|
|
| Products 91 to 120 of 150 |
To Secure Loads Mechanically!
• Single-acting, load return
• Safety Lock Nut for mechanical load holding
• Special synthetic coating for improved corrosion
resistance and lower friction for smoother operation
• Withstands sideload forces up to 5% of rated cylinder
capacity without scoring
• Overflow port functions as a stroke limiter
• Interchangeable, hardened grooved saddles are standard
• Plunger wiper reduces contamination, extending
cylinder life |
|
for quick application in close space!
- Multi-layer design with Armid material.
- Fill time with 8 bar within seconds.
- Extensive accessories, like suitable case etc. |
|
MRS Cylinders
* The Bimba MRS® Magnetic Reed Switch Air Cylinders are specifically designed to operate Bimba position sensing switches to actuate programmable controllers, relays, solenoids, timers, or any other electrically operated equipment.
* MRS cylinders have an additional groove in the piston to accommodate a magnet. They differ from the Moption because they combine features of the "Z" line with Original Line construction. Type 303 stainless steel rods are standard.
* Options at no additional charge include Magnalube G, no thread, and switch track for standard reed switches.
* Bore sizes available are 9/16", 3/4", 1-1/16", 1-1/4", 1-1/2", 1-3/4", 2", and 2-1/2". |
|
If you need electrical output of piston position, Airpot Corporation
offers an easy-to-install, secure, and reliable solution. Read on...
For customers desiring electrical output of piston position, most Airpel models are offered with an optional switch-activating magnet on the piston, as well as one or more optional aluminum tracks attached to the cylinder. The tracks are specially designed for easy, secure mounting of the Sick, Inc. position sensors which we offer separately. We stock popular models of these extremely reliable GMR sensors along with matching accessory extension cables.
The Airpel incorporates a unique construction to become an instrument-quality air cylinder. It uses a precision fit graphite piston which slides freely – without lubrication – inside a Pyrex® glass cylinder. This makes it ideal for forces from a very few grams to 30 lbs. or more. In fact, Airpel is particularly well-suited to applications requiring smooth motion at ultra-low pressures – and to moving lightweight objects or delicate loads at slow or high speeds. But this air cylinder is no weakling. It can be used to provide brute forces, too – operating under extreme temperatures, at very high speeds and cycle rates, with no degradation in performance. It also runs cleaner than typical air cylinders because it contains no oil. What’s more, it has no rubber or plastic seals to abrade, wear out, or harden with time. And because all exposed surfaces (except pivot model bushings) are stainless steel and nickel, Airpel is extremely clean and corrosion resistant. |
|
High strength alloy steel construction
Plunger blow-out protection to prevent rod over-extension
Hard chrome plated plunger for life
Baked enamel finish for increased corrosion resistance
CR-400 coupler and dust cap included on all models
Plunger wiper reduces contamination, extending cylinder life
Single-acting, return spring |
|
| The LUKAS pulling cylinder HP 30/Z 200 is compact and very light as the cylinder body is made of high-strength light metal alloy and offers a long stroke of 200 mm. For high lateral load tolerance the cylinder is equipped with a wide guiding ring which serves also as a fully loadable stroke limitation. When the pulling job is finished the piston is spring-retracted to its initial (extended) position. |
|
SINGLE ACTING HYDRAULIC CYLINDERS
Capacity 5 Tons to 95 Tons, Stroke 16mm to 260mm, Designed for use in all position, Heavy duty retun springs, Dust particles corrosion resistant painting, Plunger wiper reduces dust particles contamination for extending cylinder life, Collar threads, plunger threads and base mounting holes in many models for the suitability of most applications.
|
|
| The LF... cylinder series is distinguished by flexible design of the differently equipped versions. This means greater flexibility when installing in machines and plants. The cylinders can be supplied without a collar thread, with metric or inch thread dimensions. Further options are fixing bores in the bottom of the cylinder and the piston rod. |
|
Dimensions
SR20 is a double acting cylinder made entirely of stainless steel. Standard cylinder diameter from ø25 mm up to and including ø80 mm.
Enter page Technical drawings for standard cylinders.
Application
Typically used within food industry, fishing industry, environmental technology and wherever the surroundings or the hydraulic fluid condition the use of stainless steel. The cylinder design is simple and robust ensuring long service life in adversely affected environments.
Cylinder Tube
Seamless stainless steel, quality W.St. 1.4301
Honed, Ra max. 0.1 micron.
Internal tolerance H9.
The cylinder tube is also available in acid proof material W.St. 1.4401
Piston Rod
Centerless-polished stainless steel,
quality W.St. 1.4460,
hard chromed min. 20 micron.
Temper, min. 850 HV .
Ra max. 0.3 micron.
External tolerance h9.
Piston Rod Speed:
Max. speed 0.3 m/s.
For higher velocities, use special seals.
Please state when ordering.
Sealings, Piston
Compact packing with nitrile centre ring, polyelastomer shock rings and acetal wear rings.
Piston Rod: Acrylic nitrile rubber seal ring.
Wear Rings: PTFE with bronze.
Scraper: Single lip rubber scraper
Connections
Cylindrical pipe thread BSP
Operation pressure: Max. 200 bar.
Operation temperature:
-20° to +100° C
Pressure medium:
Hydraulic oil on mineral oil basis.
Test pressure: Pressure tested at 250 bar |
|
| The LUKAS telescopic cylinders are made of high-strength light metal alloy and have two resp. three pistons. The single-acting models have piston gravity return, whereas pistons of double-acting models are retracted hydraulically. |
|
- Mounting of head and cap according to the tie rod principle
- Service-friendly modular system
- Small installation dimensions
- Various mounting types
- Interchangeability thanks to standardization
- Industry-specific and project-related cylinders on inquiry |
|
Rated to 2500 psi, 4000 shock pressure. Standard cylinders feature o-ring with polyurethane back-ups on piston and double lipped u-cup on rod. Full threaded rod through 1.25 diameter.
|
|
Hydraulic cylinder (UHD, UHSZ 100/ 160, UHSZ 250)
in accordance with the currently valid ISO and DIN regulations.
In addition, standard cylinders up to 250 bar. In line with customer requirements we also develop special cylinders according to quite individual specifications.
All cylinder versions can be produced as serve cylinders or fitted with an integrated position measuring system. |
|
The Ergoswiss system allows a smooth height or angle adjustment of any worksurface. It is predominately used in office desk's, industrial workbenches and platforms, check-in counters, cashier desk's, hospital and rehabilitation beds and many other applications.
|
|
The Ergoswiss system allows a smooth height or angle adjustment of any worksurface. It is predominately used in office desk's, industrial workbenches and platforms, check-in counters, cashier desk's, hospital and rehabilitation beds and many other applications.
|
|
| ... products without technical information |
| |
|
|
Hydraulic cylinders
