|
|
| Products 121 to 150 of 227 |
|
The Set Free FXN is a 3 pipe heat recovery VRF system operating on R410A this allows independent temperature control of up to 32 indoor units with simultaneous heating and cooling from one outdoor unit. Outdoor units range from 14-85 Kw cooling (nominal) and indoor units range from 2.2-14.1Kw cooling (nominal). Available in wall mounted, cassette, ducted, ceiling suspended and floor standing(cased or uncased) this is an extremely versatile range.
|
|
VAV unit
This unit is designed for rooms in which the air conditioning capacity is required to change from time to time, such as meeting rooms and guest rooms. In response to room temperature, the unit controls the volume of air fed from the air-handling unit on a different floor of the building.
|
|
|
Daikin proudly introduces the VRV III series, which is well-suited to large-sized buildings. This air conditioning system provides outdoor units that extend air conditioning capacity up to 54 HP. It also incorporates numerous outstanding features, such as a wide range of outdoor and indoor units, long actual and total piping length, and high external static pressure. The VRV III series provides the power and versatility you need for flexibleVRV III design and easy installation in large-sized buildings. The Heat Recovery Series also enables simultaneous cooling and heating, meeting the various needs for temperature control
|
|
Daikin wall mounted units have a space-saving,
modern profile and have been designed to be
mounted high up on walls. This makes for optimum air
distribution throughout the room and whisper-quiet
operation. The FTXG/CTXG design wall mounted unit
is sleek, compact (only 15 cm deep) and very stylish in
material, shape and colour. The front panel is made
of transparent synthetic material with a matt crystal
white or matt crystal silver surface. It is no accident
that the FTXG/CTXG was awarded the ‘Good Design
Award 2004’, a prestigious distinction in Japan in the
industrial design field.
For more information or other types of air conditioning for your home, please go to the link and you will be connected to the official Daikin site.
|
|
|
This unit's lambada-shaped heat exchanger has a wide suction area which increases the air intake enabling the unit to adjust to the room temperature quickly. The output is a powerful sweeping airflow eliminates that dead zones and improves the cooling and heating effect while the trapezoidal blades cut the air diagonally to minimise air resistance, which reduces noise and improves efficiency. For easy maintenance the unit has a washable carbon and anti-bacteria air purifying filter.
|
|
The COADIS cassette is designed for installation at one end of a ceiling void to heat and cool private and open-plan office spaces. Not only does it combine the economic benefits of installing and operating a central boiler and chiller plant, the COADIS system also allows individual temperature control in all rooms.
Heating capacity: 2 to 13 kW
Cooling capacity: 1 to 5 kW
Available in three sizes and two versions (classic or raised)
Air flow rates: 130 to 800 m³/h
|
|
Frick PowerPac reduces the need for field labor.
Frick compressors, heat exchangers, evaporators and condensers come in a compact package controlled by our Quantum™ LX controls and Frick "turnkey" software.
Advanced heat exchanger technology is put to work to reduce refrigerant usage and create maximum operating efficiency for you.
|
|
|
|
|
|
CWK
Standard equipment:
Water level control
Stainless steel frame
Stainless steel coil evaporator
Chiller IP 54
Operating temp. 37° C max. ambient
High tech scoll compressor / low noise
High efficiency air cooled condensor
Digital thermostat hysteresis +/- 1,0 K
Refrigerant circuit with TÜV approved low and high
pressure switch
By-Pass valve
Draining through water level control
All systems with control transformer. no neutral required
Environment friendly refridgerant R407C
CH-pump with carbide / carbide shaft seal
Panels in RAL colour on request
Options:
DC voltage - control circuit
Drain valve for tank
Water outlet manometer
Water level switch for pump-protection
Winter start up regulation (0-50-100%)
Common alarm (potential free)
Special voltage
Flow switch
Common alarm (potential free)
Water set point +40° C max.
Hand shut off valve between
tank and pump
Wire labelling
Harting connectors / plugs
Refrigerant R 134 A
Non return valve + magnetic valve
Hysteresis +/- 0,3 K
Air filter
Stop process with low/high temperature alarm
CR-pump for pressure above 3 bar with
carbide / carbide shaft seal
Stainless steel piping
Operating temperature > 37° C ambient
|
|
|
|
|
|
General description
Temperature control of coolant is necessary to meet the requirements for the high quality demanded by machine tool operators. Unwanted thermal fluctuations resulting from heating of the coolant must be prevented to minimize scrapped items during manufacturing.
HOFFMANN recirculation chillers maintain and cool the temperature of:
- drilling oils
- hydraulic fluids
- carrier oils
- emulsions
- water
- dielectrics
- and other fluids
Uses:
- Machine tools
- Hydraulic systems
- Tempering and anodizing baths
- Injection molding machines
- Plastics processing machines
- Vacuum systems
- Transformers
- X-ray systems
- Erosion machining systems, etc.
Our state-of-the-art chiller units are all charged with the R 134 a refrigerant that contains no CFCs. Only materials with low reaction levels are used for the components which come into contact with the liquid being cooled. Designs with air-cooled or water-cooled motor-driven compressors can be selected.
The electric control system is located in a fully enclosed, dust-tight IP 54 switchgear cabinet, containing all of the required switching, regulating and monitoring devices, including the adjustable contact thermometer. The entire system is completely wired and ready for connection to a 400 V, 50 Hz, 3 phase or 460 V, 60 Hz, 3 phase, PE (no neutral conductor required) power supply system. The design complies with all applicable regulations and codes for industrial equipment.
|
|
Koolant Koolers Model KV
The KV chiller stands for Kool Value. Available in one to ten tons of cooling capacity, this indoor water chiller is simple to use and maintain. The KV model is kept in stock for immediate delivery.
|
|
Grasso has produced a new generation of liquid chillers to meet user needs particularly in the industrial market.
Over the years, the field of application has also been extended to cover the air conditioning sector.
Features
Highest COP values and low operating costs
No ODP and no GWP
Optimim TEWI value
Proven reliability
Low noise and vibration
Low ammonia content
CE conformity
|
|
Centrifugal liquid chiller (water cooled)
This system uses air as a cooling medium and uses no fluorocarbons that destroy the ozone layer. The installed microcomputer achieves high performance and functions for the air conditioning of ordinary buildings, operating processes in plants, communities, and other applications.
|
|
* Air Cooled Water Chillers
* Air Cooled Water Chillers-Heat Pump type
* Water Cooled Water Chillers
Daikin chilling units employ advanced technology that provides highly accurate temperature control to within 0.5℃. They are widely used in applications ranging from air conditioning to industrial equipment. Recent changes have introduced new models with substantially increased capacities of up to 480 HP and various model series, including advanced inverter type units, year-round cooling type units, and units with brine-resistant specifications. By providing a full lineup of heat source series choices, Daikin offers an even more flexible array of solutions for a wide range of heat source applications.
|
|
APEX high-perfprmance water coolers are freestanding and compact. Thy are designed and installed to control specialist processes ( electro-spindles, linear motors, laser, electron guns, vacuum pumps, etc ).
Special coolers have been developed for coolant fluids (emulsion and cutting oil).
RLB RLBE and RLBH range : 400 - 6000 KW cooling power.
|
|
* Synoptic of operation on LCD screen
-Display of the exit water temperature
-Status of the Chiller : on/off
-Status of the pump : on /off
* Synoptic of alarm on LCD screen
-Therma alarm of the compressor
-Alarm of low water level in the tank
-High and low alarm of the refrigerant pressure
Ø allow to know and repair the breakdown very quickly and thus reduce at the maximum the downtime.
|
|
Chilly: Cooling water - Industrial compact water chiller
Standard equipment
Waterlevel control outside
Stainless steel coil evaporator
High tech. scroll compressor / low noise
High efficiency air cooled condensor
Digital thermostat hysteresis +/- 1,0 K
Refrigerant circuit with TÜV approved high pressure switch
Chiller IP 44
Operating temperature max. 42° C ambient
Plastic water tank
Draining through water level control
Environment friendly refrigerant R 407 c
Internal by-pass for pump protection
Non ferrous water circuit
CE-Standard / ISO 9001 / EN 60204
Grundfos/Speck pumps
Water connection quick cuppling
Options:
Water outlet manometer
Waterlevel switch for pump-protection
Common alarm (potetial free)
2 x water inlet / outlet
Special voltage
Flow switch
Autom. fresh water supply
|
|
|
The gwk compact chiller weco with air or watercooled condensers of up to 250 kW cooling capacity are developed in various technical designs and with more than 20 different performance gradings.
|
|
|
|
|
|
We are glad to inform you that Systema S.p.A. has introduced in its range of products the "RENEWABLE ENERGY PACKAGE".
This complete product is an Absorption refrigerator-thermic System created for the external installation.
Its power supplyies can be:
- gas;
- hot water produced by solar concentrators and collectors;
- fume-steam heat recovery systems;
- fumes and hot water of a cogenerator.
Thanks to a cogenerator, Renewable Energy Package, becomes a CCHP system (combined cooling, heating and power) for the production of hot water, cooling water and electricity.
This preassembled OR ENBLOC package is composed by an Absoprtion Chiller, a cooling tower, a cool and hot water storage, pumps, filters, mixing valves and a control panel for the management of the complete system.
Systema S.p.A. designs, produces and commissions the Renewable Energy Package in its industrial plants.
One of the most important advantages is that our company offers a complete high-tecnology system to be installed outside, according to the particular requirements of the customer.
|
|
The refrigerant circuits feature a mono compressor, bi-compressor, or trio compressor in tandem configuration with welds executed using silver alloy weld material. Refrigerant circuit components:
Expansion capillary tube (001 ÷ 004);
Mechanical or electronic lamination valve (005 ÷ 930);
Shut-off valves (optional);
Filter/filters drier;
Liquid and moisture indicator;
Muffler;
Desuperheaters or recovery condensers to produce hot water (opt.):
Safety pressure switches on high pressure (005÷930) and low pressure sides (022÷930);
Pressure connections for charging and discharging refrigerant fluid;
Clearly visible dual scale pressure gauges (opt);
Condenser coil protective guard;
Electrical panel ventilation (opt.);
Pre-painted condenser coils (opt.);
Built-in free cooling coils (ECF);
Heating pump (ECH);
Check valve (opt.);
Cycle inversion valve (opt.);
Phase advancing condensers (opt.).
|
|
The Water Cooled Cooling Only Chillers RCUE WG2 are available in wide range from 40 to 240 Hp (134 to 696kW) each unit incorporates the latest developments in screw compressor technology. The compressor's continuous capacity control allows for a 15 to 20% energy saving over step control, this along with the unique electronic control system enables the chiller to precisely maintain a constant outlet temperature independent of cooling load. This benefits not only air conditioning but also industrial process use.
- Screw compressor highly reliable with very low noise and vibration
- Continuous capacity control allows for a 15 to 20% energy saving over step control
- Outlet water temperature controlled precisely independent of cooling load
- Plate type heat exchanger, increased efficiency but with less refrigerant
|
|
Global Water Cooled Screw Chiller Range
Features
HFC-134a refrigerant
New Carrier Screw compressor technology (power3)
Dual Compressor/Dual Circuit advantages
Flooded Cooler
Prodialog 4 electronic control
|
|
Water cooled chillers CW Series
With a cooling capacity from 71 to 910 kW, the CA Series water chiller has been designed to operate indoor, with water condensing temperature from +17°C to +40°C and cooling water temperature from +5°C to +20°C.
Advantages:
- Scroll compressors, significantly reducing energy consumption and noise levels
- Stainless steel brazed-plate evaporators for a highly efficient heat exchange
- Internal water circulation pump for optimal flow (optional)
- Internal galvanized and insulated tank for temperature stability and energy saving
- Various safety devices to protect the unit and guarantee optimal functioning
- Reliable and sophisticated microprocessor control; it displays key water temperature visualisation and alarms in a simple format.
- Green refrigerant R407C, in line with Piovan’s respect towards environmental concerns
|
|
APEX high-perfprmance water coolers are freestanding and compact. Thy are designed and installed to control specialist processes ( electro-spindles, linear motors, laser, electron guns, vacuum pumps, etc ).
Special coolers have been developed for coolant fluids (emulsion and cutting oil).
RLA RLE and RLH range : 6-175 KW cooling power.
|
|
|
|
|
|
VWK/1 Cooling-water recooler
Standard equipment
Water level control
Stainless steel frame
Stainless steel coil evaporator
Chiller IP 54
Operating temp. 37° C max. ambient
High tech scoll compressor / low noise
High efficiency air cooled condensor
Digital thermostat hysteresis +/- 1,0 K
Refrigerant circuit with TÜV approved low and high
pressure switch
By-Pass valve
Draining through water level control
All systems with control transformer. no neutral required
Environment friendly refridgerant R407C
CH-pump with carbide / carbide shaft seal
Panels in RAL colour on request
Options
DC voltage - control circuit
Drain valve for tank
Water outlet manometer
Water level switch for pump-protection
Winter start up regulation (0-50-100%)
Common alarm (potential free)
Special voltage
Flow switch
Common alarm (potential free)
Water set point 40° C max.
Hand shut off valve between
tank and pump
Wire labelling
Harting connectors / plugs
Refrigerant R 134 A
Non return valve magnetic valve
Hysteresis /- 0,3 K
Air filter
Stop process with low/high temperature alarm
CR-pump for pressure above 3 bar with
carbide / carbide shaft seal
Stainless steel piping
Operating temperature > 37° C ambient
|
|
A Box Cooler is a cooling system which finds growing application both for inland and sea going ships.
The unique characteristic of box cooling
Cooling water is forced through a U-tube-bundle, which is placed in a sea-chest having inlet- and outlet-grids. The cooling effect is reached by natural circulation of the outboard water in the sea-chest or by a circulation due to the speed of the vessel. The outboard water is heated and rises by its lower density, thus causing a natural upward circulation
|
|
APEX high-perfprmance water coolers are freestanding and compact. Thy are designed and installed to control specialist processes ( electro-spindles, linear motors, laser, electron guns, vacuum pumps, etc ).
Special coolers have been developed for coolant fluids (emulsion and cutting oil).
RLA RLE and RLH range : 6-175 KW cooling power.
|
|
Construction:
- Pump casing with suction and delivery connections with the same diameter and on the same axis(in-line).
- With fittings
Construction Materials:
- Pump body: Cast iron
- Impeller: PES composite
- Shaft: Ceramic
- Bearings: Ceramic
Applications:
- For clean liquids without abrasives which are non-aggressive for the pump materials.
- Civil and industrial heating systems.
- Cooling and air-conditioning systems.
Operating conditions:
- Liquid temperature from 2°C to +110°C
- Ambient temperature up to 40°C
- Max.permissible working pressure: 10bar
Motor:
- 2-pole induction moter, single-phase 230V,50Hz
- Three adjustable speeds
- Insulation class H
- Protection IP44
|
|
| ... products without technical information |
| |
|
|
Air conditioning
