|
|
Ideal for lifting forklift trucks to other vehicles
A sturdy, purpose-built hydraulic toe jack. Ideal for maintenance work on forklift trucks.
- 4000kgs capacity
- Heavy long life construction
- Hydraulic lifting pump with overload valve
- Low pick up point from toe
- Compact size, with removable handle
- Supplied with test certificate
- Manufactured to ANSI standards with CE and TÜV approvals |
|
- lifting capacity: 5- 140t
- ca 100 models
- single-acting and double- acting
- Flat cylinders, hollow piston cylinders and telescopic cylinders
|
|
The E3 actuator is specially constructed for mobile insert areas.
This actuator works after the helical gear prinziple and needs, in case of his compact construction, a small place. The Eckart E3 finds in most oft the industry sectors his mission: automative engineering, building- and underground machines, machine tools and so on.
Size: 95 bis 170 [mm]
Max. allowable operating pressure: 210 [bar], higher on request
Torque: till 3.600 [Nm]
Angle of rotation: 180°, 360°, and any intermediate angle, even above 360°
Temperature range: -25°C to 70°C
Options: valves, special on request. |
|
Our latest in our programm.
The application area is specially for low pressure-hydraulic with there typical pressure areas of 40, 60, 80 or 100 bar. The E1 works after the multiple helical gear prinziple and needs, in case of his compact construction, a small place.
Size: 40 bis 125 [mm]
Max. allowable operating pressure: 100 [bar]
Torque: till 2.450 [Nm]
Angle of rotation: 90°, 180°, 270°, 360°, and any intermediate angle, even above 360°
Temperature range: -25°C to 70°C
Options: end cushioning, longe-range adjustable end stop, control switch assembly, locating pin, etc..
Special on request. |
|
according to the multiple helical gear principle
How many times did you already look for an actuator, which should make a
rotating or limited rotation in a small installation space? Many times?
Then can Eckart offer you, the current 250 bar actuator, the SM4 with his small, compact design as a ideal solution.
Size: 40 to 300 [mm]
Max. operating pressure: 250 [bar], higher on request
Max. torque: till 85.000 [Nm]
Angle of rotation: 90°, 180°, 270°, 360° and any intermediate angle, even above 360°
Temparatur range: -25°C to 70°C
Options: End cushioning, Longe-range adjustable end stop, Control switch assembly, locating pin, etc..
Special on request. |
|
Fluids :
- Filtered and lubricated air.
- Mineral oil with viscosity between 16 and 160 cSt 40° C 25 µ nominal.
- Water, water solutions or emulsions.
Temperatures :
- 20°C +60°C (140° C HT mod.)
- As a torque generator, rotary actuator can not accept axial and/or radial loads.
- The use of mechanical stroke-end is advisable.
- E' consigliabile l'uso di fine corsa meccanici esterni. |
|
The Lowest Power Lifter!
• Extremely low height for use in confined areas
• Safety lock nut for mechanical load holding
• Single-acting, load return
• Optional special synthetic coating for improved corrosion
resistance and lower friction for smoother operation to
withstand side load forces up to 3% of rated cylinder
capacity without scoring
• Overflow port functions as a stroke limiter
• CR-400 coupler and dust cap included on all models |
|
Low profile CYLINDERS RLS SERIES
• Cylinder body, piston and gland nut “Power Tech” treated for corrosion and abrasion resistance.
• Standard domed piston rod (5-30 ton) or swivel cap (50-150 ton) minimize effects of off-center loading.
• Unique heavy duty spring provides fast piston return.
• A 9796 3/8" NPTF female half coupler is standard with each cylinder (the RLS50 has a 3/8" coupler which is not angled). Oil ports are 3/8" NPTF (except the RLS50).
• Couplers on all cylinders, except RLS50, are angled upward for extra clearance. |
|
... safe, precise, dynamic.
The creativity and many years of experience of our engineers form the basis for innovative products.
HOERBIGER press systems allow you to achieve synchronous positioning accuracies in the µ-range and increased productivity, while guaranteeing the highest demands on operational safety.
Modular systems for most variable requirements:
When exact positioning is required - Systems for CNC-press brakes.
Economical and efficient - Systems for conventional press brakes. |
|
The HTR Series actuator incorporates many hydraulic and mechanical features that make this actuator suitable for high production applications. The Series actuators have been successfully employed in automotive plant production machinery; machine tool equipment; plastics and rubber processing machinery; basic metals production machinery and in material handling machinery.
Features:
Tapered Roller Bearings
Ductile Iron Housing
SAE Side Ports
Wear-Pak® Pistons and Seals
Chrome Alloy Steel Pinion and Rack Gears
Specifications:
Maximum Operating Pressure: 3000 psi(207 Bar) non-shock; except HTR22/45, 2000 psi(138 Bar) non-shock
Standard Rotations: 90°, 180°, 360°
Rotational Tolerance: -0°, +2°
Output Torques: 900 to 600,000 lb-in @ 3000 psi(204 Bar)
Maximum Breakaway Pressure: 70 psig(4.8 Bar)
Mounting Orientation: Unrestricted
Operating Temperature Range: -40 to 180°F(-40 to 82°C) Nitrile Seals; -20 to 250°F(-29 to 121°C) Fluorocarbon Seals
|
|
HTR Hydraulic Rotary Actuators The HTR Series are heavy duty hydraulic rack and pinion rotary actuators suitable for a wide variety of applications, including material handling and valve actuation, in industries as diverse as machine tools, primary metals, mining and oil field equipment.
Standard pressure: up to 210 bar
Standard rotational range of 90º, 180º and 360º
Options include port positions, cushioning, different seal types and mounting styles.
Special designs to customer specification |
|
Principle: rotary actuator after helical gear switch prinziple
combined with a linear cylinder
Size: 40 bis 125 [mm]
Max. allowable operating pressure: 160 [bar], higher on request
Torque: till 2.050 [Nm], higher on request
Angle of rotation: 90°, 180°, 270°, 360°, and any intermediate angle, even above 360°
Stroke: 0 to 1200 [mm], higher on request
Temperature range: -25°C to 70°C
Options: end cushioning, longe-range adjustable end stop, control switch assembly, locating pin, etc..
Special on request. |
|
Moog has comprehensive experience within the range of electrohydraulical drive solutions. We use the application experience of our engineers, in order to develop efficient hardware, the customer requirements regarding achievement, size and technical characteristics fulfilled.
As market leader for servo-hydraulic and servo-electrical products and drive systems for industrial applications Moog supports customers with the analysis of its drive need, in order to come in such a way to the best solution.
Ranges of application
Employment in the plastics industry
Test and applications of simulation
Employment in the deformation technique and within the range presses |
|
CATALOGUE SERVOCYLINDERS KIM [PHOTO]
160 bar ISO 6020/2 DIN 24554
CATALOGUE SERVOCYLINDERS KRM [PHOTO]
250 bar ISO 6020/1
CATALOGUE SERVOCYLINDERS KDM [PHOTO]
250 bar ISO 6022
HIGH-OUTPUT SERVO-CYLINDERS |
|
The Univesal Hydraulic Tool Box
All sets include Enerpac pump, hose, cylinder, gauge and gauge adaptor
Lock-on or threaded connectors
Complete maintenance set for almost every maintenance application
|
|
for heavy loads up to 565 tons!
We are offering high pressure hydraulic tools and equipment like cylinders, pumps, shop equipment, bearing maintenance etc.
On request we will send you the complete catalogue and please do not hesitate to contact us - thanks in advance! |
|
PRONAL has developed a new range of membranes made with reinforced or non-reinforced polyurethane material, designed for low inflation pressure from 0.01 bar. These membranes combine flexibility, elasticity and minimal overall dimensions.
Numerous models in various shapes and dimensions are offered to satisfy many diverse applications. |
|
PRONAL lifting cushions can be used to lift loads of over 70 tonnes and are particularly useful in areas such as civil protection, security and defence.
They are also used in maintenance operations on construction sites and in various industries for moving, blocking and handling operations... Made from elastomer-coated fabrics, the cushions are vacuum vulcanised at a temperature of 140°C, thus ensuring that they are extremely tough.
Advantages :
- easy to install, thin when empty,
- uniform lifting power,
- high degree of control during lifting, progressive lifting process,
- high lifting force.They are also used for maintenance purposes on site and in industries for some operations as moving, stalling, handling...
|
|
The distinguishing feature of Vetter Mini Lifting Bags 8.0 bar/116 psi is the noiseless, jolt-free, and smooth lifting of the heaviest loads. They lift, push, press, prise and split, even on sloping surfaces. The surface profile improves grip on slippery ground such as grass, sand etetc.
They are produced in two versions. Both versions have a multi-layer construction which covers each side of the bag. This is either steelcord or aramide reinforcement. |
|
To be able to achieve a maximum lifting movement with only a minimum insertion space available, lifting bags are the appropriate tools to use. With 12 models, Holmatro has a lifting bag for every job. Thanks to their unique low profile edges the lifting bags can easily be inserted under all circumstances.
The deflated height of our lifting bags is 22 or 25 mm. Using compressed air (maximum 8 bar), the largest model, the HLB 67, reaches a maximum inflation height of 520 mm. Another feature of the lifting bags is their ability to adjust to the lifting surface. The applied pressure is divided over a large surface compared to the use of hydraulic jacks. |
|
|
|
Hydraulic cylinders
