|
|
48 inch
high performance
48" 1/3 HP
high performance One-speed Cools 325 m2
# Heavy duty 1/2 horsepower motor
# Almost maintenance-free operation
# Flexible capabilities for ducting
# Shipped completely assembled and
ready to operate, right out of the box
# Operates for cents a day, a fraction
of air conditioning
# Environmental friendly with efficient /
effective resource use
# Unit & water supply are both portable
# Durable one-piece molded plastic poly-
ethylene housing
# Energy Efficient Motor and pump
# Cooling is accomplished naturally through process of evaporation
|
|
16 inch
heavy duty
16" 1/3 Direct Drive
Heavy Duty Variable Speed Cools 90 m2
# Heavy duty 1/3 horsepower motor
# Almost maintenance-free operation
# Flexible capabilities for ducting
# Shipped completely assembled and
ready to operate, right out of the box
# Operates for cents a day, a fraction
of air conditioning
# Environmental friendly with efficient /
effective resource use
# Unit & water supply are both portable
# Durable one-piece molded plastic poly-
ethylene housing
|
|
24 inch
high performance
24" 1/3 HP
High performance Variable Speed Cools 167 m2
# Heavy duty 1/3 horsepower motor
# Almost maintenance-free operation
# Flexible capabilities for ducting
# Shipped completely assembled and
ready to operate, right out of the box
# Operates for cents a day, a fraction
of air conditioning
# Environmental friendly with efficient /
effective resource use
# Unit & water supply are both portable
# Durable one-piece molded plastic poly-
ethylene housing
|
|
Evaporative cooler "AD" series from 28.000 up to 63.000 m3/h
AD-30 / AD-35 / AD-40 / AD-55 / AD-70
DESCRIPTION:
Coolers conceived to cool and ventilate small and medium-sized premises where it is necessary to have an equipment to cool and humidify premises and other concrete working or machinery areas.
It can also be used for the air-conditioning of farms and greenhouses.
FUEL:
Water
APPLICATIONS:
Ideal equipment to cool and humidify premises that range from 1.125 m3 to 3.150 m3 approximately.
|
|
DESCRIPTION:
Coolers conceived to cool, humidify and ventilate small and medium-sized premises or concrete working or machinery areas.
It can also be used for conditioning farms and greenhouses.
Multiple installation positions in order to make easy to place the equipment.
FUEL:
Water
APPLICATIONS:
Ideal equipment to cool and humidify premises that range from 150 to 900 m3 approximately.
|
|
COMMON FEATURES
They are specifically designed to cool switchgear or analysis
cabinets in Hazardous areas.
All electromechanical components are certified ATEX, Zone II type Eex-d B or C.
The standard housing is made with AISI304 stainless steel, and upon request AISI316.
The components must be wired at customer care to the cabinet.
As option is available an Eex-d commandbox to control the airconditioner. Upon request other power supplies or temperature classes are available.
|
|
Thalassa fan convector are reversible heating and air conditioning.
The offered range includes 4 models and 5 sizes, with powers from 5 kW cold production and 11 kW hot production.
Since there is poor residual pressure with this equipment (20 Pa), they are used preferably for direct blowing either hanging or wall mounted, with or without casing.
Easily integrated in any type of premises due to its discrete presentation and RAL 9010 epoxy painted frame.
Aircalo offers a wide scope of flow control customization.
|
|
|
|
|
|
Major 2
The Major 2 fan coil unit is designed to be mounted vertically on a wall or horizontally below ceilings to heat and cool homes, businesses and industrial and healthcare facilities. Not only does it combine the economic benefits of installing and operating a central boiler and chiller plant, it also allows individual temperature control in all rooms.
Available in six sizes and two models:
- CH: horizontal cased,
- CV: vertical cased.
Heating capacity: 2 to 20 kW
Cooling capacity: 0.6 to 8 kW
Air flow rates: 115 to 1300 m³/h
- Polymer casing with solid RAL 9010 finish,
- Two access doors lead to air bleed valve and control terminal,
- Water coil: two or four tubes or two tubes and electric heater,
- Condensate drain pan,
- Seven-speed motor (three factory-wired speeds) with balanced, double-inlet aluminium blower wheel,
- Mounting bracket frame,
- Regenerative polyester fibre filter. Efficiency class: G3 (EN 779),
- Fully enclosed electrical junction box,
- A wide selection of control options.
|
|
Floor Standing Type
This space-saving design with a slim shape and smart vent line offers the least obstruction to the surrounding area.
* The unit can be easily installed on the floor along the wall or under the window. Maintenance is simple.
* This type can be hung on the wall for easier cleaning.
|
|
|
Offering exceptional performance levels in terms of efficiency, the units in the new series are able to exploit low ambient air temperature conditions whenever available - all year round. The new range, which extends the existing line of air conditioning units, has been specifically engineered to provide the exceptional reliability demanded in industrial application. Although the maximum saving in energy is obtained during continuous operation of the systems for 24 hours/day, chillers equipped with free-cooling allow very substantial power consumption savings even with short periods of operation, while also guaranteeing longer life expectancy and reduced maintenance requirements when compared to conventional chillers. The operating methods utilized guarantee energy savings typically in excess of 40% with respect to conventional units.
|
|
|
Chiller CGD is a economic machine for cooling process waters in the plastics industry, the mechanical and pharmaceutical industries, welding processes, industrial automation, laser technology, EDM, graphics a nd the textile farm ing and food industries.
|
|
|
|
|
|
This is a heat recovery unit, which ensures air exchange in the building, which is essential for healthy breathing. The air is sucked in from outside and heat is added from the exhaust (heated) air without this two being mixed. This saves up to 90% of the heat. Furthermore, the fresh air from outside is filtered and directed through ducting to individual rooms. In the opposite direction, the unit sucks in air from the room, takes off its heat and exhausts to it outside.
The AVENTIS heat recovery unit, with a view to its air volume output, compact dimensions and automatic regulation, is especially intended for the ventilation of smaller shops, cafes, restaurants, administrative areas, sports grounds and others.
SPECIFICATION
- Air output up to 2 400 m3/h
- Recuperation efficiency up to 90%
- Low energy demand thanks to EC motors
- Standard delivery includes sophisticated automatic regulation
- Standard delivery includes multilingual remote control (EN, FR, RU, DE)
- User friendly operation
- Quiet and economical running = safes your money
- Long life span
- Possibility to control extended electric or water heater (PID)
- Unit height 360 mm
|
|
RECUBOX is a cased heat recovery exchanger for use in transferring air and the recovery of heat from the air taken from the interior to the fresh air transferred into the interior without the two being mixed. It is intended for operation in a basic environment for the transfer of air not containing rough dust, grease, chemical vapours and other pollutants. It is an easy and effective solution leading to a higher ventilation efficiency and lower electrical energy consumption on current air conditioning systems. RECUBOX is equipped with a highly efficient plate counterflow heat recovery exchanger made from Al with an efficiency of 92%.
SPECIFICATION
- under the ceiling installation into air-conditioning duct systems
- flow rate range: 300, 500, 700, 1000, 1500 and 2000 m3/h
- effeciency up to 92 %
- pocket filter design (G4) and without filters
- sandwich cover construction casing 32mm
|
|
The ISIS Recover recuperation unit is designed for the exchange of air in households necessary for healthy breathing. It draws outside air through ducts and transfers heat to it from the exhaust air (heated in the indoor environment), without mixing the two types of air. In this way up to 60% of heat is saved. The fresh air is furthermore filtered and transferred through ducts into individual rooms. The unit draws air in the reverse direction from the room, removes heat and blows it into the outside environment.
The ISIS Recover recuperation unit is, thanks to its air output, compact dimensions and comfortable controls designed for ventilating family houses and apartments.
Specification:
air output 300 to 500 m3/h
recuperation efficiency up to 60%
low power consumption = ENERGY SAVINGS
width of unit 600 mm
equipped with an integrated heater
comes with a mechanical by pass as standard
comfortable controls using a remote control
long operational lifetime
|
|
Ventilation unit to extract hot air from open fire place in a one family house and to distribute it in other rooms.
Range Ref. Description Detail Quot.
Groupe Air Chaud Unidébit Extraction of hot air from open fire place
Groupe Air Chaud Filtre Hot air unit with filter and drived by bimetal
|
|
Aqualis 2
Air-source reversible heat pump for heating and cooling of individual homes and small businesses. May be connected to emitters that radiate gentle heat, such as underfloor heating and cooling systems, terminal units (such as fan coil units and water cassettes) or low-temperature radiators. May be installed in new or renovated housing and buildings to replace or be used in conjuction with a gas or oil-fired boiler. Designed as standard for outdoor installation without any special weather protection.
Eight models available
Heating capacity: 6 to 19 kW
Cooling capacity: 5 to 18 kW
- Complete packaged unit housed in a corrosion-resistant recyclable plastic casing,
- Scroll compressor,
- Water-cooled brazed-plate heat exchanger,
- Low-speed propeller fan,
- Hydraulic module with accelerator pump and expansion vessel,
- Microprocessor-based control unit with MICROCONNECT two-wire remote control and self-regulating functions,
- R-410A refrigerant.
|
|
*** Cantek Hermetic Condensing Unit ***
Basic Equipment, low cost solution for small cold rooms and refrigrated cabinets and displays.
- Hermetic Compressor
<< (-5/+5 deg. C) from 0,37kW to 1,48kW
<< (-18/-25 deg. C) from 0,74kW to 2,22kW
|
|
|
|
|
|
Aqualis Caleo
Air-source heat pump for heating of individual homes and small businesses. As it operates in the high temperature ranges (+65°C for an outdoor temperature as low as -12°C), it can be connected to emitters of all types, terminal units (such as fan coil units and water cassettes) or radiators. May be installed in new or renovated housing and buildings to replace or be used in conjunction with a gas or oil-fired boiler. Provides complete autonomy and offers comfort and real energy savings when combined with a domestic hot-water tank and a buffer tank. Designed as standard for outdoor installation without any special weather protection.
Three models available
Heating capacity: 13 to 19 kW
- Complete packaged unit housed in a corrosion-resistant recyclable plastic casing,
- EVI (enhanced vapour injection) scroll compressor,
- Water-cooled brazed-plate heat exchanger,
- Variable-speed propeller fan,
- Inrush current limiter as standard on single-phase model, as required by French standard NF C 15 100,
- Hydraulic module with accelerator pump,
- Microprocessor-based control unit with MICROCONNECT two-wire remote control and self-regulating functions,
- R-407C refrigerant,
- Domestic hot-water tank optional.
|
|
Medium capacity air-to-water heat pump for "high temperature" heating only. Serves as a boiler backup in large homes and multi-residential buildings as well as businesses, hotels and healthcare facilities.
Particularly suited to renovations, the unit is designed to be connected to an optional mixing tank with multiple connections that supplies water to high-temperature radiators.
This packaged unit is designed to be installed outdoors in urban environments. No special precautions are required to protect it from adverse weather other than frost (in areas where frost is a possibility).
Available in four sizes:
TDC 80Z to 150Z: High temperature HEATING only; hydraulic system without buffer tank
Heating capacity: 25 to 48 kW
Outdoor use (-20°C to +45°C)
|
|
|
|
|
|
Innovation, activity, market oriented behaviour, those are the distinctive HITEMA characteristics, Hitema has been able to play a loading role on the international market thanks to her ability to place good technological solution for industrial conditioning, industrial refrigeration and for air compressed treatment and thanks to the preparation of a commercial net that includes professional technicians that besides carefully promote the products, provide a real consulting service to the Customer, this service is an integrant part of Hitema offer.
Water chiller with scroll compressors
ECA basic type 001÷280 kW
ECT silent or supersilent version 005÷280 kW
ECC basic with centrifugal fans 010÷180 kW
ECFS basic with free- cooling, 030÷180 kW
Water chiller with screw compressors
ECS basic R407C 230÷930 kW
ECF basic with free- cooling included, R407C
ERS basic R134a NEW!!! 245÷980 kW
ERF basic with free- cooling,R134a NEW!
Water chiller with screw compress. and very high free cooling performance
ES basic mod.with free cooling, R407C NEW! 080÷800 kW
Water chiller with screw compressors for high ambient temperature
ECSH basic mod.,R134a NEW! 195÷655 kW
Water chiller with remote condenser
ECRS mod.with scroll compressors 022÷280 kW
ECRB mod.with screw compressors 230÷930 kW
Water chiller with water condenser
ECWS mod.with scroll compressors,R407c 001÷280 kW
ECWSH mod.with scroll compressors,R134a
ECWB mod.with screw compressors,R407c 230÷930 kW
ECWBH mod.with screw compressors,R134a
Heating pump
ECH water air reversible 012÷280 kW
ECG geothermic with scroll compressors-R404a 004÷020 kW
|
|
|
|
|
|
New space
Packaged, self-contained rooftop unit intended for air conditioning large surface areas. It is designed for outdoor rooftop installation on the premises requiring air conditioning.
Heating capacity between 20 and 286 kW
Cooling capacity between 19 and 277 kW
Air flow rate of between 4 000 and 46 000 m3/h
Available in 17 models and 2 versions:
- M0: Standard version - All-air return,
- MT: Version with a fixed fresh air inlet for the intake of a minimum amount of clean fresh air which can be manually adjusted using a damper,
- MS: Version with motorised damper at the air return and for the fresh air, thereby providing free-cooling operation when needed,
- ME: Version with motorised fresh air intake damper for the fresh air and at the air return + extraction propeller fan
- MK: Version with motorised fresh air intake damper for the fresh air and at the air return + automatic extraction damper which opens when there is a positive pressure in the room
- MA: Version with motorised intake damper at the air return and for the fresh air for free-cooling operation + an air return propeller fan with adaptable extraction damper depending on the positive pressure in the room,
- MC: Version with motorised intake damper at the air return, for the exhaust air and fresh air for free-cooling operation + an air return centrifugal fan to ensure the flow of exhaust air is equal to the fresh air intake flow.
- RPF: Cold only,
- IPF: Hot or cold reversible
|
|
Supplied with high efficiency and reliable scroll compressors,
optimized heat exchangers and high-performing fans,
the rooftop UAT(Y)P series are designed to ensure a high
energy efficiency and reduced consumption.
The unit’s unique air conditioning ’plug and play’ concept and
single unit configuration allow hassle free installation
without the need for additional piping since both indoor
and outdoor sides are pre-connected.
Factory pre-charged refrigerant ensures clean and efficient operation.
For more information, please go to the link and you will be connected to the official Daikin site or take a look at the catalogue.
|
|
External main units are intended for use on the outside of buildings, e.g. on roofs.
Roof units are equipped with a little roof, air inlets and dischargers. The roof protects against precipitation and its profile prevents water accumulation and leaks. The design of the air inlet and air dischargers fitted with liquid traps and fine mesh preventing precipitation water and mechanical impurities from entering the inside of units. In order to ensure protection against weather conditions, all automatics components and movable elements (e.g. throttles) are located inside units. As an option, roof units are equipped with empty sections designed to accommodate control-pumping units.
A wide performance scope ranging from 1 300 to 125 550 m³/h allows for using the Erato main units in large-volume buildings like:
- industrial halls
- super and hypermarkets
- warehouses
|
|
|
The Tri-Stage Intake Air Filter System comes in 3 sizes with capacities of 6,000 to 40,000 cfm. The hinged louver section allows easy access to change filter elements and is available with a choice of weather louver section or dust louver inertial separator as first stage. Tri-Stage Intake Air Filter Systems are manufactured with 7 gauge plate welded construction and galvanized weather louver and filter holding frames. Draft gage and pressure swith come standard.
|
|
Wide selection with the inverter series
Our wide-ranged lineup meets customer needs when it comes to functions and indoor unit types.
Enhanced comfort with Daikin inverter
Comfortable air conditioning is achieved through variable output control made possible by the inverter, which continually maintains the set temperature while detecting load, which varies with time of day and number of room occupants.
|
|
|
|
|
|
Westerbeke Rotary Aire™ Marine Air Conditioning.....
Quick Cooling in Hot Weather - Warmth in the Cold.
Westerbeke Rotary Aire™ Marine Climate Control puts instant, efficient cooling, warming and air dehumidifying all at your fingertips. Rotary Aire™ marine air conditioning lets you enjoy the luxury of a cool, comfortable boat cabin on the hottest summer day and lets you extend your boating season with toasty-warmth on crisp spring and autumn nights. And because Rotary Aire™ boat air conditioning removes excess humidity, the oppressive stickiness and damp mustiness common on boats that are closed-up for extended periods is eliminated. The Rotary Aire™ base is enclosed to prevent condensation water from spilling and is constructed from ABS plastic to virtually eliminate rust and corrosion. The patented "V-shaped" evaporator assembly and rotary compressor make Rotary Aire™ boat air conditioning super efficient and whisper quiet.
We're more comfortable on the water!
With over 70 years manufacturing world-class marine products, Westerbeke has earned a time-proven reputation for being the choice of seasoned boaters and boat builders. Westerbeke’s Marine Climate Control Systems are a true technical extension of our vast marine knowledge. Available in 10,000 BTU and 17,000 BTU models, these state-of-the-art marine air conditioning systems are designed to provide you with the ultimate in remarkably quiet, efficient, personal comfort. And all with the performance, durability and dependability that Westerbeke is famous for. When it comes to effective air conditioning for your boat, Westerbeke Rotary Aire™ is more comfortable on the water!
|
|
Advanced air handling unit that creates precise micro-climates for sensitive pharmaceutical and medical device applications.
Temperatures from 15°C to 45°C and humidities from 30% to 98% relative humidity can be pre-set on the Micro-Environment Control System to provide consistent temperature and humidity controlled air for spot process applications.
Accuracy is within ±1%rh and ±0.1°C – a level which until now has been unachievable on a consistent basis. Air volumes are adjustable from 110 litres per second to 200 litres per second.
|
|
DESCRIPTION:
Air conditioner conceived to cool and ventilate terraces, night clubs, tents, working areas, vegetable warehouses, gardens, etc., where it is necessary a breeze of fresh and humid air to comfort people or for food conservation.
Completely ecological equipment which only needs water connection and a single-phase electric connection for working.
FUEL:
Water
APPLICATIONS:
Ideal equipment to cool and humidify premises that range from 165 to 275 m3 approximately.
|
|
DESCRIPTION:
Coolers conceived to cool and ventilate small and medium-sized premises where it is necessary to have mobile equipment to cool concrete working or machinery areas.
It can also be used for conditioning farms and greenhouses. It can be installed in the interior of the premises or on the wall with its base shelf (it can be used with opened doors and opened windows.)
FUEL:
Water
APPLICATIONS:
Ideal equipment to cool and humidify premises that range from 340 to 625 m3 approximately.
|
|
|
|
Air conditioning
