pneumatic ejector
pneumatic ejector
2BV

The ejector is equipped with an integrated full pneumatic control circuit which shuts off the air supply when the preset max vacuum level is reached and restarts when reaching the min level. This enables compressed air savings of more than 95 %

See the other products
AVAC Vakuumteknik
DC torque motor / compact
DC torque motor
VRAD 506

VRAD Products can Function as Torque Motors ScannerMAX VRAD actuators may perform well in the role of a limited-angle torque motor. Torque motors, (sometimes called torquer motors, or simply torquers) are a special class of motor, that ...

DC torque motor / brushless / compact
DC torque motor
BLPCM series

Torque: 0.1 Nm - 30 Nm
Diameter: 200 mm

Pancake motors are used in applications where the whole system needs to be as compact as possible. They are mounted directly on the load, thus reducing and greatly simplifying the mechanics and eliminating backlash. They withstand extreme ...

DC electric torque motor / synchronous / permanent magnet
DC electric torque motor
HTQ 120 series

Torque: 3.2 Nm - 10 Nm
Power: 270 W - 720 W
Rotational speed: 450 rpm - 800 rpm

MAGNETIC torque motors HTQ series are permanent magnets synchronous motors designed for industrial machines integration. They have been specially engineered to achieve the higher and higher performances required in the automation field ...

See the other products
MAGNETIC Srl
AC electric torque motor / synchronous
AC electric torque motor
RDD series

The developed torque motors are equipped with a fixed or moving hollow shaft and offer an extremely high performance spectrum. Constant precise movements and positions can be achieved at high continuous and peak torque in combination ...

AC torque motor / three-phase / 3-phase / hollow-shaft
AC torque motor
BRL series

Torque: 13 Nm - 630 Nm
Rotational speed: 250, 500, 1,000 rpm
Diameter: 135, 200, 270, 480 mm

Servomotor for direct coupling with torque from 1 Nm up o 1000 Nm hollow shafts with trough hole or tapped end hole. Motor are aviable also without transducer.

See the other products
ACM engineering
DC torque motor / synchronous / direct-drive / compact
DC torque motor
KTY-F series

Torque: 6.5 Nm - 50 Nm
Rotational speed: 250, 400, 500 rpm

Our new KTY series of housed synchronous torque motors not only sets a new benchmark with regard to maximum drive system torque and stiffness, but they are also extremely compact. The KTY series is a useful alternative to geared motors ...

DC torque motor / synchronous / permanent magnet
DC torque motor
SKA series

Torque: 50 Nm - 2,000 Nm
Rotational speed: 90 rpm - 800 rpm

Torque motor technology is an innovative solution of the direct motion and allows very high torque at low rpm. Featuring a remarkable stall torque capacity plus high acceleration values, SKA achieves efficiency and precision positioning ...

See the other products
SELEMA S.r.l.
hydraulic lift piston
hydraulic lift piston
ø 60 - 120 mm, 16 - 51 kg/m | 1001 SL series

Direct acting at side 1001 SL jack is especially designed for small 2 - 3 storey buildings. The new design allows the ability to reduce the cylinder diameter, so that you can use a lower quantity of oil and reduce the lift elasticity. A ...

See the other products
GMV
DC electric torque motor / synchronous / liquid-cooled / permanent magnet
DC electric torque motor
LTS Sincrovert®

Power: 2.5 kW - 496 kW

The permanent magnets synchronous motors of the LTS series have been developed and made to specifically meet the requirements of modern motorization where the “load” is driven directly by the motor without any additional mechanical equipment ...

See the other products
OEMER
DC electric torque motor / synchronous / permanent magnet
DC electric torque motor
66 - 7 590 Nm | RM-36 series

Torque motors are designed as direct drives. Torque motors are frameless equipment motors. Thith motors consist of permanent-magnet rotor and laminated stator. Ruchservomotor JV designed and produced three series of torque motors: torque ...

See the other products
Ruchservomotor JV
pneumatic ejector / compact
pneumatic ejector
Innocheck MPU

Good to know If it fails to pass quality control, there is no place for it on the production line. Our Innocheck MPU makes sure of that. When you use this attractively-priced rejection system, you can be sure that defective PET bottles ...

AC torque motor / 380 V / 480 V / direct-drive
AC torque motor

Torque: 20 Nm - 105 Nm
Rotational speed: 1,500 rpm

Leroy-Somer’s frameless torque motors consist of a separate rotor and stator which are assembled directly inside the machine. The result is a compact, fully-integrated motor with improved dynamic performance. The rotor and stator can ...

AC torque motor / 380 V / 480 V / direct-drive
AC torque motor

Torque: 20 Nm - 105 Nm
Rotational speed: 1,500 rpm

Our housed torque motors provide high torque density at low speed in a traditional motor frame. Available with the full standard range of Unimotor hd servo encoders, the motors can be configured to your specific requirements.​ Advantages ​Direct ...

AC torque motor / asynchronous / 50 V / 115V
AC torque motor
TK series

Power: 6, 8, 3, 10, 20 W
Diameter: 90, 70, 80, 60 mm

Torque Motors (World K) World K Series torque motors Features Winding application High starting torque

AC torque motor / asynchronous / 220 V / 230 V
AC torque motor
TM series

Torque: 0.044 Nm - 10 Nm
Power: 3 W - 20 W

With Gearheads (TM) TM Series Torque motor with power controller unit Features Winding application Torque regulation High starting torque

AC torque motor / synchronous / IP54 / compact
AC torque motor
ERS

Power: 0 W

Description Electrical rotary unit with torque motor and angle of rotation > 360° as well as the pneumatic holding brake and rotary feed-through options, and if desired increased protection class (IP54). Field of application All-purpose, ...

pneumatic ejector
pneumatic ejector

The unit effectively adds value to your production line by identifying faulty boxes after being processed through the bundle strapper. When a defective box is discovered, the unit activates a pneumatic pusher that removes the box completely ...

AC torque motor / synchronous / 400 V / IP54
AC torque motor
ST22 FLUID 13

Torque: 292 Nm - 730 Nm
Power: 6.1 kW - 30 kW
Rotational speed: 200 rpm - 400 rpm

Synchronous permanent magnet torque motors IP54 IC9w7

See the other products
COMER S.r.l.
AC torque motor / synchronous / 400 V / IP54
AC torque motor
ST22 FLUID 16

Torque: 595 Nm - 1,530 Nm
Power: 13.1 kW - 62.2 kW
Rotational speed: 200 rpm - 400 rpm

Synchronous permanent magnet torque motors IP54 IC9w7

See the other products
COMER S.r.l.
AC torque motor / synchronous / 400 V / IP54
AC torque motor
ST30 FLUID 20

Torque: 1,200 Nm - 3,100 Nm
Power: 13 kW - 94 kW
Rotational speed: 100 rpm - 300 rpm

Synchronous permanent magnet torque motors IP54 IC9w7

See the other products
COMER S.r.l.
direct-drive torque motor / AC / synchronous / 400 V
direct-drive torque motor
TK series

Torque: 90 Nm - 21,700 Nm
Power: 6.9 W - 207 W
Rotational speed: 0 rpm - 2,500 rpm

TK-series frameless direct-drive torque motor kits offer high torques at low speed and come as a separate rotor and stator, permitting direct system integration. With 400VAC windings, torques up to 21700Nm, power ratings to 207kW and ...

DC torque motor / brushed / direct-drive / permanent magnet
DC torque motor

Torque: 0.0071 Nm - 0.1412 Nm
Rotational speed: 7,500 rpm

Our family of miniature permanent magnet cube torque brush DC motors contains motors available in .75 and 1 inch frame sizes. These motors are designed to accommodate a wide range of applications including direct drive servo systems, ...

piston
piston

Novatech® pistons combine a proprietary high temperature polyurethane engineered to withstand temperatures up 149°C (300°F) with a flexible lip. These pistons accommodate liner sizes of 4.5-inches, 5-inches, 5.5-inches, 6-inches and 6.5-inches. Manufactured ...

Venetian blind electric torque motor
Venetian blind electric torque motor
UP 520/..3

Electrically interlocked relays (drive protection) End position detection Screwless terminals for connection and through-wiring of untreated single-core, stranded or multi-core conductors, 0.5...2.5mm² Bus-powered electronics Integrated ...

single-phase torque motor / agricultural / for automotive applications / compact
single-phase torque motor

The Torque Motor is a rotary 1 phase brushless actuator with a non-contact position sensor and no gears. A return-to-zero spring can be integrated into a very compact footprint. Torque Motors overview - Travel angle: up to 75 ° - ...

AC torque motor / direct-drive / custom / high-speed
AC torque motor
HTM, STM

Diameter: 230 mm - 710 mm

KESSLER torque motors - High torque motor HTMx: Optimized torque - Speed torque motor STMx: High speed - High torque motor HTM: Installation compatibility

injection piston
injection piston

  This model polyethylene piston ensures constant dispensing force, prevent drip or ooze, contain hazardous fumes and empty all fluid from barrel. White PE double-wiper piston is for most thin to thick fluids.

AC torque motor / synchronous / 100 V / 115V
AC torque motor

Torque: 0.041, 0.016, 0.037, 0.011, 0.042 Nm
Power: 3 W
Rotational speed: 750, 900 rpm

See the other products
DAEHWA E/M CO.,LTD