|
|
|
Wide area radiant heaters can be mounted to radiate in any direction and can reliably operate, with no reduction in radiant output over the life of the heater. The lightweight building block approach allows for a modular installation which is easily expandable. One-piece bonded construction resists damage from vibration and shock. These heaters also have a lower operating cost with up to 80% of the input energy transmitted to and absorbed by the work material.
|
|
|
Convection Heaters distribute the warm air by relying on the difference in density of the heated air rising above the cool air and creating a convection current. The forced air heater forces air over very long distances and is usually the choice for heating larger areas. Similar to the sun’s heat, infrared heating heats people and objects rather than air or space. Radiant heat is less affected by drafts and large air movements. When using overhead infrared to heat an entire building, direct radiated heat from the heater passes through the air to heat floors, walls, machinery and people. These heated objects then transfer heat to the air by natural convection and secondary radiant heat. Radiant heat generates no noise, fumes or flames.
|
|
Innovative Plaque Heaters with a range of outputs (manual version) or fully modulating (Automatic version).
EASY & SAFE:
- Maximum efficiency in all conditions
- Very flexible mounting, even angled, maintaining high output radiant performance
- Considerable Infrared performance even when installed at maximum height
- Can be mounted on walls to maintain maximum radiant heating cover.
|
|
A RANGE OF CERAMIC GAS HEATERS ADAPTED TO ALL HEATING NEEDS IN INDUSTRIAL BUILDINGS (height of 4 meters and more).
Use: Industrial buildings, Churches, Sports halls, Car service, Terraces, ...
- a large range of heaters from 2,5 to 27 kW and more.
- a choice of 10 powers for a comfort in all type of buildings whatever the
hanging height of the heaters
- a double-speed option for a better comfort, particularly in well insulated
buildings
|
|
GADD
Fully assembled with double heating elements that provide twice the heat intensity of the GAD but with less even heating. Suitable for applications requiring contact-free heating.
|
|
Hanging irradiation heating unit suitable for heating big environments.
Including a heat generator with power from 35 to 300 kW and a radiating circuit with average surface temperature of 200-250°C.
The circuit layout is optimized according to the environment to be heated .
It is the best solution for huge environments where a good level of thermal comfort is required.
|
|
OHA radiant strips are especially fitted for infrared heating of industrial, commercial and sports' buildings up to any type of height. They are on the contrary especially fitted for very high buildings which require large radiant surface with lower surface temperatures.
OHA system does not move the dust in the air, it does not take any space on the floor and its maintenance is extremely reduced. The characteristic of the gas combustion head in premix and afterburning at low NOx emission and high efficiency. The radiant pipe circuit diameter 200/300mm assure a high thermal emission. A special insulation above the radiant strips raises further the radiant yield on the floor.
|
|
2 solutions available : Radiant heaters « U-tube » (U) or linear (L)
Alimentation Natural Gaz or Propane, horizontal or inclined
4 sizes 13 / 22 / 35 / 50 KW
Option : Régulation, stainless steel reflectors, double skin, dilatation rings …
Various accessories : Regulation kit, fume kit, gas conection kit ... etc
|
|
Equipments suited for all environments with great height (form 4 to 20 meters) or with high thermal dispersion.
It includes a burner unit and a heat exchanger tube which reaches the temperature of 400 ÷ 550 °C., providing a very high radiation efficiency, also by means of the reflecting cover located over the tubes, which focuses the thermal flow downwards.
By means of a centralized equipment control system it is possible to heat only the areas concerned by operations
|
|
The INFRA radiant module is the most classical expression for infrared heating for industrial buildings, sportshalls, ware-houses, poultry farms and glasshouses. The machine is made up of a burner working with forced induction in premix type Baf, with a multi gas head, exhaust fume electro fan, heat exchanger made up of special heat treated steel radiant pipes for high temperature; stainless steel reflecting metallic parabole and support hangers. It has low thermal inertia, and can heat single zones also with limited dimensions activating single modules, it does not move the dust in the air, does not take any space on the floor, it heats the bodies but not the air, so this means that the lower is building insulating, the higher are fuel savings that are achived with infrared radiant tubes.
|
|
Evolix 250 - Sheath erasing with burner gas outside
Comfortable: temperature sheaths 200 °C
5 burners from 35 to 300 kw, length of the network of sheath up to 324 Mr.
Sheath monotube linear with generator 300 kw.
Buildings of great volume and up to 14 m height.
Buildings requiring a burner outside (maintenance, fire hazard...)
|
|
Radiant tubes Infra
Heating by radiation
Apparatuses INFRA of THERMIGAS can be suspended on the frame via chains or of ropes or be gone up out of mural bracket.
Components
- burner and extractor out of separate boxes facilitating the assembly and demounting and allowing indifferently to assemble one or the other on the ends of the pin.
- steel tubes with easily dismountable elbow, the whole being painted in workshop using a painting high temperature.
- indeformable and unbreakable steel self-supporting quality.
- stainless steel reflectors easily nettoyables. These reflectors comprise, on each side over a length a fold with 180° avoiding the sharp edges.
|
|
The VAPORAD steam radiant panels are used to heat industrial or civil buildings that are particularly concerned with fire prevention.
This system is able to completely fulfil the requirements of a system that must run silently and not cause air movement, heating both large and small spaces.
The lack of air movement and the reduced heat stratification keeps operating costs particularly reasonable.
The steam panels create a greater heat output compared to panels heated with hot water and guarantee a larger amount of diffused heat per radiant surface
|
|
|
|
|
|
Proheat Air is the new standard for heavy-duty truck air heaters, quietly delivering constant and reliable heat in cold weather environments. Available in 2 and 4 kW models, its high-efficiency design reduces overall vehicle emissions and engine wear by eliminating the need to idle the engine to heat the sleeper cab. Proheat Air saves fuel costs for fleets and operators while helping drivers comply with local idling restrictions. A digital remote panel provides comprehensive and precise control of Proheat Air from anywhere inside the truck cab.
Air Heater Features
- 2kW (A2) and 4kW (A4) models available
- Built-in temperature sensor for safety and control
- Ultra-quiet operation
- Optional diagnostic software kit available
- Two year warranty
Digital Control Panel (DCP) Features
- Backlit LCD display
- Easy set-up and control
- At-a-glance display of heater status
- Temperature, time, and power
- Stores multiple timer events
- Surface-mount design
Optional Components
- Proheat Monitor (Diagnostic Software Kit)
- Temperature sensor
- Heater mounting plate
|
|
Modulam AP - Autonomous stainless module for constitution of ceiling with laminar flow
Flow: 600 to 1250 m3/h.
3 sizes: 6-6, 9-6, and 12-6.
Final filtration (to be ordered in addition): H14 and U15.
2 versions of the ventilator: with alternative course (traditional motorization) or continuous (self-latching of the puffed up flow whatever the level of clogging of the filter).
Constitution of autonomous ceilings with laminar flows for obtaining cleanliness class ISO 5 (according to IN ISO 14644-1) in zones with environments controlled: phramaceutic, agroalimentary, plasturgie...
|
|
Exhaust air system:
The exhaust air ceiling is a closed structure which complies with the hygienic requirements of VDI 2052, a regulation issued by the Association of German
Engineers, and BGR 111, a workplace health and safety regulation issued by German Trade Associations. The type of construction prevents the accumulation
of soot in the hollow space above the ceiling. The exhaust air chambers of the hoods can accommodate various types of fume extraction equipment with
grease separators. Their installation does not require
any tools.
|
|
|
|
|
|
VENESSE Comfort is manufactured an easy-to-use air curtain with new insulation technology that allows us to deliver the quietest operation even during high performance. The maximum acoustic pressure value at 3 m is 55 dB (A) when air output is 5500 m3/h. The air curtain’s height is 2.5 meters, and it is intended for doors as wide as 7.5 m. It is produced with an electrical filament heater in two performance versions (24 kW and 36 kW), as well as with water heater and air-only versions. The air curtain is equipped with an anchor stand that can be attached to either side of the air curtain for determining its installation position and connections. The air outlet is equipped with a composite system of easily adjustable lamellas that allow effective adjustment of air output direction. The water exchanger has two air release valves that also serve as draw-off valves to allow easy air release or purging. The air curtain is offered with electronic controls that can operate up to six curtains. In this mode, each air curtain reacts individually to the door switch that is connected to it. The VENESSE Comfort air curtain comes in standard white color (RAL 9010) or can be custom made in any RAL color, as well as stainless steel.
SPECIFICATION
- Electric heater, water heater and air-only versions
- Height: 2.5 m
- Air output up to 5500 m3/h
- Output for door widths up to 7.5 m
- Insulated cover, guaranteeing the quietest operation, 55 dB (A)
- Two-sided, left-right design
- Connects from the top or bottom
- Easily adjustable air lamellas
- Easy access through removable service cover
- Easy mounting on stand
|
|
|
|
|
|
We are glad to inform you that Systema S.p.A. has introduced in its range of products the "RENEWABLE ENERGY PACKAGE".
This complete product is an Absorption refrigerator-thermic System created for the external installation.
Its power supplyies can be:
- gas;
- hot water produced by solar concentrators and collectors;
- fume-steam heat recovery systems;
- fumes and hot water of a cogenerator.
Thanks to a cogenerator, Renewable Energy Package, becomes a CCHP system (combined cooling, heating and power) for the production of hot water, cooling water and electricity.
This preassembled OR ENBLOC package is composed by an Absoprtion Chiller, a cooling tower, a cool and hot water storage, pumps, filters, mixing valves and a control panel for the management of the complete system.
Systema S.p.A. designs, produces and commissions the Renewable Energy Package in its industrial plants.
One of the most important advantages is that our company offers a complete high-tecnology system to be installed outside, according to the particular requirements of the customer.
|
|
DESCRIPTION:
Hot air heater that operates with solid waste, as for example dry wood, coal, husks, cardboard, etc.
Since it is an equipment which uses natural elements as a fuel, it can be classified as an equipment of biomass.
The range is composed of a 69kW model.
For technical specifications and a complete description, go to "READ MORE" and download "DOWNLOAD TECHNICAL INFORMATION ".
FUEL:
Wood, coal, husks, etc.
APPLICATIONS:
Whatever premises that need a heating system in which the fuel to be used is wood or a similar material.
|
|
DESCRIPTION:
Hot air heaters that operate with solid waste, as for example dry wood, coal, shell, cardboard, etc.
There are two series; EP series and ALLMAT series.
EP SERIES
Industrial hot air heater of 50kW and 100kW.
Its features are the following ones:
- Manufactured with steel sheet.
- Helicoidal fan (EP-050) and centrifugal fan (EP-100) with security protections.
- Big access door for introducing the solid waste.
- Smelting grid for the solid waste layout.
- Refractory bricks all over the equipment for containing the heat driven away by the equipment.
- Thermostat with automatic start-up of the fan in order to avoid impulsion of cold air.
ALLMAT SERIES
- Domestic heater for small premises.
- Helicoidal fan located on the inferior part of the equipment.
- Completely insulated equipment for avoiding the heat radiation.
- Big load access door located on the superior part of the equipment.
- Air regulator for a proper combustion.
|
|
| ... products without technical information |
| |
|
|
Heating equipment
