|
|
Hydraulic hoses and accessories
ERIKS offers a complete ranges of hydraulic hoses, piping, couplings and accessories, used to build reliable and leak-free systems. The high level of knowledge that is converted into actual added value combined with a wide spectrum of suppliers makes ERIKS an ideal partner for both MRO and OEM customers.
|
|
MIL-DTL-13444H Type I | Hydraulic Hose
Meets or exceeds the performance requirements of: MIL-DTL-13444H Type I
Application: Fuel and oil lines in military vehicles and other military applications.
Inner Tube: Synthetic rubber
Reinforcement: Single fabric braid
Cover Compound: Synthetic rubber
Temperature Range: -65°F to 250°F (-53.89°C to 121.1°C)
Qualification: QPL - 13444 Type I approved for bulk hose (3/16 - 3/8")
|
|
|
Designers and engineers are discovering new applications for hydraulic power. Whether the application is construction, mining, agriculture, manufacturing or transportation, Goodyear has a hose to meet the diverse needs of our customers, because Goodyear provides hose products that meet all major global hose standards. Produced to ISO 9001 certification, Goodyear's hydraulic hoses undergo state-of-the-art manufacturing processes and meet the applied international standards of SAE J517, EN 853, EN 854, EN 855, EN 857, and DIN 20023.
|
|
Hydraulic control line
DIN 1TE
Textile reinforced rubber hose for hydraulic control lines.
Discharge under pressure of hydraulic fluids, fuel, grease, air and water.
From 4.8 to 25.4 mm.
|
|
Oil and Hydraulic Systems
Oil Cooling for Engines and Transmission Systems
High temperature resistance and flexibility. Easy installation thanks to innovative connection systems.
Turbocharger Lubrication and Cooling
Hose line systems for hot air and oil mixtures in the turbocharger circuit as well as for the cooling of the turbocharger by water circulation.
Hydraulic Chassis Stabilization
Hose and pipelines for hydraulic force transmission in systems as a means of stabilizing vehicles by providing for enhanced safety and comfort.
Clutch Lines
Hose line systems for DOT4 or Pentosin in the clutch circuit.
|
|
Recommended for:
Pressurised hot oil return lines and air compressor lines, power steering, tilt cab cylinders,
engine and transmission coolant and filtration lines.
Couplings: MegaCrimp®.
Characteristics/benefits: Very good resistance to weathering and ozone.
Compatible with a variety of fluids such as hydraulic oil, phospate esters, diesters, diesel fuel.
|
|
Recommended for: Use on hot and cold water high-pressure cleaning equipment where heavy-duty service is required. Suited for agricultural, sports, valet and maintenance service applications. Grey and blue PowerWash are suitable for use in hospitals, swimming pools and other applications where hygiene is of the utmost importance. Not recommended for steam service.
Couplings: MegaCrimp®.
|
|
Universal tapered nipples
to DIN 20078 for fittings with a
24° and 60° flare and for solderless couplings DIN
2353 / EN ISO 8434-1
45° Elbow
|
|
|
Hoses, hydraulic fittings and quick-release couplings for the die-lifter hydraulic network. Pressure intensifier and pump for generating pressure for manual operation
|
|
ONE SOURCE MANY SELECTIONS
Goodyear is your one source for a wide selection of high-performance hydraulic hose fittings, covering a wide range of designs, shapes, sizes and pressure ratings. With low, medium and high-pressure fittings available for braided, spiral and thermoplastic hose. Fittings include Ultra-Crimp™ (1-piece), Uni-Crimp™ (2-piece), Dual-Grip™ (2-piece) and Field-Grip™ (reattachable). Our line of 21 thread ends include SAE, NPTF, JIC, British Standard, DIN and JIS. End styles include straights, swivels, elbows and flanges. Find the fittings and threads you need, from one source. From Goodyear.
|
|
|
Set in action with motivatings force to spiral of Archimedes, performances differentiated, constitute an effective solution and economic for the transmission of electric power to users you furnish.
|
|
|
Hannay Reels provides manual, spring and power rewind cable reels for a variety of industrial applications, including rescue and haz-mat operations, grounds maintenance and repair, video inspection, portable lighting, and broadcast and entertainment industry applications. Hannay also manufactures reels to handle arc welding cable, static grounding cable and electrical cable for power tools, lights, machinery and generators. All Hannay reels can be mounted on walls, ceilings and worktables.
|
|
Reel with automatic recall by spring. Seal turning double high quality, guaranteed constant passage.
Structure epoxy covered steel. Hydraulic pipe special reel.
|
|
Medium pressure for operating hydraulic cylinders, motors or tools. Pressures up to 3000psi
Hose id (diameter): 6mm,10mm, 12mm
Hose length: 9m,15m
Rewind Method: Spring driven
|
|
Recommended for: General industrial applications such as oil, alcohols, aqueous solutions, hydraulic fluids, acids, detergents and chemicals. Static conductive for more security.
Couplings: MegaCrimp®.
|
|
Without doubt, hydraulic solutions can be said to operate with immense forces. Whoever occasionally needs even more force and therefore doesn't want to reconfigure the complete hydraulic system accordingly can now save themselves the bother by opting to install a hydraulic pressure intensifier.
A hydraulic pressure intensifier lends itself to an entire range of application options, e.g. for rupture tests on hoses up to 5,000 bar, pipes and containers, for high-pressure metal forming (IHU/AHU), for closing and tensioning of moulds and tools, for presses, for proportioning precisely defined volumes and much more.
|
|
|
|
|
|
Flo-Check USB represents the next generation of hydraulic test equipment. This technologically advanced device simultaneously measures flow, pressure, temperature and power within a hydraulic system. Data is displayed and logged through a custom Windows®-based software application; data is received from the Analyzer through a standard USB cable (both software and cable are included with the unit). The unit is bi-directional, provides an accuracy of ±1% of full scale, and includes a low-resistance load valve and internal pressure relief discs.
The Flo-Check USB Hydraulic System Analyzer can be used as a stationary or portable tester for both industrial and mobile hydraulic system diagnostics, and analysis of the prognostic health of a hydraulic system. It features flow, pressure, and temperature sensors that are monitored by a data acquisition module. This module records the operating parameters of the system and transfers them to the user’s laptop via the USB port. It can log up to 12 hours with option to capture data manually or continuous monitoring. Data can be exported to Microsoft Excel® and other spreadsheet programs.
Flo-Check is powered through the USB port of a PC, making it easy to setup and ideal for portable applications. Interfaced to the PC application, the device offers a straightforward method of monitoring system parameters complete with data acquisition.
|
|
|
|
|
|
Beat the heat and the cold
Gates' special high/low temperature hoses recommended for high-pressure hydraulic lines and developed for use on many types of machinery and other applications where heat or cold threatens your hose's life.
Key benefits:
- Easy to route and to install in tight areas
- Lightweight
- Alternative to spiral hoses in high pressure lines where flexibility is required
- Superior impulse performance: tested up to 600,000 impulse cycles
- Compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids
Our ranges:
- G2H: a range of two wire braid hoses for oil temperatures up to 135°C
- G2XH: a range of two wire braid hoses for oil temperatures up to 150°C
- M3KH: the constant pressure hose range for applications up to 21.0 MPa (3,000 psi) and oil temperatures up to 121°C
- M4KH: the constant pressure hose range for applications up to 28.0 MPa (4,000 psi) and oil temperatures up to 121°C
- G2L: a range of two wire braid hoses for oil temperatures from -57°C up to 100°C
- C1TH: a range of one wire braid hoses for oil temperatures up to 135°C
- G1H: a range of one wire braid hoses for oil temperatures up to 135°C
- ACR: a range of one wire braid hoses for oil temperatures up to 150°C
|
|
|
|
|
|
Pipes No-Skive, Elite and Classic.
New flexible devices which facilitate the life of their users...
The pipes Compact Elite No-Skive and Classic No-Skive constitute an average range of pipes pressure adapted to the needs for the current hydraulic market.
Description:
* Tube nitrile intern for the basic pipes.
* Chemical compatibility with oils, water, thephosphatic ones.
* Construction 1 or 2 braids steel.
* Beach of temperature of wide use of - 50 °C with +150 °C.
* Composed elastomers of high quality.
* Pipes with thin external dress.
* The pipes Compact Elite No-Skive are higher than the specifications of the EN standards.
* The pipes Classic No-Skive are in conformity with standards SAE and IN.
Advantages:
* Better chemical compatibility including with biodegradable oils.
* The abrasive resistant is higher than the specifications of the standard ISO 6945.
* Resistor with ozone improved.
* High flexibility which facilitates the installation and improves the resistor with the impulses.
* Weak radius of curvature and reduced weight.
* Can be assembled with the machines Parkrimp portables or of workbench. Flexible pipings thus carried out answer directives EC.
Applications:
* Mobile hydraulics:
Public works, transport, agriculture, forest material, lifting gear and handling, cleaning with water under pressure.
* Industrial hydraulics:
Car industry, machine tool, aeronautics, injection molding, industry of paper, industry of chemistry.
|
|
- Recommended For: Medium pressure hydraulic oil lines
- Tube: Black, oil resistant, Nitrile (BTR)
- Reinforcement: One braids of higher tensile steel wire.
- Cover: Black, oil and abrasion resistant Neoprene (CR)
- Temperature Range: -40 F to +212 F
|
|
|
Designers and engineers are discovering new applications for hydraulic power. Whether the application is construction, mining, agriculture, manufacturing or transportation, Goodyear has a hose to meet the diverse needs of our customers, because Goodyear provides hose products that meet all major global hose standards. Produced to ISO 9001 certification, Goodyear's hydraulic hoses undergo state-of-the-art manufacturing processes and meet the applied international standards of SAE J517, EN 853, EN 854, EN 855, EN 857, and DIN 20023.
|
|
Application
For continuous level measurement in tanks containing fuel oil EL, L or diesel. Specially suitable for underground tanks and basement tanks. For liquid levels from 900 to 3,000 mm..
Description
The hydrostatic level measurement instrument consists of an evaluation unit with digital display (display unit) and a submersible probe with integrated pressure measuring cell.
DIT 01 features the following:
• Universal application in tanks with up to 3 m in height or diameter.
• No dip charts required since all standard tank shapes are stored.
• Fast and safe mounting with complete installation accessories.
• No external supply voltage required.
• Push-to-read function for extremely long battery service life.
• High accuracy of measurement due to electronic sensor (pressure measuring cell).
• Display unit with easy-to-read display.
• Simple operation via menuguided set-up procedure.
• Connection cable of the display unit can be extended by up to 10 m.
|
|
|
Systems of assembly for tubes EMILE MAURIN the systems of assembly are elements of tightening which make it possible to build gauges, installations and operating systems at the same time easily and quickly by using sections of standard tubes, round or square. The very broad nut range of tightening cast solid or made up of several elements offers almost unlimited possibilities. The nuts of cast solid tightening allow very robust tubular constructions. In this case, one will use tubes of precision with an external diameter which remains in tight tolerances. The nuts of tightening made up of several elements are not indicated for tight tolerances because they can also be used with tubes of square section, which allows integration already existing systems.
|
|
Ganter has for many years been a well-known supplier of oil sight glasses made of plastic and aluminium. The range of products has now been enlarged to include oil sight glasses made of stainless steel and brass. In addition, an “ATEX” sight glass made of aluminium has been developed
for use in explosion hazard atmospheres which is available in three sizes with different threads, complying with the directives of the European Union for explosion protection.
|
|
The Liquid Level Gauge has been introduced to complement our range of liquid level sensors. The gauge is available for most liquid types (fuel, oil, water...) and can be etched with other data labels if necessary. The gauge has been designed with special features including fully configurable scaling, adjustable electronic damping and a fully adjustable low level warning indicator. Additional features include auto-dimming control and multi-coloured LEDs ensuring this device can be seen in all lighting conditions.
- Fully Configurable
- High Accuracy
- Low Level Warning
- Low Height and Recess Profile
-Simple Installation
- Lightweight
- Light Sensitive Auto-Dimming
- Available in Fuel, Oil, Water variants (plus others)
|
|
|
The Flo-Check USB represents the next generation of hydraulic test equipment. The device simultaneously measures flow, pressure, temperature and power within a hydraulic system. This data is displayed and logged through a custom Windows®-based software application; data is received from the Analyzer through a standard USB cable (both software and cable are included with the unit). The Flo-Check USB is ideal for testing, troubleshooting and diagnosis in mobile and industrial hydraulic applications, and for setting hydraulic components such as pumps, valves and motors. The unit is bi-directional and includes a low-resistance load valve and internal pressure relief discs.
|
|
|
Flo-tech portable testers are the leaders in state-of the-art hydraulic testing equipment. Offered in three models in a variety of sizes, the compact testers are designed for fast, diagnostic troubleshooting of both mobile and stationary hydraulic systems and components. The PFM6 measures flow, pressure, and temperature simultaneously from one point, while the PFM8 series provides an additional dynamometer for power calculation (HP and kW). In addition to portable testers, Flo-tech manufactures a wide variety of in-line turbine flow meters for hydraulic fluids.
|
|
We Manufacture intensifiers as individual components or as an integral element of a complete systems.
Oilgear is a single source domestic supplier of Engineered Fluid Power and Power Transmission Solutions- since 1921.
We have in-depth experience in custom built hydraulic systems and would like to be your source for intensifiers.
We offer:
- Pressures to 60,000 psi
- Complete HPU packages
- Fast and very accurate controls
- Systems Upgrades
- Quality Field Support Services
- ISO-9001 Certification
|
|
The Stratoflex Products Division designs and manufactures PTFE hose assemblies for aerospace and derivative markets. Our PTFE hose products are available for low-, medium-, and high-pressure applications.
Hose assemblies are custom made for each application according to size, pressure rating, temperature, configuration, and length. Hose fittings are available in stainless steel, aluminum, titanium, and nickel-based alloy materials.
|
|
|
|
Hydraulic hoses, Accessories
