|
|
Bock Workholding's MonoQuad, MultiQuad and Hex Systems integrate the unique features of the Twin Vise into a clamping system for use on horizontal machining centers. They are available in an array of models ranging from 8-workpiece capacity to 16-workpiece capacity.
All Bock MonoQuad, MultiQuad and Hex Systems offer:
- Built-in single station adapter plate
- One piece column manufactured from high-strength aluminum
- Hardened and ground steel guideways
- Quick release reversible soft jaws
- Base plate included
- Bolts directly to Bock Locator Plates using DEXLOC Double Expanding Locator Pins.
- Also fits 80mm and 100mm grid patterns.
|
|
gripos-5A – The NC quick-action vices for real 5-sided processing
Record-setting rapid-action clamping
Unique and patented clampingaction with mechanical force amplification. Secure clamping
with only one lever movement of max. 160°.
Real 5-sided processing
GRESSEL offers a sophisticated assortment of high support jaws, which allow an excellent use of the full play of the axis.
In middle of the machine table
Compact, no cranking, no bevel drive. Hence free positioning, even in the middle of the machine table.
Quick dismantling
Only a few components. Quickly adjusted, positioned, dismantled and cleaned.
Modular and flexible
The modularity of gripos allows a conversion into various versions and solves almost every clamping task.
|
|
Bock Workholding's new Hex System is built for big time production! This 6-sided workholding system, with its 12 clamping stations, increases production capacity and reduces costs.
The Bock Hex System:
- Reduces part processing costs by machining on 3 sides of 12 parts
- Allows 120º tool access
- Increases unattended machine time and improves part throughput
- Only twin vise that allows full machining of the jaws - saving costs for additional jaws
- Quick change jaws lift off in one smooth action - no pins or special tools required
- Full jaw travel permits clamping of a larger variety of part sizes without re-machining
- The one piece aluminum column with hardened, ground steel guideways is strong & rigid yet light
- Bolts directly to Bock Locator Plates using DEXLOC Double Expanding Locator Pins. Also fits 80mm and 100mm grid patterns.
|
|
Balance clamping arm with hexagonal D28-05007-000
– Differential balance
– only in connection with multi-clamping edition tower.
– Stress approx. 20 kN
– very heavy execution
– to link up been suitable around heavy workpieces.
– fast and safe stretching with large
Elevation adjustment range
– powder-coated
|
|
The pneumatically operated Gemco Retractable Sleeves are designed for the dustless transfer of solids from one processor to another. These Retractable sleeves are available in telescoping rigid designs (usually stainless steel), or flexible boots, (usually white Neoprene). The telescoping models are used for one-way flows and flexible models used for bi-directional flows. The two pneumatic cylinders of the Retractable sleeve can be controlled locally, remotely or by automatic sequencing. Our sleeves are available in a range of finishes and coatings with a variety of stroke lengths and mounting configurations.
|
|
* retractable clamping rod, clamping jaw escapes from die
* horizontal clamping surfaces
* clamping force applies perpendicularly to clamping rod (no radial load)
* includes mechanical safety lock, so the die cannot drop from ram in case of pressure fail
* escaping rod prevents any jamming, even in the toughest applications, such as forging
|
|
AX / PS – Bench vices
AX, AXP and PS, precision work bench vices
Universal, powerful, rugged and smart.
The classics
Of durable nodular- or special cast iron, equipped with serrated or smooth jaws. With many accessories for all clamping work in workshop, factory or for mobile work places.
|
|
MULTI-POSITION PRECISION BENCH CENTERS :
The BARCOR SURFACE CENTERS is an ultra-precision, multi-position Bench Center designed specifically for Vertical as well as Horizontal use on your existing Surface Plate, CMM or Inspection Bench.
28 Standard Models provide a capacity from 3" between Centers with a 6" Diameter Swing to 20" between Centers with a 10" Diameter Swing. Smaller, larger and custom sizes are also readily available.
|
|
* clamp is fixed or slides in T-slot of press
* variable span up to 15 mm
* can be used on both bolster and ram
|
|
SLOTTED-HEEL CLAMP STRAPS
TAPPED-HEEL CLAMP STRAPS
SWIVEL-HEEL CLAMP STRAPS
DOUBLE-END CLAMP STRAPS
DRILL-SPOT-HEEL CLAMP STRAPS
STEP BLOCKS & CLAMPS
Forged Adjustable Clamps
Aluminum Adjustable Clamps
Forged U Clamps
|
|
Mechanical clamping elements:
- high clamping forces
- high operational safety
- simple manual operation
- compact, flexible design
|
|
Block Clamps
Jergens StayLock Block Clamps are multi-purpose utility clamps designed for many versatile applications. Block Clamps may be mounted for either vertical or horizontal clamping. They may be used with strap clamps or similar workholding devices for maximum adaptability (see illustration below). The Block Clamp plunger has a 1/4 - 28 thread on the I.D. for use with various contact points.
Retractable Clamps / Proximity Switch
Jergens StayLock Retractable Clamps are designed to allow quick change of molds in injection molding machines and die casting machines. The locking arm, which retracts into the clamp body for easy loading and unloading of a mold, is adaptable to clamp many standard mold slots. The Retractable Clamp is double acting and includes alternate clamp and release ports for easier hydraulic plumbing set-up. A Proximity Switch, which indicates the Retractable Clamp is in the extended or retracted position, is also available (see below).
|
|
Snap-Trap clamps can be fitted in seconds, reducing installation time by up to 80% compared with some alternative systems which require the assembly of up to 12 parts. Already widely used in the Norwegian sector, the clamps are highly resistant to corrosion and comply with the NORSOK offshore standard. Just two sizes of Snap-Trap handle the spectrum of metric and imperial instrumentation tubing diameters up to 25mm/1inch, avoiding the specification, purchasing, stocking and day-to-day handling overheads associated with existing systems - which can require anything up to 24 parts to provide the same solution.
A new dedicated fitting tool is now available for easily opening and closing the clamp's ratchet-based clamping mechanism - improving ergonomics compared with the option of using a screwdriver to apply the required pressure.
Made from stainless steel, Snap-Trap is a square component with a U-shaped body and a hinged top arm. As the arm closes, it progressively grips the tubing using a ratchet-style mechanism. The flexibility of this action allows each clamp to accommodate a wide range of tube sizes. The smaller 27mm-square Snap-Trap accepts 6 to 12mm or 1/4 to 1/2inch tube sizes; the larger 47mm-square clamp accepts tubes of 12 to 25mm or 1/2 to 1inch.
|
|
Series PA Clamps are ideal for automated part holding, and are available in one working day from receipt of order. Five sizes and left and right rotations are available for a wide variety of tasks.
Advantages: Simple design, compact size, low weight, long life, high clamp force, available in five sizes.
|
|
Universal swivelling and angle of inclination
– steplessly by means of scale of 0° – 225° adjustable
– hydromechanical wedging:
• absolutely maintenance-free
• Retaining strength to 5000 Nm torque
– with other system parts combinably
– horizontal and vertically usable
– powder-coated
|
|
ITW TekFast Brackets offer our customers unique, cost effective alternatives to traditional metal-formed bracketry.
Key benefits of our plastic bracket designs:
- Cost Effective - Plastic molded parts offer high value, low cost, yet maintain structural integrity.
- Part Number Reduction - Integrated fasteners reduce complexity
- Non - Corrosive
- Ergonomic - Snap fit, reduced installation efforts, user friendly designs.
- Performance - Designs suitable for high strength, high temperature applications.
- Function - Design flexibility offers solutions for virtually any application.
|
|
Locking units are capable of retaining forces in both axial directions. They are used in a wide variety of machines. In most versions the clamping is spring actuated, and hydraulic or pneumatic pressure is required to release it. Shaft diameters range from 10 to 250 mm. The respective holding forces vary from 0.1 to 1000 kN, depending on style and customer requirements.
If the device is used as a restraint device and emergency brake in machine tools, a special version KFHW is available. For this reason, all the external parts and sealing surfaces are made of stainless steel.
|
|
SPEEDY classic - mechanically / hydraulically
- Our most complete and versatile system
- available in 4 sizes with draw in forces from 5.3 to 30 kN
- Draw in- positioning - clamping - releasing- retraction, all these functions are integrated in a single element
- best suited for full automatic solutions
- decades have proven the wide range of applicability of this zero point mounting system
|
|
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
The slightly concave front surface and the rear finger grips guarantee an ergonomic position of the hand, allowing the operator to apply the maximum torque with the minimum force.
|
|
This product group covers mechanical clamping elements like T-Nuts, Fixture Nuts, Down-Thrust Clamps, Floating Clamps, Down-Hold Clamps, Spherical Washers / Conical Seats, Supporting Elements, Centering Clamping Elements, Clamps, Locating Clamps, T-Slot Clamps, Taper Clamping Units, Clamping Clamps
The new part "Compact Clamp with moveable clamping lever" can be used for universal application - in either horizontal or vertical position - in machined and raw work pieces.
- exact and position precise clamping
- ease of operation
- high clamping force at low torques, abrasion- resistant due to clamping
lever with bearings
- continuous, large clamping area
- clamping lever entirely retractable for hindrance-free exchange of work
pieces
- clamping lever with locating thread for diverse clamping elements, e.g.
ball-ended thrust screws (EH 2270. - EH 2272.), self-aligning pads (EH
2273./ EH 2274.),
- large adjusting range at constant clamping force
- easy and flexible fixing possibilities
- corrosion-resistant
- insensitive to dirt and chips.
|
|
Mechanical clamping elements:
- high clamping forces
- high operational safety
- simple manual operation
- compact, flexible design
|
|
Misumi is the NO 1 supplier of over 500,000 standard and customised components for Mechanical Factory Automation/Special Purpose Machinery, Press Dies and Plastic Mould. We delivery components europewide in averagely 6 – 8 days GUARANTEED DELIVERY from the day of purchase, stock items available from 2 days delivery.
Misumi components are different in that they can be configured to your need using our unique part coding system. Dimensions, materials and special machined requests can all be selected within the misumi system enabling engineers and designers to achieve a configured parts as standard with no extra machine costs. Standard items are also available via the catalogues.
All components can be designed using the Misumi CAD portal . Compatible with industry wide packages a designer can configure our parts at the touch of a button in up to 0.01mm, and download in seconds saving valuable design time, registration required.
To receive our extensive catalogue and save valuable time and money, visit our website or request yours today by clicking the request banner.
MISUMI – Precisely what you need.
|
|
The product range Workholding includes modular T-Slot Systems (V40 and V70) and Hole and Dowel Systems (L12 and L16) for the construction of clamping fixtures.
The large standard program is available from stock. The substantial clamping element assortment is included in the standard parts catalogue.
|
|
Low-profile clamps come in two basic models, one with a single-wedge and the other with a double-wedge construction. In addition, we offer a line of machinable jaw models for workpieces of irregular shape and a special model for casting and wire EDM applications
Standard models come with a hardness of 48-52 HRC and the jaws are serrated or smooth, depending on model. Both the wedge and the jaws are made of tool steel and are through hardened. Fastening operation involving one bolt (M5-16) ensures quick set up times.
|
|
The Alpha A-Pod was borne out of the Job Shop market where set ups were always changing and having a dedicated magnetic chuck on one machine was not practical. The A-Pods provided greater flexibility and quicker pay back. Due to the A-Pod's flexibility, customers began to discover other uses for the A-Pods.
The A-Pod is an ideal tool for the creative shop owner, so Tool and Die shops began using the magnets in place of hydraulic fixtures because magnets cost less, are more flexible and require virtually no maintenance. Unlike a chuck, the A-Pod is completely modular and has little impact to a machine's table weight capacity. A set of A-Pods can be shared between multiple machines.
Large plate manufacturer's discovered the benefits of the A-Pods over conventional magnetic chucks, because A-Pods provide sufficient clamping force and greater flexibility for less money and with significantly less weight.
|
|
|
The LANG Quick-Point clamping system provides exceptional advantages. Easy and reliable mechanical operation with highest positional accuracy make this holding system the best in the world. The lowest Zero-point clamping system of only 27 mm / 1.06 inch worldwide is also perfect for vertical machining applications.
|
|
PALLET FOR MACHINING CENTRE
ORIGINAL GERARDI PALLETS TO FIT 100% MAKINO,MAZAK,MORI SEIKI,OKUMA,MACHINES.
Solid cast iron cast G30 with double stress relieving heat treatment.Highest accuracy.
Inspection with 3D measuring machines.
AVAILABLE TYPES
Art.85
Grid pallet type with solid threads M16
Art.86
H7 t-slot pallet
AVAILABLE DIMENSIONS
400X400/ 500X500 / 630x630 / 800X800
Price all inclusive.
All accessories are supplied completely hardned and ground HRC 60.
|
|
Bock Locator Plates and Bock DEXLOC Double Expanding Locator
Pins serve as the foundation of your quick change workholding system. Whether using vises, modular components, or other fixturing, the Bock Locator System works well with all workholding systems.
- Repeat setups to within +/- .001"
- Locator Plates are available in a wide array of sizes, both in inch and metric dimensions.
- Bock Locator Plates are made of hard coated aluminum for a durable surface
- Alpha-numeric coded holes for an accurate and repeatable baseline reference
- Every hole precision bored to fit Bock DexLoc locating pins and threaded through for maximum versatility
- Brass protection plugs included for every hole
- Eliminate time consuming "dialing in" for every setup
|
|
|
|
Locking elements, Clamping elements, Centering elements
