|
|
Construction in stainless steel AISI304 or galvanized sheet iron varnished before.
Internal dimensions standard model mm 1000x1680x2100 (capacity of 2 people) Glass doors all height provided with spring device to automatically close a door.
Opening direction as per client's specifications.
Adjustable blowing out nozzles Stream management of the staff fulfilled with locking system for doors and traffic lights.
Automatic unlocking system for doors in case of black - out.
Manual button to unblock emergency doors Internal lighting
Display with alphanumerics to formulate the access codes and times of "washing" Optional drilled floor platform for hard applications.
|
|
The Air Showers are designed and produced to remove contaminating particles from personnel entering a Clean Room; the nozzles located at the sides and the top deliver high speed jets of air, previously filtered by means of high efficiency filters, which remove the contaminating particles deposited on the person's clothes.
Appliances:
Clean Rooms and Laminar Airflow Systems for the Microelectronic, Electronic, Optical, Mechanical, Aerospace, Pharmaceutical, Medical industries and Hospitals.
|
|
|
|
|
|
Portable Safety Station for Personnel Protection
The LabGard® NU-813 is a Class I Biological Safety Cabinet that is an exceptional value and offers personnel protection for work in process where other cabinets are not appropriate choices. The NU-813 is a generation of exceptionally quiet enclosures that can be used with a micro-computer based balance. The open front allows room air to enter the hood, flowing past the operator into the work access opening, providing an air barrier which minimizes contaminants generated within the hood work zone from migrating into the room. The small cabinet size means it can be strategically placed for convenient handling of aerosols and particulates of low to moderate risk assessment.
The NU-813 automatically exhausts filtered air back into the room, or can be coupled from the exhaust collar to the building exhaust system, making the cabinet suitable for work with compounding powders. When used as a Containment Cabinet provides personnel protection for handling aerosols and particulate matter of low risk assessment. This configuration employs a 99.99% efficient HEPA filter. The NU-813 can also be used as a Ductless Fume Hood providing personnel protection from solvents such as those employed in cytology. This configuration uses either a Purafil® filter or a Charcoal filter.
The NU-813 is ideal for applications such as Life Science, Hospital and/or Pharmacy for the safe handling of powders or liquids, Animal facility for necropsy or other processes that require personnel protection.
|
|
|
|
|
|
Biological Safety Cabinet
The new CellGard NU-480 Laminar Flow Class II, Biological Safety Cabinet features the unique TouchLink Electronic Airflow Control System, a microprocessor module that establishes and maintains an optimum balance between the supply air system and exhaust air system through constant monitoring of airflow, using a digital dual thermistor airflow sensor and a digital differential velocity pressure flow grid. The information is received by the Electronic Control System to control both down flow and exhaust flow. The system maintains a complete diagnostic function and has remote contacts for remote sensing of various functions.
CellGard’s Decontamination Process - Decon 101, is a unique method to inactivate or destroy infection agents or neutralize toxic agents. This system uses formalin or liquid formaldehyde as the disinfectant agent and liquid ammonia as the neutralizing agent. The system is comprised of the Vaporizer, the Exhaust Canopy, with Vapor Collection Cartage and four [4] window clamps to insure a gas tight window seal. Activation of the system can be automatic using TouchLinkTM or done manually. The front hinged panel opens 30° for ease of manual cleaning.
The NU-480 is also available with Glass Side Walls which allows better viewing for Teaching and Educational Labs. Numerous ergonomically designed features for user comfort and adjustability: The new design gives you more leg room, service valves have been staggered on the sidewalls making them easily accessible and the base stand or base storage cabinet can accommodate an adjustable hydraulic lift to raise or lower the work surface to a full eight inches
|
|
AirClean Systems Class I Biological Safety Hood
Constructed from all white seamless polypropylene, AirClean® Systems horizontal laminar air clean benches are the ideal solution for Class I biological safety hood applications.
Features:
* UVTect™ microprocessor controller
* All polypropylene construction - NO MORE RUST!
* Seamless, smooth construction minimizes air turbulence
* Built-in fluorescent lighting
* All-white surfaces are easy to clean
* Meets ISO 5 and FS209E Class 100 clean bench standards
* 110V or 220V versions
|
|
BIGNEAT Class I cabinets draw air past the operator and exhaust through the top of the cabinet, a negative pressure is maintained within the cabinet ensuring containment integrity.
Built to European EN12469:2000 standard
Key features
Available as ducted or recirculatory filtration models (recirc model shown)
Efficient insulation, sound levels less than 55dB(A)
Internal illumination greater than 750 Lux
State-of-the-art electronic management system with airflow indicators and audible alarms
|
|
BIGNEAT Biological Safety Cabinets meet all the requirements of European EN12469:2000 Standard.
Great features for the comfort of the operator include:
Ergonomic design
Clear well lit view of the working area
Quiet operation
Easy clean surfaces
BIGNEAT products are built using only the best available materials and using the latest manufacturing techniques to give a quality, long lasting finish - equipment that will give years of consistent and reliable service.
|
|
|
ETRAF Range hoods with filtration for chemicals Large opening of work Hoods of mobile weighings Hoods Out of standard: Alarms flow weak digital Posting of the paramêtres into clear variable Speed of the ventilator Nombreux specific filters Filtres multi-applications Conforme Standard NFX15211 classifies I and II
|
|
|
|
|
|
Modular extraction hood: banish welding fumes to the past
Euromate, a specialist in innovative solutions for the extraction of welding fumes, has developed a modular extraction hood. This modular concept provides the best answer to all your welding fumes, cutting and gouging issues, where source extraction is impossible.
Often the extraction of welding fumes in hoods takes place in the middle, not always being very efficient. Some of the fumes will flow out at the sides of the hood – not being extracted at all. Therefore Euromate developed a side extraction framework, optimising the airflow considerably and thus improving the extraction’s efficiency.
As extraction takes place from the sides instead of the middle, more fumes are being extracted from the working area – creating a healthier working environment. Thanks to the well thought-out deflector plate, the airflow is controllable and minimizes sparks to reach the air-treatment system, decreasing the risk of fire substantially.
As the extraction hood of Euromate comes in modular parts, the extraction hood can easily be put together on the spot. It’s not a do-it-yourself kit, but it is not far of! The extraction hood can be suspended from the ceiling or used as a freestanding unit on aluminium legs – according to the environment you are working in. The legs are optional, available in 2, 2.5 and 3 meters and can be cut to requested lengths. The modular design comes as standard with eye bolts. Euromate offers a modular design from 1.5 m² up to 8 m². Expandable with various accessories, such as a lighting fixture incl. fluorescent light, aluminium legs and welding strips.
|
|
*THE USER IS PERFECTLY PROTECTED
The air released by the filter contains 100 times less pollutants than the acceptable limit values defined by the official safety authorities (this is to prevent the accumulation of the release of authorized toxics).
VERY LOW SOUND LEVEL
Only 49 dba !!
*TOTAL SAFETY OF THE OPERATOR
Hour counter associated to an alarm designed to remind the user to check every 60 working hrs. the saturation state of the filter.
*CONTINUOUS MONITORING SYSTEM OF AIR VELOCITY
Located in the natural vision field of the user.
FULLY TRANSPARENT DOOR & SIDE PANELS OFFERING A GOOD VISION
allowing for large movements within the enclosure, without opening the front door.
FULLY REMOVABLE SPILL TRAY
can be removed when needed, without dismantling the hood.
|
|
Collecting at their point of emission, the smoke and vapors (corrosive or not) emitted at the time of operations in:
Workshops: cleaning of parts to solvents, steeping with the acids, scouring, joining, welding...
Laboratories: chemical handling
ASSETS:
Articulated system: adjustable in height and directional in all directions.
Available on stock.
The connection of the hoods to a plastic centrifugal fan,
type ECN, dedicated to the corrosive vapor extraction, constitutes an effective and durable anti-corrosion unit
ADVANTAGES:
Circular or rectangular hoods
Removable transparent flexible thin straps of containment
All scopes of application: Laboratories, Workshops, any industry
|
|
Isles AirCleanTM workstations are engineered and manufactured with attractive contemporary styling and the highest quality construction. Recommended for any Class 100 requirement that does not produce by-products that can contaminate the worker or production area. Available as either vertical or horizontal flow models. These specialized workstations are constructed with cold rolled steel for durability and finished with powder coating for long lasting performance. Standard worksurfaces include cleanroom seal.
|
|
|
The F73A and F73B fume extraction systems provide industrial electronic control of welding and metalworking fumes in work areas. The F73A and F73B clean the air of industrial smoke and oil mists. Either source capture techniques or ambient air cleaning can be used to provide healthier working conditions.
|
|
The intelligent extraction hood!
REVEN® temperature and fume sensors enable perfect control of the exhaust air flow of extraction hoods. In normal large-scale kitchens, one, two or a maximum of three speeds are available to adjust the extraction system to the heat and fume concentration in the kitchen. An automatic control with sensors provides for far more efficient ventilation.
|
|
|
|
|
|
AirClean Systems Polypropylene Ductless Fume Hoods
AirClean®Systems portable ductless fume hoods remove toxins by filtration while protecting operators and the environment. Solid polypropylene construction with no pre-filtration metal components allows excellent corrosive chemical resistance. Coupled with AirZone™ baffling for proper airflow control, AirClean®Systems ductless fume hoods usher in a new era of quality filtration hood design.
Features:
* AirSafe™ automatic safety controller
* Vertical sliding safety glass sash
* Dual wall construction allows for front mounting of services such as water, gas, or electrical outlets.
FlowSmooth™ airfoil on sash lip promotes laminar airflow
* Polypropylene construction for excellent chemical resistant properties. The result - “NO MORE RUST” which allows for longer service compared to standard metal enclosures
* Wide range of activated bonded carbon, impregnated chemisorptive, and HEPA filters for containment of virtually any toxic vapor, fume, gas, and particle
* Integral vapor-proof fluorescent lighting system
* Available in 110V or 220V AC versions
* No duct required for operation
* Shipped fully assembled
* Meet and exceed relevant OSHA and ANSI Z9.5 standards
|
|
This range uses the very latest Chemcap™ filtration system that make these cabinets not only one of the SAFEST on the market, but also the most cost effective to purchase and to maintain.
Typical uses are in the laboratory are for removal of chemical fumes, vapours and when used in combination with a HEPA filter particulates as well.
Bigneat Recirculatory Filtration Fume Cabinets coupled with Chemcap™ filtration meet the world’s most stringent standards: The AFNOR NF X 15-211 and BS 7989:2001
No ducting or expensive installation costs
Model shown 4002 - 410mm wide
|
|
Features:
- Economical alternative to metal hoods
- Acrylic door offers unobstructed visibility
- Door opens to three positions for comfort and convenience
- Non-conductive, chemically resistant, corrosion proof
- Baffle directs air flow across table as well as vertically
|
|
|
An isolator can be manufactured in two different modes: in rigid or flexible material. We have designed an isolator with mixed material (plexiglas and transparent pvc) in order to allow both resistance and flexibility.
|
|
Inert Atmosphere Heating
Atmospheric Glove Boxes
• Integrated systems for auto and manual operation
• For use with nickel, titanium, superalloys,
stainless steel and refractories
• Replacement for hydrogen belt furnaces
• Reduces a typical 25-minute, quartz lamp
heating cycle to just three minutes
• Ergonomics increase operator comfort & safety
|
|
MX-2000 Glovebox Atmospheric Chambers
Features:
- Wide choice of control capabilities
- Range of vacuum pumps
- Sturdy, rugged, modular design
- Optional programmable logic
- Optional single or dual-column gas purification units
|
|
FEATURES
. Quiet operation, less than 50d(B)A and low power consumption.
. Portability of ductless fume cabinets enables their positioning in the optimum location, best for working and less walking around the laboratory thereby also substantially reducing risk from spillages etc.
. Filtration cabinets are safer for the environment, no pollution to the atmosphere, filters are removed and bagged for documented and accredited disposal.
. No ducting is required, therefore installation costs are kept to a minimum.
|
|
PROTECTION OF THE HANDLING
with an H 14 HEPA filter and a filtration efficiency of 99.999 %, particles of 0.3 microns or more can be retained.
AN ERGONOMY OF QUALITY
The ergonomy of the working apertures is unique. It enables the protection of the handling while allowing the operator to have access to the entire surface of the enclosure.
AN INCREASED HANDLING COMFORT
The work surface features a rounded edge for comfortable positionning of the arms during handlings.
A GOOD VISION OF THE HANDLING
An inclined front door and transparent sides increase the operator's vision comfort.
|
|
|
|
|
|
BIGNEAT manufactures enclosures for containment of robotics systems, for OPERATOR protection (LAOP) or PRODUCT protection (LAPP).
For bio-hazard and bio-protection we offer several cabinet types. LABS cabinets offer both OPERATOR and PRODUCT protection at levels of sterility and protection for most drug discovery applications. For more sensitive, or more hazardous applications Bigneat manufactures cabinets to Class II design, providing protection to the essential requirements of BS EN12469:2000.
The need for these types of enclosure is increasing because of the demand in the Pharmaceutical industry for rapid throughput and reliability of biologically sensitive processes and associated bio-hazards - Bigneat is Europe's Number 1 supplier of Robotics and Laboratory Automation enclosures.
Typical applications include for cell culture, cell screening, drug discovery, gene assays, high-throughput screening, rapid microbiological detection systems.
Special features of Biological Cabinets:
. Ducted or recirculatory filtration models available
. Excellent access for maintenance and servicing
. Emergency stop control
. Lighting and UV lamps included
Options:
. Electrical sockets
. Used tips chute
. Leaded acrylic for radiochemistry applications
|
|
AirMax™ Polypropylene Total Exhaust Fume Hood from AirClean Systems
AirClean® Systems AirMax™ total exhaust polypropylene fume hoods are manufactured from all-white, structural polypropylene. Polypropylene offers excellent chemical resistance. AirMax™ has a seamless design and allows for NO MORE RUST!
Features
* Microprocessor controller - displays real-time airflow
* All Contact Surfaces are constructed of polypropylene - NO MORE RUST!
* Flame-retardant polypropylene interior - Higher temperature working range than fiberglass
* Non-hydroscopic - won’t absorb moisture
* Smoothflow™ air foils for superb airflow performance - Minimizes eddy currents found on other fume hoods
* Large volume spill basin with solid work surface
Optional wet scrubber system is suitable for water soluble gases. Each scrubber is constructed from thermoplastics that are resistant to the gases being scrubbed.
|
|
*THE USER IS PERFECTLY PROTECTED
The air released by the filter contains 100 times less pollutants than the acceptable limit values defined by the official safety authorities (this is to prevent the accumulation of the release of authorized toxics).
VERY LOW SOUND LEVEL
Only 49 dba !!
*TOTAL SAFETY OF THE OPERATOR
Hour counter associated to an alarm designed to remind the user to check every 60 working hrs. the saturation state of the filter.
VERY COMPACT SIZE AND IMPORTANT INTERNAL HEIGHT :
only 610 mm - 24 1/5 length
747 mm - 29 4/9 height.
FULLY TRANSPARENT DOOR & SIDE PANELS OFFERING A GOOD VISION
allowing for large movements within the enclosure, without opening the front door.
FULLY REMOVABLE SPILL TRAY
can be removed when needed, without dismantling the hood.
|
|
LABOPUR® fume hoods for chemicals
Following its wide experience with safety cabinets and storage of dangerous products, TRIONYX-leading manufacturer of safety cabinets-uses its entire technical knowledge to design and manufacture its fume hoods LABOPUR®.
Fume hoods LABOPUR® were approved according to the NF X 15-211 standard, by a independant laboratory, MAPE, itself approved by the COFRAQ. The COFRAQ accreditation gives evidence of the technical skills of the test laboratory by the highest european certification organisation.
|
|
As with benchtops, laboratory sinks are an essential element of every laboratory. Sinks need to withstand acids, bases and solvents. For your individual requirements FRIDURIT Laboratory Technology offers laboratory sinks made from Technical Ceramics or Polypropylene.
Technical Ceramics is a high performance material designed to withstand the ongoing punishment of a modern laboratory environment.
Polypropylene offers joint free sink surfaces, sinks and system modules, which require no maintenance. Welded with no joints it is ideal for microbiological laboratories.
With our variety of colours and sizes we can satisfy our customers’ requirements. FRIDURIT laboratory sinks fit in every laboratory – school, university or industry.
|
|
AirClean Systems Vertical Laminar Flow Workstations
Optimal with applications that require a clean work area but do not involve hazardous materials. The AirClean Systems AC600 Series vertical laminar flow workstations are compact and light weight allowing for multiple “clean zones” within a laboratory.
Features:
* UVTect™ microprocessor controller
* Class 100 (ISO 5) vertical laminar flow
* 360-degree visibility
* Integral polypropylene base for easy cleaning
* All thermoplastic construction
* Built-in fluorescent light
* HEPA filter monitor automatically indicates when filter change is required
* Available in 24”, 32” and 48” widths
* Available in 110 V or 220 V versions
* Includes HEPA filter, intial prefilter and one ACASLIP slip hatch (in right rear)
Model Options:
AC632LF: 32" Wide
AC632TLF: 32" Wide, Tall Version
AC648LF: 48" Wide
AC648TLF: 48" Wide, Tall Version
|
|
BIGNEAT Laminar flow cabinets are designed to protect product or operating staff by maintaining a particle-free ultra clean zone. They can be used whenever a Class II cabinet is deemed unnecessary.
Laminar Flow Cabinets are available in two versions, providing horizontal air for operator or product protection.
All BIGNEAT Laminar Flow Cabinets are provided with a well lit diffused hidden lighting as standard and efficient sound insulation, which ensures the operator can use the cabinet for long periods without discomfort.
Performance
Bigneat cabinets complies to ISO 14644 - 1:1999 Class 5
Air is delivered to the worksurface at better than Class 100 quality
Highlighted Features:
. Comfortable to use, easy controls with well lit working area
. Excellent working access
. Easy clean surfaces
. Fluorescent tubes are concealed within the fan housing
. Working sound levels less than 55dB(A)
. LED airflow indicators and audible alarms for incorrect airflow condition
|
|
|
Horizontal Laminar Flow Standard: Work Plan INOX transparent side walls Electrical filter clogging alarm
|
|
|
|
Laboratory furniture
