|
|
MegaTuff® stands up to severe abrasion conditions• Remains unharmed when in contact with sharp edges, debris or extraneous objects
• Ideal for bundled hose applications
• Resists wear when dragged along metal or rough surfaces
• Eliminates need for spring guards or other hose protection
• Resists cracking from UV rays
MegaTuff® stands for superior resistance to:• Abrasion (300x of standard hose)
• Ozone
• Weather and UV
• In-oil application
|
|
MegaTuff™ and XtraTuff™ hoses with highly abrasive resistant covers
Surviving the harshest applications
Gates' cost-effective and long-lasting solution to the problem of abrasion.
Key benefits MegaTuff™:
- Cover made of a special hybrid compound offering an exceptional resistance to abrasion, oil, ozone, chemicals and weathering
- Up to 300 times better abrasion resistance than standard rubber-covered hose
- Superior adhesion of the cover to the hose
- Flexible
- Meets or exceeds minimum bend radius requirements of major international standards
Key benefits XtraTuff™:
- Up to 25 times better abrasion resistance than standard rubber-covered hose
- Lightweight, flexible and easy to install in tight areas
- Excellent in hose-to-hose and hose-to-metal applications
|
|
You will be able to reduce your current suppliers
Saving money You will spend less time when you are fitting your equipement
just ask for for covering your necessities, you will avoid old items in your stock
|
|
High quality and competitive price!
The aluminium pipe assemly shown in the picture is for water cooling system of wind power generator of company GE. The wall thickness of the pipe is very thin so that the technical requirement for the welding is high. We have rich experience and well trained technicians & workers for the welding to achieve high quality.
|
|
|
|
|
|
With the STC EZ-Torque, Eaton Aeroquip is launching to the market a very promising innovation in the field of hydraulic hose connection technology and is exhibiting this at "Fluidtrans" in Milan: the adapter-free plug-in connection is easy to install and can be mounted within seconds on all standard thread ports. This connection system, which is available as a mass production item as of the middle of 2008, opens up a completely new range of operational possibilities.
STC EZ-Torque helps you eliminate your port adapters without sacrificing performance. The EZ-Torque connector is your solution to simplifying your hydraulic design and assembly. EZ-Torque combines the advantages of both threaded and threadless connectors - providing efficient assembly, while maintaining the ability to orient phase angles and handle vibration.
Features and Benefits
- Easy to incorporate, no custom ports required
- Allows for quick and easy install
- Reduced Hose fitting installation time
- No Adapter installation time
- Fewer operator-dependent leak paths
- Ergonomically friendly
- Handles vibration and side load
- Lock down / Anti-Rotation
|
|
clamp to standards
For applications, numerous standardized clamping elements are available
* Clamps according DIN 3015 part 1-3
* Flat steel bolt clamp according DIN 3567
* U-bolt clamps similar to DIN 3570
Series strips
Series strips for groups of pipes and dynamically loads of pipe groups
* 3 sizes
* diameter light range from 6 - 25 mm
* diameter heavy range from 6 - 56,4 mm
|
|
|
|
|
|
Ultra-high-pressure hydraulic hose assemblies with crimped on fittings and couplings/nipples and operating pressures starting at 10,150 PSI (700 bar).
CEJN ultra-high-pressure hose assemblies feature high-pressure, spiral-reinforced polymer hose styles, constructed of multiple layers of spiral steel reinforcement with thermoplastic covers and tubes. Hose can be cut to any length and combined with multiple end connection possibilities.
One hundred percent of all hose assemblies are individually proof tested to 1.5 times their rated maximum operating pressure.
CEJN hose assembly capabilities, available throughput the world, enable customers to:
· Receive quick turnaround and nearby after-sales support
· Save production time and money, since assemblies are ready for immediate use without further assembly or testing and are more economical then buying individual components
· Purchase both hose and couplings from the same supplier, ensuring compatible components that are safety and performance tested
With CEJN’s extensive inventory of bulk hose and end connections, many hose assembly styles can be made and shipped the same day orders are received.
|
|
Parker presents a hydraulic flexible device to you ultra high pressure, allowing cutting the water jet.
This flexible device is usable for many applications. There is abrasion resistant, the internal tube remains clean, big lengths of tubes are available. Moreover, the external diameter is smallest.
This flexible device resists UV and has one long life of conservation. Moreover, it is possible to constitute beams of pipes. The line of marking is personnalisable.
|
|
- Recommended For: High Pressure hydraulic lines
- Tube: Black, oil resistant synthetic rubber
- Reinforcement: Four spiraled layers of higher tensile steel wire
- Cover: Black, oil and abrasion resistant Synthetic rubber
- Temperature Range: -40 F to +250 F
|
|
|
Designers and engineers are discovering new applications for hydraulic power. Whether the application is construction, mining, agriculture, manufacturing or transportation, Goodyear has a hose to meet the diverse needs of our customers, because Goodyear provides hose products that meet all major global hose standards. Produced to ISO 9001 certification, Goodyear's hydraulic hoses undergo state-of-the-art manufacturing processes and meet the applied international standards of SAE J517, EN 853, EN 854, EN 855, EN 857, and DIN 20023.
|
|
UNIVERSAL HOSE RANGE: The Universal Hose Range meets and exceeds all the international specifications (SAE, DIN, EN, ISO) for wire spiralled, wire and textile braided reinforced hoses.
EXTREME HOSE RANGE: The Extreme Hose Range offers products designed to achieve very high performance such as: wide temperature range, high abrasion resistance, flame propagation resistance, very high pressure resistance, superior ozone and weather resistance, extreme flexibility, compactness and lightness.
|
|
8M5K hoses
A unique combination of high working pressure and tight bend radius
Gates' wire-braid hydraulic hoses allowing up to 35.0 MPa working pressure at 90 mm bend radius.
Key benefits:
- Unprecedented combination of high working pressure ratings (35.0 MPa) and compactness (90 mm bend radius) in a wire-braid construction
- Significantly lighter and cheaper than any equivalent spiral hose
- Allows compact assemblies thanks to its small bend radius
- Easy to manipulate and route thanks to its superior flexibility
- A member of the Gates Global hose family, which means it also offers outstanding resistance to biodegradable oils and leak-free performance above and beyond any international standard
- Superior impulse performance: validated with Gates MegaCrimp® couplings up to 600,000 impulse cycles
|
|
The best 2SC solution in the market
Gates' CM2T Megaflex® hoses flex to fit the tightest routings.
Key benefits:
- Meets pressure and bend radii requirements of EN 857 2SC, ISO 11237 2SC R16 and SAE 100 R16
- The complete range is also available with special MegaTuff™ cover
- Handles temperatures from -40°C to +100°C constant, 121°C intermittent
- Easy to route and to install in tight areas
- Lightweight
- Superior impulse performance: validated with Gates MegaCrimp® couplings up to 600,000 impulse cycles
- Compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids
|
|
DIMENSIONS 1280x918x2020 mm
WEIGHT 250 Kg
|
|
DESCRIPTION
OLAER has developed a complete range of decompressing and isolating blocks (sizes 10 to 32) to answer all standard and special applications.
These blocks are in conformity with the European Directive on the equipment under pressure (97/23), these appliances have been designed to group together in a single compact unit all the components necessary for the correct operation of a hydraulic system equipped with hydropneumatic accumulators.
|
|
|
|
|
|
A press to be crimped for 1!!!
Until on June 30th, 2008 *
- Must move you to replace a flexible device?
- Does a breakdown machine because of a flexible device have an impact on your profits?
- Must expect to change a flexible device?
- Must be frequently replaced flexible devices?
- Must change flexible devices the night or the weekend?
_____________________________________________________
If you answer yes only one of these questions, a machine to crimp Parker will save to you money!
_____________________________________________________
Carry out yourself your flexible devices where and when you wish it!
- Easily and quickly: cut the pipe, position the end and the plays of bit in the machine and crimp (not stripping of the pipe, not of adjustment of machine)
- In full safety: the flexible device is guaranteed by Parker (subject to the use of a machine Parker with pipes and ends of Parker origin)
- Without qualified personnel: the operation of the machine is simple and effective
* Offer subjected to conditions - on demand for clicking on "More specifications"
|
|
Filling plugs
Air breathers
Tank connectors for air breathers with spin-on cartridge
Air breathers with spin-on cartridge
Air dryer filter breathers
Visual level indicators
|
|
Hydraulic Components
- Bellhousings acc. to VDMA
- 24 561 Rigid and noise damping versions
- Bellhousing for Gear Pumps
- Damping rings, Damping rods
- Cooler bellhousing, series KPV
- Spidex® CJ- / Dentex®- Couplings
- Al-Reservoirs and Accessories
- Elastic bushings for lids NEW
|
|
Hydraulic components
Bellhousing and Accessories
* made of aluminium, cast iron and polyamide
* bottom flanges
* mounting flanges and sealings
Damping elements
* damping rings
* damping bars
* elastic pipe fairleads
Tanks
* steel and aluminium
* oil sumps
* servicing covers
* accessories
Thermomanagement
* oil/air cooler
* oil/water cooler
* tank heatings
* industrial controller, level and temperature switch
|
|
|
HBM Flow Divider Valve is produced in 6 nominal sizes, provides division of flow from a pump into equal parts, normally used to divide flow one pump to two actuators. The flow range is 3 to 60 lpm, ration division 50/50 and 250 bar maximum pressure.
|
|
|
Pressure compensated, division 50/50 as standard. Both motor and cylinder applications divide or combine flows from two actuators to keep the speeds relatively equal
|
|
Flow Divider MTDA
These flow dividing valves divide a flow in two usually equal parts. When flow passes through a valve in the opposite direction, the two part-flows are combined into one single flow (added).
The dividing and combining functions are largely independent of the pressures of the two divided flows and of the fluid viscosity.
Advantages
* These valves do not require maintenance. This lowers costs and reduces the risk of a system failure.
* Flows can be split or merged with accuracy (divide/combine functions).
* The flow division ratio can be altered to suit customer requirements.
* Options:
- end-of-stroke equalisation
- make-up valves
- check valves
- pressure-relief valves
|
|
The Stratoflex Products Division designs and manufactures Waterman® hydraulic fuses and flow regulators for aerospace and derivative markets.
Hydraulic fuses are “normally open” valves that are designed and constructed to close in the event of certain types of system malfunction. The fuse is intended primarily to protect the system from loss of reservoir fluid in the event of a ruptured tube, hose, or component.
|
|
|
|
|
|
Thanks to more than 25 years of experience in assembling rubber and thermoplastic hoses, OLMARK’s Technical Department has worked on and produced 150.000 assembled flexible hose projects.
Assemblies made with standard or special (based on customer’s drawings) IPY crimped fittings are part of OLMARK’s staff daily working tasks.
Every single hose is memorized by a data processing system which ensures unlimited tracing.
Markhip® hose highlights on its label its distinctive technical features, which guarantee its reliability. When assembled with original OLMARK crimped fittings, Markhip® hose shines with its real performances and its ability to meet clients’ requirements.
The hoses can be supplied complete with optionals that Olmark has tested for its products: Spiretta against abrasion, Spiretta GEL, Guaintex against bursting, colour individuation and so on, and also, in accordance with the customer we can make out certifications of the effected performance tests as pressure cycle and flushing for control and removal of the internal impurity.
|
|
Hydraulic Hose
Paragon Hydraulic Hoses comply with the relevant standards and all their criteria undergo Constant tests. Our modern machineries guarantee a high quality level and a long lìfe customer satisfaction.
|
|
|
|
|
|
High- and ultrahigh pressure hoses and -fittings
Low pressure hoses and -fittings
Accessories
High-performance hose lines
We manufacture ready-to-fit hose lines for pressures for more than 600 bar and for all media, hoses made from rubber, plastics and metal for applications in industry, construction and business.
Pneumatic pipes and air hoses
Our range of plastic pipes with calibrated external diameters for pneumatic applications is supplemented by quick connection systems and functional fittings. We can also supply just the right hoses for ventilation and extraction tasks.
Suction and pressure hoses
We can satisfy an extremely wide range of requirements with a broad selection of suction, pressure, construction, conveyor and water hoses.
Fittings
Press-on fittings and jointing systems are available, as well as ball cocks for all pressure levels, diaphragm valves and non-drip quick connection couplings.
Expansion joints
Expansion joints made from rubber, PTFE, metal and textile materials are used for coping with expansion and vibration and also to provide insulation against solidborne noise in pipelines.
|
|
|
Hiflex Factor 4 hoses are designed for use in more arduous applications where a higher safety factor gives the end user peace of mind. They are tested to 1.5 times working pressure to guarantee secure retention of couplings and are suitable for use with oil and fuel, bulk materials, potable water, chemicals, mud and dock loading hoses.
|
|
Hydraulic hoses and accessories
ERIKS offers a complete ranges of hydraulic hoses, piping, couplings and accessories, used to build reliable and leak-free systems. The high level of knowledge that is converted into actual added value combined with a wide spectrum of suppliers makes ERIKS an ideal partner for both MRO and OEM customers.
|
|
MIL-DTL-13444H Type I | Hydraulic Hose
Meets or exceeds the performance requirements of: MIL-DTL-13444H Type I
Application: Fuel and oil lines in military vehicles and other military applications.
Inner Tube: Synthetic rubber
Reinforcement: Single fabric braid
Cover Compound: Synthetic rubber
Temperature Range: -65°F to 250°F (-53.89°C to 121.1°C)
Qualification: QPL - 13444 Type I approved for bulk hose (3/16 - 3/8")
|
|
|
Designers and engineers are discovering new applications for hydraulic power. Whether the application is construction, mining, agriculture, manufacturing or transportation, Goodyear has a hose to meet the diverse needs of our customers, because Goodyear provides hose products that meet all major global hose standards. Produced to ISO 9001 certification, Goodyear's hydraulic hoses undergo state-of-the-art manufacturing processes and meet the applied international standards of SAE J517, EN 853, EN 854, EN 855, EN 857, and DIN 20023.
|
|
|
|
Hydraulic hoses, Accessories
