Loading dock equipment

71 companies | 617 products
Filters
  • What’s new?
    Submit

Dock tables are specifically conceptualized to provide ease and convenience in transferring heavy loads from and into vehicles, irrespective of the availablity of docks. They are more often installed in pits than in docks. They are either outfitted with regular scissor arms or specialized...

{{productDetail[8133]}}

Prefabricated pits built with zinced sheets. They allow for a rapid and exact construction, starting from the front wall only. Easy to assemble in 20 minutes, the prefabricated pit allows to immediately cast the pavement, without subsequent masonry re-makes or perimetrical further...

VEHICLE RESTRAIN SAFETY WEDGE AND TRAFFIC MANAGEMENT

FEATURES
Heavy duty type, with rudder and positioning wheels
Capacity, in compression kg 6.500
Construction heavy duty rigid plastic component sandwich side covered with 8 mm thick zinced steel plates, blocked by passing through ties
5 meters chain for fixing to the...

hydraulic dock leveler - CAMPISACAST

Finished Leveller with pouring containment by perimeter sheets, to be laid into the dock with front wall and slab conform to drawing. To be levelled at final pavement and cast.

The platform is protected from aggressives by a cover that is...

hydraulic dock leveler - CASTLE

CASTLE" dock leveller, pre-mounted on a frame, to be laid on a slab built (as per drawing) on the bottom of the traditional pit. The system is the traditional original one, also if the ACCESSORY and CAMPISA systems represent today about the totality of the installations....

hydraulic dock leveler - SUSPENDED

C" SUSPENDED dock leveller, pre-mounted on a frame leveller to be welded to the rods cast into the cement all around the pit rim. The pit can have the bottom reservation for tail lift, like the shown case (picture A), that requires the heavy reinforcements for sustaining the overhangs.

There is a risk of fractures into the pavement all around the pit, because of the different dilatation...

{{productDetail[28630]}}
dock leveler - 6 t | 6010S Swingdock

The Crawford 6010S Swingdock is the standard solution in general industry applications, due mostly to it's ease of operation. The swing lip of the Crawford 6010S Swingdock safely bridges the gap between building and vehicle bed.

To enable a safe and efficient process...

dock leveler - 6 t | 6010SA Swingdock Autodock

The Crawford 6010SA Swingdock Autodock acts as the base of a complete Crawford Loadhouse, being the loading platform of a complete Loadhouse comprising all relevant components; leveller, shelter and door. With its self supporting frame, it is easy to integrate with any building and is usually positioned outside the building, thereby maximising...

dock leveler - 10 t | 6011S Swingdock

The Crawford 6011S Swingdock is a heavy duty dock leveller with a load capacity of 100 kN.
The swing lip of the Crawford 6011S Swingdock safely bridges the gap between building and vehicle bed.

To enable a safe...

dock leveler - 4 - 6 t | 6010SM Swingdock Minidock

The Crawford 6010SM Minidock is a manually operated dock leveller, specifically developed for operators of fleets of standardised vehicles with the same bed height.

The Crawford 6010SM Minidock was developed to be an easy to operate and economical solution in environments...

telescopic dock leveler - 6 t | 6020T Teledock

The Crawford 6020T Teledock, i.e. the dock leveller with a telescopic lip, is the universal and most flexible docking system. It is suitable for every loading situation - regardless of complexity.

The main advantage compared to other levellers...

{{productDetail[31434]}}
loading dock lift table - 3 000 - 30 000 kg | LBD, LBDD series

The dock lifting platform are designed to offer Dock Lift solutions for fixed installation to meet various requirements. The dock lift (installation height 400 or 650 mm)...

loading dock for aeronautical applications - max. 14 000 kg

An efficient way to load and unload trucks

The Truck Dock facilitates the loading and unloading of air cargo units onto and off trucks.

Equipped...

loading platform mobile - max. 6 800 kg | FlexLoader

A smart combination for air cargo logistics

The FlexLoader merges the functionality of a truck dock...

{{productDetail[19118]}}
loading dock lift table - max. 5 000 kg | TL5000

The TL5000 from I-Lift Equip is a loading table capable of carrying a...

{{productDetail[114879]}}
loading dock lift table - max. 5 000 kg | TL5000

Raised dock shelters
Manufactured in two different versions to limit te thermic exchange between the inside and the outside of the warehouse, the raised dock shelters contribute both to energy conservation and improvement in working...

loading dock lift table - max. 5 000 kg | TL5000

Manufactured in two different versions to limit te thermic exchange between the inside and the outside of the warehouse, the raised dock shelters contribute both to energy conservation and improvement in working conditions, besides not trasmitting...

loading dock lift table - max. 5 000 kg | TL5000

Manufactured in two different versions to limit te thermic exchange between the inside and the outside of the warehouse, the raised dock shelters contribute both to energy conservation and improvement in working conditions, besides...

dock shelter - KD-G

The ground dock shelters KD-G are particularly suitable for sealing loading openings on the floor, equipped or not with a scissors lifting table and characterized by small spaces for manoeuvring....

dock shelter - KD-G

Easy-line

This equipment is fixed to the ground to make the approach of vehicles to the dock easier and more correct, avoiding damages to the loading point itself and making the manoeuvrings of the drivers easier. Thanks...

{{productDetail[22513]}}
loading dock lift table - 1 000 - 3 000 kg, 1 600 - 2 000 mm | 1S series

The 1S series manufactured by Bolzoni, is a loading dock lift table intended for the loading and unloading of vehicles through a pedestrian or fork lift trucks. It is equipped with...

loading dock lift table - 4 000 - 10 000 kg, 1 600 - 2 000 mm | 1T series

The 1T Series that is manufactured by BOLZONI AURAMO is a type of a loading bay lift table. With the use of pedestrian or...

{{productDetail[7077]}}
loading dock lift table - 1 000 - 2 700 kg | AL2/AL1

The AL2/AL1 is a loading dock lift table that is specially constructed for heavy-duty industrial operations. It is equipped...

loading dock lift table - 1 000 - 2 000 kg | DG01/03

The DG01/03 is a loading dock lift table widely utilized for loading goods managing compact things. It is also utilized...

loading dock lift table - 1 000 - 2 000 kg | DG02/04

The DG02 and the DG04 are manufactured by Xilin, and are loading dock lift tables that are suitable for use in heavy industrial...

dock leveler - 6 000 - 8 000 kg | DL

Features:

● Dock leveler's valuable material handling equipment for use as a feeling table on assembly line.
● Structural heavy duty steel construction...

{{productDetail[64400]}}
truck wheel block - SABOT

This shoe will ensure the immobilization of vehicles to allow safe loading...

railcar wheel block - RL - SABOT WAGON

This system is used to...

{{productDetail[7425]}}
railcar wheel block - RL - SABOT WAGON

Use
Galvanized steel frame, composed of U-shaped profiles with highly-flexible flaps, made from 3 mm black plastic with white stripes to guide drivers.

Sides and roof section covered with vinyl fabric,...

railcar wheel block - RL - SABOT WAGON

Use
A bridge between the buildings floor and the truck loading space. Platform with overhanging flap at the front, made from slip-proof material and with a lower section reinforced...

{{productDetail[115225]}}
vehicle restraint system - POWERCHOCK System 5

The Power Chock™ System 5 is the top of the line model of the Power Chock™ family of products. This model includes the restraint mechanism, a complete communication system, control and detection systems that allow full integration with...

vehicle restraint system - POWERCHOCK System 3

The Powerchock™ System 3 provides high performance and outstanding value. This model combines unsurpassed level of safety and an effective communication system with alarm.

The Powerchock™...

vehicle restraint system - POWERCHOCK Système 1

The Power Chock™ System 1 is the basic model of the Power Chock™ family of products and can be installed as an add-on to existing RIG bar restraints. This model offers flexibility to the customer who requires certain docks to accommodate vehicles with damaged or missing RIG bars, or trucks with lift gates.

System components

The Power Chock™ System 1 is composed...

vehicle restraint system - POWERCHOCK Portable 1

Secures 100% of vehicles

Robust, great restraining force

Low initial cost, low maintenance

Effective in winter

The...

vehicle restraint system - POWERCHOCK Portable 3

Secures 100% of vehicles

Robust, great restraining force

Low initial cost, low maintenance

Communiation with alarm

Effective in winter

The POWERCHOCK™ PORTABLE is the...

{{productDetail[121089]}}
{{productDetail[117583]}}
telescopic dock leveler - 6 000 - 10 000 kg | DLHT series

DLHT series electrohydraulic dock leveller with sliding telescopic access ramp are the most effective devices intended for loading equipment access to truck body from the warehouse during loading and unloading. They are used when it is necessary to position the access ramp in the...

electro-hydraulic dock leveler - 6 000 - 10 000 kg | DLHH series

DLHH series electrohydraulic dock leveller with rotary access ramp are optimum devices which make it possible to organize the transshipment site and to provide quick loading and unloading....

mechanical dock leveler - 6 000 kg | MODL series

MODL series mechanical dock leveller does not require power supply and may be used when there is no electricity and it is impossible...

loading dock lift table - 0.15 m/s

Elevating table produced by DoorHan company is a fixed hoisting device intended for vertical movement of objects during the organization of goods traffic between...

{{productDetail[62536]}}
electro-hydraulic loading ramp - PA2P

Electro hydraulic Loading ramp with front lip rotating, particularly suitable for loading-unloading rear of the vehicles in the loading dock.
Designed to level the differences in height...

automatic loading ramp / electro-hydraulic - PUSC

Side loading and back are no longer 'a problem.
Handling...

electro-hydraulic loading ramp - PA2P-AP

The classic platform with rotary lip mod. PA2P comes with pre-assembled electrical and plumbing.
The...

manually-operated loading ramp - PMF

Ramp manually operated, usable in a fixed position.
Flatbed balanced...

{{productDetail[114603]}}
mechanical restraint system / vehicle - STOP TRUCKS®

For increased safety during loading/unloading...

folding loading ramp - max. 400 kg

The demands for reliability and flexibility expected from delivery companies are increasing continuously. Short...

loading rail / aluminum - max. 300 kg

The demands for reliability and flexibility expected from delivery companies are increasing continuously. Short...

loading rail / aluminum - max. 3 000 kg

The demands for reliability and flexibility expected from delivery companies are increasing continuously. Short...

loading rail / aluminum - max. 500 kg

The demands for reliability and flexibility expected from delivery companies are increasing continuously. Short...

{{productDetail[19183]}}
loading dock lift table - max. 2 000 kg, max. 1 400 mm

capacity: 4000 kg
Min. height: 430...

loading dock lift table - max. 2 000 kg, max. 1 600 mm

capacity: 2000 kg
Min. height: 350...

{{productDetail[16040]}}
loading dock lift table - max. 2 000 kg, max. 1 600 mm

Hörmann dock levellers are well-designed solutions for precisely compensating the differences in height between various lorry floors and ramps. Using a dock leveller, the load can be moved in or out of the lorry in a single horizontal movement.

A...

loading dock lift table - max. 2 000 kg, max. 1 600 mm

Loading houses are placed in front of the hall. This means that the entire hall space can be used, right up to the exterior walls. Hörmann loading houses are always a good choice if the...

loading dock lift table - max. 2 000 kg, max. 1 600 mm

Hörmann dock shelters and dock seals protect loaded goods from adverse weather conditions and also save energy costs by minimising heat loss. In addition to this, they prevent draughts that could result in worker...

{{productDetail[5166]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation