|
|
| Products 121 to 150 of 197 |
Bluid-in Zeropoint Quickclamping cylinder K10, K20, K40, square
Hydraulic release
Cover and piston hardened
Repeat accuracy < 0,005 mm
Assembling diameter: K10: Ø50mm, K20: Ø78mm K40: Ø102mm
Max. pull in force 40 kN (hydraulic)
Max. pull in force 30 kN (pneumatic)
Max. holding force 105 kN
Use:
Can be used as a single clamping point or combined with round installation Zeropoint Quickclamping cylinders in base plates, machine tables, clamping profiles, columns and towers, swivel bridges, machine pallets and clamping pallets. A square Zeropoint Quickclamping cylinder prevents the pallet from twisting. The indexing function enables positioning every 90°. Specially suitable for use in turning.
Note:
The installation Zeropoint Quickclamping cylinders have high holding and pull-in forces with very small installation dimensions. Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The Zeropoint Quickclamping cylinders are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. Square pallet for screwing onto the pallet see item no. 6370ZA.
On request:
- Installation diagrams on request
- Automation solutions such as media ducts, sensor of locking monitoring, blowing off and isolated applications |
|
Bluid-up Zeropoint Quickclamping cylinder K10, K20, K40, square
Hydraulic release (or pneumatic)
Cover and piston hardened
Repeat accuracy < 0,005 mm
Size: 85x85mm, 120x120mm, 150x150 mm
Pull in force 40 kN (hydraulic)
Pull in force 30 kN (pneumatic)
Holding force 105 kN
Use:
Can be used as a single clamping point or combined with round surface-mounted Zeropoint Quickclamping cylinders in machine tables, clamping profiles, columns and towers, measuring machines, assembly stations in connection with clamping flanges no. 6370ZB). Clamping flange size 20 for K10, size 40 for K20, for K40 integrated onto the housing.
Note:
Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The Zeropoint Quickclamping cylinders are mechanically locked in the clamped position. The ad-vantages of this are that there are no cumbersome lines and no danger of leakage. The hydraulic version has 1 connection for clamping / unclamping (G1/4 or G1/8). Square pallet for screwing onto the pallet see item no. 6370ZS.
On request:
- Automation solutions such as media ducts, sensor of locking monitoring, blowing off and isolated applications
- Can also be supplied with centering pins for quicker and more precise installation |
|
Bullet Nose Dowels
Locating Pin Shoulder Liners
Adjustable Locating Buttons
Locating Pin Liners
Bullet Nose Pins
Precision Expanding Dowels
Counterbore Tools / Drill Jigs
Pull Dowels
Drift Handles
Rest Buttons Ground
Fixture Jacks
Pull Dowels (Metric)
Adjustable Jack Screws
Rest Buttons, Threaded
Locating Pins, Relieved Slip Fit
Rest Pads
Fixture Keys, Sine
... |
|
Misumi is the NO 1 supplier of over 500,000 standard and customised components for Mechanical Factory Automation/Special Purpose Machinery, Press Dies and Plastic Mould. We delivery components europewide in averagely 6 – 8 days GUARANTEED DELIVERY from the day of purchase, stock items available from 2 days delivery.
Misumi components are different in that they can be configured to your need using our unique part coding system. Dimensions, materials and special machined requests can all be selected within the misumi system enabling engineers and designers to achieve a configured parts as standard with no extra machine costs. Standard items are also available via the catalogues.
All components can be designed using the Misumi CAD portal . Compatible with industry wide packages a designer can configure our parts at the touch of a button in up to 0.01mm, and download in seconds saving valuable design time, registration required.
To receive our extensive catalogue and save valuable time and money, visit our website or request yours today by clicking the request banner.
MISUMI – Precisely what you need. |
|
The clamp arm rotates 90° as it extends away from the work piece providing clearance and access for unload/ load operations. Double acting operation and standard magnetic piston offer positive cycles, durability and work piece detection features. Extruded aluminum body mounts directly and rigidly to equipment surfaces in a minimum of space.
Operation cycle:
1) Clamp arm extends (straight line) as it releases work piece from clamp loads.
2) Arm rotates 90° to full extend position.
3) When retracting, clamp arm swings 90°.
Model Code R = clockwise rotation, Model Code L = counterclockwise rotation.
4) With clamp arm in position over the work piece, it follows a straight line path to apply clamping force. |
|
Compact Pneumatic twist cylinders are linear motion compact cylinders with an internal cam that provides
90 deg swing motion.
Twist cylinders are ideal swing clamps for automated and semi automated assembly and work holding found in circuit board assemblies, medical devices, robotic cells, component assembly and other applications. Because of their compact size and versatile mounting, they also make unique conveyor stops, diverters and escapements. |
|
035 - SELECT Pneumatic Swing/Pull Clamp
StrongHold SELECT pneumatic swing/pull clamps are designed for applications not requiring hydraulic power. They are a rugged and simple design suitable for harsher applications.
1. Double acting in threaded body or lower flange mount styles
2. Range of sizes for maximum clamping forces from 50 to 430 lbs.
3. Swing motions in right, left or straight guided pull
4. Avaiable in 0, 45, 60 or 90 degrees of swing |
|
* double-action clamp with no footprint
* when released, the clamp arm is tilted by 90°,
so the ram or bolster surface is clear
* requires 30 or 40 mm aperture width on die
|
|
HORIZONTAL-HANDLE TOGGLE CLAMPS
VERTICAL-HANDLE TOGGLE CLAMPS
PUSH/PULL TOGGLE CLAMPS
Toggle Edge Clamps
LATCH-ACTION TOGGLE CLAMPS
TOGGLE PLIERS
AIR-POWERED CLAMPS
|
|
The grasshoppers EMILE MAURIN: New ergonomic handle Bi-matter!!
A very broad range steel and stainless!
The new grasshoppers EMILE MAURIN are provided with an ergonomic handle Bi-matter for a better comfort of use. The non-skid flexible part is in contact with the hand and the harder part in contact with the grasshopper.
These grasshoppers have also 2 other technical advantages: an articulation made safe with an integrated thrust and an arm out of U slightly widened to avoid the loss of the screw of plating.
The range of grasshoppers EMILE MAURIN is composed of:
thorough grasshoppers: with horizontal base plate, vertical or side; with full arm;
reinforced; with handle of safety, anti-reflecting
drawn grasshoppers: with horizontal base plate, vertical or side; with full arm;
with handle of safety, anti-reflecting
grasshoppers with sliding tube
grasshoppers with hook
pneumatic grasshoppers
And of course of many models are proposed out of stainless for specific uses in industries such as chemistry and agro-alimentary. |
|
Ganter from Furtwangen offers a wide range of Toggle clamps.
Vertical clamps, horizontal clamps, push-pull clamps, hook clamps, pneumatically operated clamps are an extract of a wide product range. |
|
Vertical
Hold Down Vertical 1000lbs max
This heavy duty clamp is available with solid bar and U-Bar construction. It accepts all 1/2-13 diameter spindles. The solid bar model is supplied with a 70901 bolt retainer. The U-Bar model is supplied with 70902 flanged washers. Spindle assembly 70903 must be ordered separately for both models.
Holding capacity: 1000 lbs. max.
Weight: 2 lbs., 7 oz.
Handle moves 67°, bar 120°
Solid Bar: 7/8" height, 3/8" wide
U-Bar: 7/8" height, 17/32" wide
Horizontal spindle adjustment: 3 1/8"
Spindle Thread: 1/2-13
Horizontal
Hold Down Horizontal 750lbs max
This horizontal clamp is available with U-Bar construction in a flanged or straight base. Supplied with a 70915 neoprene tipped spindle assembly. Both models supplied with a blue vinyl handle.
Holding capacity: 750 lbs. max.
Weight: 1 lb., 8 oz.
Handle moves 55°, bar 90°
U-Bar: 3/4" height, 7/16" wide
Horizontal spindle adjustment: 2 1/4"
Spindle Thread: 3/8-16
|
|
| Versatile clamps that give maximum clamping force with minimum operating effort. |
|
Horizontal and vertical zinc-plated steel clamps for light to medium duty applications.
High quality surface protection treatment, optionally available in stainless or other high grade steels for moist or underwater applications,
ergonomic pressed-on plastic handle,
robust fully riveted,
stainless steel and hardened bearings,
two part clamp arm for quick mounting and removal of the clamp pad,
internal stop for defined arm clamping position:
The Clamping Tools for Professionals! |
|
| WDS stock a huge range of Toggle Clamps in both Mild and Stainless Steel. Vertical, Horizontal and High Speed options are catered for in the range that is covered within the Standard Parts catalogue. For further details or a copy of any of the catalogues available from WDS visit our web site or call + 44 (0)113 290 9852. |
|
225 - Horizontal Hold-Down Toggle Locking Clamp
Minimum overhead clearance is required for this low profile clamp
1. 500 lb. capacity
2. Clamp supplied with neoprene spindle
3. Stainless steel and straight base models available
4. DE-STA-CO® Toggle Lock Plus versions available
235 - Horizontal Hold-Down Toggle Locking Clamp
Minimum overhead clearance is required for this low profile clamp
1. 750 lb. capacity
2. Clamp supplied with neoprene spindle
3. Stainless steel and straight base models available
4. DE-STA-CO® Toggle Lock Plus versions available |
|
FLEXITOL® Tolerance Compensation Systems
Under the name FLEXITOL®, Böllhoff offers a new family of systems for automatic compensation of production tolerances.
FLEXITOL® is used wherever production-related joining tolerances must be compensated. In this way, twisting or deformation during assembly of components is prevented. This Böllhoff innovation is valuable to the automotive sector, fabrication technology, façade construction, the furniture industry and railed vehicle construction. |
|
Main components in cast nodular peralite.
Grinding of all surfaces.Possible working positions: supported on the base, on the side or vertically on the head.
Suitable for working in horizontal and vertical machining centres.
Exactness of the clamping repeatability 0.01 mm with constant pressure.
High pressure hydraulic intensifier incorporated into the spindle, which keeps the clamping force for hours.
2.5/4 tons of force without stress and with manual operation.
Ideal for large clamping and long clamping operations.
Side windows for easy swarf evacuation.
Tombstones for twin vices see page 21 in our catalogue |
|
Leading vacuum clamping technology for CNC machines
The quality of the clamping system is decisive for the productivity and economical operation of a CNC machining centre.
SCHMALZ clamping systems are the intelligent answer to the problem of meeting the ever-increasing demands, today and in the future.
|
|
Advantages
- Pneumatic clamping with high forces
- Safety clamping RotoClamp Standard - if the air supply fails then systems claps
- The values of hydraulic clamping are reached and exceeded
- Low system costs in comparison to hydraulics
- Simple installation
- Compact design
- Suitable for all shaft sizes |
|
Bolts
Leveling Mounts
Screws
Micro Clamps
Studs
Nuts
Washers |
|
Low-profile clamps come in two basic models, one with a single-wedge and the other with a double-wedge construction. In addition, we offer a line of machinable jaw models for workpieces of irregular shape and a special model for casting and wire EDM applications
Standard models come with a hardness of 48-52 HRC and the jaws are serrated or smooth, depending on model. Both the wedge and the jaws are made of tool steel and are through hardened. Fastening operation involving one bolt (M5-16) ensures quick set up times.
|
|
- Repeatability ¡Ü 3 microns [!]
- Stable screw connection, no additional units and hoses required
- Vibration-absorbing and non-magnetic material
- Positioning elements cannot get stuck
- Lightweight material, better handling
- Scratch resistant, no bulging when damaged
- Integrated quick-acting screws
- Robust and easy to clean components thanks to simple
technology
- Unaffected by temperature
- No rusting to the machine table |
|
- Modular connecting element (hydraulic, pneumatic, mechanical)
- Hydraulic, double acting connecting element
- Hydraulic, single acting connecting element
Coupling elements to clamp and simultaneously centre workholding elements designed as a quick change system to shorten the set-up times.
o Referenced clamping of jigs and fixtures provided by repeatedly accurate placement at the "zero-point".
o For machining workpieces in several working steps on different machines.
In addition to the maximum of flexibility provided by Halder Zero-point Clamping Systems the way the system is designed (with the peg of the base element mounted pointing upwards and the connecting ring integrated on the jig) guarantees a high degree of production reliability, continuous accuracy, and soiling of the reference point is avoided. |
|
|
|
Locking elements, Clamping elements, Centering elements
