 |
 |
Evaporator exchange coil 28CB Carrier Commercial Systems and Services
8LA and 28CB direct-expansion evaporator coils provide efficient cooling for furnace systems when matched with Carrier’s 38ARZ condensing units. These versatile coils can easily accommodate upflow or horizontal light-commercial...
 |
 |
Air cooled aftercooler 7.5 - 37 kW | HAA SMC PNEUMATIC
Can cool high temperature compressed air from compressors down to 40ºC or less...
 |
 |
Water cooled aftercooler 8 - 1 600 l/s, 10.5 - 20 bar | HD Atlas Copco Compresseurs
Atlas Copco HD water-cooled after coolers are designed to combine a high level of cooling with economic water consumption. The air leaving the compressor is cooled...
 |
 |
Engine and transmission oil cooler Bowman
Bowman Engine & Transmission Oil Coolers are equally suitable for cooling torque converter, automatic transmission...
 |
 |
Cooling tower 10 - 75 ton | E1 Conair
Conair’s E1 series forced draft, counterflow cooling towers are rust-proof, not just rust-protected. We’re so confident the molded...
 |
 |
Water cooled aftercooler 8 - 1 600 l/s, 10.5 - 20 bar | HD, TD series Atlas Copco Compressors
Atlas Copco’s after-coolers, whether cooled by water (HD) or air (TD), are reliable, require minimum maintenance and provide trouble-free protection against the costly effects of water in your system....
 |
 |
Air/air heat exchanger max. 1 200 °F (650 °C) | SP ECLIPSE
Exothermics SP Sinusoidal Plate Heat Exchangers are the flagship products of the Exothermics line. Our exclusive sinusoidal plate design provides maximum effectiveness...
 |
 |
High temperature heat pipe 150 °C | TMS series EDWARDS
The Temperature Management System (TMS) is pipe heating and insulation that ensures condensable by-products from semiconductor processes remain gaseous until they reach the...
 |
 |
Oil cooler max. 140 l/min, max. 300 bar | Hydrapak series GARDNER DENVER
Lightweight, compact Drum oil cooler, combining the reservoir, filter, control and safety equipment required in a hydraulic...
 |
 |
Liquid cooler max. 150 l/min | FWKS HYDAC
The FWKS is a compact, complete fluid-water cooling system for cooling and lubrication circuits. This system is primarily used as a temperature-controlled intermediate circuit. The advantage of an intermediate circuit is that the system or the parts being cooled do not come into contact with the actual...
 |
 |
Air cooled heat exchanger John Crane
Eliminates Cooling Water Requirements Features - 5/8" O.D. x 0.065" wall continuous coil for reduced pressure drop - No cooling water required - Allows use in remote locations and eliminates the costs associated with water treatment -...
 |
 |
Liquid-air radiator 100 - 4400 kW | AlfaBlue Reverse BR Alfa Laval
AlfaBlue Reverse forced-draught air-cooled radiators can be used to cool water or...
 |
 |
Spray cooler max. 2000 microns | SC GEA Niro
GEA Niro's spray cooler SC is very flexible and characterized by its ability to produce a spray cooled powder according...
 |
 |
Dry cooler 7 - 525 kW Emerson Network Power
Liebert Outdoor Drycoolers provide closed-system cooling for pumped glycol heat-transfer fluid, supporting effective data center cooling design. Liebert Outdoor Drycoolers are available in...
 |
 |
Dry cooler 20 - 870 kW | FC/FI NEOSTAR Heatcraft Europe : Friga-Bohn - HK Refrigeration -
FC NEOSTAR "City" : Compactness and high efficiency. FI NEOSTAR "Industry" : Low pressure...
 |
 |
Water cooled aftercooler 17 - 3 389 cfm, 152 - 290 psi | HD 4-96 ATLAS Copco Compressors USA
Atlas Copco’s after-coolers, whether cooled by water (HD) or air (TD), are reliable, require minimum maintenance and provide trouble-free protection against the costly effects of water in your system....
 |
 |
Air cooled aftercooler 10 - 4 800 scfm Kaeser Compressors
Highly efficient air-cooled aftercoolers from Kaeser are an economical way to remove water vapor...
 |
 |
Air/air heat exchanger IVX series Hitachi Air-conditioning & Refrigeration Division
The KPI fixed type air exchanger brings fresh air into the air conditioned space. Depending...
 |
 |
Dry cooler 0.7 - 30 kW | AERO series EURODIFROID
DESCRIPTION Dry coolers AERO are in conformity with CE standards. In their standard design, they are made of ; Refrigeration circuit 0 Copper tube and aluminium...
 |
 |
EXAIR's Adjustable Spot Cooler is a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. With the turn of a knob, you can select...
 |
 |
High-performance electronic cooler FIFO TOWER C Ersa GmbH
With the FIFO TOWER C, Ersa expands its product range by an efficient cooling unit which functions on the first in first out principle. The FIFO TOWER C allows for a homogeneous and effective cooling down of electronic assemblies,...
 |
 |
Liquid-air radiator 30 - 900 kW KEB
The Modular Cooling Concept The frequency inverter and servo drive KEB COMBIVERT offer a modular heat sink concept to adapt to mechanical and thermal conditions in different applications: Convection Heat Sink This is the compact standard design including additional ventilation....
 |
 |
Heat pipe heat exchanger Mersen
High heat losses from Press-Pack and IGBT power devices can be spread to large area cooling banks via heatpipes. Typical construction employs copper heatpipes and aluminum or copper “Evaporator” and “Condensor” sections. If electrical...
 |
 |
Hydraulic motor air/oil heat exchanger max. 160 kW | LHC series OLAER INDUSTRIES
The coolers of technology air/oil for capacities of cooling...
 |
  |
Air cooled aftercooler for compressed air 60 - 4 500 m³/h, max. 16 bar | RA 10/750 OMI Italy
The widely sized heat exchanger and powerful electrical forms permit to lower compressed...
 |
 |
Air/oil heat exchanger max. 35 bar | S Series OMT
S STANDARD SERIES OMT air/oil heat exchangers have been designed to be used on the return line of the hydraulic systems....
 |
 |
Air/water heat exchanger FIRA series BONDIOLI PAVESI
The Bondioli & Pavesi radiators for endothermic motors are designed according to customer needs and are used on tractors, self-propelled cranes, forklift trucks,...
 |
  |
Dry cooler 8.5 - 1 120 kW | Power line THERMOKEY
THERMOKEY presents a new series of liquid coolers (dry coolers) called “POWER-LINE” featuring various fin geometries in different modules using new materials and a new design. This newly born...
 |
 |
AC motor powered air/oil cooler 12 - 330 kW | AKG-Line A AKG
AKG-Line is a standard line of products from the market leader in high performance aluminium cooling systems. AKG is best known for it's world-wide presence. German engineering and extremely...
 |
 |
Dry cooler 9.8 - 187 kW | SOLAR Junior G Fincoil
Dry cooler series includes 18 sizes, for both horizontal...
 |
 |
Air/water heat exchanger Hoffman
POWERLEAN™ In-row Cooling Units Application • Small to large data centers • Wiring closets • Server rooms Features • Close-coupled solution utilizes chilled water to remove IT heat load •...
 |
 |
Air/oil cooler 160 kW, 40 °C | LAC Fawcett Christie Hydraulics
AC Industrial Coolers (LAC) - Coolers with AC motors for industrial hydraulic systems The LAC air oil cooler with single-phase or three-phase AC motor is adapted for...
 |
 |
Cooling tower AEC, Inc. - ACS Group
Pump tank assemblies feature stainless steel reservoirs and full sized valving. Custom engineered systems are available with single or double compartments...
