|
|
MegaTuff™ and XtraTuff™ industrial hoses with highly abrasive resistant covers
Surviving the harshest applications
Gates' cost-effective and long-lasting solution to the problem of abrasion.
Key benefits MegaTuff™:
- Cover made of a special hybrid compound offering an exceptional resistance to abrasion, oil, ozone, chemicals and weathering
- Up to 300 times better abrasion resistance than standard rubber-covered hose
- Superior adhesion of the cover to the hose
- Flexible
- Meets or exceeds minimum bend radius requirements of major international standards
Key benefits XtraTuff™:
- Up to 25 times better abrasion resistance than standard rubber-covered hose
- Lightweight, flexible and easy to install in tight areas
- Excellent in hose-to-hose and hose-to-metal applications
|
|
Lake’s Case Industrial drain Professional monitor is an affordable option to using a standard flow meter for case drain applications. It offers a flow measuring accuracy of ±5% of range that can help confirm pumping performance, identify required maintenance and reduce costly MRO down-time associated with unpredictable pump failure.
Designed for convenient vertical, horizontal and inverted installation, the monitor has a sealed window tube that makes it ideal for outdoor/exposed applications and where wash-downs may be required. And Lake backs its Case Drain Monitor with a One-Year Warranty!
|
|
| Aluminium pipe products welded according to customers' design. The title picture shows a pipe product for wind power industrial generator. The aluminium pipes with thin wall-thickness are welded into a complete cooling system. |
|
Ultra-high-pressure hydraulic hose manufacturer assemblies with crimped on professional fittings and couplings/nipples and operating pressures starting at 10,150 PSI (700 bar).
CEJN ultra-high-pressure professional hose assemblies feature high-pressure, spiral-reinforced polymer hose styles, constructed of multiple layers of spiral steel reinforcement with thermoplastic covers and tubes. Hose can be cut to any length and combined with multiple end connection possibilities.
One hundred percent of all hose assemblies are individually proof tested to 1.5 times their rated maximum operating pressure.
CEJN hose assembly capabilities, available throughput the world, enable customers to:
· Receive quick turnaround and nearby after-sales support
· Save production time and money, since assemblies are ready for immediate use without further assembly or testing and are more economical then buying individual components
· Purchase both hose and couplings from the same supplier, ensuring compatible components that are safety and performance tested
With CEJN’s extensive inventory of bulk hose and end connections, many hose assembly styles can be made and shipped the same day orders are received.
|
|
Parker presents a hydraulic flexible device to you ultra high pressure, allowing cutting the water jet.
This flexible device is usable for many applications. There is abrasion resistant, the internal tube remains clean, big lengths of tubes are available. Moreover, the external diameter is smallest.
This flexible device resists UV and has one long life of conservation. Moreover, it is possible to constitute beams of pipes. The line of marking is personnalisable.
|
|
| Designers and engineers are discovering new applications for hydraulic power. Whether the application is construction, mining, agriculture, manufacturing or transportation, Goodyear has a professional hose to meet the diverse needs of our customers, because Goodyear provides hose products that meet all major global hose standards. Produced to ISO 9001 certification, Goodyear's manufacturers of hydraulic hoses undergo state-of-the-art manufacturing processes and meet the applied international standards of SAE J517, EN 853, EN 854, EN 855, EN 857, and DIN 20023. |
|
The best 2SC solution in the market
Gates' CM2T Megaflex® industrial hoses flex to fit the tightest routings.
Key benefits:
- Meets pressure and bend radii requirements of EN 857 2SC, ISO 11237 2SC R16 and SAE 100 R16
- The complete range is also available with special MegaTuff™ cover
- Handles temperatures from -40°C to +100°C constant, 121°C intermittent
- Easy to route and to install in tight areas
- Lightweight
- Superior impulse performance: validated with Gates MegaCrimp® couplings up to 600,000 impulse cycles
- Compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids
|
|
8M5K hoses
A unique combination of high working pressure and tight bend radius
Gates' wire-braid hydraulic pipes allowing up to 35.0 MPa working pressure at 90 mm bend radius.
Key benefits:
- Unprecedented combination of high working pressure ratings (35.0 MPa) and compactness (90 mm bend radius) in a wire-braid construction
- Significantly lighter and cheaper than any equivalent spiral professional hose
- Allows compact assemblies thanks to its small bend radius
- Easy to manipulate and route thanks to its superior flexibility
- A member of the Gates Global hose family, which means it also offers outstanding resistance to biodegradable oils and leak-free performance above and beyond any international standard
- Superior impulse performance: validated with Gates MegaCrimp® couplings up to 600,000 impulse cycles
|
|
DIMENSIONS 1280x918x2020 mm
WEIGHT 250 Kg
|
|
- connection components for cutting ring couplings
- plugs
- lock nuts, reinforcing rings and professional seals
|
|
DESCRIPTION
OLAER has developed a complete range of decompressing and isolating blocks (sizes 10 to 32) to answer all standard and special applications.
These blocks are in conformity with the European Directive on the equipment under pressure (97/23), these appliances have been designed to group together in a single compact unit all the components necessary for the correct operation of a hydraulic system equipped with hydropneumatic accumulators.
|
|
A professional press to be crimped for 1!!!
Until on June 30th, 2008 *
- Must move you to replace a flexible device?
- Does a breakdown machine because of a flexible device have an impact on your profits?
- Must expect to change a flexible device?
- Must be frequently replaced flexible devices?
- Must change flexible devices the night or the weekend?
_____________________________________________________
If you answer yes only one of these questions, a machine to crimp Parker will save to you money!
_____________________________________________________
Carry out yourself your flexible devices where and when you wish it!
- Easily and quickly: cut the pipe, position the end and the plays of bit in the machine and crimp (not stripping of the pipe, not of adjustment of machine)
- In full safety: the flexible device is guaranteed by Parker (subject to the use of a machine Parker with pipes and ends of Parker origin)
- Without qualified personnel: the operation of the machine is simple and effective
* Offer subjected to conditions - on demand for clicking on "More specifications" |
|
Hydraulic components
- Bellhousings acc. to VDMA
- 24 561 Rigid and noise damping versions
- Bellhousing for Industrial gear pumps
- Damping rings, Damping rods
- Cooler bellhousing, series KPV
- Spidex® CJ- / Dentex®- Couplings
- Al-Reservoirs and Accessories
- Elastic bushings for lids NEW |
|
FD - FLOW DIVIDER / 950 Series
White Drive Products flow dividers represent an ingenious use of the patented Roller Stator® gerotor assembly. These highly effective devices use a common housing to supply the input flow to two gerotor assemblies linked by a common drive link. By linking the two gerotor assemblies together, accurate splitting of the flow is assured. These flow dividers use no manufacturer of bearings or rotating professional seals, eliminating the typical failures in other designs. By using the highly efficient Roller Stator® gerotor elements, high efficiencies are maintained, even at low flows. Because White Drive Products flow dividers work at much lower RPMs than most gear dividers, they are noticeably quieter. These flow dividers are an excellent way to synchronize cylinders or motors. Because they tolerate higher output pressure differentials than other designs, they may also be used for pressure intensification by connecting one output to professional tank.
|
|
Thanks to more than 25 years of experience in assembling rubber and thermoplastic industrial hoses, OLMARK’s Technical Department has worked on and produced 150.000 assembled flexible hose projects.
Assemblies made with standard or special (based on customer’s drawings) IPY crimped professional fittings are part of OLMARK’s staff daily working tasks.
Every single hose is memorized by a data processing system which ensures unlimited tracing.
Markhip® hose highlights on its professional label its distinctive technical features, which guarantee its reliability. When assembled with original OLMARK crimped fittings, Markhip® hose shines with its real performances and its ability to meet clients’ requirements.
The hoses can be supplied complete with optionals that Olmark has tested for its products: Spiretta against abrasion, Spiretta GEL, Guaintex against bursting, colour individuation and so on, and also, in accordance with the customer we can make out certifications of the effected performance tests as pressure cycle and flushing for control and removal of the internal impurity.
|
|
| Designers and engineers are discovering new applications for hydraulic power. Whether the application is construction, mining, agriculture, manufacturing or transportation, Goodyear has a professional hose to meet the diverse needs of our customers, because Goodyear provides hose products that meet all major global hose standards. Produced to ISO 9001 certification, Goodyear's hydraulic hoses undergo state-of-the-art manufacturing processes and meet the applied international standards of SAE J517, EN 853, EN 854, EN 855, EN 857, and DIN 20023. |
|
Universal tapered nipples
to DIN 20078 for professional fittings with a
24° and 60° flare and for solderless couplings DIN
2353 / EN ISO 8434-1
45° Elbow |
|
ONE SOURCE MANY SELECTIONS
Goodyear is your one source for a wide selection of high-performance hydraulic tube professional fittings, covering a wide range of designs, shapes, sizes and pressure ratings. With low, medium and high-pressure fittings available for braided, spiral and thermoplastic professional hose. Fittings include Ultra-Crimp™ (1-piece), Uni-Crimp™ (2-piece), Dual-Grip™ (2-piece) and Field-Grip™ (reattachable). Our line of 21 thread ends include SAE, NPTF, JIC, British Standard, DIN and JIS. End styles include straights, swivels, elbows and flanges. Find the fittings and threads you need, from one source. From Goodyear. |
|
The Tecreel range of self-retracting hose reels provides an efficient means of conveying hydraulic power from fixed to moving points on cranes, lorry mounted cranes, manufacturer of forklift trucks and other materials handling equipment. An integral coil spring ensures that the hoses remain constantly under tension
Maximum operating pressure 300 Bar (4350 Ibf/in)
Large ports provide efficient flow characteristics
Siamese 1/4in, 5/16in, 3/8in or 1/2in bore thermoplastic hoses
Cassette loaded coil spring for safety and easy removal
Left or right hand mounted, easily changeable on site
|
|
Professional reel with automatic recall by spring. Professional seal turning double high quality, guaranteed constant passage.
Structure epoxy covered steel. Hydraulic pipe special reel. |
|
|
|
Hydraulic hoses, Accessories
