combigrippers can be used:
in automated processes on laser cutting machines
in press brakes and press transfer systems in
the car and sheet metal work automotive and plate processing industries
|
|
Vacuum spiders SSP
Tailor-made complete systems for individual applications
The vaccum spiders SSP are suitable for use in the following applications:
- Chaining of robots in press shops and bending lines; automation of plastic, injection moulding and deep-drawing machines; machining centers for wood and plastics; water-jet, laser and
punching and nibbling machines
- Commissioning in stockrooms and distribution centers with the aid of industrial robots or portals
- Typical applications include the handling of metal sections, sheets, stones, car bodywork parts, glass and ceramic parts, solar panels and non-rigid objects |
|
Save energy and cut costs
MPH offers the most advanced energy-saving transfer ladles available. It's a ladle capable of transferring molten metal relatively long distances while maintaining temperature. No standby heat source is required for preheating.
Energy efficient
The refractory combination employed in the construction of the ladle and the use of an insulated cover minimizes heat loss through the shell while hot metal is being transferred. This low heat loss results in the ability to actually lower the temperatures of the metal in the central melter.
Additional energy can be saved during standby, There is no need to use gas or electricity to keep the ladle hot. The refractory has excellent resistance to thermal shock.
Negligible metal loss
Since the ladle is never overheated, it does not generate any oxides. Metal losses are reduced since neither the central melter nor the holding furnaces need to make up for lost temperature.
Reduces downtime
When properly used, this ladle eliminates the need to wait for the holding furnace to "recover" temperature lost during hot metal transfer. Nor is it necessary to wait until the ladle is preheated before it can be used.
Low maintenance
In normal use, oxides do not adhere to the refractory walls or the ladle. It can be skimmed easily. The refractory can be patched easily when required. |
|
Space restrictions, a frequent concern in web installations, can often be overcome by turning the web to allow for stacked equipment. However, conventional turner bars or sweat rolls require physical contact which can damage the web surface and cause web creasing. MEGTEC offers a better solution - MEGTEC Air-turns.
MEGTEC Air-turns use a cushion of air to float the web as it is turned. No surface-to-surface contact is required. Productivity improves because marking and other contact-related defects are eliminated. Air-turns are a safe, effective and reliable method for changing web direction.
They can be designed to operate smoothly at web tensions as low as 0.25 PLI and as high as 5 PLI. The unit's lateral sectors permit selective air pressure adjustment across its entire width, allowing the air turn to compensate for cambered webs and uneven tensions. A sensor automatically adjusts supply air to maintain consistent web-to-surface clearance. The result: excellent transport with no drift or flutter.
|
|
|
|
Special handling and lifting tools
