|
|
Log and panel-cutting band saws
Heavy-duty, torsionally rigid design for the reliable and precise division of panels and logs. Short resetting times. Fast, simple saw band changeover.
The secret lies in the traversable saw frame, which takes up only half the space of a traversable table! And permits cutting lengths of up to 8m! Cutting range: 1600 x 1600 x 8000 mm.
|
|
Two columns horizontal bandsaw with movable carriage to cut bars and blocks of large sizes.
Suitable use in forges, steel stock holders and where a requirement of heavy duty bandsaw work is needed.
Equipped with two group of vices, one is fixed to clamp the piece in the cutting area and the other positioned at the end of the movable carriage.
The machine configuration ensures great versatility of use and loading possibility with any lifting means.
|
|
ZIP 30
Manual band sawing machine for solid and metal profiles.
Also steel, stainless steel, brass, aluminium, copper.
Robust, versatile and handy, for artisan metal works and professional duty.
One way miter cutting (from 0° to 60°)
Cast-iron sawframe on twin tapered bearings and ring nut to provide greater stability.
Precision blade-guide with hard metal pads, bearinga and anti-corrosion treatment.
Two cutting speeds.
Vice with quick lock lever.
|
|
XBE HEADRIGS
THE XBE IS A YARDSTICK IN TERMS OF FRAME
SINGLE-CUT or DOUBLE-CUT VERSION
* Diameter of flywheels 1400, 1600, 1800 or 2100mm.
* Hydraulic blade tensioning.
* Electric double blade guide arm.
* Top and bottom pressure blade guide
* Hydraulic braking of the bottom flywheel.
* Hydraulically-controlled blade guard.
* Protective cover.
* Rollers or chain belt integrated in the table (option).
|
|
STANDARD BAND SAW
FIXED STEEL TABLE NOT MACHINED - SOLID STEEL WHEEL
Braking of the blade in less then 10 seconds
More than 20 version available:
fixed or movable
energie 220 V ou 380 V
termical
PTO
mixed : electricitie + mounted
road trailer
|
|
Belt-Knife Blade Machine KMA 3055.01
Closed, modern designed machine casing in solid steel construction, pillar execution on the lefthand side, preventing doors, limit
switch protected. Slewable grey cast iron
table, flanged disk wheels vulcanized and
ground rubber coated, dynamicly balanced.
Precision roller guides on top and
bottom, upper guide height adjustable by a
handwheel, vibration absorbed spring suspension with knife blade charge indicator. Compact V-belt drive via three-phase current motor with safety brake, brake gear, motor protection with under-voltage release. Flow promising suction nozzle.
|
|
|
|
|
|
Gravitation Bandsaw ARG 220 Plus
GRAVITATION:
The band saw arm is lifted manually, the feed occurs by own gravity of the arm while a continuous control by means of the oil damper throttle valve is possible.
The ARG 220 plus model is one of the best selling band saws in all European Union countries!
Enormous saving of material as compared to outdated frame or circular saws. The kerf thickness is only 1.1 mm, the perpendicularity of the cut 0.1 mm and the incomparable cutting speed (up to twenty times higher) ensure fast return of investment.
High infinitely variable cutting range under the angle of 65° on the right and 45° on the left when the position of clamped material is constant.
The sturdy cast-iron frame and the entire concept of the machine ensure long life and accuracy of cut.
The industrial saw blade, size 27×0.9×2600 mm, is manufactured in a number of quality ranges so that all sorts of material may be cut.
The professional European worm gear motor enables to switch over between two saw
blade speeds, 40 or 80 m/min.
Automatic saw blade feed to the cutting position via an oil damper. The saw blade stops when the cut is completed. The saw head is lifted manually.
The three-side hard metal guide ensures the accurate saw blade guide.
Regulation of cutting emulsion supply. A tank with a high-duty European pump is installed in the machine base.
Fine regulation of saw blade feed speed to the cutting position. The sturdy base ensures a smooth run of the machine.
Machine dimensions 1400×660×1400 mm
Weight 250 kg
BEST SELLING MODELS: ARG 220 PLUS, ARG 250 STANDARD, ARG 300 STANDARD
|
|
Cut easily every fabrics, PVC, coated matérials, foamed products....
* 2 speed motor équipped with brake for a quick safety stop of the rotating blade
* Safety telescopic protection around the blade
* 2 models 740mm from blade to frame
* 1240mm from blade to frame
|
|
|
|
|
|
manual, semi-automatic to automatic
Pivot-type Machines
Especially suited for use in job shops. Important characteristics are: small foot print, easy and accurate miter adjustment, excellent cutting performance.
Double Column Machines
For higher demands and materials with tensile strengths up to 1400 N/mm2. The double-column design allows a better application of the needed feed force. Today’s state of technology are bevel spur gear drives as drive source in connection with a frequency-controlled saw motor, maintenance-free linear guides
Production Sawing Machines
Modern control technology with stored cutting data of all current materials. After entry of material-grade and number of pieces, cutting speed and feed rate are adjusted automatically. Machines with carbide blades cut high tensile alloys with tensile strengths up to 1900 N/mm2 economically . Due to a higher blade life and reduced cutting times, an amortization of the higher machine costs is achieved.
Large Bandsawing Machines / Block Bandsawing Machines
To cut plates from large size blocks and plates. Small to very large working ranges and table loads up to 40 tons.
Automatic machines and machines designed for notching available as well.
|
|
SUPER TRAD 350 AOCN EVOLUTION
Automatic band sawing machine with numerical control for solid and metal profiles. Also steel, stainless steel, brass, aluminium, copper. Robust, versatile for professional duty.
Multi-function digital controller with piece-counter, piece presetting, work timer, diagnosis and alarm messages.
Automatic control over cutting lenght and sawframe return stroke. Hydraulically powered multi-feed system moves the material into the cutting zone, reducing indexing time and speeding the cutting process. Adjustable sawframe downfeed speed.
One way miter cutting (from 0° to 45°). From 45° to 60° on semiautomatic mode.
Two cutting speeds or electronic speed variator. (Optional)
Cast-iron sawframe on twin tapered bearings and ring nut to provide greater stability.
|
|
|
The CM 370 CNC is a completely automatic machine at oil hydraulics operating that adds to the basic features of the semiautomatic band saw the advantage of material's automatic feeding. It's designed for the cutting of massive bars and profiles of small and medium dimensions with fix cut up to 90° or variable with manual set up to 60° right side. The reduced dimensions and the high reliability make the machine suitable for every company.
|
|
|
|
|
|
CNC Automatic Bandsaw ARG 300 CF-NC
Fully automatic NC band saw. The work piece feed, the work piece clamping and the arm forward and return movements are controlled hydraulically. The setting of number of pieces to be cut including the start-up is done on the control unit display. Fault reports are also displayed there. Maximal length of one-time feed 500mm. The cutting length is in fact unlimited because the control unit enables a multiple feed of the work piece. The sturdy design of the band saw arm and the individual components, the particularly robust feed system and the machine designs guarantee the accuracy and quality of the cut and a long life of the machine. The NC automatic machines are provided with a removable metal chips vessel. When the machine is set in manual mode, all the machine functions may be controlled separately. The pressure control devices of both the feed and rigid vice are included in the standard version equipment.
Enormous saving of material as compared to outdated frame or circular saws. The kerf thickness is only 1.1 mm, the perpendicularity of the cut 0.1 mm and the incomparable cutting speed (up to twenty times higher) ensure fast return of investment.
The sturdy cast-iron frame and the entire concept of the machine ensure long life and accuracy of cut.
The industrial saw blade, size 27×0.9×3110 mm.
The professional European worm gear motor equipped with a frequency changer enabling a continuous saw band control within 15-90 m/min.
The three-side hard metal guide ensures the accurate saw blade guide.
Machine dimensions 2100×1500×1600 mm
Weight 890 kg
|
|
The working quality does not mean the processing quality only, but it considers also other aspects such as productivity growth, exercise cost reduction and working place hygiene.
The TYROLIT diamond saws for conventional and fast lowering frames offer a precise and long lasting answer to the cutting requirements of all materials, even the hardest and most difficult to be sawn, such as hard colored marble and superabrasive or extra hard sandstone.
|
|
Varispeed type P (PNEUMATIC) is a highly professional fret-saw, versately, and excellent precision cutting.
The PNEUMATIC CONTROL of slope and down stroke of the upper clamp, consent to obtain a fast fixing of the blade and reduction in working times.
Varispeed is particularly suitable for fine inlay work, handcraft work, and marquetry, it can satisfay the numerous straight or finely shaper angle fretwork.
The elevation of the blade respect the working table is basic for cutting out the flet dies in the paper and cardboard industry.
ON REQUEST:
Varispeed can be supplied with THE AUTOMATIC COUPLING OF THE BLADE into the lower clamp, with an ELECTRONIC SPEED VARIATOR manual operated or by PEDAL POTENTIOMETER.
The large and strong working top, allows a millimetre TILTING INCLINATION UP TO 45°.
|
|
|
Sawing machine to fixed table and gantry furnishing devised for the cut of heavy pieces much and great dimensions. It allows the vertical, horizontal and oblique cut in order to operate correctly in the cut of lingotti and forged pieces as also large blocks for steel traders.
|
|
Born from technical and engineering ability developed over the past decades.
This machine is a big automatic vertical bandsaw specially designed to cut carbon-steel and stainless steel plates. Thanks to the sophisticated and sturdy blade guide, longitudinal and cross cuts are possible without any repositioning of the material. The vertical clamps on the machine also permit cutting of stacked material.
|
|
STAR CARRIAGE
NEW MODEL WITH EXTENDING CLAMPS
RESINOUS or HARDWOOD
* Pneumatic or Hydraulic.
* Opening 800 or 1000.
* Clamps opening 800 or 1000mm.
* Movement on round column Ø120.
* Triplex chain drive.
* 4-position extending clamps.
* Double clamping pressure.
* Centralised lubrication.
* Slab FLIPPERS.
* SINGLE OR DOUBLE LOG TURNERS.
* Serrated chain with a 38.1mm pitch.
* Electric motor.
* DRIVE CARRIAGE 37 to 60 HP.
* Drum Ø340 or 565mm.
* Cable Ø16 or 22mm.
* Safety brake.
* Ergonomic control panel.
* Air-conditioned cab.
|
|
When the going gets tough
Large bandsaws from Behringer
Unadulterated power – our high-powered solutions for large, heavy workpieces. Reliable, precise and extremely hardwearing.
The optimum solution when the going gets tough
Highly stable design
Extreme load-bearing capacity up to 100 tons
Outstanding durability
Unsusceptible to faults
Wide application range
Heavy-duty large forged components
Ships’ crankshafts
Turbine shafts
Large-scale tools
Metal blocks, etc.
Wide range of machine variants
Machines with roller conveyors: Workpieces are transported on heavy-duty roller conveyors
Table variants: Table is pushed with the workpiece through the fixed saw frame
Gantry design: Saw frame travels over the fixed workpiece
|
|
STANDARD EQUIPMENT
24 V illuminating attachment.
Welder included
Blade grinder
Emergency stop switch
Digital readout tachometer
|
|
Features
3/4 HP TEFC induction motor – quiet, smooth running belt drive delivers power to resaw up to 6 in. thick oak
Heavy duty construction – cast iron table and frame minimize vibration, precision balanced cast aluminum upper and lower wheels, steel wheel covers and heavy gauge leg set
Unique features – micro adjust on upper and lower blade guides for precise tracking, wheel cleaning brushes prevent dust build-up on wheels, built-in dust collection port, on-board additional blade storage
User-friendly controls – high visibility indicators and comfortable Sof-Touch™ on knobs help make adjustments easier. Large paddle switch with safety lock-out
Specifications
Input: 3/4 HP TEFC induction, 10/5 Amps., 120 / 240 V
No Load Speed: 2,700 FPM
Blade Widths: 1/8 in. – 3/4 in.
Blade Length: 93-1/2 in.
Table: 14 in. x 14 in. cast iron
Table Tilt: -10° – 45° right
Frame: cast iron
Throat Width: 13-5/8 in.
Depth-of-Cut: 6 in.
Tool Weight: 178 lb.
Includes
3/8 in. blade and leg set
|
|
|
|
|
|
SUPER TRAD 380 SO DIGIT
Semi-automatic band sawing machine for solid and metal profiles. Also steel, stainless steel, brass, aluminium, copper. Robust, versatile and handy, for professional duty.
Multi-function digital controller with piece-counter, piece presetting, work timer, diagnosis and alarm messages.
Adjustable sawframe downfeed speed.
Cast-iron sawframe on twin tapered bearings and ring nut to provide greater stability.
Precision blade-guide with hard metal pads, bearings and anti-corrosion treatement.
Two cutting speeds.
Large and round working table.
The digital controller offers three different operating functions:
Semi-automatic cutting cycle: manual vice adjustment through handwheel - semi-automatic start through pedal switch or control panel switch - the machine carries out a complete cutting cycle including vice locking, sawframe downfeed, cut, sawframe return and vice opening.
Manual cutting cycle: manual vice adjustment through handwheel - material vice locking through switch key - sawband start through gripswitch - manual sawframe pull down and cut - material vice opening through switch key.
Multi-Mode cutting cycle: manual vice adjustment through handwheel - manual approach of the sawframe to the material - cutting cycle start through gripswitch including vice locking, sawframe downfeed, cut, sawframe return and vice opening.
|
|
|
The CM 370 S is a completely semiautomatic machine at oil-hydraulics operating that adds to the basic features of the manual band saw the advantage of material's automatic cutting cycle. It's designed for the cutting of massive bars and profiles of medium dimensions with angular cutting up to 60° right (RGT). The reduced dimensions and the high reliabilitymake the machine suitable for ever company.
|
|
Band cutting off machines
Semi-automatic machines
Capacity 90° mm : 220
Angle cutting : Right 30°
Capacity 30° mm : 85 x 85 - Drive in Kw : 0,5/0,7 - Blade dimensions in mm : 2450 x 27 x 0,9 - Working height in mm : 1000 - Overall dimensions in mm : 800 x 1500 x 1900 - Uses : Band cutting-off machine with gravity downfeed perfectly suited to sawing work in locksmith's, general engineering and maintenance workshops, it allows straight and mitre cutting of solid materials and profiled sections until 30° right. - Standard equipment : Clamping by eccentric handle, blade tension control by electric sensor, gravity downfeed. - Optional features : Variable speed unit, pneumatic vice, mist cooling, infeed and outfeed roller blade
|
|
BMSY 650DG Semi Auto. Mitre Horizontal Bandsawing Machine
The capacity of the machine is 600/1000 and projected for fast cuttings straight or with angle . Sensetivity of the machine lets cutting with percentage angles. 650 DG NC has PLC system and open to future developments. Touch panel supply easy usage. You can easily find the failure, follow the cutting process or choose the opsions with control panel menus. Rollers on the table are designed for easy movement of the materials on machine. Automatic blade tentioning reduces the failure at cutting process. Blade is under control by hydraulicly and magneticly. The bow goes down fast until see the material so it gain time at cutting different dimensions of materials. Turn table obtains area disposal , no need to change the angle of the material, changing the angle of the bow is enough
|
|
BMSY 440 DGH
Our Double Coloumn bandsawing machines are ideal models for changable cutting quantities with angle cutting. Cutting with +60° right, -60°left degree is possibble with turning the bow. It is the biggest model of its type with 400mm/610mm flat cutting at 90 degree angle and 440 diameter cutting. Cutting is hydraulic and the bow rise up automaticly at the end of cutting. Material should pushed manual until the lenght-stop and cutting repeat.
|
|
|
|
|
|
Bandsaw ARG 640 S.A.F.
Bandsaw ARG 640 S.A.F. - Double column hydraulic semi-automatic machine with linear guidance. Maximum cutting diameter is 640 mm, flat material up to 1.100mm width. Sturdy construction of the machine with circular double column design band saw arm guiding. The arm moves on a linear guidance. Gradual cut angles setting of 60° while the position of clamped material is maintained. Machine is equipped in basic version with following accessories: frequency changer which provides speed setting for the band saw in the range from 15-90 m/min. double-sided automatic band saw pressure regulation into the cut according to the characteristics of cut materials vice pressure regulation according to the characteristics of cut materials hydraulic movement of saw blade guide (while setting the diameter of sawn material) electrically powered cleaning band saw blade brush spray gun hydraulic saw blade straining from centrally controled panel automatic chip displacement thanks to worm chip conveyer.
Machine can be fitted either with band saw blade 41x1,3 mm, powered with 5 kW engine which is suitable for cutting of profile materials or with larger blade 54x1,6 mm, powered with 7,5 kW engine ideal for industrial cutting of full materials. Band saw blade is at an angle of 5° against the surface of the vice.
Machine dimensions 3780×2260×2050 mm
Weight 4200 kg
|
|
Semi-automatic machines – universal and flexible
Made for mitre cuts and steel profiles. Impressive output and cutting range.
Every cut a masterpiece of precision
Optimum positioning accuracy for right/left mitre cuts
Also for large cutting widths
For wide-ranging different angles
Amazingly versatile
Highly flexible, easy-to-operate angular adjustment
Troublefree adjustment to individual requirements
Wide-ranging different transport systems for simple material handling
|
|
SHARK332 SXI evo
One model only to take place of the two leading models of its class: SHARK332 SXI and SX. Taking after the first one the high performances and from the second...the price !!!
Technical features::
Hydraulic unit equipped with high efficiency electro-valves and high pressure (200 bar) hydraulic pump;
Main electronic control of the machine made by new generation of microns and located completely inside the main control box;
Control box positioned on the front side of the steel base with a 180° swivelling which allows the operator to position it wherever needed;
Visualization by digital display of alarms, diagnostic, machine operations (cutting time, piece counter, blade motor amperage, head position, blade speed, blade tensioning);
Predisposed to be connected to SMV3000/3000 PRO;
Manual and semiautomatic-dynamic mode: STANDARD.
|
|
|
|
|
|
Bandsaw ARG 500 PLUS S.A.F.
HYDRAULIC SEMI-AUTOMATIC MACHINES S.A.
The whole cutting cycle clamping the work piece, switching-on the saw band, cutting, saw blade stop, raising the arm to the initial (adjustable) position, opening the vice - takes place after depressing a single switch. This, in connection with a hydraulic feed, substantially increases the cutting productivity, especially in full materials. Individual control of all functions. Manual work piece feed. S.A.F. versions are equipped with stronger and frequency changers, which provides for an optimum speed control of the saw band between 20 and 90 m/min. The optimum setting of the saw band speed improves the machine productivity, the accuracy of cutting and the saw band life. A vice pressure control device is also included in the standard version equipment.
ARG 500 PLUS S.A.F. machine with the most advanced conception in regards to band saw arm and the whole machine as such, is allowing cutting of large profiles even under an angle. The range of cutting angle is 60° right and 60° left. The complex sturdy construction of the machine guarantees precise cuts in large cross-sections . It offers a long durability of band saw blades. Each machine is equipped with frequency changer which provides speed setting for the band saw in the range from 20-90 m/min. and with vice pressure regulation. Band saws are ideal for the heavy industries and nonstop production lines in these there is a demand for cutting of large material cross-sections . Band saw blade is at an angle of 3° against the surface of the vice.
Machine dimensions 3000×1600×1750 mm
Weight 1530 kg
|
|
Horizontal bandsawing machines
Capacity 90° mm : 280
Angle cutting : Right 45°
Jaw height in mm : 145 - Power in Kw : 1,9 - Cutting speed in mm/mn : 35 et 70 - Working height in mm : 745 - Overall dimensions in mm : 1800 x 900 x 1850 - Uses : New, simple and sturdy horizontal bandsawing machine perfectly suited to sawing work in medium-sized workshops, it permits straight or mitre cutting of solid materials of any kinds, tubes and profiled sections. - Optional features : Adjustable stock stand, infeed roller table and discharge stray, mist cooling - Norm : CE
|
|
|
|
Sawing machines, Cut-off machines: 
