|
|
KKS 401 NA - Fully automatic universal cold sawing machine
KKS 401 NA is ideally suited to the processing of flat, angle and solid materials as well as tubes and special profiles. A turntable for acute mitre angles, automatic calculation of cutting speed and sawblade feed, as well as different drive variants and magazines for preliminary material storage, make this machine a real allrounder.
High performance and efficiency combined with simple handling
Short cutting times and cycles: automatic cutting height adjustment, rapid return stroke of sawblade and synchronised procedures
CNC control for preselection of cutting angle
Graphic display with touch screen monitor
High level of automation by automatic material feed and sorting of trimcuts/end pieces and cut-offs
|
|
Series of newest advanced models of Mikrosam's CNC machines for processing marble, granite and stones. This CNC machines has been designed to offer maximum flexibility and much opportunity for machining of marble, granite and stones. Traditional qualities combined with the most advanced technological innovations that were already implemented have made our machine ideal solution for marble, granite and stone industry.
High productivity machines, ideal for drilling, milling, 2D and 3D modelling, lettering, engraving, internal and external edging, bevelling, grooving, cutting with strait and convex disc.
|
|
CNC vertical sawing machines, with HSS circular blade, to cut steel solids and sections up to 180 mm diameter
|
|
EDGER - OXIA
SIMPLE, COMPACT AND VERSATILE
* 4 variable products.
* Boards and planks.
* Sturdy.
Options :
* Chipper.
* Waste separator.
* Automatic infeed.
* Sawing from above going downline with protective tunnel at exit.
* Effective, safe holding of the wood thanks to 5 pressure rollers and 1 chain belt.
* Very good sawing quality and thinner kerf saw.
* Fast blade changing.
* 1 to 4 movable blades positioned by servo-motors + 1 fixed sleeve.
* Diode lasers.
* max. cutting height: 125 or 150mm
* Pass width: 1000mm
* Speed: 10 to 110 m/min
* Motor 55kW to 160kW
* Weight : 6000Kg.
|
|
Sawing with maximum efficiency
With automated operation including material transport, higher volumes can be sawn faster and at lower cost. A flexible sawing plant from Behringer reduces throughfeed times by up to 50% and considerably improves part availability, particularly where widely varying parts are being cut.
It operates on a practically unmanned basis - around the clock. The entire functional sequence is automatically monitored and controlled. Cutting range: up to 430 mm.
|
|
|
The cutting process, with the precision cut-off saw takes longer than with the normal abrasive cutters, because of the low speed. The sample is fixed to its support and put on the wafering blade, then it will be sectioned without altering its structure, thanks to the combination of the force of gravity with the variable loads applied.
|
|
V-CUT
CNC cutting centre with 3 controlled axes, designed for cutting profiles made of
aluminium, PVC, light alloys in general. V-Cut loads the extruded section and cuts it, then unloads the finished part all in fully automatic mode without need for operator
attendance.
The powerful and versatile software can handle predefined cutting lists, optimizing them to minimize wastage. The cutting head allows cutting at +/- 22°30' and intermediate angles.
|
|
|
|
|
|
The TK 804/3 model features an automatic machining and cutting system for aluminum profiles and it is designed to minimize the manual intervention of the operator during the machining cycle, allowing the operator only to load/unload profiles.
The machine comprises a multi-spindle combined unit, complete with 3 controlled axes, where it is possible to install a maximum of 8 electric-spindles to perform milling, drilling and tapping operations on 4 sides of the profiles before they are cut.
The machining line comprises:
In-sequence loader
Loading table with a 3 axis CNC pusher
Labeling machine (optional)
Multi-spindle combined unit
Cutting unit
Conveyor belt
Unloading table
Thanks to the versatility of its components the TK 804/3 model can meet the manufacturing needs of every customer: profiles loading/unloading systems, clamping, handling and machining can be customized according to the characteristics of the workpieces, to the working cycles and to the type of machining to be performed.
The high automation of the TK 804/3 model significantly reduces machining times while improving the production process.needs of each customer.
|
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we cut it !
Further saws, like Table saws, Mitre saws, Double mitre saws, Notching saws, Vee-notch and cut off saws, Automatic saws and Automatic saws with pusher cover our product range.
|
|
TK 145/10 PLUS Exceptional double mitre saw.
New version of the TK 145/10 model completed with 600mm diameter circular blades that increase its cutting capacity. It offers exclusive performances thanks to its ability of working on multiple angles, thus obtaining a high precision level while ensuring robustness and reliability.
Special fabricated and welded steel bed frame with finish machined,
complete with slideways for the mobile head.
Automatic descent of fully safety protections.
Head tilting from 22° 30’ to 90°.
Accuracy: ± 0,1 mm.
Blade motor power: 2 x 3 kW
Blade motor revolutions: 2800 rpm
Blade diameter: 600 mm
|
|
Item No. : DET-4SA & DET-4SAT & DET-6P
Product Name : Double End Miter Saw
MODEL: DET-4SA
CAPACITY
CARRIAGE Single rail
MAX. LENGTH OF CUT 48"
MIN. LENGTH OF CUT 12"
MAX. WIDTH OF CUT 24"
MAX. CLAMPING THICKNESS 4-½"
SAW
SAWBLADE DIA. 8"/10"/12"(optional)
SAW ARBOR Φ1"
SAWBLADE SPEED 3400rpm
SAWHEAD SWIVEL 360°
MODEL: DET-4SA-T
CAPACITY
CARRIAGE Single rail
MAX. LENGTH OF CUT 48"
MIN. LENGTH OF CUT 12"
MAX. WIDTH OF CUT 24"
MAX. CLAMPING THICKNESS 4-½"
SAW
SAWBLADE DIA. 8"/10"/12"(optional)
SAW ARBOR Φ1"
SAWBLADE SPEED 3400rpm
SAWHEAD SWIVEL 360°
MODEL: DET-6P
CAPACITY
MAX. LENGTH OF CUT 72"
MIN. LENGTH OF CUT 12"
MAX. WIDTH OF CUT 24"
MAX. CLAMPING THICKNESS 4-½"
SAW
SAWBLADE DIA. 8"/10"/12"(optional)
SAW ARBOR Φ1"
SAWBLADE SPEED 3400rpm
SAWHEAD SWIVEL 360°
|
|
Haffner technology :
- Profile table out of steel.
- Strong cast metal construction of sawhead.
- Big cutting capacity - 2 profiles can be cut simultaneously.
- Eeasy positioning by means of roller supported carriage.
- Double supported tilting device.
- Safe from clamping by 2-pressures sytem.
- Double supported saw feeding device.
- Cutting lengths 3,4 or 5,1 m.
- Hydropneumatic saw feed.
- Correction scale for outside dimensions.
- Left aggregate fixed.
|
|
|
Twin-blade mitre saw for notching board and panel corners. Equipped with two independent mobile fences for both square- and rectangular-section cuts. A vertical pneumatic clamp assures grip of the panel or the panel stack.
|
|
You cannot afford to risk any cut-off compromise? DREISTERN cut-off machines operate with every type of cutting process. Whether you wish to use saw units, shear units or punch units, you simply exchange the cut-off unit and you immediately have the ideal cutting process at your disposal. It is not important whether you require fixed tube or profile lengths or frequently changing lengths.
You will certainly appreciate the high cut-off precision. You will discover one particular characteristic after many years. DREISTERN machines never seem to age. They are designed and built to endure many years of hard work.
|
|
|
|
|
|
CONDOR 90 CNC HR electropneumatic automatic sawing machine to cut aluminium and light alloys, using a widia blade.
Besides in the automatic mode, it can be used also in semi-automatic cycle.
CNC machine with multimicroprocessor so as to obtain at 0°, on the same bar,32 different lots each of different lengths and quantities. The machine is supplied predisposed to operate together with the loading magazine CB 6000 for high production.
A FEW FEATURES:
2 pole motor at 2800 rev/min with double belt transmission
Widia blade with electrowelded hard metal plates diameter 300x32x3.2mm Z72 positiv rake, balanced and silenced.
Cabinet for electric and electronic fixtures with totally identifiable wiring.
Panel with low tension controls: polyester membrane keypad with tactile thermo-shaped buttons which give out an acoustic signal when pressed.
Control and function systems protected against in-going and/or out-going electrical and electromechanical phenomena.
DISPLAY: 40 characters read on sixteen lines so as to visualize technological parameters such as:
- number of cuts programmed and carried out
- blade thickness - length fed in each stroke
- cutting time
- ampermeter
- diagnostics and/or caution messages (approx.ly 80) visualized in the language of use.
Feeding system by means of screw/nut with recirculating balls and stepper motor, length 1000mm with feed in up to 9000 mm/min.
Minimum restpiece which cannot be fed in in automatic is 70mm.
Feeder carriage which has a sideways movement so as to feed in also deformed bars.
Automatic adaptive shearing stress control system with servovalve mounted directly on the cylinder.
Automatic device for blade lubrication which operates only while cutting.
Drawer to collect chips.
Chip conveyor is predisposed to mount a chip collector.
The headstroke, according to the dimensions of the material which has to be cut, is set directly from the control panel.
Acoustic indicator with flashing light in case cycle is stopped.
Machine predisposed for handling with movement equipment.
Service keys and instructions manual, for maintenance and spare parts list.
|
|
|
The low speed saw C100 belongs to the small manual cutting machines family, well known for their high precision in cutting small dimension samples; this is an essential requirement for all laboratories, where the quality of results is a decisive factor: the sample structure must be preserved from any damage which could compromise the following microscopic examination.
|
|
Board divide center Logicut. New screen operating with touch screen.
Type 2000
cutting length on request
|
|
|
|
|
|
FOR DEMANDING PROFESSIONAL WOODWORKERS AND SMALL TO MEDIUM INDUSTRIES
SC 450, NEW CIRCULAR SAW WITH TILTING BLADE FROM CASADEI
SC 450 is the new circular saw from CASADEI, a well known and long-established company which boasts broad experience in the woodworking machines field.
Simple, fast and precise SC 450 is offered as a solution either for demanding professional woodworkers or for small to medium industries.
The CASADEI SC 450 circular saw mounts a brand new sliding table with a sliding system running on ground and hardened steel guides, fixed through a mechanical bending system where no glue is used. The on-off switches for the blades can be integrated, as option, into the sliding table end: this guarantees a more functional use, especially during the panel loading operations.
The sliding table can be locked in any position along its length.
Furthermore the sliding table mounts a large-size squaring frame supporting work pieces, which is easy to remove in case of smaller size work pieces machining.
The SC 450 is equipped with a new cast iron saw unit, which slides vertically on smooth and precise round bars system.
The saw unit can tilt up to 45° on two solid cast iron trunnions, in the shape of a crescent.
The main blade maximum cutting height is up to 150 mm, even for solid wood machining, and can cut at 3 speeds: 2500-3500-5000 revolutions per minute.
Upon request, this CASADEI machine can be equipped with an electronic programmer controlling all the axis:
- saw blade lifting and tilting
- parallel fence adjusting
- scoring blade lifting and alignment
|
|
|
|
|
|
Universal combined machine 350 mm
Elite Serie: the Combined Machines for the professional woodworker. Technology, design, innovation and quality: 100% made in Italy. The Universal Combined Machines of the “Elite” Serie represent the TecnoMax solution for the handcrafts who are looking for a compact machine without renouncing a top quality end product. The rapid machining changeover, the possibility to compose the machine according to the one’s requirement, and the same performance of the single-machining models are the main qualities which characterize this new range.
The new saw unit is made of a strong cast-iron structure. It is tightly fixed under the table and can be tilted by means of two side supports (trunnions): these solutions grant sturdiness, rigidity and a perfect cutting result. Furthermore, on request, the unit can be equipped with scoring unit for an optimal cutting even on upgraded panels. The sliding table is made from extruded anodised aluminium with a closed, honeycomb structure. The carriage runs on an exclusive slideway system consisting of guides made from calibrated and hardened F550SX steel. The spindle moulder unit is designed to provide the maximum stability and rigidity under all working conditions. Top performance features include: a large-size, cast-iron moulder spindle; a large distance (230 mm) between the two bearings on the moulder spindle; the possibility to mount tools at a minimum distance (5 mm) from the first bearing.
|
|
Sliding Table Saw,Sliding Panel Saw
high precise structure is adopted in guide rail
easy adjustable scoring blade
straight line type guide rail
for kinds of artifical board,solid wood board,PVC board
customize woodworking sliding panel saws with special desire
Technology Parameter
1 Length of sliding table: 2800mm/3000mm/3200mm
2 Power of main saw: 4KW
3 Rotary speed of main saw: 4000-6000r/min
4 Diameter of main saw blade: 300/30mm
5 Power of scoring blade: 0.75KW
6 Rotary speed of scoring blade: 7000r/min
7 Diameter of scoring blade: 120/20mm
8 Max sawing thickness: 75mm
9 Guide rail: straight line type
Sliding Table Saw,Sliding Panel Saw
|
|
Item No. : PS-8 & PS-10 & PS-12
Product Name : Computer Panel Saw
HIGH PERFORMANCE PANEL SAW / MOD.: PS-8 . PS-10. PS-12
PS- 8 (2650MM LENGTH OF CUT)
PS-10 (3250MM LENGTH OF CUT)
PS-12 (3850MM LENGTH OF CUT)
1) HIGH SENSITIVITY OPTICAL FIBER SENSOR FOR SAW RETURN CONTROL.
2) HIGH-PERFORMANCE SAW MOTION CONTROL.
3) TROUBLE – FREE IC CIRCUIT BOARD.
4) EXTREMELY FAST CUTTING SPEED.
|
|
New: Veneer and Panal saw 3 in 1
"Cutting all-rounder"
The motto at this facility. Panel saw and veneer saw in one. Perfect tailored for the small - and medium company.
Standard incl. scoring saw, main saw with automatic saw blade adjustment and jointing unit
|
|
DIACUT 21OO / 22OO
Laboratory padsaw for curve and contour cutting
Internal cut-outs and contours:
These machines enable you to produce any imaginable cut-outs and reliefs in fibreglass, laminated paper and aluminium plates quickly and exactly, e.g.: cut-outs in fibreglass plates for the production of test adaptors or solder frames, rectangular, square or circular cut-outs for measuring instruments, displays, code switches in aluminium front plates or plastic housings, etc.
A clean, straigth cutting guide can also be achieved by manual guidance, as no delay is encountered because of the stroke movement of the tool, as is the case with rotating millers, for example.
A drilling table is integrated on the right machine side with which the outlet bore for the following saw cut in internal cut-outs can be produced.
CBN and HSS padsaw blades can be delivered as accessories for almost all materials.
|
|
|
|
|
|
The TS72 CNC cutting line is able to cut four different programmable lengths out of the same bar unloading in 4 different positions. Brush deburring, in-line measuring, washing systems and collecting devices are fully integrated. All adjustments are CNC programmable as well as the working cycle starting from a bundle loader (up to 4000kg), with bar selection, cutting and unloading.
TS72 has a capacity of O.D. 8mm to 102mm with a max. cutting length configuration of 1500mm - 3000mm - 4500mm.
Main features:
* One CNC programmable length stop provide the best material optimisation of 4 different length cuts out of a single bar.
* Automatic and efficient programming not depending from the operator's skills.
* TS72's programming selects for the operator the optimum working parameters for the best possible machine performance, from a complete and proven technological database covering blade speeds and feeds for differing materials, saw blade selection and material feed.
* The cutting head construction with hardened and ground helical gears and automatic backlash compensation guarantees longer blade life and its full exploitation, low noise levels and the very best cut quality.
* The material feed system and vice geometry assure the most positive clamping of the material during the cutting cycle whether the material is thin wall delicate tube or tough thick wall tube.
* During the material feeding process, the material is lifted away from the vice bed and vice jaws to prevent the material surface being marked or scratched.
* Blade life, even under arduous cutting conditions, is much improved by micro-lubrication and by turbo refrigeration.
|
|
K12-14MS, Metallurgical saw, 14" abrasive wheel. Great for Met labs! Contain the dust!
5 HP, 3 PH 1725 RPM TEFC motor.
External manual operation.
Dual moveable 4" screw vises.
Capacity 2-1/2" solid, 3" shapes.
Magnetic switch, low-voltage protection at switch, 24V.
Internal halogen light - 24V.
1" wheel arbor, 12" or 14" blade, (not included)
Dual coolant nozzles.
2200 spindle speed at 1725 RPM.
Flood coolant, 10 gal., 1/3 HP.
Dimensions L 39" x W 26" x H 60"
Enclosed wet cutting metallurgical saw.
Options: Power down feed #PH-14, Oscillation for large sections # OSC-14, door interlocks.
700 lbs.
|
|
| ... products without technical information |
| |
|
|
Sawing machines, Cut-off machines: 
