|
|
Insulation Removal Vacuum – Versa-Vac 13 Packs 13 HP For Faster Insulation Removal
Now you can make those messy, time-consuming insulation removal jobs go even faster with the Versa-Vac 13. The Versa-Vac 13 insulation removal vacuum is designed for fast, profitable removal of fire, smoke and water damaged insulation from attics, sidewalls and crawl spaces. Versa-Vac 13 features:
* 13 HP Kohler OHV motor
* Cellulose processing capacity of 3453 cu. ft./hr., 4799 lbs./hr.
* Fiberglass processing capacity of 4659 cu. ft./hr., 3345 lbs./hr.
Handle Bulky Insulation Materials Efficiently & Productively
Blown-in insulation and plaster chips – wet or dry – are removed quickly and efficiently. Material intended for recycling can be conveyed directly to your spraying machine for reuse. Waste material can be discharged directly into 75 cubic foot disposable collection bags or directly into a Dumpster® receptacle.
|
|
Insulation Removal Vacuum – Versa-Vac 15 – Top Of The Line 15 HP Workhorse
When you need the most power and handling capacity you can get to take care of the toughest and messiest jobs, the Versa-Vac 15 is your best choice. The Versa-Vac 15 insulation removal vacuum is designed for the fastest, most profitable removal of fire, smoke and water damaged insulation from attics, sidewalls and crawl spaces.
Versa-Vac 15 features:
* 15 HP Kohler OHV motor
* Cellulose processing capacity of 4347 cu. ft./hr., 6042 lbs./hr.
* Fiberglass processing capacity of 5849 cu. ft./hr., 4199 lbs./hr.
Handle Bulky Insulation Materials Efficiently & Productively
Blown-in insulation and plaster chips – wet or dry – are removed quickly and efficiently. Material intended for recycling can be conveyed directly to your spraying machine for reuse. Waste material can be discharged directly into 75 cubic foot disposable collection bags or directly into a Dumpster® receptacle.
|
|
Portable Vacuum Systems
- Capacity: 36L (9.9 Gal.) or 64L (17Gal.)
- Voltage: 230V/50 Hz or 110V/60 Hz
- Ideal for use with Dynabrade® Vacuum-Ready Air Tools for removal of dust and debris
- Variable Vacuum Control based on type of tool and work surface
- Vacuum starts and stops with use of Tool. Saves time and conserves energy
- H.E.P.A. Filtration: Retains 99.97% of ultra-fine particles, as small as 0.3 microns in diametre
- Two-Tool Setup function allows more efficient use of workshop space
- Electronic Thermal Protection device prevents overload of motor
- "Tilt 'n Clean": Drum tilts easily backward for quick emptying
- Two Innovative 6m (20") lightweight coaxial hoses
|
|
|
|
|
|
New range of Nilfisk backpack vacuum cleaners
Nilfisk-Advance has introduced its GD 5 / GD 10 range of back-pack vacuum cleaners. Aimed primarily at cleaning contractors and institutional maintenance departments, these units complement the company’s existing backpacks to provide productive and ergonomic cleaning in all applications.
The GD 5 / GD 10 backpack vacuums were recently evaluated in an
independent set of test studies conducted by the Sweden-based Två
Ergonomer testing and ergonomic consultancy bureau. The study
compared the Nilfisk model to three other internationally recognised brands of backpack vacuum cleaners. In its report, the bureau concluded that the Nilfisk GD 5 / GD 10 rated “better than rivalling backpack
vacuums on all design criteria”. The ergonomic evaluation further noted the importance of the Nilfisk unit’s lighter weight and overall harness design in minimising stress and strain on the body.
Additionally, the Nilfisk unit achieved higher productivity rates in the studies carried out. The ergonomically advanced harness design was mentioned as being an important factor in allowing work to be carried out at a faster rate.
|
|
|
|
|
|
SANTONI's Industrial vacuum Cleaners' range includes feature filled sturdy machines, with state-of-the-art technology, that out-performs all its competitors.
The basic or CLASSICAL range of vacuum cleaners from SANTONI includes : Dry Pickup industrial vacuum cleaners, and Wet-n-dry pickup industrial vacuum cleaners These vacuum cleaners are based on vacuum motors from the best sources in the world for these kind of motors, such as AMETEK, LAMB ELECTRIC DIVISION, USA Some of the important features of these rugged industrial vacuum cleaners are:
Cyclone effect pre-filter - it takes out most of the dust from the air before the dusty air hits the main filter. The large filter is made out of synthetic fine filter media which does not allow any dust to pass through it. The tank is made out of 6 mm thick plastic to last a life time The machines are mounted on rugged metallic trolley for easy movement. A whole range of standard and optional accessories available to take care of any cleaning application
|
|
The LM691 unit was created to solve any problem connected to handling liquids in professional or industrial environments.
Designed by using the most modern engineering tools, LM691 is a mix of design, high quality materials and patented technology.
By simply pressing a button, this user-friendly unit automatically sucks and discharges the liquid through the same hose thus providing the ideal tool for any professional use, being a unique product in its field.
|
|
127
At last, a compact single vacuum with all the features of larger model.
Mod 127 is a compact 2 singlephase motor industrial vac. It's available in L M H versions where classified dusts have to be removed according to the EN 60335-2-69. It's also available in Stainless Steel: just container or container and filter chamber.
|
|
137 is conceived to operate in industrial environments. It
is provided with the latest technologies to grant maximum
reliability and best performance.
This model is particularly suited to recover shavings and
oils from working machines in metalworking sector, debris
in the building/ceramic sector, nap and waste in the textile
sector, dust and grains in the food/cereal sector.
137 can also collect corrosive substances, using the
stainless steel bin and, if necessary, the stainless steel filter
chamber.
|
|
|
DM and Mistral are the compact ranges of industrial vacuums, combining mobility and reduced dimensions with industrial quality and resistence: star filter, dropp off container, manula filter shaker etc. Available in wet & dry or dry version, optional HEPA filters, explosion proof and toxic dust certificates.
|
|
New MTL 202DS vacuum cleaner: extra high filtration, compact, single-phase, 2 motors, nnovative filtration system, class M (Option H - absolute filter).
The model has the best features in term of filtration, in a compact design that makes it easy to handle and to move. Ideal for application in the surface treatment, building industry, bakeries, mechanical, chemical and pharmaceutical industry and many others.
|
|
The new threephase model 3508W, suitable to be used in many industrial sectors, allows a continuous growth of safety and profitability.
CFM considers this vacuum the leading model of its range, as it can solve all the problems concerning the cleanliness of the work environments. The modularity distinguishes the 3508W, which can be used for different applications.
New absolute filter, new electrical filtershaker, new accessories compartment, new upstream safety filter, and new bagging methods: these are some of the new features of this machine.
It is available in two versions: with major airflow or with major depression.
|
|
Threephase industrial vacuum for trims and waste. It is used in packaging, food, textile and phamrmaceutical productions.
Versions:
- painted version (R 305 V)
- stainless steel version (R 305 V)
|
|
Mistral PHARMA is a the new Delfin unit for applications in the pharmaceutical, cosmetic, food and high tech industry. Designed in order to provide reliable continuous duty extraction on high tech production machinery, where the slightest failure or imperfection can seriously damage the production cycle, Mistral PHARMA provides some winning key features:
- outstanding filtration (HEPA / ULPA / H / M Class),
- compact dimensions, very low noise level,
- continuous duty “round the clock” maintenance free motor,
- stainless steel AISI304/ 316 construction,
- ATEX Explosion proof options.
Such features, certified by world renowned testing institutes, enable Mistral PHARMA to be one of the very few vacuum units approved and allowed into highly demanding, quality concerned industries such as the pharmaceutical, food and electronic industries.
|
|
|
The DG range is a complete range of heavy duty industrial vacs, able to handle the heaviest and trickiest materials. Automatic filter cleaning devices, optional cartridge filters with reverse pulse cleaning, extra vacuum (up to 6000 mm. WL), lifting devices. Certified versions for ATEX explosion proof and suction of toxic dust.
|
|
RIBO, thanks to its 40-year experience in this sector, offers a complete range of industrial three phase vacuum cleaners, from 0.44 to 22 kW, available in different models and executions, suitable to be used in any condition.
These models are also available in ATEX configuration, as per EEC/94/09 regulations (ATEX regulations), in II 2G/D and 3G/D category, fit for use in classified zones 1,21 and 2,22.
Reaffirming the well-established characteristics of QUALITY, RELIABILITY and ROBUSTNESS, RIBO gives to these machines 5 YEARS WARRANTY.
|
|
Motor / Turbine 1x4000 / 400 / 3200 W / V mm / H2O
Air flow 380 m3/h
Tank capacity 100 l
Tank material Stainless steel
Max Filter surface area 1,8 m2
|
|
|
|
|
|
A range of heavy-duty industrial vacuum cleaners that can be run virtually non-stop round the clock.
Available in a range of 4 models, i.e. HVC-3, HVC-5, HVC-7.5 & HVC-10, and with exceptional features such as very large filter area and external filter shaking device, etc. these machines are meant for industry where cleaning is done under tough conditions for long working hours. Adaptability with ULTRA Filters.
For the industry that requires heavy-duty continuous rating industrial vacuum cleaners SANTONI offers a full range of machines that are not only rugged and virtually maintenance-free, but also perform like untiring work horses.
In the industry where the conditions are either hazardous or require non-stop or long hours of cleaning ordinary vacuum cleaners based on high RPM universal motors can not foot the bill. Take for example LPG cylinders manufacturers, who have to clean the interior of the LPG cylinders - each one of them - day in and day out, no ordinary solution would work. These LPG cylinder manufacturers have found the right answer - SANTONI’s HVC range of vacuum cleaners.
|
|
The structure of this threephase version is the same as the CFM 3156 model but it is larger in size and higher powered (2.2 kW or 3 HP) in order to offer increased performances with a greater filter area.
|
|
For very heavy duty and continuous service. This threephase vacuum can be connected to the centralized general cleaning or pneumatic conveying systems used in various sectors such as the agricultural-food production or metal-working industries. Many optionals facilitate work where the vacuumed materials are particularly heavy or in large quantities. The electric filter shaker is standard supply.
Versions
- version with the cartridge filter (3997 C).
|
|
ECO-OIL series by Nilfisk-CFM is composed by two models: EC-Oil 13 (1,3 kW) and Eco-Oil 22 (2,2 kW). How do OIL models operate?
Oil, liquids and swarf collection is achieved using an oil
resistant rubber hose. The liquid part is seperated from
the swarf - which is trapped in the swarf container - and
sucked into the tank; inside the tank there is an automatic
level control which cuts off the power when the tank is full.
At this point the liquid can be pumped back into the machine
tool through a pump, while the swarf container can be
emptied manually.
|
|
Easy access to hard-to-reach areas quickly with the amazing portable Madvac 61 vacuum litter collector. It fits on a pickup truck or hitches as a trailer and sucks up windblown trash from landfill fence lines, parking lots and parks.
|
|
The VALNET is a compact vacuum vehicle designed for cleaning and pumping dry products in bulk. It can vacuum in the lowered or raised position. It can be driven without an HGV licence.
The VALNET :
- Improves cleaning productivity
- Reduces machine and equipment maintenance
- Improves the safety of your personnel and machinery
- Contributes to the cleanliness of industrial locations
ADVANTAGES
- Does not require a heavy goods vehicle licence, a normal driving licence is sufficient.
- High vacuum power : up to 20 t/h
- Compact
- Exceptionally quick and simple to use
- Self-sufficient and easy to manoeuvre
- Empties cleanly into big-bag, drum, containers...
- Tank capacity: 0.6 m3
- Three-cam rotor (Roots)
|
|
Supersucker - Industrial Vacuum Equipment
The Supersucker® M-Class offers state-of-the-art vacuum technology incorporating a modular design that provides low maintenance, heavy duty vacuum efficiency, super airflow, and the best performance in the industry.
M-Class stands for Modular design that gives you flexibility in selecting the correct body size and number of separators and baghouses to meet your particular job requirements. Supersucker® is known throughout the industry as the easiest vacuum loader to Operate, Clean & Maintain.
|
|
Dustex 25
Vacuum Cleaner 1300 W
Order no.: 9 20 20
Model: Dustex 25
Input 1 300 W
Air flow 3 300 l/min
Max. vacuum 230 mbar
Tank volume 24 l
Socket connection max. 2 000 W
Weight 7,0 kg
Cable with plug 6 m
|
|
|
With more than 20 years experience, Delfin provides a complete range of industrial vacuums (more than 60 models). Mobile or fixed, electrical (1phase or 3 phase, 1 to 33 HP) or air powered, certified for explosion proof (ATEX Zone 1, 2, 21 and 22) or toxic dust (H / HEPA filtration); Delfin is also specialised in designing and implementing central systems and customized machines.
|
|
|
|
|
|
Professional series:
a complete range that understands models with headings to one, two and three motors for powers up to 6 Hp. To use him in every sector for dusts' aspiration, solid and liquids. Numerous particular accessories make also them functional for every demand understood thin and toxic aspirations of dusts.
Industrial series:
a complete range that understands models with powers up to the 30 Hp. Also studied on purpose for serious and particular jobs with continuous operations.
They climb on whirlwind special combined to induction motors. They are endowed with capacious containers and cyclonic devices of demolition of the dusts. Filters of generous dimensions and realized with material special they guarantee an autonomy and efficiency of use notable.
Reliability, constructive quality and safety, are at the base of our products.
Special series:
Battery aspirators
Backed up aspirators
Aspirators in version anti-inflamating
Aspirators for dusts thin or toxic
Aspirators for dusts warm of ovens
Aspirators for oils and shavings
Pneumatic conveyors
|
|
|
|
|
|
HeoloS industrial suction units cover the broadest suction requirements of solids, fluids and dusts, thus completely changing the suction systems. Do you want to find out how?
Simple but genial, the heart of the HeoloS line that represents the final solution to the problems of industrial suction is based on a reversed flow system.
- HS Series SUCTION OF SOLIDS
- HSD Series SUCTION OF DUSTS
- HSP Series SUCTION OF GREASE AND EMULSIONS
- HSE Series SUCTION OF FLUIDS
- HSC Series COMPRESSED AIR SUCTION
- HSB Series SUCTION WITH CONTINUOUS BAG
Configuration
The HeoloS line is configured as follows.
1. TWO FILTERING UNITS
The entire range of HeoloS suction units is fitted with two filtering units:
- primary in class M.
- secondary in Hepa class.
2. STAINLESS STEEL STRUCTURE
It is standard on the entire HeoloS, range, and brings an added value assuring sturdy, reliable and long-lasting units.
3. RELEASE SYSTEM
The innovative release system of the drum assures the suction of large quantities of material that can be disposed of quickly.
4. MANEUVERABILITY AND STABILITY
HeoloS suction units allow the operator to control the unit very easily also with a full load.
|
|
|
For almost all types of application for professional contract cleaning, Hako can offer interesting solutions to your cleaning problems e.g. wet and dry vacuum cleaners with tank capacities of up to 55 liters, single-disc and polishing machines of various sizes and capacities, carpet cleaning machines and spray extraction machines.
|
|
Since 1968 manufacturer of industrial vacuum cleaners and vacuum technologies for industrial applications, RIBO has always paid particular attention the the safety of its products.
From over 20 years RIBO designs and manufactures machines fit for use in dangerous environments, as per enforcing law.
The range of industrial vacuum cleaners as per EEC/94/09 regulations (ATEX regulations) features single-phase, three-phase and compressed-air vacuum cleaners , up to 11 kW, for safe vacuuming od dust, liquids and shavings also in potentially explosive atmosphere.
RIBO ATEX series are certified in 2G/D and 3G/D category: therefore, they are fit for use in classified zones 1/21 and 2/22.
|
|
Mazzoni offer includes a complete range of industrial wet and dry vacuum-cleaners.
Please, contact us to receive a personalized offer!
|
|
|
|
Industrial vacuum cleaners
